SkyDrive displays blank thumbnails of photos. No problem in IE8

Similar Questions

• View-only Lightroom 5.4 blank thumbnails or Photos

  Hello

  I have a new laptop, I installed LR 5.4 on. The program installed fine, and I entered my license of course key.

  When I try and import pictures (*.jpg), I only see blank thumbnails. I can import the photos, but the photo is also blank (gray), but a histogram is displayed.

  I was wondering if its associated color profiles. I had not chosen, compact, so I just took one by default. It made no difference. I recently installed a Spyder calibration software, but have not yet found the time to calibrate my laptop screen. I don't know if it is a question. But Lightroom seems to work well, put aside I can't see all of the pictures!

  What should I do to get Lightroom to work? I would add a few shoots screen too.

  Just to let you know, I had no problem with my previous laptop. I uninstalled Lightroom this laptop now.

  I got Lightroom works correctly in the end. Or the other of the two options I did work, not sure that one (or both), I had to do a reboot before I saw a difference.

  For the Windows color profiles, the option exists to restore the system default settings, so I did it to be on the safe side. I checked my graphics card settings (there are 2 equipped for my laptop). Intel settings allow applications to control the content of the media (see photo). I unchecked this option (which is what you can see on the photo. My Nvidia settings were fine, I couldn't see anything that could change things.

  And now Lightroom works fine

  P.S, seems that the forum won't let me not post more pictures, so there is no picture from Intel here.

• HP laptop G60 - display screen (photos attached) problem

  Someone has encountered a problem of screen like those shown below. I've updated display drivers and monitor, but the problem persists. Appreciate help with this.

  Best,

  DR

  

  It means then you need to replace your laptop display board and everything will be okay again.

• picture is not displayed as thumbnail, only an icon of the mountain

  When I open a window to view my photos, all that shows is an icon with mountains on it. If I double-click on the icon that the photo is displayed in the Windows Photo Gallery.  I can't tell what images are what, unless I click on each icon one at a time. The thumbnail appears correctly when I'm looking at him in a window that contains the source files on the camera connected via USB.

  I tried the suggestions to uncheck the "always show icons, never the photos" in the Folder Options view window and has no impact. The appropriate tile is briefly displayed when Windows accesses files, but the mountain icon always overwrites the appropriate thumbnail.

  Because the registry change has failed... it may be a good idea
  to do a system restore to a time before you used.

  Using Windows 7 or Vista System Restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/ Just some general info... There's a small chance
  the following links may be worth a visit:

  How to clear the Cache of thumbnails in Vista
  http://www.Vistax64.com/tutorials/73720-thumbnail-cache.html
  (Scroll down to: here's how)

  How to clear the Cache of thumbnails in Windows 7 and Windows Vista
  http://www.Winhelponline.com/blog/clear-thumbnail-cache-Windows-7-Vista/

  Also... If you cannot view the thumbs in the photo gallery of the
  the following link might be worth a visit:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Photo and slideshow problems
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/en-us if no success... try to rename or delete the Photo
  Gallery database:

  The "Pictures.pd4, .pd5 or .pd6' (according to
  on the version of your photo gallery), database includes
  inches and metadata and is located at the following
  location.

  C:\Users\[username]\AppData\Local\Microsoft\
  Windows Photo Gallery\Pictures.pd4, .pd5.
  or .pd6

  The file ends with a advanced
  Research of pd4 pd5 and pd6.

  Reach... Start / Search / Advanced search.

  Check the box... "include not indexed, hidden,
  and the file system"enter pd4, pd5 pd6 in the
  Name field

  When you rename the file .pd4, .pd5 or pd6 should
  clean your library.

  Try a click right/rename it...      Pictures.OLD
  If you are not satisfied with the results... you can
  Delete the new file and rename the OLD file
  Back to Pictures.pd4, .pd5 or .pd6.

  Photo Gallery will return to what it was the first
  time that you opened it. The gallery will have to re-
  complete and you may lose some tags.

  Good luck...

• How can I fix the LR 5 blank thumbnails?

  Microsoft just wiped it and then reinstalled win 8.1. I loaded Lightroom 5 and see only the blank thumbnails. If I click on a photo I can see what is under the gray, but when I click on another inch the previous photo becomes grey and I see the current image. Of course, I'm in the middle of a huge delay. I did remove LR and reinstall a second time but no improvement. Any ideas on how to solve this problem?

  Suggestion 1 worked. Thanks for a quick reply. L

  Linda Kazares

  flutterDshutter.photography

  480-353-9415.

  [email protected]

  Sent from my iPhone

• Do not display WMF thumbnails

  I have some lareg WMF (Windows Metafile) file from the Microsoft Clip art site. In XP they always displayed as thumbnails, but since I changed to Vista I can't see one of them. I see some files JPG and PNG, appearing as the pictures, but none of the WMF files.

  I checked the settings under Folder Options and checked that "Always show icons, never thumbnails" is NOT checked. Also, the display is set to average-sized icons, but it does not matter what I choose in this drop, as none of the WMF files display.

  Even more curious, is that the folders that contain several types of files (such as JPG, PNG, WMF) will display thumbnails of all but the WMF files.

  Can anyone provide any assistance would be greatly appreciated! Thank you!

  Hello Tom_Rawls,

  Thank you for your message.  You cannot view .wmf thumbnails is because file recognized as a serious security threat, so Microsoft has disabled this feature in Vista.  If you still want to display thumbnails, you will need a 3rd party software such as www.xnview.comWeb.  I have attached a few articles that explain the threat to security for your comment.

  http://thevistaforums.com/index.php?showtopic=25399

  http://www.v3.co.UK/vnunet/news/2148701/Vista-falls-WMF-flaw

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See you soon

• How to display a thumbnail view of pictures? My vista does not list the thumbnails in the dropdown display menu.

