Lost phone charger connection pins

Similar Questions

• Simulator 4.6 lost phone cover/connectivity

  I had been successfully using the 4.6.0 (BlackBerry 9000) simulator to make phone calls until this morning.  For some reason, there is now no network on the Simulator screen bar, and when I try to place a call it says 'unable to connect '.

  When I got to "simulate-> network properties...". "there are two entrances, and I have nothing for them to change when things worked before.

  I can make phone calls on the 4.6.1 Simulator.

  Any ideas on what could be the cause?  Thank you...

  If the check box is selected, 'Signal stength' is set at its maximum and that doesn't help - run clean.bat in Simulator folder. If that doesn't help - uninstall the Simulator, restart the computer and install it again.

• I lost my charger after 48 hours to get my TPT, FML

  Hey guys, I need help. Can someone point me in the sense how the ends can get a replacement charger? Right now I am using a micro USB cord, I got my phone and connect to a USB port of a my office. This cannot be good for my long term electricity bill.

  I can't believe how long it takes to load this thing. Gadgets, these days are so quick to load.

  I can't find anywhere on the lenovo site to buy a charger without having to buy a TPT.

  Amazon.com here http://www.amazon.com/gp/product/B005HTZNWO/ref=ox_sc_act_title_3?ie=UTF8&m=ATVPDKIKX0DER Double check but I think it's her.

• Gets the error message that says non-genuine Windows, also lost the internet connection when installing Windows 10

  Original title: windows 7 Home premium product...

  I have a dell studio 1737 and was upgraded to windows 7 Home premium 32-bit. I was installing windows 10 when we lost the internet connection and now I get an error message on windows is not genuine. can someone help please!

  Use your Windows 7 Home Premium product key to activate it.

  Windows 7 is pre-installed on my computer, How can I find the product key?

  The product key is located on the COA sticker attached to the bottom of your laptop or in the battery compartment. In rare cases it can be found also in the memory compartment. For systems of the Tower, look at the top or the side of the system unit. It looks like the following:

  

  Click Start > settings > Update & security > Activation > change product key and then enter the new product key, and then click Next to activate

  If you cannot activate Windows 10 after all the above and you are sure that you have the correct edition installed, then please try phone activation:

  Activate your Windows 10 license with Microsoft Chat support

• Pavilion 11 n034TU: lost USB drive connection key

  My phone loses connection to my USB STICK after a period of time (1 to 2 hours) and does recognize not all al. I can't restore the connection nor can I "eject safely device" even if I see the USB icon in the icons in the taskbar.

  The only way I ch. one fix it is to remove the Flash DRIVE dangerously and reinsert it. I'm a bit concerned as I ofen use USB and open the files on it.

  The problem is obvious before I upgraded to Windows 10 so I don't know what could be the cause of this.

  Hi @kmad_05,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that when you connect your USB that all works well for 1 to 2 hours, then the connection is lost and you do not have access to this more.  If you disconnect (unsafely) and you reconnect then you still have access and it responds.

  You had this problem before you upgrade to Windows 10.

  Have you tried to uninstall and reinstall the USB drivers?

  If you USB drive is a hub, try to connect directly to the USB port on the laptop.

  Please check this setting.

  Go into the Device Manager and click on Bus USB controllers.

  On the USB root hub, then right-click and choose Properties.

  Click the power management tab.

  If allow the computer to turn off this device to save power is checked please, uncheck it.

  Repeat this step for all Central root additional USB listed.

  Do you have all your updates including bios and chipset (as appropriate) before the upgrade?

  Have you ran the Windows troubleshooting tool?    Troubleshooting a USB connection

  Have you checked for virus or malware? MS malware removal tool

  To say thank you for answering, please click on the thumbs to the top icon below.

  If this helped solve your problem please choose the solution provided to help others.

  Have a great weekend and good luck!

• Delete my personal data on my lost phone

  I lost my phone. How can I delete all my personal data in the phone and sd card?

  What OS was in the phone?

  You connected to Microsoft Account?

  Take a look at:

  https://support.Microsoft.com/en-us/help/11585/Windows-phone-find-a-lost-phone

  In the same menu, you can find, locate and erase your phone remotely, if you have already configured the parameter.

