Lost with 1200 PLP: extremely slow.

I apologize if this post is a duplicate. I think I posted a few minutes ago, but I can't. I made a mistake or messages are moderated before being published?

In any case the problemis here: even if I'm not a professionist troubleshooting of energy lines, I'm in trouble with my new copula of PLP 1200 s. I had in the past the 14Mbps model and could earn 1.5 to 2.3 Mbps; I recently tested a model 500 and got 35 MB/s peak. Now, with the PAP 1200 I get 2 to 3 MB/s. It is unbelieveble... I'm not "really now what the problem would be." I will now check the firmware, but if anyone has a suggestion, it's really appreciated.

TIA

Simon

PS: the two 1200s are directly plugged into the switch in the wall.

Hi, sorry for the delay.

Two high-voltage lines are Netgear PLP 1200 s and are located in different rooms. I said something I did not know my electrician: I have a facility electric triple phase (380V - 10KW - it's a 500 m² House - the problem is here: power lines are under different phases). But as my father died and we do not need more power here thet, I asked the electricity provider local downgrade to - 6 KW - 220V single-phase. Of course, I could put two high-voltage lines in the same room and test but there is no hurry, I'll wait until the plant is demoted in single-phase.

TNX for your help.

Simon

Tags: Netgear

Similar Questions

  • Extremely slow performance with Radeon HD 7870

    Hello

    I use a number of Adobe programs on my new 64 bit system of Windows 8, with 16 GB of ram, a processor Intel Core 2.67 ghz i5 and AMD Radeon HD 7870 2 gig. All programs (including After Effects and Illustrator) work very well with the exception of Photoshop CS6 64 bits, which is extremely slow performance with GPU to use enabled in my preferences (Photoshop selects by default). If I disable the graphic processor use, this slowdown faints. If I change the Basic Design Mode, there might be a slightly detectable improvement during Normal and advanced, but it is still horribly slow. The refresh rate seems to be only a few frames per second. Everything is slow: brushes, zoom, panoramic, as well.

    I tried changing the settings I've seen suggested elsewhere: I went 2 level of Cache, history says 10 and the size of the tile to 128 k. No effect. Photoshop is currently the default using 60 percent of available ram. Efficiency has remained 100% overall of all my tests. In addition, this slow performance touched me from the moment that I installed Photoshop; It didn't arise after previous good performance. The problem exists regardless of the size or the number of documents that I opened. Performance is always terrible, even when I create a new blank canvas of 500 x 500 pixels and try a simple task like drawing with a brush.

    Photoshop is perfectly up to date, and so are my graphic drivers (Catalyst version 13.1). Any help would be greatly appreciated; yet performance is so bad in Photoshop it is unusable, graphic acceleration activated. Thanks in advance for the answer.

    Information on the system of Photoshop:

    Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00) x 64

    Operating system: Windows 8 64-bit

    Version: 6.2

    System architecture: Intel CPU Family: 6, model: 14, Stepping: 5 with MMX, entire SSE, SSE, SSE2, SSE3, SSE4.1, SSE4.2 FP

    Physical processor count: 4

    Processor speed: 2665 MHz

    Built-in memory: 16379 MB

    Free memory: 13443 MB

    Memory available to Photoshop: 14697 MB

    Memory used by Photoshop: 60%

    Tile image size: 128K

    Image cache level: 2

    OpenGL drawing: enabled.

    OpenGL drawing mode: Advanced

    OpenGL allows Normal Mode: true.

    OpenGL allows Advanced Mode: true.

    OpenGL allows old GPU: not detected.

    OpenCL Version: 1.2 AMD - APP (1084.4)

    OpenGL, Version: 3.0

    Texture size video Rect: 16384

    OpenGL memory: 2048 MB

    The video card vendor: ATI Technologies Inc.

