Loops through the date range

Similar Questions

• I want to loop through the data from two different tables using for loop where the query should be replaced at runtime, please help me

  I have the data into two table with the structure of similar column, I want to loop through the data in these two tables

  based on some condition and runtime that I want to put the query in loop for example, the example is given, please help me

  create table ab (a number, b varchar2 (20));

  Insert into ab

  Select rownum, rownum. "" sample "

  of the double

  connect by level < = 10

  create table bc (a number, b varchar2 (20));

  Insert into BC.

  Select rownum + 1, rownum + 1 | "" sample "

  of the double

  connect by level < = 10

  declare

  l_statement varchar2 (2000);

  Boolean bool;

  Start

  bool: = true;

  If it is true, then

  l_statement: =' select * ab ';

  on the other

  l_statement: =' select * from bc';

  end if

  I'm in execute immediate l_statement - something like that, but I don't know

  loop

  dbms_output.put_line (i.a);

  end loop;

  end;

  Something like that, but this isn't a peace of the code work.

  Try this and adapt according to your needs:

  declare

  l_statement varchar2 (2000);

  c SYS_REFCURSOR;

  l_a number;

  l_b varchar2 (20);

  Boolean bool;

  Start

  bool: = true;

  If it is true, then

  l_statement: = "select a, b, AB;

  on the other

  l_statement: = "select a, b from bc;

  end if;

  --

  Open c for l_statement;

  --

  loop

  extract the c in l_a, l_b;

  When the output c % notfound;

  dbms_output.put_line (l_a |') -' || l_b);

  end loop;

  close c;

  end;

  /

• loop through the layers defining the lock and visibility

  I need to loop through the layers in the active document and the value of the properties of the layer is false or true.  I tried to create a loop using a method 'for', but it doesn't seem to work. I have renounced the method 'for' because I kept running into a problem.  I have set all layers with these settings just the odd ones (2,4,6, etc.). Here is sample if it was written.

  myLayer = myDoc.layers var [2];

  myLayer.visible = false;

  myLayer.locked = true;

  myLayer = myDoc.layers var [4];

  myLayer.visible = false;

  myLayer.locked = true;

  myLayer = myDoc.layers var [6];

  myLayer.visible = false;

  myLayer.locked = true;

  myLayer = myDoc.layers var [8];

  myLayer.visible = false;

  myLayer.locked = true;

  I have 208 layers, so doing it this way would be way to long. Any help would be appreciated.

  Illustrator CC 2014 running.

  After I wrote this and tested, I saw that Carlos had already answered, but I thought that I would post it anyway. Carlos KNOWS how much I love JS... ;-)

  One difference is that, since it was not clear to me which layer you talk like layer #1, I started at the bottom of the scale.  I hope this helps.  -TT

  var aDoc = app.activeDocument;
  var lc = aDoc.layers.length;
  for (var i = 2; i <= lc; i+=2) {
      var curLayer = lc - i
      aDoc.layers[curLayer].visible = false;
      aDoc.layers[curLayer].locked = true;
  }
  

• SUM (case use this structure to get average values on the date range

  I use:
  
  Oracle SQL Developer (3.0.04) build hand - 04.34 Oracle Database 11 g Enterprise Edition 11.2.0.1.0 - 64 bit Production
  
  How do we use the function sum with a structure of matter inside.
  
  so I gave that looks like have an ID, date and value. I'm looking to get the day 7 medium for the date range of 04/01/2013 to 20/04/2013
  

