LR, mobile and iPhone: data GPS are not exported and crushed

Similar Questions

• Data GPS are not imported into LR 5.5.

  Data GPS are not imported into LR 5.5.  Photos taken with the Nikon D7000 have GPS data but is not imported into LR 5.5.  How can I fix?

  Try going to the card module, and then select all the imported photos.  Go to the menu at the top of the page:

  Photo > read metadata from file

• iPhone 6 GPS works not

  Hello

  About a year (like on iOS 9 version), GPS on my phone did not work.  When I would try to use maps from Apple, it seems that my car has been the road somewhere in the grass, and sometimes many roads above.  He could never stay with me while driving.  Also, this happened when using Google Maps, so I knew it wasn't just a problem with the Apple Maps app.

  I tried to restart the phone several times, remove the GPS applications and reinstall them, completely wipe the phone and start from scratch, etc.  The problem still exists.  So for a while, I just dealt with him.  I just use GPS my car if I needed one.  Although it has always bothered me that my 128 GB of 6 GPS iPhone did not work.  However, with the release of the 'Pokémon GO' game that is based on the GPS, I am very disappointed that I get a signal error my GPS is not detected (Yes, I have activated the application location services).

  Is there some app or something that I can use to diagnose my GPS antennas in the phone?  I have the full 5-bar signal (point?), and my phone is in developer/debug mode, so I can also see that the detailed signal is - 81.  I have AT & T as my carrier.  There must be a way to determine if something in my phone is damaged.  I would go to the Apple Store, but the closest is an hour and a half, so I would like to avoid that if possible.

  I have the same problem as well. I noticed when I tried to use the WAZE app for the first time since more than a year and it does not locate my position accurately enough. I've never really cared because I rarely travel too far and my GPS worked well enough for me to navigate when I should not rely on a map. Now that Pokémon GO is out which relies on positioning very accurate since some Pokemon can only be captured in some areas, it is really annoying that my phone takes a lot of time to put me in a general situation or fails to find me at all. I know it's just a game, but it's really annoying because it's the first week of release, and all my friends are playing. Seems my GPS only works pretty well to play when I'm more urban areas in my city (perhaps the buildings help focus signals on my phone) compared to parks and suburban more areas. The phone would make my position in the game by tens of metres offshore and sometimes would be me all about teleport to another whole BLOCK!

  I think it may be a hardware problem because I also noticed that my phone started to worsen to pick up WIFI signals as well. I use to be able to walk my business and maintain a good WIFI signal and now it seems that I can hardly connect to my router unless I'm less than 10 feet of it. Around, I read that this could be a short film of either a bad charging cable, damaged by the heat that damage the WIFI and GPS, modules or an update that fried partial systems.

  Edit: I checked my router with the new iPhone of others and they had really good reception of the WIFI signal like what I had at first, that's why I think it's a hardware problem.

• Why CF CV data warehouses are not visible in VCAC

  Hello

  We have after installation

  ESX/VC 5.5 (GA)

  VCAC 6.0 (GA)

  We are able to see all the warehouses of data, local, FC, and NFS in VC.

  We have added VC as an endpoint in VCAC, but we are not able to see the VCAC CF data warehouses.

  Anyone can throw some light on it?

  Thnaks

  Jeannine

  In fact a server in the cluster could not see these CF data storages, solved the problem by removing the server from the cluster

  Jeannine

• Timestamp for date columns data type are not imported in discoverer admin

  Hi all
  Someone you will suggest why timestamp data type columns are not imported into admin. discoverer other types of data import you correctly, but the timestamp data type columns are missed.
  
  Please let me know to change the type of data is not possible at this time.
  Thank you

  Hello
  You will be disappointed because the timestamp columns are not one of the recognized data types supported by the discoverer. He acknowledges only dates, strings and (integer and decimal) numbers.

  Maybe you could put up a view that matches the table you use, convert the timestamp in a rather ordinary date?

  Then, inside your end-user license, all you would have to do is redirect the folder to view.

  Best wishes
  Michael

• Data only are not accessible by the user system displays message Yo may not access this folder?