    Renderer video card: AMD Radeon HD 7800 Series

    Display: 1

    Limits of the display: top = 0, left = 0, low = 1080, right = 1920

    Video card number: 2

    Graphics card: AMD Radeon HD 7800 Series

    Driver version:

    Driver date:

    Video card driver: aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, he's atidxx64.d, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll

    Video mode: 1920 x 1080 x 4294967296 colors

    Legend of the video card: AMD Radeon HD 7800 Series

    Memory: 2048 MB

    Video card: 1

    Video card: driver Microsoft Basic Render

    Driver version: 9.12.0.0

    Driver date: 20121219000000.000000 - 000

    Video card driver:

    Video mode:

    Legend of the video card: rendering driver Microsoft Basic

    Video card memory: 0 MB

    Serial number: 90970078453021833509

    The application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64-bit).

    Temporary file path: C:\Users\RAFFAE~1\AppData\Local\Temp\

    Zero Photoshop has async I/O active

    Scratch the volumes:

    C:\, 931.5 G, 534,8 free G

    Required plugins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Required\

    Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Plug-ins\

    Additional Plug-ins folder: not defined

    Installed components:

    ACE.dll ACE 2012/06/05-15: 16: 32 66,507768 66.507768

    adbeape.dll Adobe EPA 2012/01/25-10: 04:55 66.1025012 66.1025012

    AdobeLinguistic.dll Adobe linguistic Library 6.0.0

    AdobeOwl.dll Adobe Owl 2012/09/10-12: 31: 21 5.0.4 79.517869

    AdobePDFL.dll PDFL 2011/12/12-16: 12: 37 66,419471 66.419471

    Adobe AdobePIP.dll 7.0.0.1686 product improvement program

    AdobeXMP.dll Adobe XMP Core 2012/02/06-14: 56:27 66,145661 66.145661

    AdobeXMPFiles.dll Adobe XMP files 2012/02/06-14: 56:27 66,145661 66.145661

    AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14: 56:27 66,145661 66.145661

    adobe_caps.dll Adobe CAPS 6,0,29,0

    AGM.dll AGA 2012/06/05-15: 16: 32 66,507768 66.507768

    ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56

    aif_core.dll AIF 3.0 62.490293

    aif_ocl.dll AIF 3.0 62.490293

    aif_ogl.dll AIF 3.0 62.490293

    Amtlib.dll AMTLib (64-bit) 6.0.0.75 (BuildVersion: 6.0;) Brand: Monday, January 16, 2012 18:00) 1.000000

    ARE.dll ARE 2012/06/05-15: 16:32 66,507768 66.507768

    Axe8sharedexpat.dll AXE8SharedExpat 2011/12/16-15: 10: 49 66,26830 66.26830

    AXEDOMCore.dll AXEDOMCore 2011/12/16-15: 10: 49 66,26830 66.26830

    Bib.dll BIB 2012/06/05-15: 16: 32 66,507768 66.507768

    BIBUtils.dll BIBUtils 2012/06/05-15: 16: 32 66,507768 66.507768

    boost_date_time.dll product DVA 6.0.0

    boost_signals.dll product DVA 6.0.0

    boost_system.dll product DVA 6.0.0

    boost_threads.dll product DVA 6.0.0

    CG.dll NVIDIA Cg Runtime 3.0.00007

    cgGL.dll NVIDIA Cg Runtime 3.0.00007

    Adobe CIT.dll CIT 2.1.0.20577 2.1.0.20577

    CoolType.dll CoolType 2012/06/05-15: 16: 32 66,507768 66.507768

    data_flow.dll AIF 3.0 62.490293

    dvaaudiodevice.dll product DVA 6.0.0

    dvacore.dll product DVA 6.0.0

    dvamarshal.dll product DVA 6.0.0

    dvamediatypes.dll product DVA 6.0.0

    dvaplayer.dll product DVA 6.0.0

    dvatransport.dll product DVA 6.0.0

    dvaunittesting.dll product DVA 6.0.0

    Dynamiclink.dll product DVA 6.0.0

    ExtendScript.dll ExtendScript 2011/12/14-15: 08: 46 66,490082 66.490082

    FileInfo.dll Adobe XMP FileInfo 2012/01/17-15: 11: 19 66,145433 66.145433

    filter_graph.dll AIF 3.0 62.490293

    hydra_filters.dll AIF 3.0 62.490293

    icucnv40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615

    icudt40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615

    image_compiler.dll AIF 3.0 62.490293

    image_flow.dll AIF 3.0 62.490293

    image_runtime.dll AIF 3.0 62.490293

    JP2KLib.dll JP2KLib 2011/12/12-16: 12: 37 66,236923 66.236923

    libifcoremd.dll Intel Visual Fortran compiler 10.0 (A patch)

