lose the wi - fi connection. Help!

Similar Questions

• I don't want to lose the mail before today, help keep some of the old mail.

  It seems that previous post to today has disappeared. I don't want to lose the old messages. How do I keep it?

  http://KB.mozillazine.org/Disappearing_mail

• Lose the internet while connected to the VPN

  I've seen quite a few threads of not being able to connect to internet when connected to the VPN. I tried to follow but have not be able to follow. I connect to the VPN via IE (that is connected by using Check Point). How can I go about it?

  That's the problem of split tunnel. In general, the VPN tunnel can be configured on the client side (as the native client VPN PPTP in Windows for example) or side Server (like OpenVPN for example) to force all traffic through the VPN tunnel or not. If all the traffic is forced through the VPN tunnel, which is what your description, internet access is controlled by the VPN server. It is a safety precaution to isolate the network side server from your local network.

  I would check with your network/VPN to help admins simply because may fall you on a server-side config that may or may not be changed according to their network security protocols.

• Lose the wireless internet connection when it is not active

  Hello
  I have an annoying problem. IM losing my connection wireless internet access after a few minutes is not active... Well not according to the 'doctor' program - it shows no signs of a problem.

  Looking at the 'LAN' icon, I see he's trying to connect when I ask, for example, an update on the current site, but simply not turn on the blue bar.

  The only cure to get online is to update the connection.

  What I'm doing wrong here?

  Thanks in advance... Jens

  Hello Jens

  Please check the option sign-out after x... on your router. The sign-out feature is used to disconnect the router from your ISP automatically when there is no activity for a certain period of time. For example, place a check mark next to this option and enter 5 in the minute field will cause the router to disconnect from the Internet after 5 minutes of no activity from the Internet. This option should be used if you pay for your Internet service by the minute.

  Good bye

• Move Clips - and how not to lose the audio? Need help!

  Hello

  I used Premiere Pro 6.0 widely enough over the years and have recently moved to first Pro CS5.

  With Premiere Pro 6.0 I could move/drag clips on the timeline and their linked audio file would be to spend with them.  If I passed the video to a different video track, say, an existing clip, the audio would also move to a free audio trail entry and not automatically on any what audio existing.  This would allow me to rearrange the clips on the timeline simply by moving and using other video tracks as temporary storage location... easily and loses not or write on any other audio existing.

  However in first Pro CS5 if I do the same thing, the video will move to the other video track I move, but the audio will remain in the audio track say and will write on any audio existing when the mouse button is released.  The only way to get around this, I do not see in the manual is to: (1) drag the video to the other track video, and (2) press the CHANGE of <>key, while that (3) dragging the audio linked to a different audio track to avoid audio existing to be written too.

  My question: is there a configuration: I put in CS5 to allow moving / dragging clips to work as in Premiere Pro 6.0?  I already messed up several times in CS5 inadvertently overwrite audio existing.

  Your expert advice and recommendations would be greatly appreciated.

  THANKS IN ADVANCE.

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  davdav99 wrote:

  However in first Pro CS5 if I do the same thing, the video will move to the other video track I move, but the audio will remain in the audio track say and will write on any audio existing when the mouse button is released.  The only way to get around this, I do not see in the manual is to: (1) drag the video to the other track video, and (2) press the button, while (3) dragging the audio linked to a different audio track to avoid audio existing to be written too.

  My question: is there a configuration: I put in CS5 to allow moving / dragging clips to work as in Premiere Pro 6.0?  I already messed up several times in CS5 inadvertently overwrite audio existing.

  Unfortunately this his how ist done now.

  The workaround is indead now SHIFT and dragging.

  There is no way to put it as he was at 6.0.

  You'll get used to it over time, we all had.

• Installed Layered Service Provider (LSP) is defective, lose the internet connection

  One of my computers lose the ability to connect to the internet once a day or two.  When this happens, I can not connect through broadband or modem.  Usually, he regains the connection after an hour or two.  It also includes the connection when I restart the computer.  The problem started after about a year of use on this computer.  The computer is a Toshiba Satellite A215-S4757 with Vista Home Premium, Version 6.0 (Build 6000).  Other computers do not have this problem.
   
