Lost power 'high performance' profile on the meeting place 8 pro

I only see the option 'Balanced '. I remember when I had first tablet, I had two options... one for balanced and another for performance.

How can I return these options? At the very least, that someone can point out their profile for their meeting places 8 pro settings?

Also, I see no popup 'low battery'... the tablet will shut down without any warning when the battery is low.
Thanks in advance.

That has something to do with the sleep settings connected / configuration Dell made on these units. It is the same for versions place 11 MS Pro. units of vPro are different because no standby connected supports.
If you turn off the connected Eve all Windows power plans are displayed and all the advanced features of power are available.

Use the command Regedit and change the following:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power
Change the value for the key CsEnabled from 1 to 0 and reboot.

1 means connected off standby active and 0.
Try it and see if it solves your problem.

BTW: by disabling the connected standby battery also will show the time remaining not only the percentage of battery life. :-)

Tags: Dell Devices

Similar Questions

  • Performance profile and the memory of a simple program

    I'm trying to find the program execution time using the tools-> profile-> performance and memeory to the simple add function.

    in my case, no matter how many times the loop runs (1 or 10,000), the given time is 15625. Is there a reason for this particular number?

    Thank you.

    Hi Julie,.

    15.625ms is the usual resolution when measuring time on Windows before WinVista (XP and above). Maybe that's what you see?

  • How to recover photos deleted from the meeting place 8?

    The Tablet is 16 g and upgraded to Android 5.1. I was cleaning up the files and folders due to the short storage warning. However, I just deleted several photos and videos by mistake and now I need to recover. Did anyone here know how to deal with this?

    rellacomb

    The Tablet is 16 g and upgraded to Android 5.1. I was cleaning up the files and folders due to the short storage warning. However, I just deleted several photos and videos by mistake and now I need to recover. Did anyone here know how to deal with this?

    If you have saved your photos on memory card, then you can try some recovery programs data free to scan and recover.

    If your photos have been recorded on the internal memory, I think they are gone forever, unless you try to professional data recovery.

    This is the guide: How to recover pictures deleted on Android

    Hope it works.

  • HBO go App on the meeting place 8 Android does not

    Can access account but not play any actual full contained or even previews.  It seems to be a problem of compatibility with the player HBO and the tablet. Anyone have any ideas on why?

    Upgrade to 4.4. 2 and HBO go works very well on my 8 3830 venue

  • (Redirected) Blocking of pornographic videos on the meeting place 8

    Somewhere, my children were able to access * videos on our site 8. I was able to remove them but would like to block this kind of thing altogether. What can I do?

    Best of this post in the Forum Mobile-devices here:

    http://en.community.Dell.com/support-forums/mobile-devices/

    Bev.

  • Missing features on the meeting place 8 Android

    I held my 8 for a week now. Seems they took a bit of functionality. Probably to justify the low price.

    -No multi user option.

    -No shortcuts app lock screen (it has no lock screen widget) there is an icon at the bottom of the lock screen, but the only icon she is the icon of the application Google instant. I can't find anywhere in parameters to add other applications to the lock screen to unlock the feature.

    -camera has extremely limited adjustments.

    Any other important?

    I just the 4.3 update on my Dell 8 place and they added the multi user option.  Still no luck screen shortcuts app however.  I guess you can always download an app for that.  Check the coverage that it's pretty cool.

  • How to get pictures on the meeting place 8

    I just got my Tablet coming Pro 8 with Windows 8.1. Is someone can you please tell me how I can copy photos from my office for this Tablet? I do not have Wifi at home, so I need a way to do that requires no Wifi.

    Incidentally: If you require a USB OTG cable/adapter immediately, likely a local of the smartphone/tablet/computer store will have one for sale. (IMHO, the DV8P should come with this accessory first.) And another possibility, Best Buy and elsewhere: a flash drive that has a "regular" at one end computer USB connector and a USB OTG on the other - micro USB connector connect to your computer, turn your content to the flash drive, disconnect, then connect the flash drive to your DV8P using the other end and transfer the content on your tablet. http://www.BestBuy.com/site/PNY-duo-link-OTG-16GB-USB-2-0-micro-USB-flash-drive-black-blue/6049005.p?ID=1219184620331&skuId=6049005&St=USB%20otg%20cable&CP=1&LP=1

  • New meeting place 8 Pro 3000 (2014) - WiFi VERY slow speed

    Hello, I hope that someone here had the same problem and it fixed or at least knows the answer.

    First of all, the new V8P3K can only connect on the 2.4 Ghz band?  There 5 GHz radio?

    Second, I noticed that any device on the 5 GHz band is close to 100 MB speed, that I pay.  What that this either on the tape of the 2.4 GHz (this tablet) struggles to reach speeds of 3-4 MB down and 6 MB speed (band of 2.4 Ghz tested on other devices with the same results).

    Then...  Should I get an evil router?  Tests are carried out within 20 feet of the router, direct line of sight.  I live in a Condo, so I wonder if I just have too much interference.  Is there a recommended channel?  or should I buy a new AC routers?

    Should how fast I expect on this Tablet?

