LR does not normally

Similar Questions

• PC does not normally, will not open in Mode without failure. 124 Blue error screen.

  Hope you can help, I'm pulling my hair out here.

  Yesterday, my PC crashed and eventually would not load normally. When load it goes into a loop where he would try and fix the mistake (he could not), and then try a restore point, that will fix it either. In addition, the screen is highly pixelated on each screen, including the start of Packard Bell at the beginning screen.

  Randomly, when I booted up my PC today, it went in the tool to restart system and restarted the PC, and it started properly - no pixelations. It lasted for 5-10 min, then crashed again. After restarting, it returned to the same problems as above, pixelated screen and does not start in normal mode, Safe Mode only.

  I get the error code is below. I can locate the dump file, in that respect, but I don't know how open it to read (seems not that I have any program that can be read).

  Any help, advice, suggestions as to what I can do to solve this problem would be greatly appreciated!  Thank you

  Ian

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  BCCode: 124

  BCP1: 00000000

  BCP2: 886BD020

  BCP3: B2000040

  BCP4: 00000800

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini091310-01.dmp

  C:\Users\Ian\AppData\Local\Temp\WER-343077-0.SysData.XML

  C:\Users\Ian\AppData\Local\Temp\WER41D0.tmp.version.txt

  Hello

  Have you run BlueScreenView to see the Bug_Checks yourself? Very revealing.

  You run both BitDefender and AVG. Have two major antivirus on the same system,
  much less enforcement, certainly do not. Even those who are disabled and some uninstalled, will be
  load the pieces themselves into memory. Remains of those uninstalled can do the same thing.
  Uninstall AVG and BitDefender to help to uninstall, and then run the removal of their creator tools
  so that no remains are left behind. AVG is known to have caused strange problems. See
  below to get recommendations for use during the test, even better would be permanently.

  Just realized you also use what is called RadialPoint, and it's another antivirus.
  on top of those security program above - you must abandon it as well.

  When you load all programs antivirus/security of two or several you really decrease their and.
  effectiveness and thus your security. And resulting then all sorts of weird errors.

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  =======================================================

  You also load Adaware at startup and it sometimes causes also some questions so I
  would be to uninstall it. If you use the above recommendations you will not need, nor likely
  benefit of Adaware running in resident mode.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cancellation does not - normal?

  I have long cancellation before the new period begins and nothing happens. I received a Confirmation e-mail, but they take money from my bank account as no cancellation is sent

  This is a normal Situation for the Germany.

  I now take money back and to contact Support, but I'm very angry about this. Very serious.

  Hello Jochen,

  Please contact support by calling/chat for the confirmation of the cancellation or refund requests.

  Contact the customer service

  Kind regards

  Sheena

• iTunes does not support Windows 10 modern watches over tablets and newer laptops

  Hello.

  Since Windows 8, there is a new mode called available standby connected standby (Windows 8), InstantGo (Windows 8.1) or modern (Windows 10) from the previous day.

  Tablets with Windows and newer laptops use modern sleep every time instead of old standby mode when firstly, it turns off the screen and after a while CPU turnes off (S3 mode AFAIK).

  Computer works now similar to a phone in a Pocket, you can listen to music or get a call (Skype).

  Here is the description for developers on Miscrosoft MSDN: https://msdn.microsoft.com/en-us/library/windows/hardware/mt282515.aspx

  Developers need to make their applications compatible with a modern Eve, otherwise application does not work while the unit is in standby modern.

  There is a Microsoft Groove app installed music on my book of Surface with 10 Windows, he can play DRM iTunes media, and continues to play when the screen turns off.

  12.4.1.6 iTunes seems to be incompatible legacy applications because it stops to play my music if I let laptop intact for 5 minutes.

  I tried to explain this to a phone Apple support, but they told me that this isn't a problem with iTunes but Windows and I need to get in touch with Microsoft instead of Apple.

  I can't use my subscription Apple same music in music Groove as a solution because it is unable to read the DRM from iTunes m4p files, of course it can not directly access cloud Apple music too.

  Is it possible to transmit this information to Apple?

  I don't understand why Apple let iTunes must be installed on Windows 8 + because actually it works terrible.

  For example, it can not switch audio speakers headphones and vice versa (while other applications that correctly), there are also some problems of video output, sometimes also the iTunes window receive a second bar tiny minimize / closing maximise controls, also the search field sometimes loose the keyboard input.

  Developers need to make their applications compatible with a modern Eve, otherwise application does not work while the unit is in standby modern...

  I tried to explain this to a phone Apple support, but they told me that this isn't a problem with iTunes but Windows and I need to get in touch with Microsoft instead of Apple...

  Is it possible to transmit this information to Apple?

