Satellite 2410-404: screen is lost and the noisy CPU fan

Similar Questions

• Upgrade the hard drive Satellite 2410 404

  Hello

  I want to improve my toshiba Satellite 2410 404 with a hard drive again. For now I have just 30 GB drive and is not enough for me.

  I checked three products to a new Toshiba hard drive.

  MK-8032GAX
  MK-1032GAX
  MK-1233GAX

  The model MK-1032GAX 100 GB is my favorite and now my question is, if this drive work with my laptop (im going to install the drive in a toshiba technical station, don't do myself.) or if I have to change something with my mobile phone, update the bios or something.

  Just tell me what I should do to work with this drive or if my laptop is not ready for it because it is nearly three years.

  Thank you very much.

  Hello

  As far as I know this laptop supports only 20 GB; 30 GB; 40 GB and 60 GB hard drives
  I guess that a 100 GB HARD drive will not be recognized by the BIOS.

  60 GB MK6021GAS HDD
  MP40KF 40 GB HARD DRIVE
  MK30kef 30 GB HARD drive
  MQ20ksf 20 GB HARD disk

  Hope this info will help you

• Re: Where to find Win XP drivers for Satellite 2410 404

  I have a Toshiba Satellite, but I don't remember what type it is.
  I have the serial number and production code that is: -.

  MOD: PS241e-5g7u9-had

  I had a hard drive failure and I have now re-installed XP but I lost the driver disk,
  I need to know what driver I need to download.

  See you soon

  Matt

  Hey Buddy

  I took the model number PS241e and searched in google for some details and discovered that it is of a Satellite 2410 404.

  Isn't fantastic and intelligent? ;)

  Pilots must be placed on the European driver Toshiba page.

  He is a former so search in the area of the Archive.

  Archive->->-> Satellite 2410 24xx Satellite Satellite - 404-> PS241E

  Fun :)

• Satellite 2410-404: General Extension RAM issues

  There are two memory two modules (256 + 256) installed on my laptop Satellite 2410-404. There are two locations of memory on my laptop. I want to thank the memory, but I could not find the answers to my questions, but I looked in the manual and to this site and this forum... My questions are

  1. can I extend 256 MB memory by swapping the memory module by module of 512 MB 256? Of memory should what type of module I take?

  or

  2 Schould I change the bars of memory at the same time? Of memory should what type of module I take?

  3. What can I do with the old memory modules?

  Thank you in advance,
  Vladimir

  Hello

  The fact is that you can upgrade the memory maximum: 1024MB.
  In this case, you can use the max 2x512MB memory modules.

  I've studied a bit and found these compatible memory modules:
  PC2100 128 MB (PA3126U - 1 M 12)
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51)

• Satellite 2410-404: mini pc card no longer works

  Hello

  I have a Satellite 2410-404 with mini pc installed wireless lan card, allowing to work perfectly - up to a few days ago, I installed a pcmcia by levelone wireless network card, just to check if it worked. This was the case, and so I uninstalled the card and the software that came with it. But now my toshiba mini wlan card no longer works! It is actually recognized and installed by the system and shown as being active - but I do not get a connection to wifi even when there is certainly one around. I can't even bring up the list of WLAN networks available (win xp) that normally you can even if there's no matter what available wlan.

  I checked the registry and found several remaining entries by levelone... but dare not change or delete since I'm not an expert at all regarding registry stuff. Another thing that bothers me is that when I uninstall the mini pc card and let windows reinstall, it shows as "3 wireless" or even "WiFi 4", which seems to allude to some "connection 2" still occupied by some zombie levelone wireless.

  I would appreciate any help on this matter,

  TIA
  Rainer

  Hi Rainer

  As you can see all the software, after removing, let a few entries in the registry. In my opinion, you should remove the list of Device Manager wireless card and wireless connections. Restart the device and the wireless card should be recognized and installed again.

  The wireless connection you can configure with option of windows. If you use another client to the wireless Wi - Fi disable windows configuration.

• Satellite 2410-404 updated graphic card?

  I have a portable Satellite 2410 404 and I never have an update of a pilot. Now I have a new program that does not work. I think my grafic or Driver graphics card is too old. What can I do? Where can I find an update?

  Post edited by: Zlatica

  Hello

  See this page of the Toshiba driver:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Satellite 2410-404: which HARD disks are supported

  Hello

  one of our phones, to a new hard drive. What toshiba product are compatible to our Toshiba Satellite 2410 404?

  concerning
  Jan Wernecke

  The problem is that Toshiba provides official information on compatible HARD disk HARD disk sizes.
  But I've studied a bit in the internet and the following four sizes of hard drives must be supported:
  20 GB; 30 GB; 40 and possibly the 60 GB.

  Perhaps more info:
  Must HARD disk supports the improved IDE ""(ATA-5) EIDE interface ".