    libmmd.dll Intel(r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0

    LogSession.dll LogSession 2.1.2.1681

    mediacoreif.dll product DVA 6.0.0

    MPS.dll MPS-2012/02/03-10: 33: 13 66,495174 66.495174

    msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910

    msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

    MSVCP100.dll Microsoft® Visual Studio® 2010 10.00.40219.1

    msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910

    MSVCP90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

    msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1

    MSVCR80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910

    Msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

    pdfsettings.dll Adobe PDFSettings 1.04

    Adobe Photoshop CS6 CS6 Photoshop.dll

    Adobe Photoshop CS6 CS6 plugin.dll

    PlugPlug.dll Adobe CSXS branchezBranchez Dll Standard (64 bit) 3.0.0.383

    Adobe Photoshop CS6 CS6 PSArt.dll

    Adobe Photoshop CS6 CS6 PSViews.dll

    SCCore.dll ScCore 2011/12/14-15: 08: 46 66,490082 66.490082

    ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15: 08: 46 66,490082 66.490082

    svml_dispmd.dll Intel (r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0

    TBB.dll Intel Threading Building Blocks for Windows 3, 0, 2010, 0406

    tbbmalloc.dll Intel Threading Building Blocks for Windows 3, 0, 2010, 0406

    updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0;) Brand: BUILDDATETIME) 6.0.0.24

    WRServices.dll WRServices Friday, January 27, 2012 13:22:12 build 0.17112 0,17112

    Required plugins:

    3D Studio 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Accented edges 13.0

    Adaptive wide-angle 13.0

    Angular Strokes 13.0

    13.1.2 on average (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Bas-relief 13.0

    BMP 13.0

    Camera Raw 7.3

    Chalk and charcoal 13.0

    Charcoal 13.0

    Chrome 13.0

    Cineon 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    13.1.2 clouds (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    COLLADA 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Halftone color 13.0

    Color pencil 13.0

    CompuServe GIF 13.0

    Pencil tale 13.0

    Craquelure 13.0

    Crop and straighten Photos 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Crop and straighten Photos filter 13.0

    Hatch: 13.0

    Crystallize 13.0

    Cutting 13.0

    Features dark 13.0

    Deinterlacing 13.0

    DICOM 13.0

    Difference clouds 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Glow 13.0

    Move 13.0

    Dry brush 13.0

    Eazel acquire 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Embed watermark 4.0

    Entropy 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Extrude 13.0

    FastCore 13.1.2 routines (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Fiber 13.0

    Film Grain 13.0

    Gallery of filters 13.0

    Flash 3D 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Fresco 13.0

    Glass 13.0

    Scarlet contours 13.0

    Google Earth 4 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Grain 13.0

    Graphic pen 13.0

    Halftone Pattern 13.0

    HDRMergeUI 13.0

    IFF Format 13.0

    Outlines in ink 13.0

    JPEG 2000 13.0

    Flattening coefficient 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Blur of the lens 13.0

    Correction of the lens 13.0

    Lens Flare 13.0

    Liquefy 13.0

    Operation of Matlab 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    maximum 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Mean 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Measure Core 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Median 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Mezzotint 13.0

    Minimum 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    MMXCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Mosaic tiles 13.0

    Multiprocessor support 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Neon 13.0

    Paper notes 13.0

    13.1.2 color NTSC (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Ocean Ripple 13.0

    13.0 oil painting

    OpenEXR 13.0

    Paint Daubs 13.0

    13.0 palette knife

    Patchwork 13.0

    Paths to Illustrator 13.0

    PCX 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Photocopy 13.0

    13.1.2 Photoshop 3D engine (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Photo filter package 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Pinch 13.0

    Pixar 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Plaster 13.0

    Plastic wrap 13.0

    PNG 13.0

    Pointillism 13.0

    Polar coordinates 13.0

    Portable Bit map 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Poster edges 13.0

    Radial blur 13.0

    Radiance 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    13.1.2 range (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Read watermark 4.0

