Java, Netgear GS110TP and display device

Similar Questions

• Difference between the emulator and display device

  Hi, people.

  I have a weird problem that makes me nuts for a week now... Maybe someone has experienced this before, if I´ll explain my problem shortly.

  I m working on an application for mobile devices, using the Flex SDK to 4.6. Here is my xml settings:

  <>aspectRatiolandscape< /aspectRatio>

  <autoOrients>true< /autoOrients>

  <full screen>true< /> fullscreen

  <>renderModegpu< /> renderMode

  The app works perfectly on the device, but when running in the emulator of the ADL, every single object seems to have a substantive gap, because they were all higher than they should. The strange fact is that when I click in the area where objects should be, they respond perfectly, because they really are where they should be. It s just what they show in the wrong place.

  I have attached a screenshot to illustrate the problem.
  

  

  As you can see, the weird zone is covered with a kind of extended version of the image... I Don t know yet how to explain it.

  NOTE: After reading something in this forum, I just did a quick test, turning CPU GPU mode, and all appears well on the emulator... But I really need to be in GPU. Someone knows something about this problem with the GPU settings?

  Thanks in advance.

  This is a known problem, and the simple solution for now is to disable full screen while you test in the ADLS.

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• How can I display the printable two than non-printable ascii characters from a device and display it in a text box?

  Hello

  My send UUT to my computer via serial port of printable and non-printable ascii characters. The question is:

  (1) how to display all characters in a text box.

  (2) how can I display all these characters in hexadecimal format and display it in a text box?

  Thank you.

  Robert

  Text boxes can actually receive channels with printable and non-printable characters: nonprinting characters will be represented with a small square. For example, consider this code:

  tank has [512], msg [512];

  Create a string with embedded unprintable characters

  sprintf (one, "Hello: %c %c %c %c % c: World!", 1, 2, 3, 4, 5);

  Pass the string to the text box "such what."

  ResetTextBox (bH [1], b1_n, a);

  Format a hexadecimal representation of the string and add it to the text box

  FMT (msg, '\n%*d[zb1r16w2p0j1]', strlen (a), a);
  SetCtrlVal (Bosnia and Herzegovina [1], b1_n, msg);

  The result is as follows: the first line is the string passed "such what", what follows is the hexadecimal representation.

  

• When I click get mail, why my messages are automatically read, my tools, options, read and display, is defined no to read messages automatically?

  IM using windows 7 on a computer toshiba laptop. Tools, options, read and display, settings do not seem to
  to take effect.

  kasbr

  And your via IMAP and read your mail on another device and the State is synchronizing. Although some phones I understand making mail as read when you download it.

• Toshiba R100: External monitor as the primary display device

  Hello

  I would like very much to have my 17 "external monitor (1280 x 1024) selected as main display device, unfortunately, the option is grayed out in the display settings.

  Moreover, I want to run 1280 x 1024 on the built-in-monitor and the external monitor and then turn off the built in monitor, but it does not seem possible either; the resolution changes again in 1024 x 768, when I try to turn the desktop on the external monitor.

  I've updated the display driver.

  I hope someone can help.

  Niels Grau

  Hello

  AFAIK the Portege R100 has only 1024 * 768 under more resolution. It is therefore impossible to put the two monitors to 1280 * 1024. Sorry!

  Tried FN + F5 keys to change the output screen?

  Campino Bye

• Cannot install Hotkey utilities for display devices

  Win XP Sp2, Toshiba SPA40

  I have a problem with the installation of the Hotkey utilities for display devices driver. I can't run the executable TFnF5.exe, however, after "by clicking on" I can see it in the running processes, but it is not installed and Fn + F5 does not.

  I tried to run the tfnf5.cmd file but there is an error "could not determine the CD-ROM drive letter.

  Thnx for help

  Hi jack,

  If you install the Tools & Utilities CD that you got with your laptop then there must be a special note on the installation procedure. Before you install one of the tools, you must install common Modules. It is a very important for all tools & utilities module.

  First install of the common Modules and then try again with Hotkey Utility for display devices.

  I hope this will help.

  Good luck!

• M30 how installs-Hotkey utilities for display devices

  Hello

  How to install this driver I downloaded

  Thank you

  I want to be able to fn + f5 to swap the display devices

  Hello

  As far as I know first that you must install the driver for Toshiba screen devices change Utility.
  It's a change of version 1.1.0.0 display device and then you can install the Hotkey utilities for display version 2.2.0.0 devices.

  Good bye

• Portege M700 - 7004V Display Device change Utility does not

  Hi all.