  with t as (
  select 1 ID_Key,to_date('4/1/2013','mm-dd-yyyy') date_val, 10 Value_num from dual union all
  select 1 ID_key,to_date('4/2/2013','mm-dd-yyyy'), 15 from dual union all
  select 1 ID_key,to_date('4/3/2013','mm-dd-yyyy'), 20 from dual union all
  select 1 ID_key,to_date('4/5/2013','mm-dd-yyyy'), 0 from dual union all
  select 1 ID_key,to_date('4/8/2013','mm-dd-yyyy'), 12 from dual union all
  select 1 ID_key,to_date('4/9/2013','mm-dd-yyyy'), 8 from dual union all
  select 1 ID_key,to_date('4/10/2013','mm-dd-yyyy'), 6 from dual union all
  select 1 ID_key,to_date('4/12/2013','mm-dd-yyyy'), 10 from dual union all
  select 1 ID_key,to_date('4/13/2013','mm-dd-yyyy'), 0 from dual union all
  select 1 ID_key,to_date('4/14/2013','mm-dd-yyyy'), 0 from dual union all
  select 1 ID_key,to_date('4/15/2013','mm-dd-yyyy'), 10 from dual union all
  select 1 ID_key,to_date('4/16/2013','mm-dd-yyyy'), 5 from dual union all
  select 1 ID_key,to_date('4/17/2013','mm-dd-yyyy'), 2 from dual union all
  select 1 ID_key,to_date('4/20/2013','mm-dd-yyyy'), 3 from dual union all
  select 2 ID_key,to_date('4/3/2013','mm-dd-yyyy'), 12 from dual union all
  select 2 ID_key,to_date('4/5/2013','mm-dd-yyyy'), 15 from dual union all
  select 2 ID_key,to_date('4/6/2013','mm-dd-yyyy'), 5 from dual union all
  select 2 ID_key,to_date('4/7/2013','mm-dd-yyyy'), 7 from dual union all
  select 2 ID_key,to_date('4/9/2013','mm-dd-yyyy'), 10 from dual union all
  select 2 ID_key,to_date('4/11/2013','mm-dd-yyyy'), 5 from dual union all
  select 2 ID_key,to_date('4/12/2013','mm-dd-yyyy'), 0 from dual union all
  select 2 ID_key,to_date('4/13/2013','mm-dd-yyyy'), 0 from dual union all
  select 2 ID_key,to_date('4/15/2013','mm-dd-yyyy'), 6 from dual union all
  select 2 ID_key,to_date('4/16/2013','mm-dd-yyyy'), 8 from dual union all
  select 2 ID_key,to_date('4/17/2013','mm-dd-yyyy'), 0 from dual union all
  select 2 ID_key,to_date('4/18/2013','mm-dd-yyyy'), 10 from dual union all
  select 2 ID_key,to_date('4/19/2013','mm-dd-yyyy'), 5 from dual
  )

  * Please let me know if the table does not load.
  
  I would get the average of 7 days, as long as there is date for the rank of enough previous dates, is it not, then it returns a null value.
  
  the results should look like this

  ID_Key      date_val     Value_num     7Day_Avg     7Day_Avg2
  1     4/1/2013     10          null          null
  1     4/2/2013     15          null          null
  1     4/3/2013     20          null          null
  1     4/5/2013     0          null          null
  1     4/8/2013     12          6.71          11.75
  1     4/9/2013     8          5.71          10.00
  1     4/10/2013     6          3.71          6.50
  1     4/12/2013     10          5.14          9.00
  1     4/13/2013     0          5.14          7.20
  1     4/14/2013     0          5.14          6.00
  1     4/15/2013     10          4.86          5.67
  1     4/16/2013     5          4.42          5.17
  1     4/17/2013     2          3.85          4.50
  1     4/20/2013     3          2.86          4.00
  2     4/3/2013     12          null          null
  2     4/5/2013     15          null          null
  2     4/6/2013     5          null          null
  2     4/7/2013     7          5.57          9.75
  2     4/9/2013     10          7.00          9.80
  2     4/11/2013     5          6.00          8.40
  2     4/12/2013     0          3.86          5.40
  2     4/13/2013     0          3.14          4.40
  2     4/15/2013     6          3.00          4.20
  2     4/16/2013     8          2.71          3.80
  2     4/17/2013     0          2.71          3.17
  2     4/18/2013     10          3.43          4.00
  2     4/19/2013     5          4.14          4.83

  As you can see, there are gaps in the dates, the value is then processed by zeros for the 7Day_Avg and then ignored for the 7Day_Avg2 (not counted in the number of days on average do to no valu_num line)
  I tried something like this at first, but becomes "missing keyword" error

  select
  t.*/,
  sum(
        case 
          when date_val between :day2 - 6 and :day2
          then value_num between date_val - 6 and date_val
          else null
          end
          )
          as 7Day_avg
  
  form t

  Should I have the structure outside the sum function?
  
  Any thoughts?
  
  Published by: 1004407 on June 7, 2013 11:06

  Hello

  If you want to calculate the average of the last 7 days, including the current day, then then RANGE should be 6 PRIOR, not 7.

  Try this:

  WITH got_min_date_val AS

  (

  SELECT id_key, date_val, value_num

  MIN (date_val) compared to (AS min_date_val)

  T

  WHERE the date_val BETWEEN TO_DATE (April 1, 2013 ', "dd-mm-yyyy")

  AND TO_DATE (April 20, 2013 ', "dd-mm-yyyy")

  )

  SELECT id_key, date_val, value_num

  CASE

  WHEN date_val > = min_date_val + 6

  THEN SUM (value_num) OVER (PARTITION BY id_key

  ORDER BY date_val

  PRIOR TO TIER 6

  )

