Lose sound and resolution

Similar Questions

• Have a HD Sony Wega KDF E60A20 TV that loses sound and image for a bout a minute then comes o

  Have a HD Sony Wega KDF E60A20 TV that loses the sound and picture for a bout a minute then light up again.

  I'm sorry to hear what is happening with your TV. I need more information about the problem you are having with the unit. When the TV loses sound and the image is there any light that flashes on the control panel of your TV (e.g. lamp, timer or power)? What is the video source connected to the TV?

  Follow the steps below to troubleshoot the TV.

  A power reset.

  1 turn off the TV.
  2. unplug the power cord of the TV from the power outlet.
  3. let the TV remain without power for 60 seconds.
  4 plug the power cord into the power outlet.
  5. turn on the TV.

  If the problem persists, try to pull up the TV menu when the sound and the image is lost, just press the Wega door button on the supplied remote control. See the menu? Note If there is no light, which will blink on the Panel of the TV when the problem occurs.

  If my post answered your question, please mark it as an "accepted Solution".

• Difference between signal y express sound and Vibration Assistant

  Buenas,

  Cuando instalas el of sound and vibration luego software, tienes back ejecutables: Sound and vibration assistant y signal on purpose. Los abres los back if you lo lo mismo. Mid questions are:

  • What difference between hay?
  
  
  • Da igual use uno u otro
  
  
  • If desinstalo uno los pasa algo back?

  MUCHAS gracias

  Saludos

  Hola, aaramburu,

  in lenguaje andar por casa, Signal Express are el programa matriz y S & VA el are UN modulo what instala encima y reviews una paleta Programación than permite usar funcionalidades specific sonido Análisis y constant. El Signal Express has leaves, apply filters, a configurable software para datos closing, etc. If el S & VA mallards are mallards nuevas funcionalidades enable use tarjetas para señales dinamicas o DSAS that enable leer of tacometros, acelerometros, hacer análisis octavas, etc.. ES como if instalas LabVIEW, are UN lenguaje general Programación y quieres una camara use. Sober el propio LabVIEW has instalar Modulo de Vision para el LabVIEW y is anaden kbes imagen aforementioned funcionalidades.

  No nada desinstales, one extended capabilities. As has using uno u otro, depends on the nature of the application as desarrolles. If going to a Signal Express y seleccionas help > Getting Started with > Getting Started with LabVIEW Signal Express Fiesta el tutorial Básico para el manejo del entorno con guiados exercise. Leads unas cuatro horas. If you want to develop una application of sonido y vibration, using a high port tal y como is muestra in el tutorial help > Getting Started with > Assistant Sound and Vibration.

  I hope this information you follows from utility.

  Jesus.

• Not plugged into the HDMI cable between the PC and the TV for watching movies, but it has no sound and the image.

  Original title: high speed HDMI does not.

  I plugin the HDMI cable between the PC and the TV for watching movies, but it has no sound and the image.

  Hi lisa,

  Try these steps and check the result.
  Step 1: Manage audio devices
  a. Click Start and then click Control Panel.
  b. click hardware and sound.
  c. under sound, click on manage audio devices.
  d. click on the playback device you want to output sound. Right-click in the empty space and click on see the disabled devices to see other devices.
  e. Select the device and click on set as default and then click OK.

  See http://support.Microsoft.com/kb/953500

  Step 2: Graphics output to monitor
  a. right click on the desktop, click chart options.
  b. output to monitor.

  Step 3: Adjust graphics hardware acceleration
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click Advanced settings, click the Troubleshooting tab and then click on change settings.
  Note: Some video card drivers do not allow allows you to change the settings.
  c. move the hardware acceleration slider at different levels and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows7 Pro - HP Probook 4540 s - No sound and the research of error cannot find the problem

  A few days ago my sound suddenly disappeared. He worked for years.

  I managed to recover, using the search to error, it was something off.

  After restarting my computer the next day, the noise was gone, again, and this time, I've not found errors using the error search features in Windows.

  Volume is up, but not sound.

  Douglas

  Yhank you Niranjan Manjhi

  • Are you referring to the resolution of the problems when you say, "error search skills?

  Answer is Yes

  I think that your method 1 is the first step, I'd take, now when you have shown the way.

  But before I got this solutio.n you, I tried to call the HP Support and got a person very helpsam, and together, we started a tour.

