Lost and confused

Similar Questions

• Completely lost and confused about this thing of VM...

  Hello... I'm eager to try this thing any virtual machine so that I can try windows 10. I can't just update windows 10 because I use my laptop for school and there are too many conflicts, glitches, or whatever you want to call them between the programs that I use for school and windows 10. in any case and through my school I have access to the Dreamspark site and downloads (if you are not familiar with what is, I think that its really irrelevant necessarily anyway). Well, I burned the iso image to a disc and I have a folder of virtual disk on my computer so I think that means that I have downloaded the program, but when I open it and try to run it it always says that to restart or insert media that tells it where boot them from. so I try to run the components of integration of the iso image and he tells me the same thing. I am completely lost and totally frustrated and hope that someone can better explain the proper procedure, I should take to do this "thing"!  the operating system running on my laptop at the start is Windows 7 Professional 64-bit. Don't know what other info would be relevant, so if I left out anything important, just ask and I will specify.  Thanks in advanced for any help.

  I'm not familiar with the Microsoft Dreamspark program, but install Windows 10 on a Virtual Machine on a host Windows 7 is pretty simple using VirtualBox, a free application.

  The following link can walk you through it step by step:

  http://www.groovypost.com/HOWTO/Windows-10-install-VirtualBox/

• Lost and confused... .cannot get LR to find the catalog.

  I recently managed to corral all of my photos one a LaCie Rugged hard drive. It is the reader where I intend to keep my LR photos to have portability. As I have all my pictures on HD, as I did on the iMac running the latest available software, I changed the name of the catalog to "My Photos Lightroom"

  that are stored on the drive that is labeled "LaCie Photos".  After you get them on the LaCie during the same session, I was able to view them without problem.  Okay, I take the drive and connect it to my MacBook Pro, running the same operating system.  LR could not find the catalog.  I tried several 'remedies', which none worked.  I went back to look at the catalogue on the iMac to see how it has been configured so that I could do the same thing on the MacBook and iMac could not find the catalog.  Until I really mess up things I'd rather have someone more competent as me give me some simple advice.  Summary: How do running on an iMac and a MacBook Pro to locate and use the catalogue of pictures of LR

  Located on a portable LaCie Rugged hard drive?  I don't know that I placed the catalog where it should not be lost on the path to the catalog. I need to give specific instructions to the computer and I don't seem to be able to do.  Thanks for any help you can give.

  GCR49... I think you are making things very difficult for yourself.

  Why don't you start by putting your photos on the EHD, creating the catalog on the pictures on the EHD? In this way, you don't have to transfer the pictures later to SMT. In addition, file-> new catalogue allows you to create a catalog on the EHD.

  Do not... Are NOT... do multiple catalogs. "Subsequently, with much more practical, experience and focus I can decide to multiple catalogs if necessary" is a very bad idea, except in a very limited situations. Do not forget this.

• Did not of RMAN within a certain time... little lost and confused.

  I am just getting back in RMAN since it's been a while and I have a TEST Env where I play with her. To configure a catalog against my test DB (node 2 CARS). My flame is 99 GB and all exhausted.
  

  SQL> select  name
    2  ,  floor(space_limit / 1024 / 1024) "Size MB"
    3  ,  ceil(space_used  / 1024 / 1024) "Used MB"
    4  from  v$recovery_file_dest
    5  order by name
    6  /
   
  NAME                             Size MB Used MB
  ------------------------------------ ---------- ----------
  +FLASH                          102390  93547

  When I run a database backup command, it works fine, but when I run a backup of database archiveall command then it fails saying:

  RMAN> backup database plus archivelog;
  
  Starting backup at 23-MAR-10
  current log archived
  using channel ORA_DISK_1
  channel ORA_DISK_1: starting compressed archived log backup set
  channel ORA_DISK_1: specifying archived log(s) in backup set
  input archived log thread=1 sequence=154 RECID=266 STAMP=712495830
  input archived log thread=1 sequence=155 RECID=267 STAMP=712496288
  ...
  ...
  ...
  input archived log thread=1 sequence=202 RECID=335 STAMP=712843190
  input archived log thread=1 sequence=203 RECID=336 STAMP=712844322
  input archived log thread=1 sequence=204 RECID=337 STAMP=712844337
  channel ORA_DISK_1: starting piece 1 at 23-MAR-10
  RMAN-03009: failure of backup command on ORA_DISK_1 channel at 03/23/2010 09:40:29
  ORA-19809: limit exceeded for recovery files
  ORA-19804: cannot reclaim 14205059072 bytes disk space from 107363696640 limit
  continuing other job steps, job failed will not be re-run
  