  / 7

  END AS avg_7_day

  CASE

  WHEN date_val > = min_date_val + 6

  THEN AVG (value_num) OVER (PARTITION BY id_key

  ORDER BY date_val

  PRIOR TO TIER 6

  )

  END AS avg_7_day_2

  OF got_min_date_val

  ORDER BY id_key

  date_val

  ;

  Output:

  ID_KEY DATE_VAL VALUE_NUM AVG_7_DAY AVG_7_DAY_2

  ---------- --------- ---------- ---------- ------------

  1 1 APRIL 13 10

  1 2 APRIL 13 15

  1 APRIL 3, 13 20

  1 5 APRIL 13 0

  1 APRIL 8, 13 12 6.71 11.75

  1 APRIL 9, 13 8 5.71 10.00

  1 APRIL 10 13 6 3.71 6.50

  1 12 APRIL 13 10 5.14 9,00

  1 13 APRIL 13 0 5,14 7.20

  1 14 APRIL 13 0 5,14 6.00

  1 15 APRIL 13 10 4.86 5.67

  1 16 APRIL 13 5 4.43 5.17

  1 APRIL 17, 13 2 3.86 4.50

  1 APRIL 20, 13 3 2.86 4.00

  2 APRIL 3, 13 12

  2 5 APRIL 13 15

  2 6 APRIL 13 5

  2 7 APRIL 13 7 5.57 9.75

  2 9 APRIL 13 10 7,00 9.80

  2 11 APRIL 13 5 6.00 8.40

  2 12 APRIL 13 0 3.86 5.40

  2 13 APRIL 13 0 3.14 4.40

  2 15 APRIL 13 6 3.00 4.20

  2 16 APRIL 13 8 2.71 3.80

  2 17 APRIL 13 0 2.71 3.17

  2 18 APRIL 13 10 3.43 4.00

  2 APRIL 19, 13 5 4.14 4,83

  Post edited by: FrankKulash

  Sorry; I wanted to respond to OP, not Greg

• Get number of records in the date range - IDE: PLSQL Developer

  I want to count the number of records of members who register within a date range specified, based on effective and expiration dates and their "elg_code". I posted the SQL code for some examples of data. What I would like to see returned is in three columns of the counties where the eff_date date_exp members fall within the date range specified by the SQL and have an Elg_code of ' ' (space).
  
  So what I would like is all members with elg_code ' ' where he eff_dt and exp_dt range is April 2012, 2012 MAY & JUN 2012. Thus, according to data from the sample I posted, Mark, where his elg_code record is ' ', his eff_dt is 01/01/2011 and April 2012 (30/04/2012) is his exp_dt. Range of the brand statement may 2012, but not MAY or JUNE of 2012. Marty would tally for the APR and MAY because his eff_dt is before MAY 2012 and his exp to MAY 2012. etc...
  
  According to the data below, the results should resemble:
  
  APR MAY JUN
  4-3-2
  
  APR should have FRANK, MARK, MARTY, MARY.
  MAY should have FRANK, MARTY, MARY
  JUN should have FRANK and MARIE
  
  NOAM and JOHN should not appear as his records with elg_code ' ' have no documents eff_dt and exp_dt which are April-June 2012.
  
  So what I tried without success as it appears that I have a kind of Cartesian question (?), is:
  
  Select count (m1.mbr_name) APR,
  Count (m2.mbr_name) MAY,
  Count (m3.mbr_name) JUN
  mbr2 M1,
  mbr2 m2,
  mbr2 m3
  "where m1.eff_dt < ' 01 - may - 2012"
  "and m1.exp_dt > ' 01-Apr-2012.
  and m1.elg_code = ' '
  "and m2.eff_dt < 1 June 2012"
  "and m2.exp_dt > ' 01 - may - 2012"
  and m2.elg_code = ' '
  "and m3.eff_dt < 1 July 2012"
  "and m3.exp_dt > 1 June 2012"
  and m3.elg_code = ' '
  
  
  Here's the DML
  
  Thanks for any help!
  
  
  create table mbr2 (mbr_name varchar (10), varchar (1) grpid eff_dt date, date of exp_dt elg_code varchar (1))
  Commit
  
  insert into mbr2 values ('BRAND', 'A', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (April 30, 2012 ',' DD-MM-YYYY '), ' ')
  insert into mbr2 values ('BRAND', 'A', to_date (May 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY '), 'C')
  
  insert into mbr2 values ('MARTY', 'A', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (May 31, 2012 ',' DD-MM-YYYY '), ' ')
  insert into mbr2 values ('MARTY', 'A', to_date (June 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY '), 'C')
  
  insert into mbr2 values ('FRANK', 'B', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (June 30, 2012 ',' DD-MM-YYYY '), ' ')
  insert into mbr2 values ('FRANK', 'B', to_date (July 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY ""), 'C')
  