  Whenever I tried to game the system a system - its, it was rejected, to do that the sound material was busy serving a different task.

  Because I didn't have any other thing going, we went into the SYSTEM and looked at what was experiencing SOUND and found one entry, belonging to a program I installed years ago to convert videos.

  So I uninstalled this driver - and bingo - I got my sound.

  So this is the reason why I have not tried your solutions.

  Thanks for the effort, I'll save it for next time.

  Douglas

• Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?

  If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.

  Best regards

  Q

  Hello

  It may help to place your watch in mode do not disturb before driving:

  -On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.

  You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.

  -On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.

  To send comments and/or service requests to Apple, you can submit the form here (all comments are read):

  https://www.Apple.com/feedback/watch.html

  (This is a supportive community focused on user - you don't talk to Apple here).

• Video plays sound and no image in firefox

  When I try to watch a video in a blog page, I get only sound and no picture. I can watch the same video very well with Google Chrome

  I solved the problem by downloading and Installing Real Player. I don't know why, but the videos now play in Firefox. Thank you for your support and your response.

• If I have if I reset my phone will be I lose contacts and text messages

  If I reset my phone I'll lose contacts and text messages

  If you mean if you hold the Home and Power buttons simultaneously and keep them pressed until the Apple appears, then unless there is a problem, you lose all the data. However, it is always a good idea to have a backup in case things go wrong.

  Good luck

  GB

• Why my computer loses its cursor and/or loses its and must use the mouse to go back?

  I will be typing along and all of a sudden, nothing shows up on the screen and must use the mouse to get back.

  Also will be done solitare or another game and lose her and the mouse to move the things. Is this a virus?

  I updated my windows and nothing showed as a problem here.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Satellite A500 - crackling sounds and blue screen

  Hey everybody.

  I bought a laptop Toshiba Satellite A500-19w about 4 days ago (today it is Sunday, March 7, 2010).

  I had the sounds of crackling of my speakers which have been mentioned so many times in the forums, no real solution.
  I also experienced the crash of the blue screen, that's already happened 7 times while I was not strongly using my newly buy laptop.
  I'm not looking for a repair or a replacement, because I find it quite unacceptable to have to think about the errors, faults & fixes as much as the laptop is brand new.

  What I want is a refund, but I'm not sure on how to do it.

  I know that Toshiba has some sort of refund policy, but if someone can tell me exactly how it works, because I want to get rid of my laptop as soon as possible (I will not buy any more portable Toshiba, especially since I had some similar problems with my Qosmio f30).
  If someone can give me some guidance, because I don't want to be mocked or used and cheated out of refund.
  I bought my Toshiba in the Middle East (perhaps refund policies are different here).
  Thank you.

  Post edited by: mihran

  Hi mihran.

  If you want to pay off your laptop, you should talk with your computer store where you bought it. Only the can repay your laptop and not Toshiba directly.
  Of course it is also depending on the country where you life, but normally you can pay within 14 days I think. So in your case I speak with the seller or give them a call. They explain how to do this.

  But let me give you a little advice: regarding your problems with the crackling sound and blue screen I recommend that you contact an authorized service provider or ask a new A500 (this should be possible if you have only 4 days). Generally, I can say that a friend of mine has Satellite A500 and he is quite satisfied with her. This laptop has a great design equipped with new material for a good price. :)

• Sound and other issues with Qosmio x 300-11

  Hello

  I purchased a Qosmio x 300-11s there are a little over 2 months. I have usually more than 1 audio application on at a time, for example radio game world of warcraft, but since today if I try to run more than 1 sound application or a program like world of warcraft which runs to several sound channels at once I get nothing. The sound stops completely right, I can also hear the fan hitting the basis if I up the laptop a little on the side. In games and other things, that he also got a little slow, Warcraft as much as the drop in 50-15 FPS, but which could also be a problem in game. Did I do the fix try the sound and the fps of the laptop or is it an internal problem maybe

  The game slows down could be related to the problem I have with temperatures on my 300 x 11 s. You can download a temperature monitoring tool like HWmonitor [http://www.cpuid.com/hwmonitor.php] and [http://www.ozone3d.net/benchmarks/fur/] Furmark to measure the temperature of the gpu, then all running stability test mode non-plein screen and post back with the gpu reported max temperature.

