I lost my charger after 48 hours to get my TPT, FML

Similar Questions

• Satellite L650 - 18 c - 0% charged after 2 hours battery

  Hi all

  I have a brand new (got three hours ago) L650 - 18 c, which does not seem to load correctly. When I hoover my mouse over the battery icon that it said that AC is connected and load but the battery status is always 0% and it is bound for at least 2 hours now. He shows no sign of support either.

  Does anyone have any advice or ideas for what is the cause and how to fix it?

  Thank you

  Hi been,.

  In your case I'd wait a bit more. I mean this new book of s you have only several hours and this could take some time until the battery is fully charged.

  In your case I would also turn the computer off and wait until the LED battery icon change color and show you a completely charged battery.

• BSOD after 1 hour of computer use

  Recently, I've been doing the dreaded blue screen of death on my computer. I use XP SP2 Edition.

  It occurs usually after 1 hour of use on the computer, a message appears and it restarted the system has recovered from a serious error by saying so please inform microsoft this problem. A log of this error was created.
  What can I do?
  Help!

  Generally?  N °

  Of course - you may lose files with this question - so everything is possible.  ;-)

  That's why everyone who works with computers always harps on 'backups backups backups'--> after all, you have the opportunity to go back and get something that has been lost destructively in other aspects of life again to the * exact * same State?

  Service Pack 3 (SP3) was released more than three years ago: April 21, 2008.  Support for Windows XP without SP3 ended July 13, 2010.  If you download the SP3 installed, you will get some other updates that you really need - maybe 90 + of them.

  It's probably best you cleaning the computer some before attempting an installation of service pack 3.  Time - this will take, but in the end, you should end up with a much more stable and secure system - faster than ever possible.

  In the order shown, do not jump...

  First of all - download, install, operate and put to update and then run a full scan of the system with the following two (one at a time, reboot in-between):

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  After you perform a full scan with one then the other and remove anything they have all two are completely, you can uninstall these products, if you wish.  This initiative will allow to check there is no malware floating around your system which could cause problems.  If you ask - no, Norton probably does not protect you from what these applications can find.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you will be * not * do the aggressive version):
  How to reset the Windows Update components?

  Reset.

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Reset.

  Download Windows XP SP3 and save it to your desktop.

  Double-click on the downloaded file and follow the prompts to get SP3 installed.

  Your question may or may not be resolved after all that cleaning - such that it could even be hardware related.  Assuming that it is a desktop computer, when was the last time you picked up the machine off, bought a few cans of compressed air and opens the case and the breath in the dust?

• Why close and restart after 1 hour, while I am still connected to my computer?

  My computer restarts automatically after an hour and I lose and have to reconnect!  Help! Don't know what to do!  Have windows Vista Home premium. Never had this problem before, until now!

  Hello

  Check the Task Scheduler to see if you have anything put out there.

  http://www.Vistax64.com/tutorials/132903-Task-Scheduler-create-task.html

  ---------------------------------------------------------------------

  Could be linked to the heat, make sure that the computer has adequate ventilation, maybe use a small fan to
  Add air flow. On a PC, the cards, the memory and the cable (both ends) will need to be reinstalled.
  Remove all power and remove and replace those, don't do not just tight. Can't do that on a good laptop.
  Also check the power supply Plan of Advanced Options to make sure there aren't some parameters here that cause
  power off - Control Panel - Power Options.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------------------------

  Check with this utility, just in case there is a situation of blue screen.

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  accidents and displays the information about all crashes in one table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• new battery 0% after 10 hours of "load".

  Hey guys,.

  After coming back from vacation, I found my laptop x201i 3 weeks totally discharged. I have pluged it overnight adapter (ntbk turned off) and found in the same condition in the morning.

  Know it: "battery was completely discharged and must be charged. "Do take 10 hours or more.

  States power management tools >

  Battery status: GOOD

  status: recharge

  remaining percentage: 0%

  validation load time: -.

  remaining capacity: 0 Wh

  full load: 57,54 Wh

  Current situation: 0.0 has

  Voltage: 8.4 V

  Wattage: -.

  30 c temp

  number of cycle 25

  etc.

  can you please tell me what to do next? Recover? Wait 10 more hours with operating system?

  Thank you

  M

  If, it does not load completely after 10 hours, so you may need to get the battery exchanged under warranty.

  P.S. as a note of caution do not completely draining your battery, you must set the laptop to turn off automatically at the level of 5% battery. A deep discharge could kill the battery (which may be what is happening in your battery, in which case an externalb battery charger is necessary to revive the battery).

• When you try to FolderLink via Box, I get a confirmation message that the file is downloaded, but nothing happens and after an hour it is still downloading.

  When you try to FolderLink via Box, I get a confirmation message that downloads the file weeding, but the boy until the wheel turns and turns and after an hour or two it is still downloading. At this point I give up. I can download OK directly to their Web site box. He used to work a few months ago. I'm on Thunderbird V 38.2.0

  Instead, you can use Dropbox as FolderLink provider.
  Install this add-on.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/dropbox-for-FileLink/

• My iPod is dead for a few months and I put it in charge about an hour ago and nothing has changed. Can anyone help?

  So I got my iPod took me months ago, and I finally came back today. but I put it in charge there an hour and a half, and nothing will happen.

  This is the forum of the iPhone.