  insert into mbr2 values ('MARY', 'B', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (June 30, 2012 ',' DD-MM-YYYY '), ' ')
  insert into mbr2 values ('MARY', 'B', to_date (July 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY ""), 'C')
  
  insert into mbr2 values ('JOHN', 'C', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (July 1, 2011 ',' DD-MM-YYYY '), ' ')
  insert into mbr2 values ('JOHN', 'C', to_date (July 1, 2011 ',' DD-MM-YYYY '), to_date (1 January 2012 ',' DD-MM-YYYY ""), 'C')
  
  insert into mbr2 values ("NOAM" 'd', to_date (July 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY '), ' ' ")
  
  Commit

  This gives you a report for the current month and the two front. Column header must be adjusted ;-)

  select
    count(
    case
    when
      eff_dt < add_months(trunc(sysdate,'MM'), -1)
      and
      exp_dt >= add_months(trunc(sysdate,'MM'), -2)
    then 1
    end) April
  , count(
    case
    when
      eff_dt < add_months(trunc(sysdate,'MM'), 0)
      and
      exp_dt >= add_months(trunc(sysdate,'MM'), -1)
    then 1
    end) May
  , count(
    case
    when
      eff_dt < add_months(trunc(sysdate,'MM'), 1)
      and
      exp_dt >= add_months(trunc(sysdate,'MM'), 0)
    then 1
    end) June
  from mbr2
  where
  elg_code = ' '
  and
  eff_dt < add_months(trunc(sysdate,'MM'), 1)
  and
  exp_dt >= add_months(trunc(sysdate,'MM'), -2)
  
  APRIL     MAY     JUNE
  4     3     2
  

• Loop through the list in flex 4 conclusion d buttons

  Anyone know how to completely recursively loops through the list in flex 4 by pulling the bodies of buttons.  This way I can apply my effects for buttons on the screen at the same time?

  You just create a subclass of button that has the desired effect and use it throughout your application.

  Gordon Smith

  Adobe Flex SDK team

• loop through the list in flex 4

  I want to loop through the list and apply the following code to each button, the checkbox and the descent down in my application

  mouseOver = "animateHover ('theComponentID').

  How is that possible?

  Hello

  This should do what you want, you must add the eventlistener now your animated can be run from the th event handler.

  protected function button1_clickHandler(event:MouseEvent):void

  {

  for (var i: Number = 0; i<>

  {

  var obj:Object = this.getElementAt (i);

  If (flash.utils.getQualifiedClassName (obj) is 'spark.components::Button')

  {

  (obj as Button) .addEventListener (MouseEvent.MOUSE_OVER, onMouseOver);

  }

  If (flash.utils.getQualifiedClassName (obj) is 'spark.components::CheckBox')

  {

  (obj as CheckBox) .addEventListener (MouseEvent.MOUSE_OVER, onMouseOver);

  }

  }

  }

  private void onMouseOver(event:MouseEvent):void

  {

  animateHover (event.currentTarget);

  }

• On the date ranges in search of oracle forms

  I use service number, name, type person and date as search criteria in the custom form ranges.
  When I enter the employee number, press the search button, I get the exact info in the block of result.
  Result block contains
  name of the employee, personid, emp numbed, org, start_date.
  Similarly when I enter the employee number, dept, I get the correct values.
  My question is, when I enter the date range. IAM unable to filter the data.
  When I enter START_DATE between nvl(:BLOCKNAME.) Start_date, 1 January 1901 ') and nvl(:BLOCKNAME.) End_date, 31-DEC-4712') where block clause in the result. I had data for the range of dates also.
  
  If I give condition in where clause results take so long when I search with the name of the employee, number, dept, person type.
  
  If I have a query with the date, the persormance is good.
  
  Think you know everything, how it prevents START_DATE between nvl(:BLOCKNAME.) Start_date, 1 January 1901 ') and nvl(:BLOCKNAME.) End_date, 31-DEC-4712') when look us with the employee's name, number, dept, person type.

  So leave the WHERE clause of your empty block and put something like the following in your search button:

  IF    :BLOCK.START_DATE IS NOT NULL
     OR :BLOCK.END_DATE IS NOT NULL THEN
    SET_BLOCK_PROPERTY('YOURBLOCK', ONETIME_WHERE, 'START_DATE between nvl(:BLOCKNAME.START_DATE,TO_DATE(''01-JAN-1901'', ''DD-MON-YYYY'')) and nvl(:BLOCKNAME.END_DATE,TO_DATE(''31-DEC-4712'', ''DD-MON-YYYY''))');
  END IF;
  

• loops through the sections XML &lt; RecieptDetails &gt; and for each record found...

