MP4 is extremely slow in Compressor 3 - upgrade?
I work a lot with the files mp4 (or m4v) and I use a compressor to encode them to the ProRes format - and then to the FCP 7. Currently using Compressor 3.5.3
The problem: it is extremely slow. When dragging a mp4 file (say about 10 min) causes of compressor to think and reflect and think - and then dragging the parameters is the same. Compressor 4 is more favourable to mp4 files and would be faster? Or is it my computer which makes it slow?
The MacBook Pro 2.6 GHz Intel Core i7, 8 GB 1600 MHz DDR3
BTW, what I'm trying to do is to convert mkv in ProRes files. I do it in two steps: first Handbreak, then compressor. It is a tedious process, so if anyone has a better solution I would be happy to hear.
If your Mac is the "thought", my guess is that it is not your version of the compressor or your MBP this os the cause. The source file - maybe something suspicious on the handbrake conversion
A plain vanilla MP4 to transcode Pro Res must be handled smoothly by Compressor 3.5 - and fill a bit faster than real time.
Try this. Take a one minute or two QuickTime movie and convert it to MP4. Now that import compressor and transcode to Pro Res. OK it works?
Also, check that your system drive has sufficient free space - say, a minimum of 10 to 15%. And make sure that your destination disk has of space as well.
Your question about compressor 4, the answer is Yes. The latest version (4.2) is quite a bit faster than 3.5 - especially for fairly new Mbps and iMacs. It is also an improvement by other means - including options for extended encoding, greater stability and ease of use. (But keep in mind that there is no shipment to capacity of compressor from FCP 7 4.2.)
Good luck. Post back and we do know.
I have a Readynas 102 system with 2 drives of 2 TB. There are about 230 GB of data onto the disks. Yesterday, I upgraded 6.4.1, as suggested in the administration page. After that, the system is extremely slow. I use windows 7 pc and modem Asus, all wired. In windows Explorer, it takes minutes to get the folder hierarchy, if it comes with an answer at all. In many cases, that the answer is, disk unreachable.
Is there anyone who can help me with this
What firmware are you running?
The antivirus service is enabled.
My Mac Mini (end 2012) 2.5 ghz memory 8 GB Yosemite 10.10.5 is extremely slow. I read a few articles on communities, but unable to solve the problem. I plan to upgrade memory soon. In addition, a video game doesn't quite work. It starts and stops in 5 seconds and restarts it for a few seconds and stops completely. An advisor to fix the problem will be appreciated.
When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.
These must be run as administrator. If you have only one user account, you are the administrator.
Run the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be all Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ all Messages
in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu at the top of the screen bar.
Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.
Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.
Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.
The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.
Please don't dump blindly thousands of lines in the journal in this discussion.
Please do not post screenshots of log messages - text poster.
Some private information, such as your name, may appear in the log. Anonymize before posting.
When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
Yesterday I upgraded to Thunderbird since version 30 to 31, AutoComplete for addresses is now, while I have written messages that are extremely slow to suggest contacts. If I enter only one letter in the destination field, thunderbird hangs for about 20 seconds and then shows me suggestions.
Type two letters quickly, thunderbird freezes for 13 seconds. typing 06:03 seconds
All tested even in safe mode
I have a local address book with about 9870 remote contacts (no address book) and before the upgrade, everything worked fine
The problem may be due to the new AutoComplete feature looking for matches which include the search string, not just those that match at the beginning of address book fields, which was the old method.
If you install MoreFunctionsForAddressBook, it will add a preference, morecols.autocomplete.match_just_beginning, that you can pass to true and see if it makes a difference. Tools(or AppMenu/options)/Options/Advanced/general/Config. Editor, paste the preference in search and double-click it from false to true.
Edit: Version 0.7 of MoreFunctionsForAddressBook includes this switch on the tab to AutoComplete (valid for TB 31 +) Options.
Link to the product:
I bought this PC on April 25, 2016 and so far, it's the worst PC I've owned in my life!
I made 3-4 comments on this trash and its still not on the UK site!
I don't know if its the terrible material or mine is just a faulty PC.