    Crosslinking 13.0

    Ripple 13.0

    Rough Pastels 13.0

    Save for the Web 13.0

    13.1.2 ScriptingSupport

    Shear 13.0

    13.1.2 asymmetry (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Smart Blur 13.0

    Smudge Stick 13.0

    Solarize 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Splash 13.0

    Spherize 13.0

    Sponge 13.0

    13.0 sprayed strokes

    Stained glass 13.0

    Stamp 13.0

    SD 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    STL 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Sumi-e 13.0

    13.1.2 summons (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Targa 13.0

    Texture veneer 13.0

    13.0 tiles

    Torn edges 13.0

    Watch twirl 13.0

    Draft of 13.0

    Vanishing point 13.0

    13.1.2 variance (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    13.1.2 variations (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Water paper 13.0

    Watercolor of 13.0

    Wave 13.0

    Wavefront | OBJ 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    WIA support 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Wind 13.0

    Wireless Bitmap 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

    Zig - zag 13.0

    Plug-ins option and third parties:

    DAZ Studio 3D bridge 12.0

    DazUpdateScene 12.0

    Plug-ins that could not load: NONE

    Flash:

    Mini Bridge

    Kuler

    Install TWAIN devices: NONE

    The nomenclature "7800 series" seems good.  Here is what my system shows under Windows 7 with catalyst 12.8:

    ...

    OpenGL drawing: enabled.

    OpenGL drawing mode: Advanced

    OpenGL allows Normal Mode: true.

    OpenGL allows Advanced Mode: true.

    OpenGL allows old GPU: not detected.

    OpenCL Version: 1.2 AMD - APP (938.2)

    OpenGL, Version: 3.0

    Texture size video Rect: 16384

    OpenGL memory: 2048 MB

    The video card vendor: ATI Technologies Inc.

    Renderer video card: AMD Radeon HD series 7800

    Display: 2

    Limits of the display: top = 0, left = 1600, low = 1200, right = 3200

    Display: 1

    Limits of the display: top = 0, left = 0, low = 1200, right = 1600

    Video card number: 2

    Video card: Radmin V3 driver mirror

    Driver version: 3.1.0.0

    Driver date: 20070808000000.000000 - 000

    Video card driver:

    Video mode: 1600 x 1200 x 4294967296 colors

    Legend of the video card: Radmin V3 driver mirror

    Video card memory: 0 MB

    Video card: 1

    Graphics card: AMD Radeon HD 7800 Series

    Driver version: 8.982.0.0

    Driver date: 20120727000000.000000 - 000

    Video card driver: aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, he's atidxx64.d, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll

    Video mode: 1600 x 1200 x 4294967296 colors

    Legend of the video card: AMD Radeon HD 7800 Series

    Memory: 2048 MB

    ...

    I use Catalyst 12.8 pilots at the moment and have a Windows 7 system and have a remote access utility called Radmin installed, but I don't know if seeing that Microsoft based Render driver is provided on Windows 8.  It seems that this could be the key, as the basic OpenGL implementation of Microsoft is made all in software.  If somehow driver Microsoft took control and you don't get really the GPU acceleration, then that would surely make things really slow.

    Rafaello, you have updated drivers...  You can post your top of your system information again?

    Have you tried a full, complete deletion ATI driver and reinstall from for example, 13.2 beta?  Here is the removal of ATI tool:

    http://sites.AMD.com/us/game/downloads/pages/catalyst-uninstall-utility.aspx

    -Christmas

  • Extremely slow printing wireless with HP Photosmart Premium C309g-m

    I see extremely slow print speeds when printing from a Mac or a Windows XP system on a new printer HP Photosmart Premium C309g-m wireless. The printer starts printing immediately when I request a print, but it only prints one line. It will take about 15 minutes then to print the rest of the page, each print after a very long break line. Print demo page doesn't exhibit this problem, only documents of programs such as Word 2008, Safari, and Firefox (I tried firefox on PC and Mac) are affected.

    If I connect to the printer via a USB connection it prints very well, so this problem seems to be the only wireless printing.