• Started at Mo and not charging with the charger connected. Charger works. Keyboard not workin except power button / stop. Restarted using ex in car without success. SW

  Started MacBook and not charging with the charger connected. Charger works. Keyboard does not not except the power button / stop. Restarted ex drive no available help hoping that it was a matter of SW. SW and the operating system works very well. Read some info online. Tried to reset the SMC. Now, the MacBook does not start. Can U help me please. Thanks in advance.

  MacBook, 2010, Mac OS X 10.6.8

  Hi Veronica Steward,.

  I understand that you have turned into a series of questions about your MacBook and want help getting the computer to turn on. Here is an article that can help you through the steps to fix this problem:
  

  If your Mac will not turn on - Apple Support

  Let us know how it goes and thanks for coming to Apple Support communities.

  See you soon.

• where can I find my lost phone

  where can I go to find my lost phone

  Where ever you lost.

• Seeing orange blinking after that stop with the charger connected.

  Hello

  I'm new here and I have the following problem.

  Four months after buying the PC (Satellite-Z930-103) I had a battery problem. Suddenly the orange led blinking and the laptop could not be launched. Toshiba service replaced the battery and everything worked fine for about two months. Then the same thing happened again. Because I was working in China, I opened the laptop and disconnected the battery and can be used with the charger connected.

  The PC was sent to a point of service when I arrived at home, where they still indicated a battery problem and offered to change the battery. Because the warranty was expired, I had to pay for it. I refused, because the price they were charging was 300 euros.

  To the surprise... when I received it from the point of service, they have reconnected the battery and the service report said "computer does work well, no fault found '...

  Since I started my fight with Toshiba support and tried to find me a solution. However, the problem was not resolved until today and I have to disconnect the battery and plug it in again after waiting a day every time I forgot to unplug the charger when the shutdown or when he goes into sleepmode) I became an expert at opening and closing of the laptop...

  In any case, maybe someone has the same problem and found a solution, I suppose that it may be a software problem, but Toshiba has not solved until today.

  To describe the problem even once:

  Orange (power) led starts flashing as soon as the computer is powered down (or "standby mode") with the charger connected.
  If this happens, I opened the laptop and disconnect the battery (so I can work with feeder pugged in)
  Then the next day I open the laptop again and re-connect the battery. It works fine until I still forget to unpug the charger, turn off or restart the laptop.

  I'm guessing it's a problem of software and a few simple arrangements or a re-installation of something, it can be solved.

  Because I travel a lot, I love the little thing but I got frustrated at the moment.

  It would be great if I'm right, and someone already had this thing resolved!
  THX advance for any help!

  Peter

  Satellite Z930 is very nice machine designed for mobile use and I am really sorry to hear that you have such problems. I imagine that you can't find some identical threads on this forum so I hope this isn't a "general problem" with this machine.

  I am not a technician but I can't imagine this problem described has something to do with the settings of the software. In the BIOS, you cannot change a large part and in windows, there is a standard Windows power settings and several Toshiba avancΘs.
  Electronic power placed in the motherboard has a few 'standard' functions and switch automatically between battery and power running.

  I can't say for sure, but I guess there must be some problem with electronic power supply. It is not easy to say what the problem is here, and I really wonder that Toshiba service provider was not able to identify the reason why all this is happening.

  Let's see what the other members of the forum think problem described.

• Satellite T130-11U, lost the Bluetooth connection after installing Mobile Broadb

  I recently bought a Satellite T130-11U and established a connection with my Nokia N82, using PC Suite.
  Then I installed my broadband Mobile (operator TMN) and lost the Bluetooth connection.

  There must be a way to overcome this 'conflict '.
  Anyone with the same problem?

  Thank you.

  Hello

  Perhaps this 3rd party application is not compatible and that is the reason why this happens
  But first, you should check if the Bluetooth is always enabled

  In addition, you should check if this issue happen after installation of the new BT stack

  Here you will find the new BT stack:
  http://APS2.toshiba-tro.de/Bluetooth/

  Welcome them

• The iOS to iPhone 4S 9.3 installation fails during the audit with the message "...". iOS 9.3 failure of verification because you are no longer connected to the Internet"even if the phone is connected.

  Greetings, Installation of iOS 9.3 to my iPhone 4S (model MD234X/A with iOS 9.2.1 (13D15)) fails when checking with the message "...". iOS 9.3 failure of verification because you are no longer connected to the Internet"even if the phone is connected. as I can browse with Safari ok. I tried "Retry" several times, has waited several hours and "Try again" and turned the phone off and then on again then "Retry", all with the same problem! Help, please?