  You can try a recovery mode, but it could be the battery.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple...

• Gen AppleTV turns off after an hour

  My appletv gen 4 out of the box - off after an hour

  even if pandora streaming is active.

  There are settings for automatic stop that

  determines stop. I discovered after a lot of

  trial and error to determine the cause of this.

  but I ask - why the apple factory located it as one

  by default? how boring it was... you have no idea.

  That drive us crazy for a few days trying to

  determine what happened

  Apple - what u thought?

  Hi, we you streaming pandora on ATV? Or were you AirPlaying it to another device? If it's the last audio AirPlay is regarded as a process in the background, as readers of music on iOS. Thus, it is not override settings screen of sleep and sleep. The solution is to simply move these parameters out of the way.

  Furthermore, you're not talking Apple here, this is a user forum. To suggest improvements to Apple, try https://www.apple.com/feedback/appletv.html

• I do not want my deleted messages automatically removed after 20 hours. I'd rather remove my deleted messages that I choose.

  All my deleted emails disappear after 20 hours after their removal by me. I want to access my emails deleted and that manually remove as I wish. Can't seem to locate a location to choose this option?

  Thank you

  Just as keeping food remains you want later in the trash, keeping the e-mail that you want to keep in the trash folder is not a good idea.
  I suggest you create a new folder for this purpose and use it instead of the trash folder. As you can see, you don't have complete control over the operation of the trash.

• GarageBand 10.1.2 to stop recording after 2 hours

  Hi all

  We use Garageband to record longer sessions. Real, we have the problem, that Garageband continues to record exactly after 2 hours and 15 minutes.
  We tried 6 times and it was always the same. There is enough free space on the disk (SSD) and he quickly enough (MacBook Pro with i7/16 GB RAM).

  You can start immediately after he stopped without registration issue.

  We use multitrack recording with 3 pickups.

  No idea why Garageband to stop recording after the same time?

  Thanks for your comments or ideas to solve this problem.

  It depends on the number of measures. Recording will stop after 9998 measures. If the tempo is high, the length of the record is shorten the with a slower tempo.

  Take a look at this page of bullets & OS: http://www.bulletsandbones.com/GB/FAQPages/RecordLength.html

  Another limit is the limit of file size of 4 GB for AIFF files, but you would not have reached this limit with only two hours of recording.

• After 24 hours my second episode of my Podcast still does not appear in the store even if it shows to subscribers. Should I be worried?

  Hello!

  I recently published my podcast and my podcast and first episode both published to the store without any problem.  However, I posted my second podcast to my RSS feed yesterday and although he shows to my subscribers, it has not yet posted to the store after 24 hours. I updated my feed with Itunes and validation to check for errors, and everything seems to go well on my end.  Should I be concerned about or will I be impatient?

  Thank you!

  When you add a new episode to your stream and download it, it immediately appears for subscribers because their iTunes application reads the stream directly and the store is not involved.

  However, due to the multiplicity of the podcasts in the store (in thousands) the store caches the flow and it checks updates periodically. For this reason, there are usually 1-2 days for new episodes to appear in the store: sometimes it can be lower, and sometimes the whole process seems stuck and it may take several days.

  24 hours is a bit early to be worrying - it will be available for subscribers, it must appear in the store to another day or two. If it doesn't, go to Podcasts Connect, log in, choose your podcast and click 'Refresh Feed'. Give it time - the store can take a day or two to update. If that does not work, contact support and ask for a re-indexing: who can solve it. Go to https://itunespartner.apple.com/en/podcasts/overview and click on the link "Contact us" at the bottom of the page.

• My internet connection is lost at home after a few minutes. I re - turn on the wifi disabled, ten and it works again for a few minutes and then repeats. It works fine everywhere else?

  Relatively new MacBook OSX El Cap 11.4

  My internet connection is lost at home after a few minutes. I stop the wifi, then turn it back on and it works again for a few minutes and then repeats. It works fine everywhere else?

  Please see recommended settings of WiFi routers and access Apple points.

  Despite these recommendations, some routers will work better with the latest Mac models if you turn the radio 2.4 GHz mode in settings and only use the 5 GHz. Note, however, that very old devices Apple and some third-party devices can then not connect at all.

  Some third party routers have advanced that you may need to change the settings:

  The encryption algorithm must be AES.

  The group key interval must be 3200.

  I can't give you specific instructions on how to change these settings, because all routers are different. Refer to the documentation for the provider.

• I bought a new iPhone 6 s more and told me to load for a long time I did let him charge for 25 hours. Is that going to affect my battery life and what happens if I use it immediately?

  I have a new iPhone, and told me to let it load for a long time. I let it charge for 25 hours. This can affect my life of bacteria? And what happens if I don't use the phone immediately?

  Not at all, you can leave it plugged into the power supply, and it won't hurt the battery. However I am not leaving the phone in a State discharged for a long time. That can hurt so when he approaches zero the load soon.

  This user tip can help: when to charge your iPhone or iPad

• OS stops after an hour - is - it a solution?

  No matter what I do, OS X (El Capitan) stops after one hour of inactivity. I tried everything in the 'Préférences' window, nothing will do. Anyone know how to solve the problem?

  to do this

  Reset the management system (SCM) controller on your Mac - Apple Support

• Will I be charged after the free 3 month trial?

  Will I be charged after the free 3-month trial of apple's music?

  Yes