Satellite Pro P300-19 q - cannot start with a new memory

Similar Questions

• Satellite Pro P300-145 - sound of frying with my headphones

  Hello!

  I have a Satellite Pro P300-145 and today I started noticing a noise of frying with my headphones. I tested my headphones in a different laptop and they sound good and if I play the same files with my speakers it sounds good too so I was wondering if you knew what could be the reason.

  I have to say I kept the laptop doesn't work for quite a lot this weekend and he got more than warm so I dunno if that could be causing it in the first place.

  Thanks in advance for your help.

  Hi Andunemir,

  What operating system you are using? You use Windows or Linux?
  In addition, it would be interesting to know if this happens only with headphones/external speakers or portable speakers internal too. You can test this please?

  > I have to say I kept the laptop doesn't work for quite a lot this weekend and he got more than warm so I dunno if that could be causing it in the first place.
  The temperature of the laptop is enough depending on the applications that you are running. High CPU and graphic card use causes a higher temperature.

  But it s also advised to clean the system at any time using a jet of compressed air. This can blow the dust from the cooling fans and the laptop is much cooler after that. I do it every 3 months because I use my laptop every day. If I do that, I followed these instructions:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/forum.jspa?forumID=105]

• Satellite Pro R50-B-12U - cannot start some application

  I have a new laptop Satellite Pro R50-B-12U. When I put in place, I gave my name and my password when you are prompted.
  I installed HMRC PAYETOOLS-RTI, but cannot enter it as a box arrives with 'You may need to check if you are allowed access to the following location on this computer' assistance please contact the manufacturer of your computer or your COMPUTER person support.

  I don't understand why I get that I have not set up a separate administrator and user.
  There is only me. I can use the program without any problem on my old laptop.

  Please help a user computer very not warned!

  This application is not known to me, but I think you should check the application developer / support manufacturer page how to install this software...

  It seems that there is a location on the HARD disk that is not available for a common user...

  But generally, you can start each application with the admin rights.

  Right click on the exe file and in the Security tab, you will see that access to the right for all users of accounts available on your laptop.

• Satellite Pro A60: Windows XP cannot start isapnp.sys driver missing or corrupt

  I had a Satellite Pro A60 for about 3 years without problems.

  Last week Toshiba touchscreen developed vertical lines of the bleeding and I got error message "Windows XP cannot start because of the missing or damaged driver isapnp.sys. I tried using the recovery disk, but it loads OK, but it fails to make a difference. Hard drive seems to work OK as slave to another computer.

  No matter what wil suggestions appreciated!

  Thank you

  Found this Microsoft Knowledge base article:
  You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup

  http://support.Microsoft.com/kb/315311/en-us/

  Can it help

• Satellite L450D - 13P cannot start with the new HARD drive

  Hello

  IME novice steve and real computers.
  Two years ago I have toshiba purchest mine 2 is the toshiba satellite L450D - 13p runing windows7! And my partners is the toshiba satellite pro 7 also runing windows!

  The problem is that my hard drive is scrap, so I purchest a new 500 gb HDD, instaled it put in the disk I got with him and nothing?
  Hope any 1 here can help me

  Thanks a lot steve!

  In general you can swap the HARD drive or update it with more a (ability), but the installation of recovery should work. It is important to use compatible HARD drive for certain system.
  I did several times in the past. No problem at all.

  After HDD change the value of the BIOS default settings and start recovery installation using created the recovery disc.

  Start your laptop and when you see Toshiba welcome screen pres F12 repeatedly to enter the boot menu.
  When the menu is displayed on the screen, put the recovery DVD in the optical disc drive.
  In the menu choose you CD/DVD and press ENTER.
  Installation of recovery should start.

  Please do so and send feedback.

• Satellite Pro P300-19 q - cannot get the Wlan to work

  Hello

  Ive just bought the PRO P300-19 q and as many other people cannot get wifi to register even less to connect to any network. I will say that I am under XP Pro. I've updated all the drivers and everything is enabled.

  If anyone can help with this problem it would be greatly appreciated. It seems absurd that Toshiba or Intel have not resolved that, as the problem is ongoing since 2005 - announcement earlier I found.