  My input XML file is...
  I get this XML using file adapter...
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  -< root xmlns:ns2 = "http://www.w3.org/2001/XMLSchema" >
  -< ns2:ReceiptBatch >
  < ns2:FileID > "99999" < / ns2:FileID >
  < ns2:Warehouse > in THE < / ns2:Warehouse >
  'L' < ns2:Revision > < / ns2:Revision >
  < ns2:DocID > A4 < / ns2:DocID >
  -< ns2:Receipt >
  < ns2:DeliveryNo > 123 - OP < / ns2:DeliveryNo >
  < ns2:ProcessDate > 112138 < / ns2:ProcessDate >
  < ns2:ContainerNo > 98765 < / ns2:ContainerNo >
  < ns2:Instructions > TREKAU < / ns2:Instructions >
  < ns2:ReceiptType > 1 < / ns2:ReceiptType >
  < ns2:SuppCustCode > 111 < / ns2:SuppCustCode >
  TREK-Cycle < ns2:SuppCustName > < / ns2:SuppCustName >
  -< ns2:ReceiptDetails >
  < ns2:Line > 1 < / ns2:Line >
  < ns2:ProductCode > 1000 < / ns2:ProductCode >
  < ns2:QuantityAdvised > 1 < / ns2:QuantityAdvised >
  < ns2:QuantityReceived > 1 < / ns2:QuantityReceived >
  < / ns2:ReceiptDetails >
  -< ns2:ReceiptDetails >
  < ns2:Line > 2 < / ns2:Line >
  < ns2:ProductCode > 2000 < / ns2:ProductCode >
  < ns2:QuantityAdvised > 2 < / ns2:QuantityAdvised >
  < ns2:QuantityReceived > 2 < / ns2:QuantityReceived >
  < / ns2:ReceiptDetails >
  -< ns2:ReceiptDetails >
  < ns2:Line > 3 < / ns2:Line >
  < ns2:ProductCode > 2000 < / ns2:ProductCode >
  < ns2:QuantityAdvised > 3 < / ns2:QuantityAdvised >
  < ns2:QuantityReceived > 3 < / ns2:QuantityReceived >
  < / ns2:ReceiptDetails >
  < / ns2:Receipt >
  < / ns2:ReceiptBatch >
  < / root >
  
  There are 2 tables in the database.
  Table 1 = T1743512
  Table 2 = T2743002
  
  table - structure
  
  T1743512-
  
  DOCO KCOO DTCO LNID LNIX LITM NOTICE USR JOBN UPMJ PID'M CKNU UREC
  123 00026 1 1 1000 1 1 123 - OP OP
  124 00026 1 1 1000 1 1 124 - OP OP
  123 00026 2 2 1000 2 2 123 - OP OP
  123 00026 3 3 1000 3 2 123 - OP OP
  
  
  
  Things to do are:--
  
  1. Research Notice T1743512 (table) with the following keys:
  1.T1743512. CKNU = < DeliveryNo > XML
  2.T1743512. LNIX = XML < row >
  II. write a record in the T2743002 table for each < RecieptDetails >. (See map below)
  
  Mapping of the records in the table T2743002 to < ReceiptDetails >
  
  EDU - "SABSSV".
  EDBT - < EDBT > (the same for all records)
  EDTN - < DeliveryNo > (from the section < reception > XML)
  EDLN - < row > (from < ReceiptDetails > section in XML format)
  EDSP - white
  DOCO - white
  DCTO - white
  KCOO - white
  LNID - white
  LITM - < ProductCode > < ReceiptDetails > section
  UORG - < QuantityAdvised > < ReceiptDetails > section
  UREC - < QuantityReceived > < ReceiptDetails > section
  USER - "SABSSV".
  JOBN - "SOA - 3PL".
  PID - 'PO-ENTRANTS ".
  UPMJ - current Date Julian
  - Hour current HHMMSS
  
  
  
  Please suggest the solution.
  
  Published by: Prashant_AP on June 22, 2012 12:24 AM

  Hello

  Solution by using a loop in BPEL;
  1 count the number of nodes for ReceiptDetails.
  2 create a counter for loop through each node ReceiptDetails. Use a while loop in BPEL
  3 search T1743512 (table) with DeliveryNo and the line. Make sure that you select the correct line from the ReceiptDetails node element node. This can be done using the counter example of xpatch ns2:ReceiptBatch / ns2:Receipt / ns2:ReceiptDetails [counter] / ns2:Line. Please use the DB adapter.
  I guess that the DeliveryNo can only appear once in the document following your example.
  4. for each receiptDetails you write a record in table too T2743002. Please use the DB adapter.
  5. Since the time increment the counter. This is to ensure that the while loop stops at the point where the counter is greater then the number of nodes to ReceiptDetails.

