LR 6 will not read the nikon D750 nef files!
Shot first time on NEF + JPEG , LR 6 cannot read NEF files, and jpeg files do not show again...! ???
Hi wachfull,
Please check if you have selected the correct destination folder when importing Images.
Reference: Adobe Photoshop Lightroom Help | Import photos from a camera or card reader
Kind regards
~ Mohit
Tags: Photoshop Lightroom
Similar Questions
-
Photoshop elements 13 does not support for the Nikon D750 NEF files
I just bought a Nikon D750 (July) and I am running a trial of Photoshop elements 13 for quick treatment, but even after the updates and updated RAW it will not open the NEF files, which is supposed to be supported?
Thanks for your reply, I discovered the problem and it was an older version of Nikon Transfer installed, used with the old camera, updated for Nikon NX - i with Nikon Transfer 2 built in and the files are now transferred to the computer correctly.
-
4.4 Lightroom won't open the nikon d750 NEF files
I have a strange problem. My files to import and open fine on my iMAC 4.4 Lightroom but will not import the files on my macbook Lightroom? Any ideas?
Cannot open the D750 files in Lightroom 4.4. You need at least 5.7 Lightroom to open these RAW files.
If they open up fine on a computer, then it has no 4.4 Lightroom, there a later version.
-
version 6.2.1 will not import the nikon nef files
upgrade to version 6 of lightroom, now import will not import my nikon 300 nef files.
Hi sengkye
Have you an error message when the import has failed?
Also, what is your operating system?
Concerning
Assani
-
USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.
It's a new 12 '' MacBook
-
Carpet * a DVD-RAM UJ-820 s will not read the cd rom cd-rom dvd
OK, I read the other posts on these discs. Mine will play DVD movies and play them. It will not read the dvd ROM CD CD-ROM etc.
This cannot be a hardware problem, it must be the software should not it?
Can anyone help?
Does anyone have information on how to remove these disks of the computer? Im sure I can install a new one myself if I really need to.
Unfortunately the computer is just out of warrantyHi Robert,.
Unfortunately, your problem sounds like a problem with the hardware with the optical drive. The player itself must be able to refocus its lenses to switch between DVD and CD formats, and also to pass the pressed DVD and DVD burned.
I suggest you tyre remove the device from the Device Manager Control Panel, then restart your laptop so that the optical drive will be recognized as a new component hardware and Windows will then be re - install with standard drivers etc. If this does not work then it looks like a new drive will be necessary.
Unfortunately you say not what model of laptop you have (the removal procedure is not the same in all cases), but in general if the car is equipped with in-house it is held in place with one or two screws accessible from the bottom of the laptop that should be removed first, then the optical drive can be slid out of its location.
Kind regards
-
Satellite A40-231: SD-R6112 will not read the DVDs I burned
I finally got my DVD burner to work, but now the drive will not read the DVDs I burned, which, of course, defies the point of having a dvd burner in the first place... When I insert my dvd recently burned, "working" light lights and stays on. Same thing happens no matter how many times I take it out and put plug back in, restart my computer, etc... any ideas anyone?
Hello
@Magnus:
Sometimes, CDs and burned DVD cannot be read with no closing sessions of engraving. You should check this option.
In addition, this burning program did you use?
I use Nero. Form is the program better combustion and I never had a problem.
What you need to do is to test several DVDs. not all media work on the disc. -
Original title: no dvd
I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer
Hi Lesliestones,
· Did you do any change on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1: I suggest refer you to the article in the Microsoft Knowledge Base and check if it helps.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
Method 2: You can run the fixit and check if it works.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
I hope this helps.
-
Help with my computer of dumping
I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?
If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.
-
E T5226 machine will not read the SD,.
E T5226 machine will not read the SD card, is there a driver for this problem? If I use a USB drive, the computer will read the card but when the SD reader support it don't read nor even appear in my computer screen.
Using Microsoft windows 7 UltimateHi Larry,
Thanks for posting your query in the Microsoft community!
I understand that this E T5226 machine won't read SD card. I will try to help you with this.
(1) did you make any changes before the show?
(2) you receive an error message/code?
1. check if the device is detected in Device Manager. Follow the steps to go to the Device Manager
i. click on start, type devmgmt.msc and then on enter.
II. research the name of the device
If the device is not detected in Device Manager, and check if it is the hidden device.
i. click on view under view hidden devices
II. develop all winks in Device Manager
III. there would be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer and connect the external device to the computer and check if it works.
2. install the latest drivers from the manufacturer's Web site and even ensure that the driver is compatible with the version of the operating system installed on your computer. check if it works.
Downloads & Documents - Support Desk / series T / T5226
http://support.gateway.com/us/en/EMAC/product/default.aspx?modelId=1626
Link: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
Installing the driver in compatibility mode:
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
3. check with any other card SD one another if it is get recognized or detected or you can even check if the same SD card becomes recognized or detected on the other computer.
Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.
-
When I download Canon 70 d to my adobe lightroom photos will not read anything else than .jpg files. Others are shown but foggy. When I try to import in lightroom, I get the impossible to read the message. Never happened before. Where am I wrong?
For the 70 D to be supported, you must at least 5.2 LR: https://helpx.adobe.com/de/camera-raw/kb/camera-raw-plug-supported-cameras.html
I suggest upgrading to LR6 (later). The upgrade is about 70 dollars and worth it - just my 2 cents.
-
I am trying to download Adobe Acrobat 8 Professional on my PC, because the disk drive on my computer will not read the disc. How can I associate with this download?
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
LR4.0 will not read the traces for iPhone App "Traces GPS"
Hello
I tried to understand, looking at this forum and another search on Google, why LR4 import tracklogs from the iPhone App GPS tracks.
As far as I can tell, the tracklog information and format corect seems to me. Here is a sample of the app:
<? XML version = "1.0" encoding = "UTF-8"? >
< gpx version = "1.0".
Creator = "traces GPS - " http://highorderbit.com "
" xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "
" xmlns =" http://www.topografix.com/GPX/1/0 "
" xsi: schemaLocation =" http://www.topografix.com/GPX/1/0 http://www.topografix.com/GPX/1/0/gpx.xsd' > .
< time > 2012-03-18T 23: 20:59Z < / time >
< trk >
< name > Track Log 2 < / name >
< number > 1 < / number >
< trkseg >
< trkpt lat = '+ 48.473296' lon = "-68.429246" >
< model > + 65.511414 < / ele >
< time > 2012-03-18T 23: 20:13Z < / time >
< / trkpt >
< trkpt lat = '+ 48.473379' lon = "-68.429238" >
< model > + 63.738411 < / ele >
< time > 2012-03-18T 23: 20:15Z < / time >
< / trkpt >
< / trkseg >
< / trk >
< / gpx >
Any idea?
Thank you
Steve,
The problem with the tracklog is the '+' in the specifications of the latitude. Remove the brands '+' the legible tracklog. Now, I'm not sure if a '+' is valid or not (http://developer.garmin.com/schemas/gpx/1.0/oxygen/index.html_h882410155.html), but for this time Jeffrey Geoencoding Plugin will not read the tracklog...
Beat
-
Is it possible to open the Nikon D750 raw files in photoshop elements 11?
Is it possible to open the Nikon D750 raw files in photoshop elements 11? I already tried to install the camera raw 8.7.1 but it does not work.
Not only PSE13 an update can use the ACR 8.7 necessary plugin. (Version 8.7.1 is expected soon, but not necessary).
Your option is to use the free DNGconverter (if in Win, you must at least Win7).
FAQ: Photoshop Elements will work with my camera, or why does not open my raw files?
-
I want to display the Nikon D7000 .nef files in Windows Explorer/widows Webcam live picture and use some ice with them in Windows Vista. I think that Microsoft's current camera raw codec not support.nef files from Nikon D7000. Furthermore, I would also like to use Adobe .dng files in files. VISTA has native free codecs for the same. Please season a solution?
original title: Micorsoft Camera Raw CodecAs far as I lnow... the following codec pack is
the most current available from Microsoft.Microsoft Camera Codec Pack
http://www.Microsoft.com/download/en/details.aspx?ID=26829
(Windows 7, Windows Vista Service Pack 2)
This package will allow RAW supported
camera files visible in Windows ExplorerThe following retail software is not Microsoft
but maybe worth a visit:FastPictureViewer Codec Pack
http://www.FastPictureViewer.com/codecs/
Maybe you are looking for
-
iPhoto crashes when you enter "places"
iPhoto crashes when you enter "places".
-
Why Apple makes it so difficult to communicate with them?
I would like to provide feedback to the design. The application from the App Store for iPhone has a problem with his section of the review/comment. (Does this software I use now, but a fight at a time) and I want to tell them about it. Now, I also wa
-
I was with us store at first and then I changed from Egyptian store because my address has changed, but after that, I noticed that all my purchases former disappeared, but I found that the r always here, but in the United States to store I tried to r
-
Error on HP Pavilion hard drive
HelloMy flag was not boot the system and ran an optimized hard drive DST check failed. The default ID is: M08031 - 0007B 0 - PXPAXF - 61VQ03. I don't know what it means and what to do next. Any help would be great. Thank you
-
HP Deskjet 2050: HP Deskjet 2050 incompatible with the Mac operating system installation
My laptop doesn't have a hard drive, so I tried to configure the printer remotely by sharing the drive through another computer, but when I tried to install the software, it says "this Setup program is not compatible with the version of the operating