  --FROM THE ALERT LOG
  ORA-19815: WARNING: db_recovery_file_dest_size of 107363696640 bytes is 100.00% used, and has 0 remaining bytes available.
  ************************************************************************
  You have following choices to free up space from flash recovery area:
  1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
     then consider changing RMAN ARCHIVELOG DELETION POLICY.
  2. Back up files to tertiary device such as tape using RMAN
     BACKUP RECOVERY AREA command.
  3. Add disk space and increase db_recovery_file_dest_size parameter to
     reflect the new space.
  4. Delete unnecessary files using RMAN DELETE command. If an operating
     system command was used to delete files, then use RMAN CROSSCHECK and
     DELETE EXPIRED commands.
  ************************************************************************

  If looking at the output, I see that there are like more than 500 newspaper archive which I assume has never been backed up, and they reside in our + FLASH area on our ASM disks.  But I do not see how these files all consume 99GB.
  
  What else can consume it?
  What are my options to make sure that I can save my db and archives connects and then delete them once they are saved.
  
  My RMAN config is as follows:

  RMAN> show all;
  
  RMAN configuration parameters for database with db_unique_name ETEST are:
  CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 10 DAYS;
  CONFIGURE BACKUP OPTIMIZATION ON;
  CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
  CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 1;
  CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
  CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # default
  CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
  CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
  CONFIGURE COMPRESSION ALGORITHM 'BZIP2'; # default
  CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'D:\ORACLE\PRODUCT\11.1.0\DB\DATABASE\SNCFETEST2.ORA'; # default

  Would it be my perhaps of too high retention policy? Should I set it like a day or 2 since it's just a test about

  Create a file for the auxiliary instance pfile before starting.

  See http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmdupdb.htm#i1006517

  Specify the pfile file DB_CREATE_FILE_DEST.

  Hemant K Collette

• How to erase data from the iphone if I lost and iphone is offline

  How to erase data from the iphone if I lost and iphone is offline

  < post branched out by host >

  Hello

  What to do if your iOS device is turned off or offline?

  If your missing device is turned off or offline, you can still implement this Mode lost, lockor remote wipe. The next time your device is online, these measures will take effect. If you remove the device from your account while it is offline, pending actions for the device will be cancelled.

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

• How can I reactivate my iPhone after declaring, he lost and deleted from my ipad

  How can I reactivate my iPhone after declaring, he lost and deleted from my ipad?

  See "how to disable or cancel lost mode?  here:

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

  If erase you your device, which is different from the lost mode, and you must read and understand the information on having cleared your device in the same article.

• How to locate the owner of an iPhone that has been reported lost and deleted?

  How to locate the owner of an iPhone that has been reported lost and deleted?

  You return to the police or to the carrier the phone is bound to and let them deal with him. Privacy laws prevent Apple, or the carrier to disclose this information.

• How can I disable the 'top sites' history of cleaning does not remove this and confusing and a risk to privacy

  How can I disable the 'top sites' history of cleaning does not remove this and confusing and a risk to privacy.
  It also serves as the sites I want to keep are my favorites
  Is there an alternatively an add-on for this

  Hi Wayne_a,

  If you are concerened about your privacy you can turn off this feature:

  Disable the new tab Page

• Satellite 2410-404: screen is lost and the noisy CPU fan

  Hello

  first: sorry for my bad English.

  Now: I have several problems with my laptop:
  1. the monitor/screen is lost and does not stand up, so when I want to work with my laptop, I need to address something against the monitor, so it does not fall on the side. All the solutions to this?

  2. my Cpu fan is really strong and I have already opened the case and cleaned, but every day the noise comes back (assumed that his doesn't turn not very well and communicating with once in a while a part of the computer) and I have to reopen and touch several times until it works normally.

