Firefox does not restart after leaving normally

Similar Questions

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

  Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

  Original title: recovery problem

  Hello

  According to the HP Support Forums, this error may be to do with the hard or for other reasons.

  You never have it replaced with a no HP bought in car?

  Read these threads HP on your error code:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

  http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

  If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

  See you soon...

• Firefox does not start after the computer restarts

  Install Firefox, works great. Restart the computer, Firefox does not start, or finally when it tries to start the script errors occur. If I reinstall Firefox after restart of a computer, it works fine, once again when the computer is stopped at the next startup it is, will not be able to use Firefox. Firefox does not start in Firefox Safe mode, does not start in windows safe mode. Do not add now, nothing has been added, just the Firefox installer played complete the system restore on the computer, same problem. Windows 7 Pro. Remove Firefox from windows control panel, restart your computer, install firefox, will take place. shut down the computer, put on the computer, firefox does not start, or crashes. I am exploring now Web interface.

  I reinstalled Firefox, so it will run in order to perform the steps below.

  Here is the answer which took care of the problem,

  http://KB.mozillazine.org/Browser_will_not_start_up#Problematic_plugin_prevents_browser_from_starting

  "Site Web TrueSuite Log On" plugin (AuthenTec), is the question.

• Firefox does not start after the places.sqlite opening in Notepad

  Firefox does not load again. I tried to create a large folder of bookmarks, but I wanted them to hide so I tried to be clever and create a copy of my current places.sqlite who had no bookmarks added and moved elsewhere, then I added bookmarks and once that replace the current places.sqlite then I created a copy of this and put it elsewhere for more security and then I replaced it with the first places.sqlite I had copied. I had to go through that much trouble because for reasons, I was unable to delete the bookmarks by right-clicking and selecting delete. I had already tried to open places.sqlite in Notepad and since then is when it started to happen. I tried to reset the file extension type, or rather detached, but I can't figure out how. I also tried to remove completely any Mozilla partner, restarted my computer and then reinstall Mozilla, but it didn't work and I prefer not to try again or uninstall it because my computer has a very difficult time even boot Windows 10. He likes to get on the desktop and then never hang while I have to restart the computer continuously until it works.

  Can someone tell me what to do or where it is that I was wrong?

  Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  • Download the installer of Firefox and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all/

  If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.

  • Do NOT remove the "personal data" when you uninstall your current version of Firefox, because this will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but do NOT delete personal data when you uninstall Firefox which removes all Firefox profile folders and you lose your data.

  If you keep the problems, and then create a new profile.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• R7000 does not restart after hitting the buttons wireless & WPS

  Need help on my r7000. It has been installed and works fine for months but my son hit the WPS Wifi buttons and now it does not restart. I have just the lights power & internet on

  I must say that I am tech challenged & currently without laptop or PC. I think that I installed with a laptop computer and wonder if I need a connection difficult to solve this problem. I have just an iPad & iPhone right now.

  I thought that to reset the router through genius, but it won't let me connect. I was connected to the router with iPhone & I tried iPad too but same result.

  Do I have to restore the settings to factory & b If Yes, can I install without connection to a PC? I have Comcast modem & wifi.

  All hep much appreciated.

  I had to do a hard reset but it worked. Thank you for your advice

  Problem resolved

• After updating firefox does not restart

  On Linux Mint when Firefox is opened and at the same time the operating system package manager upgrades Firefox, then FF does not notify me that it needs to restart.

  I notice as some extension stops working. Later I have checked package manager newspaper and see, this FF had been updated. Was not in older versions while FF has notified me this reboot is required for firefox?

  Is this a bug or I have some missing parameter. I need notification window be visible until the user closes or restart of firefox...

  Unfortunately no, it looks like it's only done manually: https://support.mozilla.org/en-US/kb/update-firefox-latest-version#firefo...

• Firefox does not load after update on 09/12/14

  I downloaded the recommended update and Firefox could not connect to the server. Restore my computer to an earlier time and OK all worked.

  Hello Reh3335, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox. If please delete all the rules of the program for firefox to your firewall and let it detect the new version of the browser again.

  Difficulty of problems connecting to websites after Firefox update

• Firefox does not open after a reboot

  After I updated Firefox, it will work until I restart my computer. So simply, it opens at all and finally will come with an empty window that is not responding. I had this problem for months and just switched to Google Chrome because I had no time to deal with it more. I'm not a novice user and I've tried everything:
  It does not start in safe mode.
  I did a fresh install complete, even remove profile information.
  I checked my firewall and my anti-virus, and they are not the culprit.
  I scanned all my computer virus/malware.
  My computer is completely up to date.

