Loss of connection without wire-intermittent

Similar Questions

• Loss of connectivity without wire - Vista

  I use Vista Home Premium which is preinstalled on my Dell Inspiron E1705. I connected wireless to our Netgear router for almost 3 years. In the 2 months my computer does not connect to the home wireless network. It will connect to the other public wireless networks but not mine. I tried to update the drivers on all components of the network card and that has not worked. Any help would be greatly appreciated

  Hi Krisw6164,

  ·         You receive an error trying to connect?

  Try the following steps.

  Step 1

  Remove all wireless networks, and then restart your computer.

  1. click Start and select Control Panel.

  2 open network and sharing Center.

  3 click on manage wireless networks.

  4. Remove the wireless network that you do not have or that you do not use.

  5 restart the computer and try to reconnect to your wireless network.

  Step 2

  1. open network connections by clicking the Start button, click Control Panel, click network and Internet, clicking network and sharing Center, and then click connect to a network .

  2. click on 'show all' and press the Refresh button. If you find any active network connections, select the one you want, click on 'Connect' and don't forget to check the option that says 'start this connection automatically '. If you check this option, Windows Vista will automatically connect to the network selected whenever you log.

  For more information, see the links below.
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

  View your preferred wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/view-your-preferred-wireless-networks

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Slow connection without wire-Intel 3945ABG card on Inspiron E1405

  I've never noticed this problem before because I never had a more than 5 Mbps connection. But a few weeks I had a 15Mbps internet connection cable and am using a Linksys WRT54GS router with him. My laptop (Inspiron E1405) never seems to get 5Mbps > 4 - the wireless. I've finally isolated the problem on my laptop, after test with a friend too, where it was stuck at 4-5 Mbps too. When I directly connect the modem (ethernet), I get the expected 17-19 MB/s, so my ISP is not at fault.

  I've been watching online solutions, and here is what I tried so far, but without positive result:

  1 tried to use different channels on the router (1-11).

  2. I tried a Linksys tech support - they suggested a few settings more to the router... no permit.

  3. update my Intel wireless drivers... has the last being now... but no effect.

  4. have you tried using Intel PROSet/Wireless manage my connection and Windows too, both give me the same slow speeds.

  5. uninstalled and reinstalled the drivers for my wireless card several times.

  I have another laptop with Vista, and who gets at least 15-17 Mbps on the wireless. I am now at a loss and plan to test external wireless card, so I can at least isolate the problem of my wireless card.

  I am currently using XP Professional Service Pack 3.

  Any thoughts?

  Thank you!

  
  

• Problems of connectivity without wire - HP ENVY 14

  I have a HP Envy 14 2020nr that will not connect wirelessly to the internet.

  It recognizes all networks within range, but does not connect (it gives me a "Restricted access" message and I can't use the internet). I can only use internet if I'm directly connected via an ethernet cable.

  All other devices in my home (computers laptops, phones, tablets) are not having problems to connect to this router. The troubleshooter in Windows is unable to solve the problem.

  I tried reinstalling the drivers, update BIOS and restore to the latest wireless drivers them.

  Any help would be greatly appreciated!

  Thank you.

  Hello

  The wireless card detects that your network is there a secure network try to change the password and try again, it's something to do with the WEP key.

• When you try to send a photo to print to a Connection without wire, why the fax page?

  I have a printer hp photosmart premium and tried to print photos using the wireless connection, but it seems to want to fax from the photos instead of print, why?

  Hello

  ·        What operating system is installed on your computer?

  ·        Were you able to print before pictures?

  ·        You did changes to the computer before the show?

  ·        What is the model number of the printer that you are using?

  You can follow the steps to fix the problem:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I would say also you contact HP support as seems to be the problem with the settings of the printer.

  http://h30434.www3.HP.com/

• How to make a connection without WIRE of Windows PC based on the 670 printer iPF

  Is it possible to connect to a Windows-based PF (Windows 7 or Windows 10) to the iPF PROGRAF 670 printer (by using a router or other means if necessary)?

  Hi BryanGraham,

  Use the ethernet on your imagePROGRAF iPF670 port, you can connect your router to your printer with an ethernet cable and then any computer that accesses your router (wired or wireless) can then use your iPF670 imagePROGRAF on the network connection.