  Windows Network Diagnostics displays the message:
   
  A required network component is not working properly on this computer
   
  A provider bunk (LSP) installed is defective.
   
  Remove the defective network component
   
  I have thoughts on what is causing the problem and how to fix it.

  
  

  ICS internet connection sharing. A computer connects to the internet and
  others connect to the computer first. ICF (Internet Connection Firewall)
  protects against intrusions.
   
  http://support.Microsoft.com/kb/811259
   
  Manual steps to recover from Winsock2 corruption for Windows Vista users
  Winsock corruption can cause connectivity problems. To solve this problem by
  using Diagnostics of the network in Windows Vista, follow these steps:
  1. click on start and then click Network.
  2. click on network and sharing Center.
  3. in the network and sharing Center, click on diagnose and repair.
  Note You can also access the network and sharing Center in Control Panel.
   
   
  Reset Winsock for Windows Vista
  To reset Winsock for Windows Vista, follow these steps:
  1. Click Start, type cmd in the start search box, right-click on cmd.exe,.
  Click on run as administrator and press to continue.
  2 type netsh winsock reset at the command prompt and press ENTER.
   
  Note If the command is correctly entered, you will receive an error
  Message. Retype the command. When the command is executed successfully,
  an e-mail confirmation will appear, followed by a new command prompt. Then, go to step
  3.
  3. Type exit and press ENTER.
   
   
  --
  ..
  --
  "wuverton" wrote in message news: 19cb1db0-a9f8-493-a332-8725d 6165869...
  > I found a temporary solution. It seems that the Internet (ICS) connection Service
  > the origin of the problem. When I stop this service, I immediately
  > again to the Internet. If I take ICS, I lose the connection. ICS
  > restarts when I reboot, so the solution is temporary.
  >
  > Among other things, ICS provides intrusion prevention services. Is it
  > blocking of the Internet to stop trespassing?
  >
  > It is sure to have turned off ICS? If not, how can I permanently fix ICS as well
  > just to stop my internet connection.
  >
   
   

• New wifi router installed. Why do connect to sites but lose the connection as I browse even though Windows said excellent signal. To deactivate/activate

  New wifi router installed. Because then I can usually connect sites OK but when getting around a site or to another, I lose connection even though Windows said signal is excellent. Toggle heals the problem temporarily. Two tablets under the same roof using wifi even have no problem. There is no consistency in when the problem arises in any session. It happens in Firefox and Thunderbird. Close and restart the program does not help.

  I tried the reset and it was not good. Then I learned that my wife had a similar problem with his ipad I did what I should have done at the beginning, I restarted the router again. Hey presto, problem solved.

  Now, I'm off to eat some humble pie. Thank you, guigs2

• Problem WiFi on Satellite Pro C660-2TQ - lose the internet connection

  Hey people,

  hope you could help me. I did a new clean install of Win7 (32 bit) on my Toshiba Sat, C660-2TQ.

  His job very well, except one thing:
  the adapter Realtek RTL8188CE-in my laptop is just terrible...

  I installed the latest driver for this Home Premium wifi, but I lose the conn. to the internet all the time.
  While I have to disconnect in the bottom right corner my laptop and connect again manually.
  I have to do this every minute or so and its very annoying.

  I saw read several discussions about the problems with this specific wifi adapter, but no solution has helped me...

  I didn't install all the listed drivers (34 available for me) but then what I Normand to update my BIOS or would it be a driver as the driver for the touchpad is necessary to get my wifi working properly?

  Hope you guys could help me...

  honestly desperate

  cordially :)

  Hello

  WiFi disconnection problems have different causes and its not easy to say why it happens.
  So, you will need to check each step and each option.

  First of all, you will get the latest version of the driver for this adapter WLan on the Realtek driver page:
  [Download driver Realtek RTL8188CE | http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level= 5 & Conn = 4 & DownTypeID = 3 & GetDown = false & downloads = EU tr]

  Would recommend that you do not install this driver.
  Before you begin with the installation, uninstall the previous driver.

  Secondly: it would be possible that this issue isn't related WLan driver and update the driver wouldn't help you much. In this case you should check the other parameters.
  I recommend you to check the router settings and test different standards WLan (802.11 B / G or N).