  Thanks for your help, Zato.

  Hello!

  You have successfully updated the WLAN driver on the Toshiba site?
  http://EU.computers.Toshiba-Europe.com

  Try to update the BIOS of your laptop. You will find on the Toshiba site.

  You use the same standard WiFi on your laptop as on the router? Check in the properties.

  Good bye

• Satellite Pro A300 - driver Webcam cannot start under Win 7

  Recently bought a satellite Pro A300 and immediately updated from Vista to Win7 Pro Bus.
  Do not use webcam before upgrade.

  After upgrade, after downloading and installing the Toshiba Chicony webcam software, continually get message "Webcam driver open fail." "Please restart camera or computer.
  Camera appears in Device Manager and says driver is a Microsoft 6.1.7600.16385 driver v dated 06/21/06 (very pre-Win7!).

  Have you tried unistalling/reinstalling software camera assistant with and without first uninstalling the program camera in Device Manager, but the same error message comes back every time. I would appreciate suggestions for a fix.

  Hello

  In your case, I would try to install the latest driver for the webcam of Toshiba. Install this driver and try again. Also, make sure that this latest version of the BIOS is installed for your laptop.

  In addition, it would be interesting to know if the same problem happens on Vista. You should try it with the factory settings. So that you can identify if it s a hardware or software problem.

• Satellite Pro 4600: sometimes applications stop running with the new RAM

  Hi all

  I was wondering if anyone out there can shed some light on my problem. I've recently upgraded for an extra 256 MB on my Satellite Pro 4600. The laptop showed the increase in RAM. Since the installation, for some reason any after running for awhile applications (this varies between 10 minutes to a few hours like laptop start up), applications stop running. I can not open new applications. When I restart, I can run the applications in my laptop as usual again.

  I received my offtek RAM. Manufacturer part number is the same as specified in the manual of my laptop.

  Please someone has an idea?

  Mocha

  Hello

  Please check the number of PA of the 256 MB chip, the number of PA is properly PA3005U - 1 M 12.

  By

• Satellite Pro M30 - menu Windows cannot start

  Hello

  I have a problem where I can't start something on my computer.
  I seem to have two operating systems that come up at startup fistly

  When I turn on the computer it freezes for centuries, then says failed 0203 IDE #2 I think it's because as my hard drive broke and I replaced it then I get two options
  go to the BIOS or boot menu.

  If I boot and I start an another two options either a bad install of windows xp pro, or a bad installation of Windows XP
  no work, I can't get into all the bios settings by using the command mode without fail fast or any of these options and it seems to work when I try boot discs to erase the hard drive or the bios boot disks.

  I'm almost was to buy a new hardrive that this would maybe cheaper to fix, any help? I no im a beginner but I will be back for all solutions,.

  Thanks in advance.

  Hello

  0203 IDE #2 error is displayed because the device connected to the second IDE controller is not recognized by the BIOS.
  This means that there is something wrong with the IDE controller or the connected device.
  In most cases it s a CD/DVD drive which is broken.

  In this case, the replacement is necessary, but you must use the STRANGE fully compatible!
  Not all CD/DVD drives are supported due to different master/slave/c-salt settings.

  Now you say that you are not able to access the BIOS
  Have you tried the right key? Press F2 during switching on laptop.
  This should help.

  But if you are still not able to access the BIOS, then that means that your motherboard is affected
  The motherboard is one of the parts expensive laptop the laptop seems to be a good old classic in my opinion it s not worth to replace.

• Satellite Pro P300-13i / XP SP3 / problem with microphone

  Just bought a P300-13i and a beautiful machine, it's too. It came with a XP Recovery disk for playing for a few minutes then with Vista to check all knitted OK I brought back to XP (you need to be reliable and v quickly...) I'm a "one man band") and everything seemed to go smoothly with one exception v.

  The machine is supplied with a built-in webcam and microphone. Since the downgrading to XP microphone does not at all well (poor sound volume and a lot of apparent interference) - I confirm with Vista, it worked impeccably well.