    Thanks for any idea that you can provide.

    Answered my question about the best speed of my router.

    The usual advice is that channels 1, 6 or 11 are the most effective channels on routers with a 2.4 Ghz channel. It is absolutely not in a busy housing building.  Too much overlap I think.

    Channels 4,5,7 and 8 were all get Mb speed 30 +, I was expecting.

    I guess we don't have a radio to 5 GHz on this tablet...

  • Malfunction A7000 camera in meeting places

    All using the outputs on the camera for a video fuzzy and uncertain in landscape (front and rear) with a yellow and Green Strip on top. But this only occurs when using the meeting places and that too in fashion landscape. The person at the other end comes to see this kind of blurry video on my phone I see no problem with my own video or video of the other person. Because Hangouts is system application in this phone, I can not uninstall it and reinstall to fix this.

    Free OTA update.

    Problem solved through Version S142 and above.

  • Meeting place for Dell 8 3840 Applications keep crashing

    HI I had place Dell 8 3840 (new model) but I have a problem of application will crash everytime when I used.

    Specifically the Google Chrome browser, I just can't browse any Web site using the chrome browser. some site I opened there keeps crashing all the time. Several times I reset the Tablet, erase browsing data everything. But the problem could not be solved.

    Please help if you know how to solve the browser crashing the question on the meeting place 8 3840.

    Thank you

    I will never buy a new Dell product - firstly, technical support said that there is not only the amount of RAM (sharp) left after loading the OS, which means that if you have several tabs open in a browser, it will run out of memory. I found this point until after the use of the Tablet more than 30 days (49 to be exact) and when I tried to return, they said thanks for your efforts trying to solve this problem, but now that you're beyond the window of 30 days return, too bad - we can send you to the technical support. I tried to climb and they said the same thing - they don't care my or your company, or what is right.

    I / we never will only buy Dell products-our Organization eng and sales will go with someone else who is more concerned about the customer satisfaction.

  • After the system recovery running following a power outage, my user profile is lost. Unfortunately, he is also the administrator account. How to retrieve the profile or create a new?

    After the system recovery running following a power outage, my user profile is lost.  Unfortunately, he is also the administrator account.  How to retrieve the profile or create a new?

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    See you soon.

    Mick Murphy - Microsoft partner

  • Computer portable gel while in the cradle (after lost power)


    Hello
    You must update the bios http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-68451

    Version 7LETB9WW (2.19 - 1, 08)

    • (New) Support for ICH8 revision B2.
    • (New) Support for Intel AMT engine management region Firmware Update Utility version 2.6.4.1034 (or higher).
    • (Fix) The error, "0191 system security-Invalid remote change requested." can occur in the market.
    • (Fix) Some CardBus and IEEE 1394 devices can slow performance.

    Version 7LETB8WW (2.18 - 1, 08)

    • (New) Improved security features.

    Version 7LETB7WW (2.17 - 1, 08)

    • (Fix) The computer may hang while formatting disk ATA CardBus on Windows Vista 64 - bit SP1.
    • (Fix) The resolution of the external display screen attached to the docking via an analog display port will change during the operation of the dock/undock (NVIDIA graphics chip models only).
      • (Note) Install the NVIDIA display driver version 6.14.11.7471 or higher.

    Version 7LETB4WW (2.14 - 1, 08)

    • (New) Processor microcode updates.
    • (New) Update Intel memory reference Code.
    • (New) Update of Intel AMT 2.6 engine management region Firmware (models with Intel AMT 2.6 only function).
    • (New) Support for order of initialization of SSD (Solid State Drive).
    • (Fix) Startup error occurs during the initialization of the Intel ICH8M SATA.
    • (Fix) The 2100 (boot from hard drive 0 error) error code is displayed only occasionally after "Default Setup" is done in the BIOS configuration utility.
    • (Fix) The boot sequence is different from that provided for in the case of wake on LAN (WOL).
    • (Fix) Data memory can get scrambled during the startup of the system or out of standby/hibernation mode/power (models with Intel AMT 2.6 function only).

    Version 7LETB0WW (2.10 - 1, 08)

    • (New) Processor microcode updates.
    • (New) Added the new option of BIOS Setup to avoid blocking of the system even if the AC adapter is removed from the ThinkPad Advanced Mini Dock while the computer is attached to it.
      • How to activate: Configure Legacy devices on cradle Docking Station of Config ' Disabled' option in the BIOS Setup menu.
      • Note: A serial and a parallel port on the mini Dock will be disabled with this configuration

    Version 7LETA9WW (2.09 - 1, 08)

    • (Fix) Looks like a block of the system after continuous Fn - F7 knock on BIOS Setup or BACK. CBS could not handle many interruptions.

    Version 7LETA7WW (2.07 - 1, 08)

    • (New) Added new error code 1830 to indicate that only one card MEMORY is not installed in the location memory 0. Solution for error code: with only one card MEMORY, install the DIMM in the slot 0 memory (a different location of the consuming).
    • (Fix) Unexpected interruptions of the USB controller may occur.
    • (Fix) The system with the NVIDIA graphics chip may crash.