  Hello

  I'm working on active directory, I have my shared folder on the external drive on which my user profile is loaded and access by the same.

  But for some time it won't not give me access to employment on my user profile, if I move my user profile on internal external hard disk drive, I can't able to work, I don't know what happens and how to solve, I formatted the drive and still giving all the privileges of the user and the user can access.

  But every time it displays a message:

  "You are not allowed to access this folder, please contact your network administrator.

  Kindly solve my problem, I am waiting.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Action Wizard: options when saving PDF are not exported

  Hi all.

  I recently stumbled on something that my colleagues and I are confused of: we created some actions in Acrobat (Windows 7, Version (classic) 2015 2015.006.30060) DC and the last step in these actions is 'save the document. One who creates action games all the optimizings in the save pdf dialogue and is forced to save these settings - a dialog box appears to provide a name.

  This definition is not exported when you export all the action it is not exportable in the dialogue when you change the setting.

  How can we share these settings in our society without to set it manually on each computer?

  Any suggestions are welcome

  Best

  Dietmar

  Do you mean that you want to copy custom PDF Optimization settings, you have saved on another computer?

  If so, you should find them in this folder:

  C:\Users\\AppData\Roaming\Adobe\Acrobat\\Preferences\PDF Optimizer

• ITEMS ARE NOT EXPORTED TO THE EP

  After being there for a year I now create slideshows again.  I just reloaded Premiere Elements 8.0 on my machine.  I created slideshows on Elements 8.0.  They will not export PE either by "Burn to disc" or "change in PE.  Suggestions as to what I do wrong or not him did not?

  I also have a very basic question for the poster.

  What method do you use to create a slideshow? There are at least four ways to do?

  If you create your slideshow in the Organizer, there is a send to the Premiere Elements option that will send the slideshow to the organizer directly to a Premiere Elements project.

• Generate data that are not available in the table

  I have a table that has monthly data for agents. Example of table structure is the following:

  create table agt_dum)

  agent_id number,

  number of months,

  Commission number)

  Examples of data include:

  AGENT_ID MONTHS COUNCIL

  1	1	50
  1	2	100
  1	6	25
  2	1	10
  2	2	20

  Month value can be from 1 to 12.

  So as you can see these data is missing for the agents a few months.

  Here, the requirement is I need to generate data for each agent for 12 months. If the data is not already in the table and are should include agent_id, month number and commission is equal to zero.

  The output for the above data would be:

  AGENT_ID MONTHS COUNCIL

  1	1	50
  1	2	100
  1	3	0
  1	4	0
  1	5	0
  1	6	25
  1	7	0
  1	8	0
  1	9	0
  1	10	0
  1	11	0
  1	12	0
  2	1	10
  2	2	20
  2	3	0
  2	4	0
  2	5	0
  2	6	0
  2	7	0
  2	8	0
  2	9	0
  2	10	0
  2	11	0
  2	12	0

  I tried SQL query with full outer join. I was able to generate data for columns of MONTHS and the COMMISSION using the NVL function. But I have been unable to generate the AGENT_ID.

  Please share your suggestions.

  I'm using Oracle 11 g 2.

  Thank you

  Sudhanshu

  If you need something like:

  WITH agt_dum (agent_id, MONTH, commission)

  (SELECT 1, 1, 50 IN all double union)

  Select 1, 2, 100 of all the double union

  Select 1, 6, 25 Union double all the

  Select double union all 2, 1, 10

  SELECT 2, 2, 20 DOUBLES)

  all_months as (select rownum as LUN double connect by rownum<=>

  SELECT *.

  To all_months:

  partition outer join agt_dum ad bequeathed (agent_id) on (ad.month = am.mon)

  /

  It is not yet complete, but I'm sure you can handle the rest...

  HTH

• When I import pictures from my IPhone, the pictures are not in the order they were taken.  How do I make them appear long when I go to import.

  When I import pictures from my new IPhone 6 + are they out of temporal sequence.   Him are all mixed up, all over the import.