1. my USB ports stop usually work (when I connect a device)
2. not a problem just a stupid thing made HP the HDMI is an output, which means that I can't connect to an output!
3. my PC often just freezes or gal
4. you could say "Your PC is riddled with virus" is not only 6 GB of storage was used and the only things I installed was autodesk, and google sketchup and steam and remote play and unity. I've done MANY anti virus scans using McAfee and AVG and there wasn't anything I uninstalled steam and everything and there is no difference my PC has been extremely slow.
5.i have the feeling that my ram is not working properly; I have 4 GB of ram but 3 GB usable but my PC normally stops when opening microsoft edge it stops just work and shifts.
6. When you exit an application on during a time and back to her he says just "not responding" every time!
7 Dissconectivty questions: I always disconnect from the internet when my wifi does not work. Not my wifi is fast so it should work, I checked my other device and it showed my wifi working this problem also applies to my HP printer all in one that still has a paper jam!
8 bad Proccesor: Please tell me I can replace it with a processor intel I5 - I7 skylake cause this Proccesor is a cheap AMD from £20 to 40 HP Proccesor please tell me if I can replace with this Proccesor:
9. useless graphics card: joke not but my brother can't play ROBLOX on smaller settings it is isn't a maximum of 16fps horribld? Well please tell me if I can replace it with a graphics card from Nvidia. These graphics cards will work? :
GTX - 660
770TI - GTX
-GTX 980 M (Fits in laptop computers do not see why not?)
AMD - 270 X
GTX - 1060
Or something better than that!
10. not a problem too, but a reccomendation: do not use a mirror as a screen, the screen is really bad its ok its TOO BRILLIANT just brilliant.
11. not a problem but a praise (only thing that I love) the sound quality is excellent but with the speakers to the front, but the caches are really ugly.
Can I change the graphics cards above? If I can PLEASE tell me if I need to replace the power supply or not (of course that's a Yes)
Question: I have the warranty will be voided if I upgrade the RAM? Also is there only 1 slot for a 4 GB of ram? Because I want to pass this to 8 (or 16 if possible) of RAM also I am disappointed that it is a 800 MHZ RAM! If I update to a 8-16 GB 2133 Mhz RAM would it work or need a power supply higher?
Yes, you might think I want this for the games, but no, I have this PC for a long time so I don't want it to be obsolete in a few months and I use game engines so I need this upgrade due to the more advanced over time.
Sorry to be negative in some areas, but these are the options that I wish to have
-Intel I5 (in link above)
GTX - 750TI 4-6 GB
-8 GB 2133 MHZ RAM
-Tell me food if I need to change it.
-GTX 980M 4-6 GB
-16 GB 2133 MHz or 8 gb 2133 Mhz
-Tell me feeding please!
the least possible but I can;
Intel I5 processor
GTX 1060 4-6 GB
-Tell me power!
Thank you very much for reading this! I could change mind about how the bad HP is. Please tell me recommendations how to
know if my PC is faulty or not or if it does not tell me how to acctually works.
Oh also can I change it for one SSD or SSHD?
Please tell me if these upgrades will work or not, or tell me another choice which can run top games settings regular 35-60 fps low - med (Cause I can't do high quality games using unity if my PC can't handle)
Thank you very much!
Note: I use my ipad because of my PC is slow...
Did you get this as a gift? Here is the care. With a modest 1.8 Ghz processor (welded) and a set of graphics, which is part of the CPU chip, and here is NO slot for a graphics card. Not possible to capacity except an increase in two modules of 8 GB RAM. It has a brick laptop to a power supply. What you have is a unit of basic inetrnet/e-mail.
In my humble OPINION, it should never be your waiting. Then, I thought that you have been pranking, but you're a Brit, so I stopped short.
I installed upgrading Windows 7 on my computer and everything is fine. However, when the system is idle and past in mode screensaver (with or without a password), the return of the screen saver mode are extremely slow (just a white screen). It is sometimes quick, sometimes it comes back in 3-4 minutes, but most of the time it takes a long time.
