HP designjet 510 on NAS

Similar Questions

• Designjet 510: Designjet 510 starts printing, then everything stops and "blocks" no error messages...

  My normally reliable Designjet 510 suddenly started having problems printing: it starts to print my drawings, no problem, but it suddenly stops and just print head 'crashes' and no longer print.  He sometimes starts from the beginning of printing, he sometimes almost at the end of the drawing before it stops, but he can't seem to finish the print job.  The printer does not display an error message, it still shows that it is printing, but no matter how long I leave, it will not at the end of a drawing.   I'm on Microsoft Windows 10 - there was a hiccup when I upgraded Windows, but after reinstalling the printer driver, it seems to work again no problem.  I'm tearing my hair out (and lose large amounts of paper) trying to get anything to print!  Pointers would be welcome.

  Thank you.

  P.S. I posted this problem previously, then thought I had sorted by adjusting the settings of the printer, but she went back, and I am no closer to knowing why!

  How is the printer connected?

• HP plotter designjet 510 appears as ready in the control panel, but is not drawn. Plotter is shown connected to USB003. Any ideas?

  I am running windows vista 64-bit. I also have downlaoded and installed service pack 1 or 2 - I forgot. But now, even though I see the tracer in the control panel---> windows printer as "ready", I can't draw anything. The abacus is silent. When I click on the print status (the little icon on the bottom right of the screen), it displays the status of trace as error.

  Any ideas?

  Hi Moussa,.

  Thanks for posting your query in Microsoft Community.

  According to the description, you are facing problems with printing through HP Plotter DesignJet 510 and receive the status of tracing as error. To help you to propose measures to solve the problem, I would appreciate if you could answer the following question:

  Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can run the Microsoft Fixit article and check if that helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   

  Method 2: If the method above does not help then you can follow the steps in the HP tool specially for HP devices.

  Try the HP Print and Scan Doctor

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

  Alternatively, you can contact HP Support for help on the issue:

   

  HP support

  http://WWW8.HP.com/us/en/support-drivers.html

  Hope this information helps.

  Let us know if you encounter problems under Windows in the future. We will be happy to help you.

• HP Designjet 510 false jam

  I have this morning and started the fermentation.  But every piece of evidence that I try to print, I get the false paper jam.  I turn it off and on again, and it prints one.  Then when he starts the following, it does the same thing.

  Any help is greatly appreciated.

  It would be useful to mention some code the machine can be displayed when appears the indication of jam.  If it is a code of 86:01, is it possible that your rod of transport, stem stainless steel trolley slides is contaminated and must be cleaned and lubricated with a light machine oil.  The other thing that causes this code is if the thin coding Strip which also crosses the transport of the length of the drawing board may be dirty or lacks some of its retail brands, as is how transport knows where it is in the scanning process.  These two things are very widespread, as the belt that drives the transport begins to fall apart and not drive the truck correctly, but that one should be noticeable.

• Designjet 510 - print head not moving not

  Hello. I've been printing drawing A1 when suddenly, he stopped and told me paper is stuck. I followed the instructions to remove the paper and move on. The book was removed easily and unsigned of stuck.

  When I have on it, it shows message that cover not closed print head, but I couldn't check on it like the print head is parked at the far left of the printer.

  I reboot again, but he is stationed there for always with the same message appears.

  Any idea?

  Thank you.

  Hi again. Managed to solve the problem. Has changed her wear of the belt...

• HP Designjet 500 42: Old problem of driver update

  Hello

  I have HP Designjet 500 printer 42 in. And I can't update the old drivers. I downloaded new drivers drivers

  Installed new drivers and the printer connected to the computer. Installed printer itself. Driver version but check it shows in 6.08 (preferably printer-> subject) window.

  I deleted all drivers using pnputil.exe d Oem # .inf and printui/s/T2 orders. All the drivers of HP has been removed from

  C:\Windows\System32\DriverStore\FileRepository

  and

  C:\Windows\System32\spool\drivers\x64\3

  Installed new drivers (8.10) and pluged in the printer. Printer has been installed but with drivers 6.08. So I went to the "print management" as an administrator. Pressed on HP Designjet 500 42 by HP printer 'Manage sharing'-> "Advansed"-> "New driver"-> 'Disc' and in C:\Windows\System32\DriverStore\FileRepository I chose "dsgj510.inf_amd64_* *" folder and the dsgj510.inf file here. But could not find "HP Designjet 500 printer 42 in.". Here only:

  HP Designjet 500 42 + HPGL2 card; HP Designjet 500 plus 42; HP Designjet 500ps plus 42; HP Designjet 500PS42 + HPGL2 card; HP Designjet 510 42 inch printer and HP Designjet 510ps 42-inch printer.