  Rob and DJ gave the answer, I'd give

  Maybe a phone drama than a drama of LR. Distant phones go I am one of those "so phones can now take pictures?"

• convert the data that are not text

  create table x as
  (line_1 varchar2(10))

  INSERT INTO x  VALUES ('001165899', '0506', 'ZIP1003', 'ABC', 'xyz')

  It is the source table, it transforms (to meet the requirements of the company) to another table where column line_1 is converted to a data type of number, and all the data in the column of line_1 which is the text are converted to-1.

  user628919 wrote:
  How the hyphen may be replaced for the data where it grows in different places within the data.

  The solution needs to keep other rules - convert to_number, text-1 column, ignore nulls (see below)-, more remove the hyphen of digital data.

  to_number(regexp_replace(line_1, '.*\D.*', '-1'))
  

  As Vivek L, complete with a convenient link for documentation, said "replace should work.

  to_number(regexp_replace(replace(line_1, '-'), '.*\D.*', '-1'))
  

  John

• How to check the data that are not digital?

  I have a varchar field and I would check for all of the lines where it does not contain a numeric value. How can I achieve this?
  Thanks in advance.

  One option is to write a small function

  CREATE OR REPLACE FUNCTION is_numeric( p_str IN VARCHAR2 )
    RETURN NUMBER
  IS
    l_num NUMBER;
  BEGIN
    l_num := to_number( p_str );
    RETURN 1;
  EXCEPTION
    WHEN others THEN
      RETURN 0;
  END;
  

  only then can you call

  SELECT *
    FROM some_table
   WHERE is_numeric( some_string_column ) = 0
  

  Of course, you can adapt the function to return the numeric value rather than a 1 or a 0 more.

  Justin

  Published by: Justin Cave on June 21, 2011 18:15

  Depending on the version of Oracle (which you don't mention), you can also write a regular expression to search for things other than numbers. This can become a little difficult if you have to manage commas and dots as decimal separators and grouping because different regions use the symbols differently and have different rules about what are valid models.

• Get the value of the ADF component when the control of data bindings are not used

  I'm doing some development with 11.1.1.1.3.0 JDev ADF. What is an apt approach to retrieve the values of the ADF Faces (in page jspx) components in the Managed Bean page? I do not have the use of ADF AM and no data controls.
  
  Published by: sackam on 10/17/2010 14:58

  You can access the value in a bean to support using an item.getValue ().
  Basics listed here:
  http://blogs.Oracle.com/Shay/2010/03/working_with_backing_beans_in.html

• All bookmarks in Firefox are not export as HTML

  When I try to export all my favorite Firefox they all aren't trying to import them in another browser (for example, Chrome or Safari). Is there a reason why that one of my bookmark folders is exported? Thank you very much for any guidance that you can lend.

  Do you not see that the lack of bookmarks if you open this HTML backup in a Firefox tab (Firefox > new tab > open a file)?

  If this isn't the case, then it is possible that there is a problem with the file places.sqlite.
  
  Problems with bookmarks and history does not properly can be caused by a corrupted database places.sqlite file.

  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• My InDesign CC 2014 are not exported in jpeg format... only in PDF. Any ideas?

  Hello.

  
  

  I've been using InDesign CC (2014) for awhile with no problems until recently when I tried to export to JPEG and I now have only the option to export to PDF. Does anyone know how to fix this?

  
  

  I tried a few things already with no success...
  

  The upgrade of my BŒUF to 10.10.3
  

  Restart my InDesign while removing my preferences/settings

  Try different documents to see if my file has been tampered

  
  

  Is it just time to upgrade my Mac. It is a mid-2011?

  
  

  I have no other problems with the suite Adobe... just that!

  
  

  Thanks in advance...
  

  
  

  
  

  I don't know if you've used the appropriate method for the restoration of your InDesign preferences. Use this method (if you haven't already done so):

  Garbage, replace, reset or restore the application's preferences

  If this does not work, try uninstalling InDesign (you can find it on the creative cloud app), or or find an uninstall program in the folder InDesign CC 2014. Then install again.