    Version 7LET56WW (1, 26 - 1.06)

    • (New) (Only for the models of Intel video) A design change that the screen is set to extended desktop mode, with an external display and the option "When I close the lid of my portable computer" in power options is set to "Do nothing", and when the cover is closed;

      • (Old) Extended display mode is cancelled and the video output is passed to the external display only, so the icons on the desktop will be moved.
      • (New) The extended display mode is kept and video output is not set, so the desktop icons are not moved.
    • (New) Improved function to capture the configuration information of the BIOS on the computer of the Capture/playback settings BIOS utility.
    • (Fix) The data of the hard disk transfer rate is slow in SATA AHCI mode.
    • (Fix) The computer may hang at the market, if the configuration of the device is changed in the BIOS Setup immediately after the resumption of the normal functioning of the hibernation mode.
    • (Fix) An error may occur in the market after settings BIOS ThinkPad for Windows is running and then the computer goes into hibernation mode.
    • (Fix) WMIMGMT. MSC fails to read the properties on Windows 2000.
    • (Fix) (ThinkPad T61/T61p only) Volume buttons and mute on the keyboard do not work under Linux.
    • (Fix) (ThinkPad R61 only) Menu of Intel AMT removed from the BIOS Setup: The Intel AMT menu is displayed in BIOS Setup on some models, although the Intel AMT functionality is not supported.

    Version 7LET51WW (1.22 - 1.06)

    • (New) Optimize the Quadro NVS 140 M models nVIDIA graphics card power management feature.
    • (Fix) Resume from hibernation operation may fail with Intel Turbo Memory on Windows Vista.
    • (Fix) Turn on the password may appear even though fingerprint authentication has been matched with the power on the calendar.

    Version 7LET51WW (1.21 - 1.06)

    • (Fix) Incorrect screen resolution can be configured when the system is docked on the docking station.

    Version 7LET44WW (1, 14 - 1.06)

    • (New) Additional OS supports the nVIDIA Quadro NVS 140 M for models.
    • (Fix) Unexpected display or the modes can be selected with dock on Windows Vista
    • (Fix) Resume operation may fail on nVIDIA Quadro NVS 140 M models.
    • (Fix) System performance may become very low if the hard drive (Serial ATA controller mode) is set to AHCI.

    Version 7LET40WW (1.10 - 1.06)

    • (New) Support for the new ThinkPad R61/T61 models.

    Version 7LET39WW (1.09 to 1.05)

    • (New) Support for ThinkPad T61 14.1 inch screen normal models.
    • (New) Support for ThinkPad T61 15.4 inch widescreen models.
    • (Fix) The screen display mode setting can mismatch on Windows XP.

    Version 7LET37WW (1.07 to 1.04)

    • (Fix) TrackPoint does not work after the undocking of the PS/2 mouse with docking station.

    Version 7LET35WW (1.07) (New) Initial version for the ThinkPad T61 and R61 14.1 inch widescreen models without IEEE 1394

  • Would be vsphere cluster possible to become the compute cluster high performance?

    Hi all

    Now what I want to do use the animation (maya etc, realflow) 3D software to render images of superior quality.
    Like compute cluster high performance.
    I already have 2 building hosts, vCenter Server, created definition 1 cluster that was including 2 guests, 1 VM created and installed OS.
    When I turn the test file, the result is the same as when I used the only host of the to do.
    Is it impossible or anything like that, that I forgot to do?

    System virtualization is a way to partition your host resources.

    Not a way to group the power to multiple hosts (for a single virtual machine).

    For this you should use, for example, HPC clusters.

    André

  • HP 15-g018dx Notebook PC: HP 15-g018dx Notebook PC can upgrade my graphics card to give me a high performance on the game?

    Serial number: [personal information deleted]

    Model: 15-g018dx

    Product number: J5T41UA #ABA

    I tried to figure out if I can update my graphics card and I was wondering if I could, and what graphics card would be better for my laptop for high performance on the game.

    Hello

    No, it uses the CPU/processor AMD Quad-Core APU A6-6310 2.4/1.8GHz:

    http://support.HP.com/au-en/document/c04368180

    You will also need to change the motherboard and it is a very expensive upgrade.

    Kind regards.

  • I lost the user's profile after the execution of an update of the Microsoft Vista

    After an update from microsoft on December 18, my user profile on the computer has been lost.

    It says there was an error loading the user's profile, and that any changes made to the computer now will be lost once the computer is offline.
    For me it of more my ruined A £499 of the cell value and not good for me.

    I'm not a computer genius and don't know what I'm doing.

    Can someone tell me please know what Microsofts update to vista did and how to fix it please.

    > Can someone please advise me as to what Microsoft s for vista update did and how to fix it please.

    I think THAT the guys at Microsoft would be able to say what did the Vista update
    To be honest I m running Vista updates too, but my computer and all my profiles are not affected

    However, what you could do is to put the OS up to this early time using Vista's system restore.
    Perhaps this will help you resolve the issue.

    If not, then maybe you can manually configure your user profile

Maybe you are looking for