The system is a low end, but more than enough to manage w7. It consist of:
Pentium dual core (2140)
2 gig memory
NVIDIA 7300GT 256M
I tried to delete the zone alarm security suite, does not solve the problem
thought it was the HP 2610 print software, removed and still happens.
update the bios (MSI p4m900)
can someone figure this. Is there something that prevents him to return to the desktop.
Note that, I try to reboot from the blank screen by pressing the windows, right arrow, return. But I think also, it does not address key strokes.
I found a way to fix it! I did this:
1. Press win + r and run msconfig. Go to tools and brand to troubleshoot the computer, and then click Start.
2. then go to system and security and press electricityballance (not sure of the name in English because I have a Norwegian version..).
3. restart your computer.
4. my screen saver was not afterwards, but I gave it to display photos and now it works perfectly!
When I checked the general tab afterwards, it did not have the checkbox to use the... start (a last..) one has been verified and the second has a blue full mark.
I have faced this problem for 3 days and went to my service provider today to inquire.
My phone has been extremely slow, the time clock thing is for still running, and so my phone dies in 3 to 4 hours with no real use. I was told that it was because I need to update my OS but when I got home and plugged in it says that my phone is up to date and there is no upgrade available OS. I bought a spare battery to see if it was the problem and it is not. This is getting very frustrating. He even got to the point of when I lock the phone I can't unlock it during the same get the screen to turn on. the only way to start is to pull the battery out and put back.
What is the problem with my phone?
Hello maddy 22
It does not matter how old is your phone recharge your device software will help you of course but do not miss the KB14320 , I suggested after reloading of your device OS. Here's how to reload a device on a Mac software:
KB19915 How to perform a reload of the own software application smartphone BlackBerry using BlackBerry Desktop Software for mac
I hope this will help.
Click 'Like' If you want to thank someone.
If problem resolves mark message (s) as a 'Solution', so that others can use.
I use a College LAN, that gives me speeds of about 8 to 15 Mbps. However, the app store seems extremely slow when downloading. For example, I was freely upgraded to windows 8.1 and it appears that a 3.62 GB file should be downloaded. However more that had spent an hour and always download might not exceed more than 2%. Y at - it a remedy to fix the problem?
It's problem can occur if there is decline in the speed of the internet, or if the Windows store settings are corrupt.
1. have you checked the Internet speed when this problem occurred? (It's just to make sure that your Internet connection works fine at this instance)
2. What is the make and model of computer?
Cancel download of current Windows 8.1, to do this, refer to the steps below:
a. press on Win key + R key to bring up the run button, and then type the following command.
b. click on Cancel.
Perform the following steps and check if you can switch to Windows 8.1:
Step 1: Disconnect all unnecessary external devices connected to the computer (except the mouse and keyboard).
Step 2: Install all available updates.
Step 3: If you use a third-party antivirus software, you can uninstall it and check if you can switch to Windows 8.1.
Note: Even if you disable the third-party antivirus, Windows Defender will still work in the computer. This will protect your computer against malicious software and viruses.
Step 3: I suggest you to reset Windows store the cache and check if it helps.
You can follow the steps to do this:
(a) on the screen, press the key Windows and R to open the Run dialog box.
(b) type WSReset.exe and press ENTER.
Step 4: Run the Windows Update troubleshooting tool and check.
For more information, see the suggestions from the link below:
Update to Windows 8.1 of Windows 8
Hope this helps and let us know if you need help.
I updated Lightroom version 6.6.1 version 6.7 running on a laptop running Windows 10 (update of the anniversary). The first thing I tried was to create a panorama of 3 raw images. This operation was a success but it then became virtually impossible to change the image created due to performance extremely slow. The problems I encountered were reminiscent of those I experienced with the initial 6.6 upgrade. (i.e. before 6.6.1).
I have finally returned to version 6.6.1 with performance return to normal. Here's the info system (for 6.6.1) just in case where this assistance.
I wonder when I can expect a maintenance release to fix this.