• Problem of recharging satellite 2410 404

  Hello

  I have a big problem with my laptop Toshiba Satellite 2410 404.

  Battery does not charge. The orange charge light is on, but windows does not say "supported". The State of the battery is 3%. Sometimes (rerely), it grows up to 5 or 6%. If I deconnect the power suply, the laptop turns off after 10-20 seconds. First I thougt it was a problem with the battery, so I changed it - the problem was still there. I also changed the load table (electronic load) but the problem is still there.

  Can it be a problem with the CMOS battery? Because it is empty (If Li-ion battery isn't insinde, laptop loses date and time).

  I updated the Bios to the latest version on the website of Thoshiba and I use PowerSaver...

  Someone has an idea?

  Thanks in advance

  Hi René,.

  I suspect that the problem may be with your power adapter. Your CMOS battery is not the problem, since this normally recharge your power supply when connected to your laptop. The fact that your CMOS battery is also free of charge indicates that the poroblem lies with the load subsystem or the adapter itself.

  Your incorporstes network adapter an electronic controller that adjusts the current goes to your laptop based on demand. I suspect it is insufficient current originally be available to use your laptop and recharge your batteries CMOS and laptop.

  HTH

• I have an IMAc running on the latest version of El Capitan. MY blutooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear.

  I have an IMac running on El Capitan 10.11.6. My bluetooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear - I have to hold down the back of the screen to force it to close.  This message of the 2 line took almost an hour to type as I have no control on the touchpad.

  Hello Kluggerjo,

  Thank you for reaching out to the Community Support from Apple. I know how important it must be able to count on your devices work as expected, and I have a few steps that should help resolve the behaviors you see.

  I would recommend to go by resetting your management system (SCM) controller. MSC helps control and regulate different material on your Mac, including Bluetooth systems.  This article will guide you in this process: reset the management system (SCM) controller on your Mac.

  If you still experience the issue after the test, you can test the behavior to a test user. This will help us to determine if the problem is systemic or isolated to your user account. This article will guide you in this process: How to test a question in another account on your Mac user

  If the behavior is duplicated to the test user, I'd recommend reinstalling El Capitan. This will not delete your data. To reinstall using the recovery mode, take a look at this article: How to reinstall OS X

  If you experience any problems or have any questions, please let us know. The entire community is here to help.
  -Best regards

• Portege M400 is frozen, screen goes black and the fan speed increases when moved

  Can someone help me please?

  I recently received the Portege M400 from a friend 4 days ago and reformatted for Windows XP Tablet Edition.
  Everything's fine until I wanted to move the laptop to my coffee table, but as soon as I move the laptop it freezes, the screen goes black and the fan speed increases dramatically.
  So far I have had no success in the resolution of this problem and I really appreciated, is that someone could help me!

  Have you installed the OS using a Toshiba recovery media or you have installed the version of the OS?

• Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  original title: Auto Adjust

  Hello.

  Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.

  Any help would be appreciated... Thank you

  Try this:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• When I click on a tile (windows8.i) screen just flicks and the program does not open what went wrong and can I fix it?

  * Original title: opening with a tile on the start menu

  When I click on a tile (windows8.i) screen just flicks and the program does not open what went wrong and can I fix it?

  (Moved to customization and ease of access)

  I thought I made the text in a link from my mistake. Here is the page: solve the problems with an app

• Downloaded photoshop elements 12 ok installed and activated, it started and the start screen is displayed and the application is started then stop

  Downloaded photoshop elements 12 ok installed and activated, it started and the start screen is displayed and the application is started then stop immediately.

  Repetition and crashes again. Help it does not start!

  Solved! Tried everything in support documents and none of it worked. Frustration massive Adobe Chat staff who knows nothing and just told me to look at the documents of support again and again. They also gave me a phone number in Australia which has a recorde d message saying that the product is not supported! What is everything?

  Finally Adobe technical support Anand called me (from when I have opened the original case of support which gave me the serial number).

  Just had to rename the file SLCache in c:\program (x 86) and again the EULA and reactive. Now everything works fine. Way to hard.

• HARD drive 80 GB to the Satellite 2410 404

  Hi all

  Can someone tell me whether or not the 2410-404 is compatible with 80 GB HDD? I've got 1.40 bios installed.

  I saw somewhere on the internet, which is the sale of kits of modernization including an upgrade of the bios... What is 1.40 bios or another allowing the 80 GB drives?

  Thanks in advance,
  killahertz

  Hello

  There is no specific information on this subject. As far as I know if BIOS don't support the HARD drive with the largest capacity there is ability to manipulate the BIOS install different updates to BIOS or even other tools. This kind of things you won't find on the Toshiba download page.

  Please check if a provider of HARD disc in your country can help you. I found one in my country. It offers 80 GB HDD even for the old units and it is warranty that it will work properly but is not free.