Loss of XPS12 networking\internet, 8 Windows Hyper-V on wifi

My laptop the host is the xps12 with Windows 8, and I connect to the internet via wi - fi. I have a computer virtual Hyper - V Windows 8. In Hyper-V Manager, I have a single virtual switch with a connection type "external network."

When I load my Web VM works for a short time within the virtual machine, and then it stops arbitrarily. Once it stopped, I go to the host and can browse the internet. A few minutes later the internet host will stop working. If I go back to the internet, virtual machine then began to work again. It seems that only one instance of my internet connection (host or VM) works at once and they change after a while. If I reset the chosen external network in the Hyoer-v Manager for nothing and then back to the Intel value above it begins to work immediately in the virtual machine. If I stop the virtual machine, my host, internet connectivity is not immediately, but if I disconnect and reconnect to my wifi it reconnects.

Does anyone have an idea what night be the cause and would be able to offer a solution?

Thanks in advance!

Anthony

Update to the update:

social.technet.Microsoft.com/.../e33bb8d9-df4c-4E26-989f-fbfd59fb000f

Create a virtual switch internal with a bridge between who and the wi - fi can work now...

Tags: Dell Products

Similar Questions

  • Pavilian dv6 - 6 c 13nr: loss of controller network after installing Windows 7

    My hard drive has failed, and when I replaced it, I did a new install of Microsoft Windows 7 Professional.  Work of connection't wireless (he did) I know that I need to put the correct drivers back to, but I don't know what network contraoller I; any ideas or suggestions?

    Hello:

    According to the list of parts for your laptop, it comes with the Realtek 8188CE wireless network adapter.

    This would be the link to the driver you need for this model of the wlan card.

    This package contains the installation package driver for the controller LAN Realtek RTL8188CE wireless in the laptop models running a supported operating system.

    File name: sp57049.exe

  • Whenever I restart Windows 7, I have to turn off and then turn on my network connection get Windows 7 to recognize my wired Internet connection. What is going on?

    I installed Windows 7 Pro on a system newly built using a motherboard Gigabyte Z77x-UD5H, Intel I7 - 3770 K CPU and 32 GB DRAM3, on a SSD OCZ Vertex 3. Everything went well. It is now about three days, since I installed the operating system. I've been adding on software and other general photo editing programs. The Internet would still work. NOW all of a sudden I lost my Internet connection.  Whenever I restart Windows 7, I have to turn off and then turn on my network connection get Windows 7 to recognize my wired Internet connection. What is going on?

    Hello is a network installed by Apple, iTunes more often software Protocol.  If you do not use iTunes * (or other Apple related programs streaming) you don't need.  If you do not use iTunes check if there are any available software updates.

  • No Internet after windows updated August 18.

    No Internet after windows updated on August 18, to return from vacation.

    System Restore to 8 August which worked yesterday and restored internet, but when you sign in today update windows automatically installed and once again no internet no access. Computer won't let me restore of the system now well I tried different dates - said the system restore could not replace the file (c: Windows) with the original copy of the restore point - an unspecified error has occurred in 0x80071a90.  Still no internet access.  Any ideas please?

    The KB2705219 update could be the cause and uninstall that solved the problem for some users.

    But...

    In another thread [my computer today installed windows 7 updates, but my internet has been lost.] But the network is visible. [what caused this?] a user has identified this notice - McAfee

    Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

    While it remains the case that uninstall Win7 KB2705219 solved the problem for at least two users update, you might want to consider the McAfee fix, as appropriate. At least two users also reported having removed then reinstalled McAfee and their systems were back up & working properly afterwards.

    I have McAfee, but the connection has started working again on its own so I thought I was clear of problems.  However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually.  So stick with McAfee without following their abduction - Reinstall procedure would have upgraded my PC at risk by not updated.  Actually, I removed and then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].  My home network has survived without any new replacement set - firewall Windows just took the right settings without any complaint.