  For more assistance, please call 1-800-423-2366, Monday to Friday 08:00 to 08:00 pm et, except holidays.  .  There is NO charge for this call.

• All in one C310 wrong with connection without wire/printer offline

  When I try to print from computer the printer status is offline.  I have a Norton 360 antivirus and don't know if it's my problem to allow me to print. The printer itself is set to my router.  I was able to print from HP ePrint.   Why can't I print from

  Web site?

  Can you please help?

  I recommend without reservation the IP address of your router and to do this:

  Let's define an external static IP and DNS address for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Can Satellite Pro M30, you help me how I can connect the wire of the COM series?

  Dear Sirs,

  Can you help me how I can solve my problem:

  I have TOSHIBA Satellite Pro M30 computer and as you know there is no Serial Port COM in this model.

  Can you help me how I can connect the wire of series Com (SR232 DATA)?

  Where I connect on the updated satellite of reserve.

  For your information I have is also trailer male sides.

  Concerning

  Ali H. Ba - Aqeel

  [email protected]

  Hello
  you´ve got the alternative to get a PCMCIA Serial Port adapter.
  The Installation was easy to my laptop and runs without problems under Windows XP and 2000.

  Have a try.

• Wireless connection is very intermittent

  We have 2 identical home laptops. My husband connects wireless without any problem. My connection is very intermittent, but they are both configured exactly the same.

  Any ideas anyone?

  Hello

  There may be a few ideas, but you will need to tell us more about the circuimstances.
  There is an old problem of driver with the card Intel 2200BG that may affect the connectivity. Let us know if this is the wireless card you have and what is the version of the driver.

  BR
  Tom

• Satellite Pro L450 - network without WIRE Realtek RTL8191SE adapter: limited access

  Hello

  Hoping you can help me with my problem with the wifi connection.

  OS: Windows 7
  Wireless adapter: Realtek RTL8191SE Wireless LAN adapter
  Laptop: Toshiba Satellite Pro L450
  Wireless router/modem: Cisco

  When I turn on the laptop the wifi connection can work for 10-30 minutes, but then the down network access but remains connected with limited access.
  Then restart the connection will have access limited the offset.
  In addition, sometimes the available wireless connections do not show in the networks available on the windows toolbar.
  When you use the Ethernet cable connected to my router there is no problem.

  I have searched the forums for help on this and have already tried without success, the following

  Updated driver: issue date may 2010
  Verify that TCP/IP has been installed to automatically obtain the IP and DNS
  Disabled firewall
  Reset the modem
  Countless reboots of the modem and the laptop

  Wireless modem/router works perfectly as I can connect with other devices and laptops.
  Is it a problem that we see on a regular basis with this combination of laptop card / without wire/operating system?
  Would appreciate any guidance you can give me as it becomes very frustrating.

  Thank you

  Kieran

  Hello

  I see you didn't check the BIOS!
  Here you can compare the BIOS with the version update available.
  If you have an older version of the BIOS on the laptop, then an update would be recommended.
  Once the update to the BIOS it defined it please to the default settings (press BIOS F9 and save)!

  By the way:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads
  Here you can find the latest WLan driver
  It s v.2015.1.0427.2010 at the moment

  PS: I hope that Windows 7 is up to date...

• Pavilion g6-2215sia: CARD without WIRE NOT DETECTED AFTER UPDATE BIOS

  Recently I have updated my BIOS on my laptop HP Pavilion g6-2215sia think he'll adjust the hardware acceleration feature missing in my system (there is no option in my BIOS to enable virtualization technology). My BIOS version was F.12 and I've updated to F.24, but after update BIOS all my wireless functionality no longer works (including my wifi and bluetooth), and still there is no option to enable virtualization technology in my BIOS settings. On my Windows 8.1 x 64 Pro wifi and bluetooth options are grayed out so I can't turn them on or off. I tried to reinstall my bluetooth driver, but the software says that it doesn't detect any bluetooth hardware. Even when I restart and boot in all my Linux distributions installed on my system (Ubuntu, Quina and Kali Linux) and my x 86 Android, they still do not detect my wireless capability (says Ubuntu, "wifi is disabled by hardware switch").