  I tried to use HP Designjet 500 42 + HPGL2 card HP Designjet 500 plus 42 drivers. But printer would give an error message and do not print.

  With the help of the 6.08 driver version I can print from some software, but I need to print from AutoCAD. And AutoCAD gives me the error message "no: cannot use this configuration of tracer for one of the following reasons: the driver is not found, cannot find the device or the driver has a problem." No device has been substituted. "And I can't choose the HP designjet 500 printer in AutoCAD.

  It is a shared printer and other computers on the network have 8.10 drivers and can print from AutoCAD. Single computer, the printer is pluged cannot print because it driver 6.08.

  I found the problem.

  On the page under 10 64-bit windows this is only "HP Designjet 500 and 510 HP-GL/2 and HP RTL driver 64 bit" 8.10 drivers. And this driver is not HP Designjet 500 printer 42-inch drivers. But under 64-bit windows 8, here's two pilots. "Driver HP DesignJet 500 PCL3GUI 64-bit" 8.10 drivers and same as above. This file have drivers for HP Designjet 500 printer 42 inches and runs under windows 10.

  If HP support lazy to put all work them drivers under windows 10 for HP Designjet 500 printer.

• HP Designjet 500 42 "do not print

  Looking for help with my HP plotter. Recently, I replaced the service station and print transport. I also downloaded the driver (Driver HP DesignJet 500 PCL3GUI 32-bit) and firmware (series of printer HP Designjet 500, 510 and 800 Firmware Upgrade) to new pc XP from the original pc used for printing crashed. The printer displays indication normal and says ready for jobs however when I send a print to the printer it just shows treatment work and transport movements feeling left right at a few times, but the jobs do not print. Also, it seems to stay forever in this (suspended) mode and I have to power the printer off to return to the normal screen ready.

  What is a driver/firmware issue or hardware?

  If I try to print a configuration page it also does the same thing.

  Thanks in advance.

  Jacob

  It is a thin cable error. The ends of the cable have questions or it is not completely sitting in the cart. I guess the cable could be as bad.

• a cartridge 26 replace a cartridge 82 a design jet 510 does

  a cartridge 26 replace a cartridge 82 a design jet 510 does

  Hello

  Please check the packaging, the is a cof list compatible printers. In addition, depending on where you are, all I can see here is that they are not the same shape and size:

  26: http://www.cartridgesale.com.au/compatible-HP-26-51626aa-black-ink-cartridge-p-841.html#.UTT011eSmo8

  82: http://www.hottoner.com.au/82-Designjet-500-800-yellow-ink-62317.html

  Kind regards.

• Slow drive QNAP NAS

  Hello

  I mounted the SIN of QNAP (TS - 451, 4 x 3 TB WD RED, RAID-5) on network Giga ethernet (using unmanned giga ethernet switch hubs). However, the speed of file transfer is slow and he cuts every time.

  I use IMAC 27 "with the latest MAC updates.

  I tried to mount the drive smb/afs and its still slow in both types of mounting.

  Any suggestion please?

  Thank you.

  OS X does not support the NAS technology. You must contact the NAS developers for support on their product. The first thing I would recommend you do well that must ensure the NAS software that you have installed is designed to work with the version of Mac OS X installed. If not then check with the developers to see if they have updates.

  This means, at any time your account to update or upgrade the operating system on your computer, check with the NAS developers to ensure that they support this update before the update of the OS.

• Sierra and Photos: unable to load library of pictures located on a NAS

  I have a 300 GB photo library located on a NAS.

  No problem with El Capitan and Yosemite.

  With Sierra when I opened the Photos I had a spinning wheel and even after a night full, nothing happened (Finally, the NAS disconnected... but I think it's something Sierra... never happened before)

  Now, I am trying to get all the Masters folder within the library of Photos...