    Printer: HP Photosmart Premium C309g-m
    Computer: Mac mini (late 2009 model) (also tried a Windows XP laptop, by comparison using the latest drivers from the HP website)
    OS: Mac OS X 10.6.2 with all available updates installed
    Method of connection: cable Ethernet connection to the router wireless
    Printer drivers: version 2.2.1 (Apple provided, drivers HP never installed as system comes with 10.6)
    Wireless router: Apple TimeCapsule (early 2009) 1 TB, honing a/d and modes of b/g on 2.4 and 5 GHz. TimeCapsule is in transition as the DSL modem handles DHCP service mode
    Encryption: WPA2 Personal, no MAC filtering or hide the SSID.

    IP addressing scheme: all addresses are distributed by the server DHCP without reservation of any kind

    The TimeCapsule is sitting three inches from the printer and the printer indicates the complete signal. Connecting the printer to the wireless network and setup of the printer on the Mac went off without a hitch. Only when you print a test document discover us the problem. The wireless network will behave as expected when you access Internet from Mac and Windows devices (tested with a laptop computer Dell XP and a MacBook with OS X 10.6.2), so I don't see any problem with the wireless network together.

    Attempt to use:
    1 reboot and power off, wait, restart the computer
    2 reset the print subsystem, the printer off and on again and reinstall the printer

    3. disconnect the power to the printer and let it sit for several minutes before trying to print wireless.

    None of them worked.

    I don't know exactly what is happening... I'll have to think about.

    Looks like you're running with the current configuration.

    Can we call this resolved?

  • My HP 1200 printer is extremely slow, I reinstalled, still slow

    My HP 1200 printer is extremely slow, I have reinstaled, but still slow. Someone at - it a phone # I can call to help me, I'm not too good at this. Thank you, Rick.

    http://WWW8.HP.com/us/en/contact-HP/contact.html

  • Lightroom showing constantly "unresponsive" and very slow since the last update. With the help of Windows 10. Extremely slow import!

    Lightroom showing constantly "unresponsive" and very slow since the last update. With the help of Windows 10. Extremely slow import!

    Hi Dear

    Please see this thread windows Lightroom CC 10 'unresponsive' number.

    Let us know if this helps

    ~ Assani

  • Web site created with Adobe Muse is extremely slow

    Hello

    My website www.christiansanderstenor.com is extremely slow. I created the website with Adobe Muse, and everything seemed to be fine when I preview it in my browser. It is a Web site with a few things from Parallax and scroll one page JS libraries. I thought that Muse would optimizes all photos so that they would be the correct size, but it is running as if it was just too big or something. Any ideas?

    Thank you

    Christian

    Hi Christian,

    first thing I noticed is the large image, for example

    sanders_20140326_8234.jpg is 1.6 MB in size, so it will take a while to load.

    I suggest to optimize your images and then check it out, you should see the improvement in load times. You can refer to this article to get an idea on the optimization of assets

    Understand the size and resolution of your graphics card. Adobe Muse CC tutorials

    Work with images. Adobe Muse CC tutorials

    Let me know if you have any question.

  • M1212nf MFP - scanning is extremely slow

    I recently bought machine M1212nf MFP. Everything works well except the scan. No matter if I scan "with" or "without" HP scanning software is extremely slow. With setting the quality to 300 dpi in color, it is fine enough, it takes several tens of seconds to get the image to my PC. With 600 dpi setting, it takes several minutes and sometimes it does not and I have to turn the printer power off and power on. With up to 1200 dpi setting, it takes up to 30 minutes to scan the image and in most cases it ends any without indicating any error - it freezes just and the printer indicates that the communication is in progress.

    Is this a normal behvaior of M1212nf MFP? This means that I can't use higher image qualities? I checked the wiring configuration and network tha and everything seems ok. I have the printer connected to the wifi ASUS router so I use the LAN to print and scan. Any other data transfer go well on the network, so I guess that the network is not the problem.

    I bought this 'multifunctional' machine to replace my old printer and scanner with a single device. But so far, the scanner is unsuable for me because of its extremely low performance .

    Any ideas? Any tips? Thanks in advance for any help.

    What operating system do you use?

    What firewall and antivirus do you use?

    HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

    I would like to know what are the errors you receive?

    http://www.HP.com/go/tools

  • Extremely slow SD card

    Hi all! I'm having some problems currently with my Z5 Compact and SD card storage.