  3. Furthermore, I lost my CD of Windows Recovery (OEM Version). Do I have to buy a new one if I want resettled windows?

  Thanks for any help

  Hello

  1. I guess the lid can not stay in the right position, because the hinges are a little loose.

  2. it looks like something wrong with the rotation of the fan. In such cases the easiest way is to change the fan.

  3. you can buy the CD recovery form the Toshiba service partner in your country. It s not very expensive.
  But you can also install the original Windows operating system on your laptop and then you can install the drivers of Toshiba and utilities. All Toshiba stuff, you'll be able to download from the Tosh driver page.

• my iphone is lost and offline how do know if I allowed to find my phone

  my iphone is lost and offline how do know if I allowed to find my phone?

  iPhone stolen, find my iphone disabled, now what?

• is there such a thing as an internet connection timer? I'm lost and then community internet connection g at different times of the day.

  is there such a thing as an internet connection timer? I'm lost and then community internet connection g at different times of the day. I have just hooked to the nbn (national broadband - Australia Network) and have just bought a wireless modem/router 9323 method. I set it up and it worked. I noticed that I have two internet connections when I go to access the internet. one is a broadband connection and the other is nettcomm wireless 9323. What gives with that?

  You have a connection wireless and broadband that you could use one or the other or both. It is recommended to use one at a time. Contact your internet provider and discuss the issue with them.

• I am trying to enter in the appdata folder to retrieve a trial that I lost and someone suggested looking here

  Original title: appdata folder

  I am trying to enter in the appdata folder to retrieve a trial that I lost and someone suggested looking here. How to do this.

  One way:

  Start-> Run-> Explorer %APPDATA%\protector.exe

  Where you type '%AppData% explorer' in the box before hitting 'OK '.  (Omit the quotes)

  HTH,
  JW

• When you play FarmVille, my computer crashes or I get a notice that "bits have been lost" and refresh the page... usually don't work and I have to start all over again.

  When you play FarmVille, my computer crashes or I get a notice that "bits have been lost" and refresh the page... usually don't work and I have to start all over again.

  I think that there is a prob with this game, it does not matter if you use firefox or IE. Or another browser. It blocks something. Or causes probs.

  FB needs to fix it. There are a lot of people (in a Google search), who are having probs. One way or the other

• I made a disc of recxovery for my windows vista and it lost and recovery marketing tells me I can't do one anather accepted by system haw anather recovery disc__

  I made a disc of recxovery for my windows vista and it lost and recovery marketing tells me I can't do one anather accepted by system haw anather recovery disk

  Hello

  You must contact the system manufacturer for instructions. It is a function of their recovery software, not Windows.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Lost and replaced by a non-operational generic icon task bar items

  We just bought a new, fresh and clean, computer HP desktop with Windows 7. We have installed MS Office and some other tools that we use. We then implemented the taskbar with the tools that we use more. Some of them disappear and are replaced by a generic folder icon. When attempting to launch what it was, we are told that the item is missing and we want to remove the item from the task bar. This only happens with some icons, MS Office - ALL of them, and a few others we installed. This machine is new and has been used for anything except certain configuration and a bit of web browsing. I wasn't expecting to face something so important so early - as the first day! Anyone know what is happening? I saw the other, similar questions (but none where the program behind the icon is lost) and we can't do a system restore - definitely not yet!

  Any help to fix our new machine will be greatly appreciated.

  Thank you - Lawrence

  Hi LawrenceHare,

  Thank you for visiting Microsoft Answers,

  You can try rebuild icon cache. To do this, please follow these steps:

  1. Click Start, then computer.

  2. on the toolbar, click on organize, and select folder and search options.

  3. click on the tab display and mark to select the option of hidden files and folders, and then click ok.

  4. Enter the following directory:

  %UserProfile%\AppData\Local

  5. find the IconCache.db file and rename it to IconCache.db.old.

  6. close the window and restart the computer.

  If this does not work then you can do a Scan SFC.

  To run the System File Checker tool, follow these steps:

  1. click on start toreduce this includes this image and then type cmd in the box start the search .

  2 right-click cmd in the programs list and then click run as administrator. Collapse this includes this imageIf you are prompted for an administrator password or a confirmation, type your password or click continue

  3. in the command calls, the following line and press ENTER: sfc/scannow

    

  Swati K - Microsoft support technician

  Visit our Microsoft answers feedback Forum and let us know what you think.