lost the disk, you will need to reinstall the program.

Similar Questions

• Lost the disk, you will need to reinstall

  Hello

  I am aware that I have to download CS5 trial versions, but as soon as I do I'll be able to use my serial number of the product I bought to activate it? No matter that they have already been used for my initial activation? Or I have to disable my software before reinstalling?

  Also, I want to reinstall on Mavericks OS X at some point. This will be possible with CS5?

  Your serial number from your purchase of CS5 will work to turn a trial into a fully active version.

  You are allowed to have the software enabled on both machines, the restriction being that it can only be used on one of the machines at any time.  If you don't plan to use the software on the original machine, it is better to disable so that you have an activation available if you need it.

• You will need to reinstall Windows 7, but need clarification on a few issues before the reinstallation.

  Hi everyone :)

  I have a Dell Inspiron 15R, and 2 years since I got it and due to the excessive overuse, its performance has become extremely poor. The registry is riddled with problems, and I think it's time for a reboot.

  I don't really know where the drive is, but I should be able to find it.

  First of all, I have a lot of shows and movies. Somewhere around 1.5 to of them. I also have 120 GB of programs. It's clearly too heavy to download everything at once, so I don't want to lose.

  With the program, can I transfer them to an external hard drive and then put everyone back in the program on my HARD drive wiped files and re - run the .exe file?

  Would you recommend buying an SSD and the replacement of my current HARD drive with it?

  Can I use the disk to reset everything on Windows without losing my files? This will fix the registry problem?

  Thank you

  Rowan

  
  Original title: I think to restart my computer. Can someone please answer a few questions that I have about it?

  Hi everyone :)

  I have a Dell Inspiron 15R, and 2 years since I got it and due to the excessive overuse, its performance has become extremely poor. The registry is riddled with problems, and I think it's time for a reboot.

  I don't really know where the drive is, but I should be able to find it.

  First of all, I have a lot of shows and movies. Somewhere around 1.5 to of them. I also have 120 GB of programs. It's clearly too heavy to download everything at once, so I don't want to lose.

  With the program, can I transfer them to an external hard drive and then put everyone back in the program on my HARD drive wiped files and re - run the .exe file?

  You cannot actually backup installed programs and bring them back, but you can save the actual installation files (.exe, configuration files) and use them to reinstall the programs. So it's a good idea to save them.

  Would you recommend buying an SSD and the replacement of my current HARD drive with it?

  Certainly if you can afford, its faster, makes your programs and Windows start faster.

  Can I use the disk to reset everything on Windows without losing my files? This will fix the registry problem?

  You can perform a custom installation that move your old installation in the folder Windows.old, where you can retrieve your personal files. I still recommend you back up your files separately but and restore them.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

  Thank you

  Rowan

  Reinstalling Windows 7.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  or

  F8 when starting the unit

  Select the option to repair your computer

• hardrive crashed; lost the restore disc, you will need to reinstall XP hard drive with serial No.

  My hardrive crashed and I lost everything.  I can't find my restore disk to install my operating system.  The computer is registered.  Can I have a free download of XP when giving you the serial number of the processor?

  N ° please see: How to replace lost, broken or lack of Microsoft software Carey Frisch

• I can't update my CS5 because I loaded Yosemite on my iMac. you will need to update the files camera raw.

  I can't update my CS5 because I loaded Yosemite on my iMac.  You will need to update the raw files.

  Please try and reinstall CS5: stalling-yosemite-version-10-10-on-imac http://feedback.photoshop.com/photoshop_family/topics/problems-with-photoshop-cs5-after-in it seems that the update of the OS is corrupt PS CS5 if it was installed before the upgrade to Yosemite. Let me know if that will fix it for you.

  With the permission of Jeffrey Tranberry

• You will need to connect the battery, but lapptop now sign showing that the battery is not connected, so does not load.

  You will need to connect the battery. until recently, all ok.  never use the laptop as a mobile, always on the wireless, but lapptop shows now sign that the battery is not connected so does not load.

  I have a laptop which, so far, is always connected wireless when it is in use. I want to take a vacation, and notice a signal arrives that the battery is not connected and therefore does not load.  This has happened recently, although the battery never showed a 100% charge. can someone tell me how to connect the battery please.

  Check that the battery is correctly installed. If it is then the problem is that the battery is exhausted, so you should buy a new battery.

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• You will need to reverse the left and right audio channels, because I would like to avoid too cables around the living room and the right sound.

  You will need to reverse the left and right audio channels, because I would like to avoid too cables around the living room and the right sound.

  tried in SOUND > Speakers > CONFIGURE it on by clicking on the right left speaker sound time and vice versa.

  Hey DiegoWO,

  There is not currently an option within the OS to achieve.
  However, your drivers audio pourrait have a built-in effect that allows you to reverse the stereo sound. If you do not see a separate application to manage your sound, you will need to visit the website of the manufacturer of your sound card and install the latest drivers.

• You will need to download and install on my new computer the Adobe Acrobat XI Pro student and Teacher Edition. How can I download it?