    I used to have a Sandisk Extreme 32 GB microSDHC card in my Z5C without problem for more than six months. About a month ago, I wanted to replace it with a Sandisk Ultra 64 GB adapters, and I have extreme with speed and battery problems whenever I try to use it.

    Some examples: when the camera app is set to store pictures and videos on the SD card, just start the camera application sometimes takes forever. The taking and recording of images is slow. In some cases, the animation of rotating savings appear for about 20 seconds, and finally the picture is still not stored on the card and lost. Spotify is unbearably slow when its storage location is set to the SD card. 5-10 second ago break almost whenever I go to a different track, during which the app will seem to freeze, there is no information on the course of the reading of the title, etc. Scroll to playlists often also freezes with all Flickr showing photos as "title unknown - unknown artist - unknown ', until it loads everything about 10 seconds later. I also get regular as messages "Track have available ', 'Go online to open the menu' or 'Storage not found', which all disappear after a few seconds, and once again, things are working. Two of these applications, camera and Spotify, work very well again as soon as I have them switch back to internal storage. They both work very well using the old SD card.

    The phone has become generally very slow, in some cases, it takes almost half a minute even unlock. He has also strongly affected battery life. A full charge is now usually empty inserted about 3 to 5 times faster without the SD card, probably because all the SD reading and writing takes a lot longer than expected.

    A cue point is a write speed supported about 12 MB/s for the card, which is still in the specification of a class 10 card. But I don't think that the sustained speed is the problem, it seems to be random file access. For example, one of the things I tried to take is clearing cache in Spotify, which reached about 10 GB in 3 000 files. Because the cache clearing in settings app seemed to freeze, I went to remove the folder in the file order. There, he showed that the removal of every single file took about 2-3 seconds until he would remove the following. If deleting hidden Facebook took more than 3 hours and nearly emptied a full battery charge. If I format the SD card, it seems fast for about half a day to a day, up to what the life of performance and battery life down again.

    At this point I don't know what the problem is. I have a few possible theories:

    • The SD that I may be defective, and could it works again if I just replaced?
    • Is the difference between Ultra/Extreme the problem? They both have the same speed, but extreme class are advertised as more quickly and about two times more expensive. My other Sandisk card, which was the extreme, worked fine, but I don't know if it's because of this. File access time is not advertised as a distinctive feature.
    • Is the shift from 32 GB to 64 GB (and thus SDHC to SDXC) question? That is, the Z5C there the speed problems with SDXC cards, and should I just replace the map with an equivalent model of 32 GB?
    • Should I go with a card from a different manufacturer? Is it not possible that that solved the problem?

    I was hoping that maybe someone here has an idea about their own experiences with SD cards, used in phones lines Z5, may have had the same problem at one point and present pointers on what is the possible cause.

    Thank you!

    Daniel

    Apparently, my card was not defective, but the Ultra line of SanDisk SD cards are simly not suitable for smartphones. I contacted customer support of SanDisk, and this was their response (translated by me, because the Exchange was in German):

  • extremely slow response on mac, used to work properly, the difficulty?

    No matter what I'm doing with TB on mac (OS of Yosemite, latest version of TB) it is extremely slow and unresponsive, tried uninstalled and installed again without success

    ewaisman,
    You still see the problem?

  • Extremely slow since 10.11.6 updating

    Since the update a few days ago everything is going slowly, barely usable.

    Someone has an idea of what I need to do?

    EtreCheck version: 2.9.13 (267)

    Report generated 2016-08-07 14:41:23

    Download EtreCheck from https://etrecheck.com

    Duration 20:05

    Performance: Poor

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Computer is too slow

    Description:

    Extremely slow since the update 10.11.06

    Hardware Information:

    MacBook Pro (13-inch, mid-2012)

    [Data sheet] - [User Guide] - [warranty & Service]

    MacBook Pro - model: MacBookPro9, 2

    1 2.5 GHz Intel Core i5 CPU: 2 strands

    8 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 4 GB DDR3 1600 MHz

    BANK 1/DIMM0

    OK 4 GB DDR3 1600 MHz

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 1024

    Video information:

    Graphics Intel HD 4000

    Color LCD 1280 x 800

    Software:

    OS X El Capitan 10.11.6 15G (31) - since startup time: less than an hour

    Disc information:

    Disk0 APPLE drive HARD TOSHIBA MK5065GSXF: (500,11 GB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    Macintosh HD (disk 1) /: 498,88 go-go (260,14 free)

    Encrypted AES - XTS unlocked

    Storage of carrots: disk0s2 499.25 GB Online

    HL-DT-ST DVD - RW GS31N)

    USB information:

    Apple Inc. FaceTime HD camera (built-in)

    Apple Inc. Apple keyboard / Trackpad

    Computer, Inc. Apple IR receiver.

    Apple Inc. BRCM20702 hub.

    Apple Inc. Bluetooth USB host controller.

    Lightning information:

    Apple Inc. Thunderbolt_bus.

    Guardian:

    Mac App Store and identified developers

    Launch system officers:

    [loaded] 7 tasks Apple

    [loading] 163 tasks Apple

    [operation] 68 tasks Apple

    Launch system demons:

    [loaded] 47 tasks Apple

    [loading] 163 tasks Apple

    [operation] 82 tasks Apple

    Launch officers:

    [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

    Launch demons:

    [loading] com.disc - soft.DAEMONTools.PrivilegedHelper.plist (2013-12-27) [Support]

    [loading] com.google.keystone.daemon.plist (2016-07-12) [Support]

    [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

    User launch officers:

    [loading] com.bittorrent.uTorrent.plist (2016-02-16) [Support]

    [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-08-06) [Support]

    Items in user login:

    iTunesHelper program (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

    Other applications:

    [ongoing] com.etresoft.EtreCheck.77152

    [loading] 407 tasks Apple

    [operation] 167 tasks Apple

    Plug-ins Internet:

    SharePointBrowserPlugin: 14.0.0 (2010-08-25) [Support]

    Silverlight: 5.1.41212.0 - SDK 10.6 (2016-01-21) [Support]

    QuickTime Plugin: 7.7.3 (2016-08-02)

    Web of Google Earth plugin: 7.1 (2015-11-22) [Support]

    Default browser: 601 - SDK 10.11 (2016-08-02)

    3rd party preference panes:

    None

    Time Machine:

    Time Machine not configured!

    Top of page process CPU:

    9% Google Chrome Helper (3)

    8% Google Chrome

    5% kernel_task

    4% hidd

    3% WindowServer

    Top of page process of memory:

    614 MB kernel_task

    557 MB Google Chrome Helper (3)

    Mdworker (7) 295 MB

    197 MB Google Chrome

    UserEventAgent (2) 115 MB

    Virtual memory information:

    2.15 GB free RAM

    5.84 used GB RAM (1.66 GB being cached)

    Used Swap 0 B

    Diagnostic information:

    7 August 2016, 14:02:36 self-test - spent

    Eruption of ~/Library/Logs/DiagnosticReports/app_mode_loader_2016-08-06-141209_[redacted].c August 6, 2016, 14:12:09

    /Users/user/*/app_list.app/Contents/MacOS/app_mode_loader

    You can start by uninstalling the remains of CleanMyMac3. But I do not think that this will greatly improve things. The long duration of Etrecheck indicates that the hard drive has failed.

  • emails are performing extremely slow

    Hello
    After I installed my new Dell PC with Windows 8.1, I wanted to start using Thunderbird as my emailprogram.
    I downloaded the version 31.6.

    However, it seems to me that the performance of the e-mail is extremely slow. Sending and downloading of emails are nice, but move an e-mail to the following in the Inbox takes up to 20 seconds! Removal of e-mails, same thing! In both cases, I get the message "TB is not responding.
    Switching between my two accounts is also a process frustrating, which lasts even longer.

    Pleae, which ca help me in telling me what I did wrong?
    Thanks in advance.
    Kind regards
    Haico

    Computers Dell seem to come with McAfee security/antivirus software pre-installed, and if this applies to your system, it is recommended to stop the McAfee analysis of the mail files:

    https://wiki.Mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues #McAfee

  • MP4 is extremely slow in Compressor 3 - upgrade?