  I have the same problem. Cannot open the pictures library that is located on a Synology NAS. Finder (not answer)

• macOS Sierra broke such automount NAS when connecting

  Using a script, Automator action or via 'Elements User/Login' sharing NAS automount when the connection requires * manual * confirmation of username/password to succeed

  Not a big deal (just a bad and useless nuisance) on my MBP. But a real PITA on my headless Mac mini server

  It looks like this bug (unless it's a great novelty) is around since beta1! : rolleyes:

  I deleted all media, restarted Sierra and implemented everything is new. Nothing.

  Not good.

• ITunes does not work when I open a file of my QNAP NAS.

  When I try to open a file or card with Itunes my QNAP NAS via the finder and shared devices, so it does not open, or it opens very slowly. Can someone help me solve this problem? The connection between my mac pro book and my NAS is wireless.

  Friend

  What happens if you try to open one without iTunes? That has really nothing to do at all with iTunes?  If this isn't the case, then you would probably get a wider range of people experienced with problems of general network on a forum for you use the version of the system.

• iTunes Ripping from CD to NAS

  Hi there, apologies as I'm sure this has been answered in some form several times but I can't find too specific a question (s). I have a MacBook (OSX) and a DLINK NAS talk to one another. I would like to ship ripping my CD collection, so I have digital versions available, allowing me to use a number of services (iTunes, Sonos etc.), with files on the NAS itself.

  What setting should I before I start?

  1. Change iTunes to MP3 format extraction
  2. ITunes library update location on NAS where ripped files will be made available
  3. Configure iTunes to watch the entire where my audio files will be, or create a separate folder "library only" and somehow configure if it has a few shortcuts to real files?
  4. Anything else?

  In short, I want to make sure I'll keep that a copy of the file to save space as well assume that I need to extract the files directly on the NAS. Then iTunes media library should just look at these files, so there is no drop iTunes and double files?

  I have probably explains this very badly indeed but eager to make sure that I'm going on the right foot and make a beautiful torn library located on my NAS, but just once!

  Thanks in advance!

  Everyone likes the idea of SIN, Sonos, etc., but in reality, iTunes and NAS don't like each other and can cause unexpected problems. Not always, but when it happens, you'll be one very unhappy announcement back here.

  The format to which tear you depends on the size of the file to which you are ripping applications are you your other devices and to a certain extent.  For speeds of 128 k or less get you better quality of AAFC.

  If you continue to use the SIN, you can move the entire library to it.  Copy the entire folder iTunes from iTunes to the NAS, then launch iTunes while holding down the option/alt key and select the iTunes Library.itl file in the folder on the NAS.  The NAS will have to be awake and active before launching iTunes or iTunes will forget the location and you will need to reset it.

  From this moment the only things stored on your computer will be the backups of the iPhone and some files in iTunes preferences.

  Make sure that you keep backups of the library on the NAS.  We can one day you'll start things and discover all your track lists point to very different files and you will LOVE your backup at this stage because dealing with by other means will require 30 positions.

• Installation of iTunes, Synology NAS,

  I can get a good guide on how to use my 716 + NAS synology, to store all my music files, and when I open itunes on my iMac, MacBook air, or windows laptop or even when I use AppleTV, I can access this music (if it is not stored locally on my computer)?

  Also, I tried this in the past, but with itunes on my iMac to restart, it would never ride my share, so he always missed the location default library itunes (locally) and mess substance upward.

  I see also synology has an Itunes Server package, that would be a solution?

  Thank you

  First, be aware that there are no rare posts here on NAS problems with iTunes.  NAS is great conceptually, but in execution of problems that can occur with iTunes and have done so for more than a decade.  Everyone makes fingers to everyone, but the main thing is that you always run a risk of a library mutilated.  Better is to use a simple external drive and use the NAS for backup.

  I think the server package is pretending to be a shared library iTunes without having an active version of iTunes open at the time.  Have you read the manual or online for the NAS documentation? I don't have one and what I know is people post questions here.

  The reason why you had problems before is your SIN is going to sleep and not wake up before launching iTunes.  The same thing would happen even if you use a simple external hard drive.  If it doesn't happen at startup, you can try to put an alias to the iTunes on the server application, then an alias to this alias in your computer and start iTunes this way, not directly from the computer.