  I think a better solution is to make the loop in PL/SQL. It will be faster. You specify an input of type of collection in your pl/sql package parameter. Assign all items receiptDetails and DeliverNo line to the PL/SQL package. Within PL/SQL unravel you the closure. With a little luck, you have the T2743002 in the same schema to create the record too. Otherwise create synonyms of the database or database links.

  Good luck

  Thank you

  Sander

• In a table - looping through the rows and the stored procedure call

  APEX version: 3.2.0.00.27
  
  Hello
  
  I searched the forum and tried a few things but could not make it work.
  
  I have a tabular presentation, developed with the help of the ATD (Cascading LOV - method of tabular presentation - AJAX - ATD )
  
  What I'm trying to do now:
  -After submit and validations, loop through all the lines and
  -call a stored procedure passing 3 parameters obtained from each of the lines on the form of tables. This procedure will be an update of a database table.
  
  On the forum, I found that I could do the loop "* FOR i IN 1..." APEX_APPLICATION.g_f03. "LOOP COUNT *" syntax.
  
  Only for testing purposes, I tried just to view information with the following (On Load - after a footer) process (example of Denes Kubicek == > http://deneskubicek.blogspot.com/2009/05/execute-javascript-throuhg-plsql.html):
  

  declare
    v_today  varchar2 (200);
  begin
  --  :P40_test := APEX_APPLICATION.g_f03(1);
  --  :P40_test2 := APEX_APPLICATION.g_f04.COUNT;
    :P40_test2 := 100;
  
    v_today := to_char (sysdate, 'dd.mm.yyyy');
  
  --FOR i IN 1.. APEX_APPLICATION.g_f03.COUNT LOOP 
  
    :P40_test := APEX_APPLICATION.g_f02(2);
  
    HTP.p ('<script type="text/javascript">');
    HTP.p (   'alert(''Today is '
            || v_today
  --          || APEX_APPLICATION.g_f04(APEX_APPLICATION.g_f03(i))
            || '.\n'
            || 'end!'');'
           );
    HTP.p ('</script>');
  
  --    :P40_test := APEX_APPLICATION.g_f02(APEX_APPLICATION.g_f02(i));
  
  --END LOOP;
  
  end;

  The foregoing would give me a ' * ORA-01403: no data found * ' message. I tried through various variants of APEX_APPLICATION.g_f0* #*, but still can't get anything to display correctly. In commenting on all the lines referring to APEX_APPLICATION.g_f0x above, the date would be are they displayed fine.
  
  I tried uncomment the FOR... LOOP and play with the code (defining the process runs "On submit - after calculations" and Validations), I got was a ' * ORA-06502: PL/SQL: digital error or value: character conversion number error * "message.
  
  Here is the script of the form in a table:

  select 
  "V"."MSLINK",                                       -- hidden (number)
  "V"."INSTALLATION_DATE",                        -- editable date picker
  "V"."MANUFACTURER_INDICATOR",              -- editable (cascading LOV -- text)
  "V"."MODEL_INDICATOR",                           -- editable (cascading LOV -- text)
  "V"."DIAMETER_INDICATOR",                      -- editable (LOV -- number)
  "V"."PURPOSE_INDICATOR",                        -- editable (LOV -- text)
  "V"."VALVE_NUMBER",                                -- shown but not editable -- number
  "V"."MODIFY_DATE",                                  -- shown but not editable
  "V"."MODIFY_USER",                                   -- shown but not editable
  "V"."VALVES_STYLE"."FEATURE"                  -- shown but not editable -- number
  from "#OWNER#"."VALVES" "V"
  Where
    "V"."PROJECT_ID" = :P1_PROJECT_NUMBER AND
    "V"."VALVES_DFLAG" = 0

  Regarding the parameters for the stored procedure, it would the MSLINK, VALVE_NUMBER and the VALVES_STYLE. FEATURE.
  
  Help, please!
  (Sorry for the long post).
  
  Thank you
  
  Tan

  Hi, Tan,

  I have not seen that type of object - I've only used custom types for purposes of test years ago and have never used their within Apex!

  One possibility is that the value of checksum being is based on all of the content of these fields, rather than only the part of the FEATURE. If there are other parts of the object, you could include those items as well.

  Otherwise, as you f01 KP for a record, you will need to retrieve the values of the FUNCTION in your PL/SQL code directly from the table (because the user cannot modify these fields, you can be sure that the values in the table will be still valid).