  Oleg,

  Support staff does not normally deal in development issues, so it is quite likely that simply, they did not understand the question.  To report it directly to Apple, use the comments link:

  http://www.Apple.com/feedback/itunesapp.html

  When you send feedback, try to be as clear and objective as possible.

  iTunes has a huge population of Windows users, so I don't know that apple is interested.

• Satellite L500 - 1 1 - webcam does not work

  Hello

  As stated above the webcam does not normally work with any program or Web site. I just got going with Skype and the fire came, but the picture was terrible. Now I can't get going again... Any ideas?

  Danny

  Cam works with the application pre-installed webcam?

• USB 3.0 Ports does not not on HP Pavilion dv7-6102sa

  Some time ago I did a complete reinstall of Windows 7 on my laptop, remove Windows 7 Home Premium that accompanies it and installing a fresh Windows 7 Home Premium.

  I had to install some drivers and updates, like you do and then found what I wanted to work, worked.
  
  Except the USB 3.0 ports.

  When I plug my USB 3.0 on a USB 3.0 flash drive, the access light flashes and then stops. But the operating system does not recognize and does not normal "du-DUM!" sound.

  In Device Manager , I see three other devices: Controller of Bus SMand two instances of the (USB) Universal Serial Bus controller. Clicking on software driver update , then "Automatically search for an updated driver" on both of these entries translates into a "Windows failed to install your controller (USB) Universal Serial Bus".

  My computer was purchased new in 2011.

  Any help would be greatly appreciated.

  Hello:

  Download and install the AMD Chipset drivers and reboot.

  You want the first file on the Web page.  To install the USB 3 and SMBus controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• System Restore does not work despite the train different restore points

  Despite all the restoration in train points highlighted that it will not restore only get the same attempt to message one another restore point

  Garry

  AVG does not normally interfere with the restoration of the system.

  Is set up to create computer system restore points?
  http://bertk.MVPs.org/html/missingrps.html

  Why can't you just uninstall programs you put on the computer? I assume you mean programs when you refer to "stuff"?

  What is your computer brand and model? You have a Windows XP CD? What is a Home Edition or professional?

• My computer does not start because of registry keys that have been accidentally deleted. What should I do?

  Some registry keys have been removed cleaning my computer from a virus. My program was a little too vicious in the cleaning process and remove some vital for windows key to operate. Now, whenever I start my computer, it says that it cannot, looking for the error, said that he has found and cured, then shuts down. Then I turn it back on, and it goes through the new. How can I put the key to register back where it is supposed to be without my computer turning off while I'm?

  You can if you start on the installation or a recovery disc and initiate restoring of the system in the environment of these discs recovery.  If you have no records, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD (although you need to drive on a computer of differentt).  Then boot on the CD on the computer of the problem.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  The disk does not usse the computer OS so it does not matter if the system does not normally or in safe mode.  He must always use the disk and these options should still be available from the disk.  Among the options on the disk, you can try the system restore and if that does not work then you can try the Startup Repair.  There are other options, we can try from the disc, but let's just try these for starters.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Action Center does not start

  I got a virus in my computer a few weeks ago and I managed to clean it away. However, I just noticed that the action center to my computer does not start.  Whenever I try to turn it on, it shows me a message "unable to start the Windows Security Center service. In fact when I use the services.msc program, that's not even be on the list here. Firewall does not normally or the other. It just shows the message "Update your firewall settings" and when I click on the box "Use the settings recommeded" it shows me an error message "Windows Firewall cannot change some of your settings for error code 0 x 80070424.

  Of course there is a lot of information on the Internet about the problem, but none of them does not seem to work in my case.

  I have Windows 7 Home premium sp1.

  I even tried to repair my windows installation, but that no longer works. He refused to uppgrade to a previous version, because the drive is off course basic win7 and my current one is win7 sp1. There are also some programs that are in conflict, even if I could not even find them in my computer.

  Is there any solution for this?

  It helped with my Action Center problem.

  http://GeekDrop.com/content/Windows-Security-Center-service-is-missing-and-wont-start-solved

  And this with the firewall.

  http://www.SevenForums.com/system-security/202166-unable-start-Windows-Firewall-2.html

  Win 7 security 2012 was the virus.

• Foreign key delete rule: no matching combination does not show a difference to compare models

  Hello

  I've noticed that if there are in the relational model a foreign key with delete rule NO ACTION and in the database (Data Dictionary), the delete rule is RESTRICT, no difference appears in the dialog box to compare. The difference is displayed if the delete rule for example is CASCADE and RESTRICT.

  Kind regards

  Robert

  Hi Robert,.

  Thanks for reporting this problem.  I connected a bug on this subject (21754221).