Version of Lightroom: 6.6.1 
Operating system: Windows 10
Application architecture: x 64
System architecture: x 64
Number of logical CPUs: 4
Speed of the processor: 1.7 GHz
Built-in memory: 8077,7 MB
Real memory for Lightroom: 8077,7 MB
Real memory used by Lightroom: 307.1 MB (3.8%)
Virtual memory used by Lightroom: 263,0 MB
Memory cache size: 80.8 MB
Maximum thread count used by Camera Raw: 4
Camera Raw SIMD optimization: SSE2, AVX
System DPI setting: 96 DPI
Composition of the Bureau enabled: Yes
Exhibition: 1) 1366 x 768, 2) 1366 x 768
Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.
Graphic processor News:
GPU Intel(r) HD 4000
Check the supported OpenGL: past
Version: 3.3.0 - Build 10.18.10.4358
Renderer: Intel(r) HD Graphics 4000
LanguageVersion: 3.30 - Build 10.18.10.4358
(1) home canon Plugin
(4) attachment Plugin Leica
(5) attachment Plugin Nikon
Config.LUA flags: None
Map #1: Vendor: 8086
Subsystem: 124d 1043
Video memory: 32
Map #2: Seller: 1414
Device: 8 c
Video memory: 0
AudioDeviceName: SAMSUNG (Intel (r) display Audio)
GL_RENDERER: Intel(r) HD Graphics 4000
GL_SHADING_LANGUAGE_VERSION: 4.00 - Build 10.18.10.4358
GL_VERSION: 4.0.0 - Build 10.18.10.4358
GL_EXTENSIONS: GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_blend_color GL_EXT_abgr GL_EXT_texture3D GL_EXT_clip_volume_hint GL_EXT_compiled_vertex_array GL_SGIS_texture_edge_clamp GL_SGIS_generate_mipmap GL_EXT_draw_range_elements GL_SGIS_texture_lod GL_EXT_rescale_normal GL_EXT_packed_pixels GL_EXT_texture_edge_clamp GL_EXT_separate_specular_color GL_ARB_multitexture GL_ARB_map_buffer_alignment GL_ARB_conservative_depth GL_EXT_ texture_env_combine GL_EXT_bgra GL_EXT_blend_func_separate GL_EXT_secondary_color GL_EXT_fog_coord GL_EXT_texture_env_add GL_ARB_texture_cube_map GL_ARB_transpose_matrix GL_ARB_internalformat_query GL_ARB_internalformat_query2 GL_ARB_texture_env_add GL_IBM_texture_mirrored_repeat GL_EXT_multi_draw_arrays GL_SUN_multi_draw_arrays GL_NV_blend_square GL_ARB_texture_compression GL_3DFX_texture_compression_FXT1 GL_EXT_texture_filter_anisotropic GL_ ARB_texture_border_clamp GL_ARB_point_parameters GL_ARB_texture_env_combine GL_ARB_texture_env_dot3 GL_ARB_texture_env_crossbar GL_EXT_texture_compression_s3tc GL_ARB_shadow GL_ARB_window_pos GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_EXT_texture_rectangle GL_EXT_stencil_two_side GL_ATI_separate_stencil GL_ARB_vertex_buffer_object GL_EXT_texture_lod_bias GL_ARB_occlusion_query GL_ARB_ GL_ARB_fragment_program GL_ARB_vertex_program fragment_shader GL_ARB_shader_objects GL_ARB_shading_language_100 GL_ARB_texture_non_power_of_two GL_ARB_vertex_shader GL_NV_texgen_reflection GL_ARB_point_sprite GL_ARB_fragment_program_shadow GL_EXT_blend_equation_separate GL_ARB_depth_texture GL_ARB_texture_rectangle GL_ARB_draw_buffers GL_ARB_color_buffer_float GL_ARB_half_float_pixel GL_ARB_texture_float GL_ARB_pixel_buffer_object GL_ARB_draw_instanced GL_ GL_EXT_framebuffer_object ARB_half_float_vertex GL_ARB_occlusion_query2 GL_EXT_draw_buffers2 GL_WIN_swap_hint GL_EXT_texture_sRGB GL_ARB_multisample GL_EXT_packed_float GL_EXT_texture_shared_exponent GL_ARB_texture_rg GL_ARB_texture_compression_rgtc GL_NV_conditional_render GL_ARB_texture_swizzle GL_EXT_texture_swizzle GL_ARB_texture_gather GL_ARB_sync GL_ARB_framebuffer_sRGB GL_EXT_packed_depth_stencil GL_ARB_depth_buffer_float