  In many cases, the problems of compatibility between the router and wireless network card could lead to similar to your question.
  Of course, you should also go to Device Manager-> card WLan-> properties-> Advanced tab
  and must check if you can switch between the WLan standards singles (802.11 B / G or N)
  Power management also in tab (last tab) you must unselect the option to turn off the device to save power.

• Re: Satellite L670 loses the wireless connection

  Hello

  I have a Satellite L670 - 1 H 1, a new laptop that runs Windows 7, with all the drivers and software uptodate, including the wireless card.

  I have a BT Home Hub 3 with an Edimax EW 7416APN v2 300 m range extender to help boost the signal in the kitchen area.

  The laptop works fine when I stay in the room where the reception centre. If I move in the kitchen the laptop will usually lose the wireless connection after a few minutes and I cannot get it back unless I turn the LAPTOP works and return to the Home Hub.

  I see no obvious reason to this problem. Two other laptop computers used in the home, more a smartphone stay connected with full signal in every corner of the House, at any time.

  I have to use the range extender, but is it possible that the laptop Toshiba just don't hear well with it?

  Any advice would be welcome.

  Thank you
  Canton

  Hello Canton

  As you know quality of connection WLAN depends on different factors is not easy to say why you have this problem, WLAN. I use Toshiba laptops for a long time now and I didn't notice in the past some serious question of WLAN.
  For example I'm 4 router with standard g and have very good signal even in the cellar too or out in the back yard.

  If possible, try to test the WLAN connection elsewhere. Maybe your friends have WLAN routers so you can test it.

  You have a new router or old?
  What WLAN standard do you use (b/g/n)?

• Satellite L350 loses the wireless connection

  Can someone please help?

  I have a Satellite L350-170 which perfectly connects to the internet using a cable to connect to my router.
  When you use the wireless to connect, I can only get a connection so I first of all turn off the wireless card and then enable it again, but I lose the connection within two minutes. I can reconnect if again, I turn off and then turn on the map.

  The OS is Vista Home Premium Service Pack 2, fully implemented to date. I have updated to the most recent available wireless network driver. I tried to turn off IP6.
  The laptop is connected to the network and receives a signal of power when it connects.
  When the connection is lost, no networks are detected, but properties card says card works Ok, although Ipconfig says media disconnected. Other mobile stay connected anywhere in the House.

  Thank you in anticipation of a quick solution.

  Where did you download the latest driver for the Realtek 802.11 g (RTL8187B) wireless network card?

  This is the WLan from Toshiba portal, where you can find the latest version of the driver:
  http://APS2.toshiba-tro.de/WLAN/

  I recommend also to renew the IP address if this problem would occur.
  Cmd execute command: ipconfig / renew
  This should help to assign the new ip address

  By the way: in the Device Manager-> Wlan card-> properties-> power management, you can uncheck the mark option which disables the card in order to save energy.

  Have you tested the WiFi with open (unsecured) WiFi connection?

• iMac loses the internet connection when I turn off wifi

  Any help appreciated! I'm not very computer savy! Can my grandson tell me (how) on some things.

  I lose the internet connection when wifi is disabled. It will happen when using any browser, Firefox-Safari-Google Chrome.

  Desktop computer is connected to the modem.

  Model name: iMac

  Processor name: Intel Core i7

  Processor speed: 3.4 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 8 MB

  Memory: 4 GB

  Any ideas? Thank you

  You can use an ethernet cable between the modem (= the internet connector) and the iMac.

  WiFi is like an invisible computer thread worms (among others) the modem. When you switch WiFi off, your computer cannot reach the modem and so there is no internet on your computer.

• Satellite C55-A-1HN loses its Wi - Fi connection all the time

  Hello

  I hope someone can help me because this problem starts to become very frustrating!

  Laptop loses the wifi connection all the time, where as other devices (Ipad, mobile phones, other portable) all have a strong Wifi connection. My network adapter is Atheros AR956x, I tried to date but does not seem to make a difference, unckecking I tried the properties box that says off adapter to save energy, I thought that had fixed, but unfortunately still the same problem.

  Thank you

  Paul

  Hi Paul

  Is there a difference when using the laptop with the battery or the power supply?