• Time Machine NAS RAID

  Goal: large, reliable Time Machine back-up.

  (No purpose: archiving.) I do that separately on optical carriers per year, double copies, which goes off site. I understand that optical media can degenerate over time - even if some are marketed as "of archive-quality" - and therefore based on a cloud of archiving is the way to go but for now he takes too much bandwidth and I'm worried about security. I recently got a burner external blu - ray: exceptional.)

  Question: can I use RAID for Time Machine if I connect by USB directly on my computer?

  Issue 1: reliability external drive. This has happened twice that I bought a property, brand, large external hard drive and was prematurely fail at a difficult time. My local computer guru said "it happens" and is "unpredictable" and just buy a new one, most won't. Or, for better quality, get a NAS - network attached storage that can be attached, they have the temperature control, mine is a RAID 2 discs, so there is that the degree of redundancy - but not, I learn, protect against a corrupt Time Machine backup and that can happen, or power increases (although it is on a high-tech power bar) , or theft, etc.

  Problem 2: using NAS, which I connected to a Terminal Airport Express via an Ethernet cable - if connected to the computer by WiFi - the Time Machine backup becomes a "sparsebundle" (set of files, in fact), encrypted file with password (?) drive access. However, this was work and I did a full restore of your data (no 'system') the other day with Migration Wizard when I got a new hard drive installed in my old iMac (also upgraded at the time of 10.9 to 10.11). It took over all night, but the wonder of wonders, it chugged along and finished and seems fine. (I have not checked tens of thousands of files individually!)

  (My SIN explicitly supports Time Machine, and I checked that box in the configuration of the SIN, and it seemed to work.) I didn't have to leave the mounted drive. Time Machine found hourly and used invisibly in the background.)

  Problem 3: I have rename my hard drives for some reason any and do not remember quite what its name was. I wonder if this is part of my problem (read more). But there is a method in Time Machine to 'Browse other discs of backup. " I was looking for a file that I kept outside my usual login "user" and so had not been returned when I used Migration Assistant for data recovery only.

  However, when I do this, then nothing is there. I've learned that sometimes, with an encrypted sparsebundle, wireless backup, you will have to let Time Machine sit for a few minutes before the back-ups start to appear, but now, with my new hard drive (with a new name) and the new version of the OS, there is simply nothing; just 'today' that shows only my current hard drive status. Obviously, there was something, or Migration Assistant wouldn't have worked, but during the inspection of the backup via Time Machine, the file seems to be here (whatever_my_computer - name_was.sparsebundle), but it is empty.

  If I just try to navigate in the Finder to the sparsebundle NAS Time Machine, I can find it but not to open it. Double click: nothing happens. It is not that I forgot to connection settings, this is what it do not ask me for them.

  This happened to me twice and the first time was the day after archiving (luck and good planning) and I thought that it is a kind suddenly lucky, but now it happened again.

  So, I tried a bit of searching and not found a clear answer to my question above. I do not see these links:

  TEM http://www.petemarovichimages.com/2013/11/24/Never-use-a-RAID-As-Your-Backup-sys.

  https://support.Apple.com/en-CA/HT201250

  https://discussions.Apple.com/thread/3837784?start=0 & tstart = 0

  https://discussions.Apple.com/thread/7448896?start=0 & tstart = 0

  https://discussions.Apple.com/thread/5849068?TSTART=0

  Of them, it seems that a NAS that has an explicit ability to Time Machine might work (mine did), but is not fully functional, not approved by Apple and is completely unpredictable. My limits are described above. (I work around them).

  However, moving forward: I have this RAID 2 discs sitting around, seemingly more reliable than a drive external non-temperature controlled, and I wonder about the connection by USB directly on my computer. What is the downside of this? That is my question. Who will 'normally' work as a Time Machine backup external drive?

  Another option is to get two large external hard drives and the value of Time Machine to switch between the two. I have not tried, but apparently it was possible for the last iterations little Mac OS X.

  I have important data that requires careful management.

  Thank you all,

  Charles

  I use a direct attached Drobo (it is a very easy to use RAID device).

  I've always had problems with Time Machine on the network, so I stopped using it in this way. I've never had problems with the TimeMachine and direct-attached storage.

  With the Drobo if a disk goes bad, I buy a replacement and hot it swap for the failed drive.