  I have problems with the utility to change device display on my Portege M700.
  I am in charge of a school district with 110 Portege tablets, but I can't understand it.

  For some reason any when I press Fn + F5 (which is the default configuration to switch display devices), nothing really happens.
  The screen flickers very quickly as if she is still looking for another device. Press it again, the same thing happens.
  Press it again, the screen goes black (as it should), but even when nothing is displayed on the projector connected to him.

  On all the other 109 pills I, change display utility works very well.
  In fact, if you hold down FN and press F5, but continue to hold down the Fn key, a box appears and tells you which device you try to switch to.

  Here is my configuration:

  Windows XP SP3 (up to date)
  New version of:
  Intel graphics drivers
  Toshiba controls
  TOSHIBA Hotkey utility for display devices
  Toshiba display device change utility
  Toshiba Mobile Extension

  This computer is imaged from the same image that have other computers (which all work.)

  Is there something in the registry that toggles? Is there something in msconfig, that I can check? This problem is to get the best of me!

  Thanks to anyone with the time and patience to help!

  Hello

  To be honest, I put t know what might be the problem, but it is recommended to reinstall the necessary drivers.
  First of all, you need the common Modules!
  This tool must be installed first.
  Then you can try again to install the v2.0.1.9 change of display device. and then the Hotkey utilities for display v3.4.5.5 devices

  Also the display driver should be updated and if necessary check the update of the BIOS.

• Satellite L300D and display of compatibility of the video driver vga

  whatever that means anyway... compatible vga... He used woork when I download the harware throughr Control Panel and no games that I download do not work on my computer.
  Here are some statistics on my computer...
  ------------------
  Information System
  ------------------
  Time of this report: 14/06/2010, 13:31:16
  Computer name: TOSHIBA-3B322C7
  Operating system: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.100216 - 1514)
  Language: English (regional setting: English)
  System manufacturer: TOSHIBA
  System model: Satellite L300D
  BIOS: InsydeH2O Version 1.90
  Processor: AMD Athlon (TM) 64 X 2 Dual - Core TK-57 processor, MMX, 3DNow (2 CPUs), ~1.9GHz
  Memory: 1918MB RAM
  Page file: 256 MB used, 3554 MB of available space
  Windows Dir: C:\WINDOWS
  DirectX version: DirectX 9 .0c (4.09.0000.0904)
  DX setup parameters: not found
  DxDiag Version: 5.03.2600.5512 32 bit Unicode

  ------------
  DxDiag Notes
  ------------
  The DirectX files tab: no problems found.
  Display 1 tab: The system uses the generic video driver. Please install video driver provided by the hardware manufacturer. Features of Direct3D is not available. You should check that the driver is a final version from the hardware manufacturer.
  Sound tab 1: No problems found.
  Music tab: no problems found.
  Input tab: no problems found.
  The network tab: no problems found.

  --------------------
  DirectX Debug levels
  --------------------
  Direct3D: 0/4 (n/a)
  DirectDraw: 0/4 (detail)
  DirectInput: 0/5 (n/a)
  DirectMusic: 0/5 (n/a)
  DirectPlay: 0/9 (detail)
  DirectSound: 0/5 (retail)
  DirectShow: 0/6 (detail)

  ---------------
  Display devices
  ---------------
  Name of the map:
  Manufacturer:
  Chip type:
  DAC type:
  Device key: Enum\
  Memory display: n/a
  Current mode: 1024 x 768 (32 bit) (1 Hz)
  Monitor:
  Monitor Max RES:
  Driver name: vga.dll
  Driver version: 5.01.2600.0000 (English)
  DDI version: unknown
  Driver attributes: Final retail
  Format/driver Date: 04/08/2004 08:00, 9344 bytes
  Would be WHQL logo: Yes
  WHQL Date stamp: n/a
  VDD: n/a
  Mini VDD: vga.sys
  Mini VDD Date: 2008-04-13 14:44:40, 20 992 bytes
  The instrument identifier: {D7B70EE0-4340-11CF-B063-282AAEC2C835}
  Vendor ID: 0x0000
  Device ID: 0x0000
  SubSys ID: 0x00000000
  Revision ID: 0x0000
  Revision ID: 0x0000
  Video Accel:
  Deinterlace caps: n/a
  Registry: OK
  DDraw status: not available
  D3D status: Not available
  AGP status: Not available
  DDraw Test result: does not work
  D3D7 Test result: does not work

  Hey girl

  What is your real problem with your laptop satellite?
  Installation of the display may be driver?