    I had to run the MCPRT deletion a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  • Windows 8.1 and cannot connect to the internet even though I have full WiFi access.

    Original title: Windows 8.1 and cannot connect to internet even though I have full WiFi access-problem occurred just after working fine for over a year

    Uses Windows 8.1 for over a year with no access to the internet.  Today, I can access is no longer the internet using Explorer, Mozilla Fire Fox or store apps.  (Tried to install a game just to test the internet connection-no luck).  When I try to connect the computer just sits there with the indicator connection just spin but never passes through.  I have good indicated WiFi (Internet) access.  While they inspected the updates, the only thing that appears on the current date is some Microsoft Silverlight is.  Could that that may cause my problem?  I didn't do any changes and have no problem until today.  I'm not always well informed in this area and I am at a total loss as to how to proceed, what to check... hope someone can advise me.   Thank you, DebbieG211

    Hi Debbie,.

    You might face this problem because of wrong settings in Internet Explorer. You mentioned that you get the update of windows Microsoft Silverlight, so we can deduce that there is a problem with the Internet browser. Please write us with the following details.

    (1) do you get error messages when all websites fail to load?

    (2) what is the brand and model of your computer?

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-8

    You can also follow the steps in the link below for further troubleshooting. It is a tutorial to solve the problem of wireless and wired connections.

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Let us know the details asked and the status of the issue.

  • 15 - ab277cl: network drivers for Windows 7 (15-ab277cl)

    I'm moving my new laptop (15-ab277cl) to a SSD and windows professional 10.

    So far, I installed the new SSD and installed a clean version of Windows 7 on it.  I bought windows 7 Professional separately and plan to use windows update to get the 10 Windows free professional upgrade after installation.  However, I can not connect to internet because I could not find the drivers for my LAN or wireless, given that HP has only network drivers for Windows 10 for my laptop model (http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-15-ab200-Notebook-PC-series/8499306/mode...

    As long as I can get working Internet wireless or wired, I should be able to use windows update to reach Windows Professional 10 and then all drivers must be supported, but I'm stuck until this happens.

    Here's my hardware ID:

    Ethernet controller:

    PCI\VEN_10EC & DEV_8136 & SUBSYS_8092103C & REV_0A

    PCI\VEN_10EC & DEV_8136 & SUBSYS_8092103C

    PCI\VEN_10EC & DEV_8136 & CC_020000

    PCI\VEN_10EC & DEV_8136 & CC_02

    Network controller:

    PCI\VEN_8086 & DEV_3165 & SUBSUS__40108086 & REV81

    PCI\VEN_8086 & DEV_3165 & SUBSUS__40108086

    PCI\VEN_8086 & DEV_3165 & CC_028000

    PCI\VEN_8086 & DEV_3165 & CC_0280

    Any help would be appreciated.

    Thank you very much

    Brian

    Hi, Brian:

    You need these drivers...

    Ethernet controller:

    This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

    File name: sp71191.exe

    Network controller: 2nd pilot on the list for W7 x 64...

    https://Downloadcenter.Intel.com/download/25510/Intel-PROSet-Wireless-software-and-drivers-for-Windows-7-

  • Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

    Original title: Unable to connect to the wireless network

    Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

    I should add that I have tried the solutions of the previous forum on this topic, and none worked.

    Hi Marilynnla,

    Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

    Read this article and follow the steps. Lets see if it helps in any way.

  • NO wireless network connection - message "Windows could not find a certificate to connect to the network Shaida. How to fix this problem?

    I had just restored my Thinkpad T60 the default setting. Reformatted and reinstalled Windows XP, but I am unable to connect to the wireless network connection - message "Windows could not find a certificate to connect to the network Shaida.

    Shaida is my wireless modem.

    How to fix this problem?

    Before the resumption of connection Internet worked normally.

    Hello

    I suggest you to follow the steps in this link and check if it helps:

    http://support.Microsoft.com/kb/870702

    It will be useful.

  • My PC does not connect to the Internet, a window opens and says DNS server does not respond.

    Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

    My PC does not connect to the internet, a window opens and says DNS server does not respond.

    Hello

    Follow the steps in the article mentioned below and check if it solves the problem:
    http://support.Microsoft.com/kb/314095

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

  • The computer keeps a log of connection/disconnection to the network/internet?

    I experience several internet connection all day breaks.  My computer keeps a log of connection to the internet and disconnected from the internet, so I can track how many times this happens and when?

    Hello

    ·         What is a wired or wireless network?

    ·         Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1: To keep a log of connection/disconnection to the network/internet, you can download and install the software. Check out the link for more information below:

    Microsoft Network Monitor 3.4

    http://www.Microsoft.com/download/en/details.aspx?ID=4865

    Method 2: You can also see the article for more information on the the event logs for network problems.

    Using event logs Windows Network Diagnostics to solve network problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems

    Method 3: Check out the following articles for more information about the resolution of network problems:

     

    You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

    http://support.Microsoft.com/kb/928152

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

     

    Network connection problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    Hope this information helps.

  • Windows 7 Home Premium Wifi grey symbol with a star yellow but fully connected to the internet.

    Windows 7 Home Premium Wifi grey symbol with a star yellow but fully connected to the internet.

    Have been able to fix it by uninstalling the driver wireless and re - install, but when the system is restarted it then returns to the same problem.  Tried to remove the data of the registry key 'TrayNotify' windows and stopping the same tried to remove "explorer.exe" and replace "explorer.exe".. even goes back to the same problem.

    It is likely that your computer sees and is seen by your router.  Gold Star means that it is connected, but the router will not assign an IP address to access the Internet.

    This is usually caused by a code password incorrectly stored (on your computer).

    Click on this icon.  Find your network.  Remove it from the list.  Now, after a small wait, click this icon again.  It should detect your network and ask for the password.  If you have entered the right code, it should connect you.

    If these steps do not resolve the problem, then it is likely that you would have a problem with your router - it might be inside a separate device or your modem.

    A restart of the modem and router can help.  Pull the plug on the modem and the router.  Wait 30 seconds.  Put the plug in the modem only.  Wait 30 seconds.  Put the plug in the router.  Wait 2 minutes.  If she can still connect, try re-booting the computer.

  • Need network drivers for Windows 7 on Macbook Pro

    Original title: Network Driver issues on Macbook Pro

    I just use Boot Camp to install Windows 7 on my Macbook Pro. My question is, why he does not download and install the drivers to allow me to connect to a network? I can't connect to the internet on Windows and Im getting very irritated with all the help saying to go online when I do not have the right drivers to do. I was literally just $90 for doing absolutely nothing. Any help is appreciated.

    Hello

     

    Please join Microsoft Community where you can find the necessary information on Microsoft products!

     

    You need network drivers for Windows 7 that is installed on the Macbook.

    Drivers are the software used for communication between the operating system and a device and will be provided by the manufacturer of the device.

    To use them, we would have to download and install them.

    You can get the drivers for the Macbook Pro from Apple's site.

    For further assistance, I suggest you to send a query to the Apple support site:

    https://discussions.Apple.com/community/notebooks/Macbook_pro

     

    I hope this helps. If you need additional help, let us know and we would be happy to help you.

  • Unable to connect to the internet in windows 7

    One of my computers cannot access the internet.  I can connect to the network with bot WIFI and ethernet direct connection and I have access to all other currencies netwrok as other readers comptuers and netwrok, but I can't go online with any browser. Other devices at home are able to access the internet.  I suspect that the malware has created the problem, but I can't understand how to fix it. It's what I've tried so far:

    • Scanned for and deleted all adware, malware etc.
    • Performed a system restore to a date where it still worked
    • Uninstalled and resintalled all the adaper nwteork drivers
    • To check all the connection network and netwrok adapters, used Windows troubleshooting. Windows thinks everything is fine.
    • Tried to connect to other networks.
    • Off the fiewalls
    • Protected mode disabled under Internet Option/security
    • Tried the following comand guests: netsh int ip reset & netsh winsock reset
    • Reset the wireless connection
    • Uninstalled Anit-Virus software

    I can't think what this or else I can do, so if anyone has any suggestions, please let me know.