    Hello

    I work a lot with the files mp4 (or m4v) and I use a compressor to encode them to the ProRes format - and then to the FCP 7. Currently using Compressor 3.5.3

    The problem: it is extremely slow. When dragging a mp4 file (say about 10 min) causes of compressor to think and reflect and think - and then dragging the parameters is the same. Compressor 4 is more favourable to mp4 files and would be faster? Or is it my computer which makes it slow?

    The MacBook Pro 2.6 GHz Intel Core i7, 8 GB 1600 MHz DDR3

    Thank you

    BTW, what I'm trying to do is to convert mkv in ProRes files. I do it in two steps: first Handbreak, then compressor. It is a tedious process, so if anyone has a better solution I would be happy to hear.

    If your Mac is the "thought", my guess is that it is not your version of the compressor or your MBP this os the cause. The source file - maybe something suspicious on the handbrake conversion

    A plain vanilla MP4 to transcode Pro Res must be handled smoothly by Compressor 3.5 - and fill a bit faster than real time.

    Try this. Take a one minute or two QuickTime movie and convert it to MP4. Now that import compressor and transcode to Pro Res.  OK it works?

    Also, check that your system drive has sufficient free space - say, a minimum of 10 to 15%.  And make sure that your destination disk has of space as well.

    Your question about compressor 4, the answer is Yes. The latest version (4.2) is quite a bit faster than 3.5 - especially for fairly new Mbps and iMacs. It is also an improvement by other means - including options for extended encoding, greater stability and ease of use. (But keep in mind that there is no shipment to capacity of compressor from FCP 7 4.2.)

    Good luck. Post back and we do know.

    Russ

  • My Mac Mini is extremely slow and any video will start but soon stops and intermittently starts and stop immediately. What is the reason?

    My Mac Mini (end 2012) 2.5 ghz memory 8 GB Yosemite 10.10.5 is extremely slow. I read a few articles on communities, but unable to solve the problem. I plan to upgrade memory soon. In addition, a video game doesn't quite work. It starts and stops in 5 seconds and restarts it for a few seconds and stops completely. An advisor to fix the problem will be appreciated.

    When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

    These must be run as administrator. If you have only one user account, you are the administrator.

    Run the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    The title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

    Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

    Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • Extremely slow AutoComplete for addresses after update to Thunderbird

    Yesterday I upgraded to Thunderbird since version 30 to 31, AutoComplete for addresses is now, while I have written messages that are extremely slow to suggest contacts. If I enter only one letter in the destination field, thunderbird hangs for about 20 seconds and then shows me suggestions.
    Type two letters quickly, thunderbird freezes for 13 seconds. typing 06:03 seconds
    All tested even in safe mode
    I have a local address book with about 9870 remote contacts (no address book) and before the upgrade, everything worked fine

    The problem may be due to the new AutoComplete feature looking for matches which include the search string, not just those that match at the beginning of address book fields, which was the old method.

    If you install MoreFunctionsForAddressBook, it will add a preference, morecols.autocomplete.match_just_beginning, that you can pass to true and see if it makes a difference. Tools(or AppMenu/options)/Options/Advanced/general/Config. Editor, paste the preference in search and double-click it from false to true.

    Edit: Version 0.7 of MoreFunctionsForAddressBook includes this switch on the tab to AutoComplete (valid for TB 31 +) Options.

  • My MacBook Pro is running extremely slow all of a sudden. Help, please!

    My MacBook Pro is in running extremely slow all of a sudden, that way for several days now and I can't understand what is the cause.

    Details: MacBook Pro (13-inch, late 2011)

    Processor - 2.4 GHz Intel Core i5

    Memory - 4 GB 1333 MHz DDR 3

    Storage - 500 GB SATA (264.44 498.88 free GB) drive

    OSX - El Capitan 10.11.5 version

    I tried the simple things such as checking for indexing spotlight, my home screen of the size of the compensation, first aid running in disk utility, etc.. But had no results. Any suggestions would be very appreciated!

    Back up all data immediately, as the internal drive may be failing.

    When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

    These must be run as administrator. If you have only one user account, you are the administrator.

    Run the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    The title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

    Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

    Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

Maybe you are looking for