  Andy

• To loop through the structure of table - using xpath

  Hello
  
  My logic to BPEL process is as follows:
  a. extract the data in the variable - receiveMessageInputVariable
  The variable 'receiveMessageInputVariable' has in turn of the data in the table structure. (a set of elements)
  b. to transform the data to the target structure
  c. call the target of the link partner to store data in variable 'ServiceInputVariable '.
  The variable "ServiceInputVariable" structure is similar to "receiveMessageInputVariable".
  
  In the BPEL process "in the process of" level - I have catch-all exception handler - which must send the list of "elements" that failed in a BPEL proceeding.
  
  i. If my body of the email has the following code as below:
  < % bpws:getVariableData('receiveMessageInputVariable','XXINV_ITEM_PAY_ROW_TYPE','/ns4:XXINV_ITEM_PAY_ROW_TYPE/ITEMLINE/ITEMLINE_ITEM/ITEM_NUMBER') % >
  
  It recovers only the first record in the table item_number structure successfully. But don't get the other records in the table.
  
  II. Similarly, I want to print all the elements (such as received) to be available in the body of the email in the following model:
  
  < % ' Save a "% >
  < % bpws:getVariableData('receiveMessageInputVariable','XXINV_ITEM_PAY_ROW_TYPE','/ns4:XXINV_ITEM_PAY_ROW_TYPE/ITEMLINE/ITEMLINE_ITEM[1]/ITEM_NUMBER') % >
  < % ' < br / > "% >".
  < % 'Save two -' % >
  < % bpws:getVariableData('receiveMessageInputVariable','XXINV_ITEM_PAY_ROW_TYPE','/ns4:XXINV_ITEM_PAY_ROW_TYPE/ITEMLINE/ITEMLINE_ITEM[2]/ITEM_NUMBER') % >
  ....
  ..
  < % "Nth record" - % >
  < % bpws:getVariableData('receiveMessageInputVariable','XXINV_ITEM_PAY_ROW_TYPE','/ns4:XXINV_ITEM_PAY_ROW_TYPE/ITEMLINE/ITEMLINE_ITEM[N]/ITEM_NUMBER') % >
  
  Please suggest a syntax suitable in my body of the email - which can loop through all the itemline_item table and print all item_numbers.
  (pseudocode below)
  
  because me in 1... ORA: countNodes (bpws:getVariableData('receiveMessageInputVariable','XXINV_ITEM_PAY_ROW_TYPE','/ns4:XXINV_ITEM_PAY_ROW_TYPE/ITEMLINE/ITEMLINE_ITEM/ITEM_NUMBER'))
  loop
  < % ' article number-"% > < % bpws:getVariableData('i') % >".
  < % APO: getVariableData ('receiveMessageInputVariable', 'XXINV_ITEM_PAY_ROW_TYPE','/ ns4:XXINV_ITEM_PAY_ROW_TYPE/ITEMLINE/ITEMLINE_ITEM/ITEM_NUMBER')% >)
  end loop;
  
  
  Thank you
  Shakur

  Hi Shema

  Try the following approach. It can work for you

  1. create an XSD for HTML content
  
  
  
  
  
  
  
  
  

  2. create a XSL, can be that you must do manually, as JDev will not support transformations to HTML. This XSL will map your input XML to HTML file.
  3. create a variable in BPEL type in the XSD above
  4. use assign activity to assign the XSL transformation to the variable set to step #3
  
  
  5 copy the variable in the variable of email body
  
  
  
  Query = "" / EmailPayload/ns8: Content / ns8:ContentBody "/ >"
  

  Basically, the approach described above converts your entry to a value of string whose content is a complete HTML, and you'll use only one value to be assigned to the body of the email.

  Note: Please change the names of Variable/XPATH Expressions / / the name element from the XSL names etc. According to your BPEL file

  Hope this helps you

  Concerning
  LOC.

• Conditional formatting depends on the date ranges

  Basically, I want to be able to enter a date in column A and a sum of money in the B column, depending on where the date in column A grave in a date range, I want the money in column B to copy to a corresponding column. Is this possible? The only questions I found on here deal in a conditional formatting with dates have to do with derivative.

  Thank you

  Julio

  I hope this help to clarify for you...

  It is not bringing conditional formatting.  Formatting conditional would change the format of a cell (or cells)... as the font, color, size, color cell background, or other formatting character is tics of a cell based on the contents of the cell

  You ask about including of the value of a cel another beach under certain conditions

  Here is an example:

  

  The first three rows are header lines.

  You must enter a valid date for the towing job.  Using the format "mm/dd/yyyy".