• Tine Capsule loses the connection to iMac on El Capitan

  So I thought to myself - allows to change Windows XP for IMac OS - X and I liked the theory behind Time Capsule.  So in Dec 15 bought the new iMac with El-Capitan installed - very nice - steep to overcome - but very nice learning curve.  In January 2016, I bought the capsule and time the iMac continues to lose track of it and the backup fails.

  I read a lot of posts on this problem with earlier versions of Mac OS x, but none with El Capitan.  I tried many suggestions.  I'm willing to stick to this, but concluded that Apple have big network problems - is there any known firm resolution that I missed

  If I unplug power of TC and plug it again TC restarts and fix the link and he stays for a while, but when the iMac system sleeps it seems to lose track of the TC.  The TC continues to work as a hub WiFi in bridge in the whole mode, although the link of TC - Mac itself is ethernet.

  I have the network as [router ISP-> switch-> TC-> IMac].  I have a PC, NAS, hooked to the switch and the printer off the TC - all (other than the iMac/TC) connections continue to work all the time (even the printer connected through the CT.

  Suggestions for things to try would be useful, but nobody knows if Apple are working on it?

  is there a known strong resolution that I missed

  No, it's still coming every day in the posts here.

  Apple tries to do new things via DNS and she has so far trained more than problems solved... It has to do with the hand and swapping the standard network structure and network on equal terms with the iphone or ipad. At least as far as I know. Don't hold me to him as we all users here... and some of the information Apple provide are extremely sketchy.

  I tried many suggestions.

  It is difficult to make suggestions that we really have no idea what you tried... I'll post a link to my standard list below...

  BUT el capo has introduced different bugs... and I find it hard to reproduce... Note that I have not really had most of the questions are people here. I do not use the TC in bridge... but actually force it to take in charge the functions of dhcp for these devices that connect directly to it... and you have TO connect the Mac directly to the CT... He got buried... I'm usually carefully noted the location... but Apple said you need on the computer directly connected to the TC... If it is ethernet or wireless is not a problem... but if you are trying to connect to the switch or the main router, it is not a good idea.

  So, I would recommend that you try this method.

  Re: time capsule Airport Guard disconnection

  There are screenshots of it... and if all that is hard to follow if you please tell me where you are stuck.

  I found I can now exchange the main router with a degree of immunity, as I reconfigure the DHCP and IP LAN on it to match my setup of origin... it's not hard... but it may take some time to wrap your mind around it.

  In fact right now I use a secondary antibody Airport extreme as a WAP browser on the primary... again to help people having to abandon the questions... and I have so far after that many days are perfectly stable.

  If you can do it... change the domain in the main router at the local level

  Maybe it's nothing or it could be something else, such as lan. So in fact, all your names are the. But if the main router uses a field other than mess a few things... Apple seems also is recommended to use the TC as the main router as preferable to the bridge... They recommend same NAT double bridge... IMHO, my static IP method solves the problem, where you can not replace the main router, and the TC regularly loses on the network...

  • A link to this post

• Express airport, used for the speakers, loses the connection to the network wireless after about 30 seconds

  Second generation of airport express base station used to play music loses connection wireless, also a second express network, gen airport after about 30 seconds.  Tried to change channels, reorienting the airport, using a different device - ipod and ipad, to listen to music - nothing works. Interestingly, my Amazon Music plays fine on the same airport and speakers and loses no signal.  Any help?

  Where the two Express base compared to the other station? Same room, different rooms or different floors? The host of iTunes (iPod or iPad) location when the streaming? Near the Express which provides the network Wi - Fi or the one used for streaming?

• mail loses the connection (ssl, imap) from El Capitan. Still works with Thunderbird.

  Since the update to El Capitan, mail.app loses the card connections. Unlike a similar question here, mail load my new mail first, but then when I try to delete emails, or put them in a different folder, it displays a point exclamation and after a minute or two puts mail in the Inbox. After a trial of second (or fifth or tenth), it works.

  This happens no matter if is iCloud or another card account. And - the same account works well with thunderbird (same settings ssl).

  So it's certainly dependent on the mail program, and it started with the update of El Capitan.

  Any help?

  Maybe my post to Re: recurring IMAP connection errors will help you.