  I don't really know what else to do. It works on a new installation until I restart my computer. There is no accident report I can give because it does not lock... He will not simply open. I'm running Windows 7 on a Thinkpad Edge.

  
  

• Since the upgrade to 3.6.13 on my Mac, Firefox does not restart tabs. I replaced th e ' |. ' "%7 C" as suggested in the article of technical support, but it continues to happen. Is this the same fix for Mac or is there a different difficulty?

  I have set preferences to "show my windows and tabs from last time '. I used the button "use current Pages". I changed the used the ' | ' and I changed the ' | ' to 7% C I read in one of the bandages. If Firefox is stopped and restarted, the Mac is still in place or after I turned off the Mac and then restart it, the problem persists. I'm on Mac OS X 10.6.5 on Mac.

  If you use Remove navigation, search and download history on Firefox in Firefox 3.5 and later to clear the browsing history when you close Firefox then restore the tabs from last session ("Save and exit" or "show my windows and tabs from last time ') does not work.

  See also http://kb.mozillazine.org/Session_Restore

• Computer does not restart after the update

  Description of the problem: I am unable to restart my laptop after receiving the update of microsoft onSaturday.  I have a gateway MT6707.

  I got the following error. "Unable to start Windows.  A recent hardware or software change might be the cause.

  If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.  If the power was interrupted during startup, choose start windows normally. »

  Start the reboot system (recommended)
  Start Normal Windows

  No matter which option I choose, the system attempts to restart and takes me right back to this screen above information.

  No other changes have been made to the other than the update.

  Please let me know how to proceed.
  Operating system: Windows Vista

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• PC does not restart after the restart for the recent updates of windows

  The other day after a windows update and restart my laptop is no longer starts.  It's a HP Pavillion Entertainment moidel with an I7 processor with windows 7 Home premium.  Initiually I see the HP logo, and then the welcome 'Please wait' screen - just like a normal restart onb - words but and the screen remains completely black and a rectangle appears which says "establishment of the custom settings for windows desktop update"-, then nothing happens for hours - nothing.

  no icons-no possibility to any what - all was going well until the reboot for updates of windows.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are facing some problems using Windows.

  Try the methods.

  Method 1:

  I suggest to disconnect all external devices except the keyboard, mouse and screen and check if the problem persists.

  Method 2:

  I suggest you do the startup repair using Windows 7 boot DVD/USB (Universal Serial Bus):

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Note: You can also create a system repair disc that contains the System Recovery Options menu. For more information, see create a system repair disc.

  Method 3:

  See the article and follow the steps if you are unable to perform a Startup Repair:

  Windows 7 no longer starts, and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• El Capitan loaded and running, but does not restart after it turns off

  I just downloaded El Capitan and installed on my iMac which was under Snow Leopard 10.6.8. There are 12 GB ram, and this is a 2009 end clocked at 3.06 Ghz version. The installation went well and it ran OK, everything seemed normal.  The problem came when I close shot tried to start again.  The Apple logo appears, and the progress bar goes about 2/3 of the way and hangs up.  I tried to reboot several times with the same results.

  Try to start safe mode and then restart try safe mode if your Mac does not end commissioning - Apple supportnormally

• FIrefox does not refresh after you download the update

  FIrefox sends an update message to 38.something. I downloaded and restarted a dozen times, but I am still on 37.0.1. I even restarted the computer. Why does not refresh updates?

  Hello lastdollar, Please download and install firefox, follow these steps:

  1. download a copy of the latest http://www.mozilla.org/en-US/firefox/all.html firefox (dmg full package - all languages)

  2. Trash , install the current application of Firefox to do a cleaning.

  3. install the version you downloaded.

  Do not select to delete your personal data, your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks or other personal data.

  See also: How to download and install Firefox on Mac

  Thank you

• Firefox does not start after putting in

  Troubleshooting of the measures taken:
  I uninstalled and reinstalled the program.
  I spend just clicked and ran as administrator.

  I get no error message. Just... nothing happens.

  Possibly associated, I tried to run the update of Adobe Flash and it does not either. Everything else seems to work fine on my system, including IE, however.

  Last updated:
  After Flash Player install, I decided to try to uninstall/reinstall with Firefox again and I uninstalled AVG 2012. And now, as if by magic, it works.
  2015 AVG found nothing in his comprehensive analysis of the system.
  I don't know what has changed. My best guess is that there is something in 2012 AVG blocking FF v. 36.
  Wish I could provide more insight.
  Thank you all for all your advice!