• Pavilion 1030sm m6: display device crashes repeatedly

  Hi, my laptop has a display device which include Intel HD 4000 and HD Radeon 7670 M, it breaks down for no apparent reason. It crashes on different actions as go full screen on You Tube, or while I'm streaming video to the TV via the hdmi port, at the start of games (PES, COD...), when copying images on documents, etc. Display can also sometimes work perfectly for several days. When it crashes the blue screen appears on the screen with this technical information:

  STOP: 0 X 00000116 (A800D23F4E0, 0XFFFFF88004564910, 0 X 0000000000000000, 0 X 0000000000000002 0XFFFFF)
  atikmpag.sys FFFFF8804564910 base address to FFFFF 8804550000, DateStamp 4f4f3bda

  I tried to reinstall the operating system and drivers, but it did not help. All my drivers are of this official site of the support of the HP driver:

  http://support.HP.com/us-en/product/HP-Pavilion-M6-1000-entertainment-notebook-PC-series/5259226/mod...

  Hi @Stef42

  I understand that you are having periodic crashes normally with atikmpag.sys in a blue screen message.

  A common cause of this type of problem is the hardware acceleration feature, either from your browser or Adobe.

  The following methods to disable hardware acceleration in different browsers and adobe flash.

  Windows 7: Internet Explorer hardware-accelerated GPU - start-up or stop -sevenforums.com

  How to activate GPU 'Hardware Acceleration' enable or disable in Firefox - sevenforums.com

  How to turn off acceleration hardware in Google Chrome - solveyourtech.com

  To turn off hardware acceleration in Adobe Flash Player:

  How to disable or enable hardware acceleration? -forums.adobe.com

  Give it a try and see if it helps, just use the one that most applies to your situation.

• When I open my pictures folder and display their (in any view-film, thumbnails etc.) photos have a 'white' on the region, and I don't see the whole picture.

  I recently had a new hard drive installed; now when I open my pictures folder and display their (in any view-film, thumbnails etc.) photos have a 'white' on the region, and I don't see the whole picture.

  Hi AnnEdelstein,
   
  To resolve this problem, install the latest version of the video card driver.
  Contact your video hardware manufacturer to find out how to obtain and install the latest version of the video driver for your video device.
   
  To see if applicable driver updates are available, visit the Microsoft Windows Update Web site at the following address:

  http://update.Microsoft.com

   

  More information on:

  How to manage devices in Windows XP

  Keep me updated on the status of the issue.

• T510 HP - do not click on Flash videos, they do load and display if

  Hello

  The device in question is a version of the device T6X43202 t510 HP

  When it is connected to Citrix video flash will load and display correctly, but you can not click on them.  It seems that the mouse downwards is not detected by the flash video.  You can TAB through it and use the keyboard to navigate through the video.

  For the specific Web site, that I need to run I went on the server instead of forwarding to the client.  All other TC models work very well but not the t510.

  It is not a problem with a specific site either, it happens on all flash videos.

  Any ideas?

  I ended up doing back to HP ThinPro 41019 that isn't the question.

  

• Peripheral Audio USB-Mulit-channel has a driver problem and PnP device problem.

  I try to use the blue ice pre - amp for recording. Under channel-Mulit-USB Audio Device, device status, it displays "this device cannot start. (Code 10) "once I start the troubleshooting process it shows that even after reinstalling the driver it still does not work and that there is a problem with the device PnP I already tried to uninstall the driver and restart my laptop to let windows try again but nothing works.  Please help D:! Thank you all very much! :]
  -Kyle

  Hello

  1. is this problem limited with a specific USB device?

  2. it worked before?

  3. using this unit for the first time on this computer?

  4. the other USB devices work properly?

  Method 1: Run the troubleshooter and see if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. You may need to update the chipset drivers and the USB controller

  Follow the given article below for more information.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  In addition, update the driver from the manufacturer's Web site and see if it helps.

  Method 3: Uninstall and reinstall the USB drivers and check if the problem persists

  1 disconnect all USB devices except the USB keyboard and mouse.

  2. click on start and type device manager in the start search box and press ENTER.
  3. Select the Device Manager and a pop-up window will Device Manager.
  4. click the + on controllers USB Bus to develop it.
  5. right click on all controllers USB and USB Root Hub that is listed, and select uninstall.
  6. restart the computer.
  7. plug in the appliance and check if it works.
   
   
   
   
  I hope this helps.

• Error on image from the server and display streaming

  Hi all

  Im trying to read an Image that origin of the server and displays on a screen

  Here's the code I'm using to broadcast the image.