  Hi Bloggsj,

  Thank you for using communities Support from Apple.

  I see that you get an installation error when installing iOS 9.3 OTA.  I suggest that you try following the steps below to download the latest version of the update:

  If you have downloaded iOS 9.3, but you can not install it, you will need to download the update again. First of all, remove the update of your device:

  1. Go to settings > general > storage & use of iCloud. Under storage, click on storage management.
  2. Find iOS 9.3 in the list of applications.
  3. Press on iOS 9.3, then remove the update.

  Now you can go to settings > general > software update and download the latest iOS update.

  If you can't put day to iOS 9.3 on your iPhone 5s or earlier, iPad Air or an earlier version, or iPod touch

  Take care.

• I lost the internet connection, how do I reinstall

  I lost my internet connection to my Mini Ipad how can I reinstall

  Look for some troubleshooting steps based here.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

• Time Capsule has lost the Internet connection and DNS servers

  I use a Time Capsule for Time Machine via Ethernet backups for a couple of years, use it in mode bridge taking its Internet connection directly from my router and connected in turn by Ethernet to my iMac. (Most of the time that I also had wifi off on my iMac and took my Internet directly via the TC Ethernet connection.) A few months ago I upgraded to El Capitan, and the TC has lost its connection Internet (flashing yellow). A few days later I drove back to the Yosemite (for other reasons - Mail had gone mad) to restore a backup of the TC and everything was fine again for a few months. It may or may not be meaningful I plugged TC yesterday to new laptop for my wife to support for the first time, and this laptop is running El Capitan. Since then, the TC has once more lost its Internet connection and DNS settings and is stuck on flashing orange. By clicking on the 'Internet connection' status alert, tells me that the TC is not a valid IP address.

  

  I have reset the TC, repeatedly and reconfigured but all without success. After consulting the other discussions, I also tried giving the unit an alphanumeric name with no spaces & special characters and change the IPv6 "Link-local" configuration only, but this did not affect the result. And I updated the firmware for good measure. Then I unplugged overnight and carried out a full power cycle the steps recommended here, restart the router, TC and the computer (and performed a factory reset on the TC, while the router & computer was turned off). After doing that, the TC has become undetectable by AirPort Utility, until I have reset reconfigured once again, he and ended up in the same place.

  It may or may not be important to mention the following:

  1 when you set the TC after a reset, I repeatedly selected the option of adding to an existing network instead of create a network, but the installation wizard who ignored each time.

  2. in the installation each time, this point, I shows me the following, which seems to suggest that there is a problem but don't say so explicitly:

  

  I would be grateful for any advice.

  Weird how everything's going well for a few years and then crazy when you have something will change.

  El Capo adds some network problems more... but something could be fundamentally wrong with the installer.

  Your current configuration, it is apparently bridged but cannot get an IP address. The address 169.254 is give it since it's self generated.

  You need to do a manual installation. It simply means the Assistant is unable for any reason to be your network so start over and do it manually of misfortune (wow, or also possible misery, woah being where you are now!) to go...!

  1. I need to know what modem you are connected. Make and model please?

  2. the most important. What is the main router on your network or a modem?

  I gave the edge to make manual settings a few times. Somehow my instructions for Yosemite/El Capo got lost... I'll try and hunt down them. In the meantime, the basic method remains the same.

  https://discussions.Apple.com/thread/6509420

  It is not so difficult... You just know where you're going before you start.

  Airtport Utility cannot find airport Time Capsule on one of my Macs 2009

• my cell phone charger get more heat

  If I plugged in my cell phone charger, within 30 minutes, his most heaten... is there a problem?

  Ask the manufacturer of the computer support Office.

• I lost all internet connections

  original title; I lost all internet connections and all attempts to repair did not do what I do?

  I lost all internet connections.  I tried all to solve the problem, but without success.  Is it at a certain level of the code that I should bring in a professional setting?

  Hello

  1. what attempts to repair did you try?
  2. don't you make changes to the computer before the show?
  3. What is the accurate and complete error message you get?
  4 are you using wired or Wi - Fi?

  Method 1
  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2
  I suggest you try the steps from the following link:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://support.microsoft.com/kb/322756

  Additional information:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095

  How to set up a connection to the Internet in Windows XP Professional
  http://support.Microsoft.com/kb/305549