    Hello

    I suggest you follow the link below to fix the problem.

    http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

    Please perform troubleshooting and respond with results. I'll be happy to help you.

  • How to map an instance record as A Local or network drive in Windows 7?

    How to map an instance record as A Local or network drive in Windows 7?

    Try this list of steps and see if it helps.

    Step 1: Open my computer and click on the button 'map network drive '.
    Step 2: Name the folder and select "connect using different credentials and then click on"connect to a Web site that you can use to store your documents and photos. "
    Step 3 - click on "next".
    Step 4 - Select "Choose a custom network location" and then click "Next".
    Step 5 - Type in 'ftp://yourwebsite.com/' as address network or Internet
    Step 6 - uncheck "Log anonymously" and type your user name for FTP access.
    Step 7: type a name for this location.
    Step 8 - click on finish
    Step 9 - now, when you double-click your new network location, you must open a session. Type the password, uncheck the box "connect anonymously and finally check the backup password, unless you want to enter each time.
    Step 10 - transfer your files of images to the server, as it is a folder on your PC.

  • Network stops working @ Windows 7

    Sometimes I just lose all network connections. I checked the event viewer, and he said: warning - customer DNS events

    Name resolution for the name of redir.metaservices.microsoft.com has expired after none of the servers configured DNS responded.
    Name resolution for the name of www.bloggportalen.se has expired after none of the servers configured DNS responded.
    Name resolution for the name of cache.jobb24.se has expired after none of the servers configured DNS responded.
    Name resolution for the name of gateway.messenger.hotmail.com expired after none of the servers configured DNS responded.
    Name resolution for the name of www.google-analytics.com expired after none of the servers configured DNS responded.

    It is only some of them.

    To get my network/Internet to work again, I restart or turn off-> activate my network to the card settings.

    This gets really annoying, most of the time it happens when I have much browserwindows opens, or when I open many programs that uses my connection (especially Torrent/DC).
    I've never experienced this problem in Windows XP or Windows Vista SP1.

    I run Win7 RC x 64, Networkdrivers 15.35_nforce_win7_64bit_international_whql.

    It seems that a lot of ppl have this problem, but none has a solution.

    Hello Kitty8,

    Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is a problem installing Windows 7 positions and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

    http://social.technet.Microsoft.com/forums/en/category/w7itpro?ITPID=sprblog

    Thank you

    Jack

    Jack
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • How NI PCI 4474 DSA detects an overload to the input channel?

    I read "Manual user OR dynamic signal acquisition." It is written that NI PCI 4474 support only digital overload detection. Here's my question. What is the detection of digital overload? If an analog signal is already converted to digital signal, it

  • Slow assisatnt DAQ with events

    I have a question on the DAQ assistant. I'm currently programming an application automation at least 8 simultenously FOR loops and I use 3 different converters AD / DA. My problem is that when I'm working with the DAQ assistant nor (NI USB 6229) in t

  • I can't launch the abuse to partition windows firewall

    in my windows vista the firewall has been turned off somehow, and I can't turn it back on. even as an administor. essential Microsoft could turn on too. I tried to turn on the service manually and still it won't turn. Help, please!

  • How to open PDF files across multiple desktops in Windows 10 Adobe Acrobat Reader task view?

    I am running Windows on an Acer Aspire S7 10.The question is, when I open a PDF on your desktop and then move to another office using Windows task view, I can't open a new PDF file open on the new office. What is the reader is that it opens the PDF o

  • Update / fixes ESXi single host with VCSA running on it.

    We have just updated since the free version of ESXi 5 by ordering the Kit of Essentials. In the process, of course, we were able to deploy vCenter Update Manager (which has been the main motivation, like patching manually the free version seemed to b