GL_EXT_transform_feedback GL_ARB_ transform_feedback2 GL_ARB_draw_indirect GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_ARB_framebuffer_object GL_ARB_framebuffer_no_attachments GL_EXT_texture_array GL_EXT_texture_integer GL_ARB_map_buffer_range GL_ARB_texture_buffer_range GL_EXT_texture_buffer GL_EXT_texture_snorm GL_ARB_blend_func_extended GL_INTEL_performance_queries GL_INTEL_performance_query GL_ARB_copy_buffer GL_ARB_sampler_objects GL_NV_primitive_restart GL_ARB_seamless_cube_map GL_ ARB_uniform_buffer_object GL_ARB_depth_clamp GL_ARB_vertex_array_bgra GL_ARB_shader_bit_encoding GL_ARB_draw_buffers_blend GL_ARB_geometry_shader4 GL_EXT_geometry_shader4 GL_ARB_texture_query_lod GL_ARB_explicit_attrib_location GL_ARB_draw_elements_base_vertex GL_ARB_instanced_arrays GL_ARB_base_instance GL_ARB_fragment_coord_conventions GL_EXT_gpu_program_parameters GL_ARB_texture_buffer_object_rgb32 GL_ARB_compatibility GL_ARB_texture_rgb10_a2ui GL_ ARB_texture_multisample GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_timer_query GL_ARB_tessellation_shader GL_ARB_vertex_array_object GL_ARB_provoking_vertex GL_ARB_sample_shading GL_ARB_texture_cube_map_array GL_EXT_gpu_shader4 GL_ARB_gpu_shader5 GL_ARB_gpu_shader_fp64 GL_ARB_shader_subroutine GL_ARB_transform_feedback3 GL_ARB_get_program_binary GL_ARB_separate_shader_objects GL_ARB_shader_precision GL_ARB_vertex_attrib_64bit GL_ ARB_viewport_array GL_ARB_transform_feedback_instanced GL_ARB_compressed_texture_pixel_storage GL_ARB_shader_atomic_counters GL_ARB_shading_language_packing GL_ARB_shading_language_420pack GL_ARB_texture_storage GL_EXT_texture_storage GL_ARB_vertex_attrib_binding GL_ARB_multi_draw_indirect GL_ARB_program_interface_query GL_ARB_texture_storage_multisample GL_ARB_buffer_storage GL_ARB_debug_output GL_KHR_debug GL_ARB_arrays_of_arrays GL_INTEL_map_texture GL_ARB_texture_ compression_bptc GL_ARB_ES2_compatibility GL_ARB_ES3_compatibility GL_ARB_robustness GL_EXT_texture_sRGB_decode GL_KHR_blend_equation_advanced GL_EXT_shader_integer_mix GL_ARB_stencil_texturing
Have you disabled GPU treatment?
I noticed from 6.6.1 to 6.7, in my case anyway, I had the GPU disabled in order to speed up the system. And in your case the HD4000 Intel isn't a particularly fast GPU and has ~ 100 MB of vRAM dedicated.
Hello everyone, this is my first post here... Since upgrading to v2015.2 Muse my site seems to load extremely slow... is - anyone else experienced this problem? my site is www.zander-creative.co.uk. Thanks in advance.
I had this problem on all my sites. Even on my last Web site template I created (18 August) in the latest version of Muse.
But I found a solution here: white white screen during the loading of a Muse site
At the top of the header
And then in the footer
I just installed Photoshop elements V14 on a PC with Win 10 Pro 64-bit. The PC has CPU i5-2500 3.3 GHz, 8 GB of memory with a 500 GB SSD.
It is extremely slow loading. I'm upgrading to V12 by using the same file in both versions (converter for V14). The V14 takes 15 to 20 times as long to load.
Does anyone have a suggestion on speeding up commissioning?
Once again thank you for your support on this issue.
In my initial note I should have identified my current version like 11 No 12.
I do not have the file of catalog on a network drive and I am connected to internet at the launch of elements Organizer.