  This situation does not normally flow when an Oracle database is imported, but may occur when importing other types of database.

  Kind regards

  David

• LAN does not connect when I plug

  Machine model: Hp 4530 s

  Operating system: Win 7 64 bit

  Hay

  I'm trying to connect to internet through my LAN broadband, but when I plug the machine in, nothing happens.

  I have to connect to internet via LAN as my Wifi router is out of use.

  When I bought this laptop, I test once LAN and it worked.
  Now, nothing is happening, I tried to restart the machine, etc..

  Auto updates are on, I could get the updated driver, I don't know about that.

  Help please, thank you.

  This is your problem.  You are indeed right, that they are not supposed to look like that.  Each of these axes is a PIN on the ethernet cable.  If one of these pins is not, or not aligned properly, you will receive all the data ever.  This explains why Windows detects ethernet controller (which it does not normally when the hardware has failed), as well as why you do not get the activity lights.

  If you had only your laptop for two years and a half months you need to contact HP directly and have the laptop repaired while it is still under warranty.  I have a link that will be useful to get this process started for you.

  The link takes you to a form to fill out.  Once you fill it and she is treated, it will give you the computer warranty information, a file number and the phone number to call.

  HP Technical Support call case forms.

• Items 11 Organizer does not open

  Dear Sirs,

  I bought 11 PES, but it does not work! Organizer does not normally open

  and different data solutions the community has not solved my

  problem.

  I'm desperate! What can I do more?

  Best regards

  Carine

  Adobe ID [Moderator: Please, do not post e-mail address]

  Post edited by: Brett N

  JOEPIEEEE! My man IT is the solution! He could read the message below and did what was asked. After that, now, I can change preferences in the menu Organizer! This can help other people!

  Thanks for any help on this forum!

• Where PSE does not store the files on a Mac

  I just installed 10 PSE on my MacBook. I had been using Iphoto'08, but when I bought a new camera, I wanted something more sophisticated to organize my photos and editing and improve their.

  So far, I installed 10 PSE with success and played with him. The Organizer works well and does what I want it to do. My intention is to use Organizer for new photos and leave the "old" about Iphoto for now. However, what I can not function, is where PES stores files on Mac after that I have working on it. It doesn't look like they are back in Iphoto, as I made changes to the photos that do not appear in there.

  Can someone enlighten me on this?

  Yes, that's all. You have now. PSE does not normally create something other than a database entry, not a new file.

• Firefox does not restart after leaving normally

  I am running windows 7. Foxfire work properly until recently. It was last updated at 34.0.5. After starting the PC, Firefox seems to work normally. Sometimes, when I exit the browser to do something else, it restarts. Looking at the Task Manager, firefox.exe is always be running. To stop, it does not help.
  I have searched the knowledge base and tried the suggestions, remove ad - ons, reset, etc. I also completely deleted Firefox and reinstalled from a new download.
  Any suggestions?

  From what I've read other posts on this forum, the
  problem may be caused by the settings to erase history. It's supposed to
  to have been fixed in v30.

  Type of topic: preferences #privacy < enter > in the address bar.

  The button next to history, select use custom settings.

  At the bottom of the page, turn clear history when Firefox closes.
  At the extreme right, press the settings button. Activate ONLY the Cache and
  Form history and search for without touching the others turned off.

  This is not a cure but will make it easier if Firefox crashes in Windows.
  https://support.Mozilla.org/questions/997866 {web link}

• Firefox crashes on startup in normal mode and safe mode does not start reset mode

  using 26.0 FF
  using windows 7 Home premium v 6.1 (last)

  My problems started after the loading of 26.0 FF. If I start FF in normal mode it crashes. Same thing when I boot in safe mode. I close FF (while it's hanging) by clicking on the X in the upper right.

  When I launch FF in safe mode and click Reset FF, it crashes without FF never appear. I have to stop it using the Task Manager. Off mode reset, I can launch FF in normal mode and everything works fine. However, stopping FF does not close it. I have to use the task of the Manager close. Then I'm at square one when you try to start FF, i.e. reset firefox, crashes, Task Manager, stop, then start FF.

  When FF is on, I can open a new window of FF. All my addons are up-to-date. I reinstalled FF 26.0, three or four times.

  I deleted the cache and cookies.

  I scanned for viruses and rootkits etc. with microsoft security essentials and spybot.

  I've been a happy user of FF for over ten years and have never had a problem like this. Any help will be appreciated.

  Thank you!

  I think that I fixed it, it gives a trial because he has started to do this on my two PCs.

  Go to Options > general tab > start switch / "Show a blank page" and the charges of all good. What I used was 'Show my home page' which is the default page of Firefox with the Logo of Fox and history, Favorites and other options at the bottom.