  You will need to download and install on my new computer the Adobe Acrobat XI Pro student and Teacher Edition. How can I download it?

  kglad links in response to #1 here can help https://forums.adobe.com/thread/2017859

• you will need to update my version no CC in lightroom (the last update, 6.2 I think). where can I find this CC download no

  you will need to update my version no CC in lightroom (the last update, 6.2 I think).

  The latest version is 6.3, go to the Help Menu and there are updates... choose.

• After getting a new mac mini, all of my adobe products worked except photoshop. I get this message. Check with the developer to ensure that Adobe Photoshop CS5.1 works with this version of Mac OS X. You may need to reinstall the application. Don't forget

  After getting a new mac mini, all of my adobe products worked except photoshop. I get this message. Check with the developer to ensure that Adobe Photoshop CS5.1 works with this version of Mac OS X. You may need to reinstall the application. Don't forget to install the updates that are available for the application and OS X. I bought it originally, but do not know were my installers are. Can I get a new installer?

  1st, CS5 is 4 + years old so you MAY have problems with the latest Apple operating system

  Yosemite sometimes has problems, often related to the 'default' permissions that need to be changed

  -solution https://forums.adobe.com/thread/1689788 of a person

  - and a Java update https://forums.adobe.com/thread/1507936

  -Update may break things https://forums.adobe.com/thread/1772260

  2nd, try previous versions http://www.adobe.com/downloads/other-downloads.html

• You will need to activate CS2 on the second computer, but no longer have the serial number.  How?

  You will need to activate CS2 on the second computer, but no longer have the serial number because this copy was a replacement for original who has trashed when the hard drive crashed.  How can I do this?

  Error message: activation not available server | CS2, Acrobat 7, pass a hearing 3

  Only works on Windows or old Mac PowerPC. Modern MacIntel cannot run CS2.

• You will need to disable the first 10 items?

  I have a new laptop and downloaded my first items 10 and Photoshop. However, I got a message when I opened the first telling me that I needed to disable it on another computer. But I can't figure out how to turn off!

  In addition, I don't know if it's connected with my need to turn off or if it's just the computer, but I can't use one of the links in the menu to create on the old laptop, and I can't connect to my Adobe ID on either.

  Can someone help me?

  PS: If it's important, all of my new laptop runs on Windows 8 and the old man is 7.

  TsukiNaito1

  Adobe permits you to use your first items purchased 10 on only 2 of your computers serial number. If you want to put this on a 3rd computer serial number you will need to 'Disable' installation on PC 1 or 2 to get this serial number of first Elements 10 purchased on computer 3.

  The message you get on computer 3, you are saying that your first 10 items is on more than 2 of your computers already (computer 1 and 2) and you want to install it on another (the 3rd computer).

  So, where you have first Elements 10 installed?

  Go to one of these first Elements 10 computer configurations. Open first items 10 to its workspace. Go to help Menu/disable and click on disable for this. Close to there. At this point, you can

  a. leave the program installed but disabled on computer 1 or 2 as the case

  or

  b. Uninstall computer 1 or 2 as the case mya.

  Please see the newsletter and let us know if the above is clear and works for you.

  Thank you.

  RTA

• you will need to determine the end of the video.

  I need to know how when I arrived at the end of the video.  I seem to remember there is a new Flash 10 command that will allow you to know without having to track the total number of bytes used or time elapsed or anything complicated like that.  Does anyone know the command that I'm talking about?

  If you are using a component FLVPlayback instance, you can use the VideoEvent.COMPLETE event (that you will need to import).  If you use the netstream class, you can use the onPlayStatus event.

• Error initializing Java Runtime Environment.  You may need to reinstall Flash.

  ... It's really annoying.

  I work with adobe cs5. Recently, it started to not work. I have to restart again and again so that it can compile a swf properly. I'm trying so cs5.5. I get this error "error initializing Java Runtime Environment.  You may need to reinstall Flash. »

  So im like OK... This is useful...

  -Reinstall flash-

  "Error initializing Java Runtime Environment.  You may need to reinstall Flash. »

  ...

  -Reinstall java-

  -Reinstall flash-

  -Reinstall adobe flash cs5.5-

  "Error initializing Java Runtime Environment.  You may need to reinstall Flash. »

  ...

  -google-

  If I came across this post. Follow it exactly.

  "Error initializing Java Runtime Environment.  You may need to reinstall Flash. »

  ...

  I have change the thing in the file to Xmx1024M

  "Error initializing Java Runtime Environment.  You may need to reinstall Flash. »

  ...

  Just on the forums.

  What should I do now?

  I found a solution that works for me.

  Just delete the file jvm.ini under the location of the temporary folder. In windows, it would be under path.

  C:\Users\USERNAME\AppData\Local\Adobe\FLASH_VERSION\en_US\Configuration\ActionScript 3.0

  For example. C:\Users\admin\AppData\Local\Adobe\Flash CS6\en_US\Configuration\ActionScript 3.0

  As soon as you start the Flash, a defult jvm.ini will be created automatically, in this place and your flash works fine.

  Acutally the error comes because of the jvm.ini of corroupt file (cause too great values > 256 error displayed.) For example. Xmx1024m) that is created in setting up temporary forlders automatically during the Installation of Flash.

  Whenever Flash begins his search the file jvm.ini and let the maximum memory of initalized at FMV.