  It is streaming on my Simulator as well as on some devices.

  But on some devices, it's not streaming and throw an exception.

  public UrlToEncodedImage(String url)
  {
  HttpConnection connection = null;
  InputStream inputStream = null;
  byte[] dataArray = null;
  
  try
  {
  connection = (HttpConnection) Connector.open(url+getConnectionString(), Connector.READ, true);
  inputStream = connection.openInputStream();
  byte[] responseData = new byte[10000];
  int length = 0;
  StringBuffer rawResponse = new StringBuffer();
  while (-1 != (length = inputStream.read(responseData)))
  {
  rawResponse.append(new String(responseData, 0, length));
  }
  int responseCode = connection.getResponseCode();
  if (responseCode != HttpConnection.HTTP_OK)
  {
  throw new IOException("HTTP response code: "+ responseCode);
  } 
  
  final String result = rawResponse.toString();
  dataArray = result.getBytes();
  }
  catch (final Exception ex)
  { }
  
  finally
  {
  try
  {
  inputStream.close();
  inputStream = null;
  connection.close();
  connection = null;
  }
  catch(Exception e){}
  } 
  
  bitmap = EncodedImage.createEncodedImage(dataArray, 0,dataArray.length);
  // this will scale your image acc. to your height and width of bitmapfield
  
  int multH;
  int multW;
  int currHeight = bitmap.getHeight();
  int currWidth = bitmap.getWidth();
  if(currHeight>350&&currWidth>350){
      bitmap=scaleToFactor(bitmap,currWidth,currHeight,Display.getWidth()-20,250);
  }
  
  }
  public EncodedImage getEncodedImage()
  {
  return bitmap;
  }
  public  EncodedImage scaleToFactor(EncodedImage encoded, int curWidth, int curHeight, int newWidth,
          int newHeight)
  {
       int numerator_width = Fixed32.toFP(curWidth);
       int denominator_width = Fixed32.toFP(newWidth);
       int scale_width = Fixed32.div(numerator_width, denominator_width);
  
       int numerator_height = Fixed32.toFP(curHeight);
       int denominator_height = Fixed32.toFP(newHeight);
       int scale_height = Fixed32.div(numerator_height, denominator_height);
  
       return encoded.scaleImage32(scale_width, scale_height);
  }
  private static String getConnectionString()
  {
      String connectionString = null;
      if(DeviceInfo.isSimulator())
      {
              if(UrlToEncodedImage.USE_MDS_IN_SIMULATOR)
              {
                     connectionString = ";deviceside=false";
              }
              else
              {
                     connectionString = ";deviceside=true";
              }
      }
      else if(WLANInfo.getWLANState() == WLANInfo.WLAN_STATE_CONNECTED)
      {
         connectionString = ";interface=wifi";
      }
  
      else if((CoverageInfo.getCoverageStatus() & CoverageInfo.COVERAGE_DIRECT) == CoverageInfo.COVERAGE_DIRECT)
      {
          String carrierUid = getCarrierBIBSUid();
          if(carrierUid == null)
          {
           connectionString = ";deviceside=true";
          }
          else
          {
             connectionString = ";deviceside=false;connectionUID="+carrierUid + ";ConnectionType=";
          }
      }                
  
     else if((CoverageInfo.getCoverageStatus() & CoverageInfo.COVERAGE_MDS) == CoverageInfo.COVERAGE_MDS)
      {
        connectionString = ";deviceside=false";
      }
  
     else if(CoverageInfo.getCoverageStatus() == CoverageInfo.COVERAGE_NONE)
      {}
      else
      { connectionString = ";deviceside=true";} 
  
      return connectionString;
  }
  private static String getCarrierBIBSUid()
  {
      ServiceRecord[] records = ServiceBook.getSB().getRecords();
      int currentRecord;
  
      for(currentRecord = 0; currentRecord < records.length; currentRecord++)         {             if(records[currentRecord].getCid().toLowerCase().equals("ippp"))             {                 if(records[currentRecord].getName().toLowerCase().indexOf("bibs") >= 0)
              {
                  return records[currentRecord].getUid();
              }
          }
      }
  
      return null;
  }
  

  The underlined part of the code is where the uid is sent as public _.

  Please, look in the code and let me know where the error is, or is there a better way to disseminate the image.

  In the hope that you hear.

  Thank you & best regards

  Krishnan

  Hello

  I found the error.

  It's in the URL sent by the server.

  The URL consisted of http://google.com

  But the format required to retrieve the image on several device would be http://www.google.com.

  Thanks for anyone who tried to help him.

  Krishnan.