  C4 = IF (AND (DATEVALUE (A4) ≥DATEVALUE($B$1), DATEVALUE (A4) ≤DATEVALUE($B$2)), B4, "")

  It's shorthand dethrone select cell C4, and type (or copy and paste it here) the formula:

  = IF (AND (DATEVALUE (A4) ≥DATEVALUE($B$1), DATEVALUE (A4) ≤DATEVALUE($B$2)), B4, "")

  Select the cell C4, copy

  Select cells C4 at the end of the C column, paste

• The smart Albums based on the date range cause app Crash Photos

  While I'm setting up a new Smart Album based on day of photos between 12/01/2015 and 31/12/2015 the Photos app closes with a crash. Cannot set the second date (the end date for this album). However, I can easily create a new Smart Album for next month (01/01/2016 and 01/31/2016). I create smart Albums, because the new Photos app does not like the old iPhoto does with my Photos from the photo gallery.

  How can I solve this? I don't have an album of December...? !

  You are in an area where the date format is different from the United States?  Earlier this year, we have seen small business issues have reported that rules for smart albums date range do not work with the primary language set to French or German.

  Try to change the primary system language to English with an English date format. Photos could be trying to read the 12/31/2015 as the 12th day of the month 31.

  Or use a different date based on 'before' rule and after.

  

• a loop in the data files in a folder

  Hello

  I need to watch several data files. How can I browse all files in a directory in order to get the data from these files?

  Thank you very much

  An autoindexed FOR the loop would be the way to go.  As we said already, use the folder list feature to get a list of files in the folder.

• AMOUNT of Oracle with the date range

  Hello community,

  I'm having a problem with the addition of a field with a date range. It comes to my table

  	JVREF	VARCHAR2	10	-	-	-	-	-	-
  	SOURCE	VARCHAR2	2	-	-	-	-	-	-
  	PERIOD	VARCHAR2	6	-	-	-	-	-	-
  	JVDATE	NUMBER	-	38	0	-	Nullable	-	-
  	GLCODE	VARCHAR2	24	-	-	-	-	-	-
  	DESCR	VARCHAR2	40	-	-	-	Nullable	-	-
  	AMOUNT_0	FLOAT	48	48	-	-	Nullable	-	-
  	AMOUNT_1	FLOAT	48	48	-	-	Nullable	-	-
  	JVTYPE	VARCHAR2	4

  and I'm glad the the following statement works as expected

  SELECT AMOUNT_1 FROM 'TABLE' where

  TO_DATE ("PERIOD, ' YYYYMM") > = to_date ("'201501 ',' YYYYMM")

  and

  TO_DATE (PERIOD, 'YYYYMM') < = to_date ("'201502 ',' YYYYMM");

  E.g.

  AMOUNT_1

  56192.48

  59863.57

  48570.1

  72407.12

  21626.96

  35532.96

  75860.67

  25623.62

  54799.83

  16872.3

  The next thing I want to do is the sum of these amounts... so I changed my statement to become

  SELECT SUM (AMOUNT_1) 'TABLE' where

  TO_DATE ("PERIOD, ' YYYYMM") > = to_date ("'201501 ',' YYYYMM")

  and

  TO_DATE (PERIOD, 'YYYYMM') < = to_date ("'201502 ',' YYYYMM");

  and now I'm getting

  ORA-01841: (full) year must be between-4713 and 9999 and not 0

  I also tried

  SELECT THE PERIOD (AMOUNT_1) SUM OF "BRE". "' OPW_NMLTRX ' where

  TO_DATE ("PERIOD, ' YYYYMM") > = to_date ("'201501 ',' YYYYMM")

  and

  TO_DATE (PERIOD, 'YYYYMM') < = to_date ("'201502 ',' YYYYMM")

  Group by PERIOD

  with the same results... I can't figure out what I should do next?

  Thank you.

  Hello

  Solomon Yakobson says:

  Question:

  SELECT *.

  From your_table

  WHERE the TO_NUMBER (SUBSTR (PERIOD, 1, 4)) NO BETWEEN-4713 and 9999

  OR TO_NUMBER (SUBSTR (PERIOD, 1, 4)) = 0

  /

  To find the offending rows.

  SY.

  This can cause other errors, according to what is in this column.  A better way would be something like:

  Primary_key SELECT, period - add more columns you want

  'TABLE' - avoid names which need quotation marks

  (Period WHERE the TRANSLATION)

  '012345678'

  '999999999'

  ) <> = "999999"

  OR SUBSTR (period, 1, 4), not BETWEEN "1900" AND "2099"

  OR SUBSTR (period 5) NOT BETWEEN '01' to '12'

  ;

  Now there may be errors of conversion, because there is no conversion.