As a further test, I moved the catalog of V 11 and V 14 files on my local drive which is a 500 GB SSD.
I ran and timed the same tests that I ran with the catalog on a network drive files.
The results were essentially the same thing with each test in 2 seconds faster on the local SSD.
11 v took 6 sec and V 14 took 150 seconds or 2 minutes and 30 seconds.
I also ran the new empty catalog test you requested. I created the new files to the local SSD.
The new V 11 file launched in less than a second, that it's too fast to measure.
The launch of a new file V 14 took a little more than 9 seconds.
Size of catalog file, regarding my current catalog has 57085 points.
V 11 db catalog file is 146 690 Ko with an inch of 792990 KB cache.
The conversion of catalogue V 14 of the V 11 file is 231 083 KB with an inch of 1 291 758 KB cache.
The V 11 has no problem with catalog picture file size but V 14 still has a very long time.
I want to upgrade to V 14 but I can't with her more time to start a new empty file V 11 to launch a file of more than 57 000 points...
I want to do all the other tests that you think will help.
After the upgrade to the Mavericks, my whole suite CS6 is extremely slow. It takes several minutes just to open a file and everything also so long to record. Has anyone else had similar problems? I looked on the forums and see where other users have problems with it crashing, but I don't have this problem.
Adobe Reader was probably installed as part of the Creative Suite. Check your request and see if there is a folder for Adobe Reader. If there is, then you should be able to run the installer from the United Nations to remove it from your system. At this point, it should be unavailable for Adobe, CS6 and CC applications. I tried to check myself, but my system 10.9 just died and I'm trying to resurrect.
My problem is exactly the same as resolved in this thread:
Flash is just unusable, due to extremely slow performance. Selection of a tool or by typing in actionscript takes forever. I also noticed that sometimes takes flash.exe (Yes only sometimes), a lot of CPU utilization, even when you make simple things as mentioned above.
On the same machine, before upgrading to Vista Ultimate x 64 to Windows 7 Ultimate x 64, 2 days ago, everything worked perfectly.
Please help me as soon as possible. Thanks in advance.
I had the same problem on W7 (32 bit). I also noticed that firefox really slows on pages with a lot of flash. I did not have this problem when I was using XP.
Is there any common code attached to each page of your application AW? Maybe it's
make a database call on each page.
What size of segment it is burglarized? You may want to quite large segments (I
think I use 128 K these days) so there are fewer applications server.
Portland, Oregon, United States
wrote in message
> These extreme slowness problems are only in pages created authorware and
> else. All other web pages and web applications work fine the slowness of the
> Authorware pages didn't happen until this server has been upgraded to 2003
> IIS6. Nothing on the local workstations have changed. I don't see how
> a local workstation matter? This server is nothing more than a web site
> running IIS. We have major DNS servers in the enterprise that our
> are pointed to who have no problem finding other web pages / web apps
> this server.
No matter what I'm doing with TB on mac (OS of Yosemite, latest version of TB) it is extremely slow and unresponsive, tried uninstalled and installed again without success
You still see the problem?
Maybe you are looking for
for some reason any my Toshiba netbook mb505 turns off when I remove the AC adapter / charger netbook. I can go on the netbook when its plugged in. I also see that the charger is plugged and not to charge and is 99%. If anyone can help it would be ap
I have one of those old laptops, and I can't find any support or downloads for her to www.toshiba.com.I bought one of these 210ct and it has been formatted when I got it. I saw him when he still had bones in it and it worked perfectly. Now when I sta
Hi all Merry Christmas / Happy holidays I have a few dvd movies that I want to add my suggestions iTunes account how can I do I own the movies but want to take them with me when I go on vacation and do not want to take my external hard drive with me
Hello I recently bought a HP Pavilion 15 (n097), which is pre-installed with windows 8... naturally I went down to Windows 7 and installed as a good number of pilots required system I could get my hands - everything seems to have worked pretty well,
I got the loop without end (updated 3/3) caused by a recent update from microsoft. I could rename the file on hold and can now access my computer again. I disabled updates. Is there anything else I need to do. I read that the registry should be c