  Mine will reach close to 100 c while performing this test and I bought it 3 weeks ago. I hate the idea of what it will be like when a little dust deposits on the fan

• Satellite C660-2RC: need Win XP drivers for sound and graphics

  Hello Toshiba,

  How are you?
  I need Xp for the use of old softwarer for medical activity. (not compatible with Vista or Win7)

  I install Xp Home Sp2 but sound and vga drivers is the problem.

  Psc0QE-06p02UBY
  ZB2534...
  Satellite C660-2RC

  Thanks for you support!

  > Toshiba Hello, how are you?

  LOL :), it seems to be a forum for a user to buddy don t think you meet someone from Toshiba here.

  > I need Xp for the use of old softwarer for medical activity. (not compatible with Vista or Win7)
  Didn t you know that you can install the incompatible software in compatibility mode for Win XP?

  Here's a nice Microsoft documentation:
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  PS: You must first install for Win XP SP3 before installing the audio driver.
  The display driver is Intel. So there were also on the page of Intel graphics driver.
  But Toshiba driver European page contains two drivers too.

• Tecra A2 - lost sound and ConfigFree, what should I do?

  1. the device does not work, the "Sounds and Audio Devices Properties" indicates "No. Audio Device. Attempted relocation Sigmatel Audio and RealTek HD audio, but without success, what I try next?

  Also, CofigFree does not work despite having tried a reinstall, at startup, an error message appears saying "not found TOSHIBA Network Device Usermode i/o Protocol. Please reinstall ConfigFree'... How can I fix it?

  Thank you very much!

  I m wondering what you did cela sound and Configfree don t work anymore?  :|
  Regarding the sound issue:
  First, you must remove the software from Realtek sound system manager.
  Control Panel-> software

  Then go to Device Manager and remove the sound card in the list of devices (simply mark it and press DELETE).
  After that restart the laptop, wait for windows would ask the audio driver and then point to the driver files that you downloaded from the Toshiba driver page.

  Regarding the ConfigFree:
  Usually the Configfree should work. If there is something wrong then you should uninstall the Configfree first.
  Then you must restart the computer laptop and recommended to clean the registry using the CCleaner (it s free do google)
  After this attempt to install this new.

• Tecra 9100: No sound and unknown device

  I have the laptop above and have recently flattened and reinstalled Windows XP pro. I have no sound, I have a speaker in my sys tray, Device Manager detects the card Intel (r) 82801 CA/Cam AC'97 Audio Controller, after I installed the RealTek AC 97 drivers. I plugged in the headphones to make sure that this is not not the speakers who have blown. But still no sound. All volumes are turned upward and the volume on the front wheel is set in the middle. In sounds and audio in the Control Panel, all volumes are increasing and the speakers are set to portable stereo speakers.

  Any ideas?

  I have a unknown devices in Device Manager States location is a system compatible ACPI Microsoft from what I see on Google it's something to do with the battery. Once again any ideas?

  Thank you

  I know that your laptop. It s a Tecra 9100 and this laptop supports a Yamaha YMF753 - stereo 16-bit Sound Blaster Pro compatible sound card.

  The problem is the XP SP1 or SP2. The audio driver of Yamaha does not support SP1.
  Seems that you need to update the audio driver.

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24622

  and

  This Toshiba solution site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000001b59

• Qosmio G20 - Sound and Bluetooth driver installation

  Hi friends...

  In fact, I had a problem with my DVD/CD ROM
  So, I got my pc with the restore CD.
  When I restart my system it shows new multimedia hardware VGA controller and USB device found where I m not able the install.
  I'm not sure what these devices are only.

  I put t know which driver must be installed for these devices and I don t see volume control in the bar of tasks.
  When I check the sounds and audio settings it shows no audio device found.
  When I try my wireless via Bluetooth file transfer he says not ready or Bluetooth is not started.

  So, what could be the problem?
  Can someone can solve my problem

  Thanks in advance...

  Raja

  Make the path on your earned, others may follow you... Raja

  Hello Raja

  Your ad is quite confusing, and it is not possible to offer a reasonable solution.
  The fact is that this recovery image contains all the necessary drivers for all hardware components of your notebook. Because of this I do not understand what exactly happens after the first start.

  So, if something like this happens, I can imagine some external devices are connected.
  Do you use a recovery media for the first time? Have you noticed similar problems in the past?
  Have you bought this laptop like new or used one?

  Sorry for all these questions, but, as I wrote previously, the whole story is a bit confusing.