  Called Tosh who tried to get a boost function to work... but they could not find. Same re - load the driver concerned but still no result. My problem was apparently 'high', but I guess that's fancy talk for "we can not help you" because I have not heard for over a week now...

  I was wondering if there was a spark out there that may be able to help me... also borrowed USB a friend and who has worked well... but obviously bought a machine with a microphone built-in microphone, I don't want to have to lug round, a plug in mic with me as well!

  The machine is heavy enough as it is!

  Look forward to hearing from someone.

  Lindsay

  Wonderful information!
  Thanks for sharing this with us!

• Satellite Pro P300-135/Windows Vista / problem with microphone and Crystal

  Hello

  Can someone help me please? I reinstalled my Vista and my microphone does not work. When I try to plug in my headphones, they are also dead. Nobody knows what kind of drivers can be responsible for this?

  And how you try reinstalling Vista? Using the recovery image (factory settings) or you try to install the clean version of Vista?

  Sorry, but I don't see any sense why you are doing this. Your laptop comes with Vista. Is there a particular reason to achieve?

• Satellite Pro P300 - 1ES: problem of WIFI with WinXP Atheros AR9281 - low ping

  Hello

  small problem:
  I have a ping, router is 2 meters and I have a low or very low signal. Sometimes I lose the signal completely and when I try to reconnect, the system can't even find the access point.

  things I tried:

  -update the bios
  -Update the driver WLAN card
  -deactivated energy saving options

  I hope someone has an idea how to solve this problem... I totally ideas

  LG,
  steppenwoif

  Hi Steppenwolf,
  just had same problem with the same laptop. Tried the same things without success - had to send back for new motherboard and card wan to get that solved the problem.

• Tecra 8200 does not start with the new memory module

  Hi, ive just rode this memory to my willingness to .it tecra 8200 not initialize the message comes up / remove the incompatible memory in B / someone knows why?

  Memory for laptop IBM 256 MB PC100 144 pin SDRAM SODIMM

  IBM FRU L 33, 3070, 256 MB PC100, SDRAM SODIMM, no parity, 3.3 volts, 144 pins, 32 MB x 64

  Thanks for the replies biff

  Hello

  Well, I really put t know why this message occurs. It seems that this module must be compatible with your device. Are you sure that the module has no fault?
  Have you tried to use this memory module in Bank?

  Otherwise I found other compatible memory modules.

  PC100 256 MB (PA3069U - 1 M 25)
  PC100 128 MB (PA3005U)
  PC100 64 MB (PA3004U)

  http://www.frontline.co.UK/product_detail.aspx?pid=MEMKNG5662

  Good bye

• Satellite Pro P300-19 q - DVD player is constantly trying to access a drive

  Hello

  I have a Toshiba Satellite Pro P300-19 q (PSPCDE-009005EN) with Windows XP. I'm having a strange problem where the DVD drive every now and then turns upward (flashing too) as if it attempts to access a disk. There is no disk in the drive.

  Any ideas?

  It is not easy to say why this is happening.
  As I see you are using Windows XP Home edition. Windows XP Home edition is installed as recovery Toshiba plant?
  Has noticed this problem with the factory settings and clean installed OS?

  Right now I can't imagine that it's a hardware problem. This read command comes obviously from somewhere. If some additional software may be responsible for this?

• Satellite Pro P300-1FP: need drivers Windows XP

  HI -.

  just bought a Toshiba Satellite Pro P300-1FP.

  Came with Vista installed. I would like to use XP instead.

  The aircraft crashed the first time I tried to install XP.
  I looked online and found that I needed to change the BIOS settings to work around this (SATA, "AHCI" to "compatibility").

  This and that the installation worked fine, but there are a lot of missing drivers, for example for the sounds, graphics, ethernet, wi - fi, etc..
  This leaves me in a difficult position since I am currently unable to connect to the internet to look for the missing drivers missing drivers.

  Can someone point me in the right direction?

  Thank you very much

  Alan.

  OK buddy, I want to help you

  First of all he must know that your Satellite Pro P300-1FP belongs to the series of PSPC9E
  You can find the Win XP drivers for this series on the European driver Toshiba page.

  Everything has been published. Just download it