  To confirm that this was not a software problem, I has conducted an audit of start-up and tested for my wireless module and got this result, "without WIRE MODULE CHECK: NOT INSTALLED". The only way I can get my Windows operating system to recognize my wireless (wifi and bluetooth) is now by doing a hard reset, when I unplug my laptop from the power supply, remove the battery and hold the power button for about 30 seconds. When I turn on my system, then I can turn my wifi/bluetooth on my Windows. But if I restart my system the problem comes back and I can't turn on my wireless. So basically, I have to avoid questioning my system off and only Hibernate, so that whenever I turn on my laptop I can use the wireless. If I restart my system so I have to repeat the hard reset in order to use my wifi/bluetooth, which can be very annoying.

  The problem is that I often use my other Linux disributions and I have to restart before starting in them so that my readers will be mounted read/write, and when I do my Linux can not detect my wireless and it's a serious pain for me because I need to use my wireless often for internet connection.

  Please I really need help on how to fix this and get my wireless working normally without having to do a hard reset every time. I tried to restore my BIOS F.12 unfounded but I don't have the image file (I extensively searched the Internet to find, but does not). I've even updated again to F.26 but I still have the same problem (my current version of BIOS is F.26).

  If you see no updates the BIOS in your list of drivers - where do you have the updates to the BIOS, you used?

  Try here - if you do not see the list of the BIOS, use the "Edit" button to change Windows 8.1 to Windows 8:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2200-notebook-PC-series/5296082/model/5315061

• Cannot connect to new modem/wireless router with Dell Inspiron 510 M, but our other machines will connect without problem.

  Old modem/router died, received the new modem and Netgear router separate from Comcast

  Two other laptops (MSI Wind Windows XP, HP 6930p-Windows XP) and my Samsung smartphone connect with no issues.

  Dell Inspiron 510 m is able to connect to the network without wire of a neighbor, but none of our other machines are able to because of the configuration of network security.

  When the network security key for our network on the printer Dell, Dell dialog box displays only 8 digits, but the security key is 10.

  Hello

  Replace the key to WEP (wired equivalent privacy) security check and the settings of the router if you are able to connect. Follow the steps mentioned below.

  Change the WEP key in Vista:

  a. click the Start button.

  b. click Network in the right column in the start menu.

  c. click Network Center in the menu bar horizontally.

  d. click reorganize wireless networks.

  e. double-click the wireless network you want to change.

  f. click on the Security tab.

  g. changing the network security key and the encryption type.

  h. click OK.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A200 (PSAE3) how to restart an interruption of the connection without rebooting

  Hello, I just bought my computer toshiba laptop.

  I use a FRITZ. BOX for my wireless network.
  Sometimes I lose the connection one can not reconnect with the programm "connectivity without config doctor."
  Also sometimes the Red (antenna) is.

  The only way is to restart.
  Are there other solutions without having to reboot?
  Can I configure the intensity of the signal?

  Orry

  Post edited by: orry

  Hello

  I think I know what might be useful for your problems of WLan boring;

  -Update the BIOS
  -WLan driver update.

  Yes, these two parts of the software must be updated to make sure that the WLan would work properly.

  One of my friends had the similar problem of WLan; He solved update driver WLan.

  After the update of the Wlan signal driver WiFi was much stronger as with the previous version of the Wlan driver.
  BIOS update help stop WLan sudden disconnects.

  See you soon

• Loss of connectivity

  Loss of connection to the internet even if the other computer in our home group has connection

  Hello

  1. what version of Windows are you using?

  2. you receive an error message?

  3. have you made changes on the computer before this problem?

  Please visit the following link.

  Wi - Fi and in Windows network connection issues. http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I suggest you to respond with more information to help you best.

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

• RALink RT3290 stops responding after waking up from hibernation, loss of connection

  RALink RT3290 802.11bgn Wi - Fi adapter (driver 5.0.37.0 25.11.2013) stops responding after waking up from hibernation, loss of connection. To recover, it must be restarted (toggle), what happens no wired connection, for example, obviously, drivers Ralink need good alarm clock a reset. Thank you in advance.

  Looks like that driver update solves the http://www.mediatek.com/en/downloads/ problem