  How to display a thumbnail view of pictures?  When I open the folder what I see is a generic panoramic picture rather than individual images.  My vista does not list the thumbnails in the dropdown display menu.  Before updating the Windows I used to be able to see thumbnails of my photos views when I opened the files with images inside.

  Here's a possibility... go to... Start ORB / Control Panel.
  Folder options / tab / files and folders / uncheck
  "Always show icons, never thumbnails" / apply / OK.

• WMV, MPEG don't show thumbnails but MP4 movies display a thumbnail.

  original title: my video files show no thumbnails

  My video files don't show thumbnails, and it's frustrating.  Present no WMV, MPEG, but MP4 movies display a thumbnail.  My computer is Windows 7 64 bytes, appears this happens in many on the internet, would be grateful for an answer to how to solve this problem

  Hello

  (1) you have any third-party codec installed on the computer?

  (2) did you of recent changes to the computer before the show?

  I suggest to refer to the article and perform the steps mentioned by Afzal Taher on January 5, 2010.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/my-video-files-are-not-automatically-creating/90fa45eb-82a0-4384-af53-db8109d7fc19

  NOTE: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

• How to display a thumbnail of ORDImage without store?

  Hello
  
  I use Oracle 10 g r2.
  
  I need to show the ORDImages (and BLOBs).
  
  Here is my procedure that displays the thumbnails:
  

  create or replace procedure show_photo_thumbnail(v_id_photo in number, v_height in number, v_width in number) as
       obj ordsys.ordimage;
       obj2 ordsys.ordimage;
  begin
       --obj2 := ordsys.ordimage.init();
       select phot_source into obj from photos where phot_id = v_id_photo;
       select phot_source into obj2 from photos where phot_id = v_id_photo for update;
       obj.processcopy('maxscale= '||v_width||' '||v_height, obj2);
       owa_util.mime_header(nvl(obj2.getmimetype(),'application/octet'), false );
       htp.p('content-length: ' || obj2.getcontentlength());
       htp.p('content-disposition: filename="' || obj2.source.srcname || '"');
       owa_util.http_header_close;
       wpg_docload.download_file(obj2.source.localdata);
       commit;
  end;

  It works, but if I call this function several times (from our apex application), the quality of the image becomes less good, it seems, that he always treats the same image.
  And for example if I call show_photo_thumbnail (1126, 150, 150) , then show_photo_thumbnail (1126, 500, 500), so it seems that the image of 500 x 500 is treated 150 x 150 thumbnail quality is very poor.
  
  I have read all the documentation and I don't really understand why.
  
  By calling this another procedure, we can see that the stored content stay unchanged:
  

  procedure show_photo_infos(v_id_photo in number, v_height in number, v_width in number) as
       obj ordsys.ordimage;
       obj2 ordsys.ordimage;
  begin
       select phot_source into obj from photos where phot_id = v_id_photo;
       select phot_source into obj2 from photos where phot_id = v_id_photo for update;
       obj.processcopy('maxscale= '||v_width||' '||v_height, obj2);
       dbms_output.put_line('obj  : '||obj.getmimetype()||', '||obj.getcontentlength()||' bytes, '||obj.getwidth()||' x '||obj.getheight());
       dbms_output.put_line('obj2 : '||obj2.getmimetype()||', '||obj2.getcontentlength()||' bytes, '||obj2.getwidth()||' x '||obj2.getHeight());
  end;
  
  show_photo_infos(1126, 200, 200);

  obj  : image/jpeg, 79754 bytes, 572 x 504
  obj2 : image/jpeg, 4635 bytes, 200 x 176

  Any help would be appreciated.
  
  Thank you.
  
  Yann.

  It should work exactly the same for ORDimage and BLOBs, as ORDImage stores and updates the content of the image in an attribute of the BLOB.

  The difference you see may be because the object that you read. In the first example, obj2 has been selected for the update, but obj1 wasn't. The local variable obj1 had old data that has been printed, and it did not differ from data of obj2, which took the changes that have been updated in the table.

  If you do not want the updated image, you can then select to update, make the changes that you are currently, but the restoration then in the end (after downloading the content). Then the original image will be stored in the table and the changes made as part of this operation will be ignored. The next time that you run the procedure will operate on the original image.

  I note also that you have a commit in the first code snippet, but not later. According to your logging settings, which could have an impact as well.

• I have 50 GB of iCloud and my computer is full because of photo storage problems. How can I get these pictures in my icloud? I checked all my settings. Everything is as it should be. I feel as if I had downloaded originals or something.

  I have 50 GB of iCloud and my computer is full because of photo storage problems. How can I get these pictures in my icloud? I checked all my settings. Everything is as it should be. I feel as if I had downloaded originals or something. I don't know how to understand it. I Googled, I tried to get on my computer. Emptied my Recycle Bin and my download folder. I know I must be missing something.

  We need to switch to "Optimize the storage of Mac", see it - http://www.imore.com/how-save-space-optimized-storage-and-icloud-photo-library

• Firefox displays blank spaces where text should be (for example, by displaying the code), but other browsers

  Firefox does not completely display the text in a Web site, but other browsers. It displays blank spaces in some sections.

  Thanks to all who have replied but I actually quit using firefox after this frustration. I finally found a solution of this page: http://askubuntu.com/questions/118346/firefox-doesn ' t-display-site Web-text

  I had run the script to reset the cache of police on machines and change the permissions. Now, everything seems to work correctly. I look with suspicion, but I think I can use firefox!

  Thank you!

• Previously, during display of the image (photo) in the tab, it displays the resolution of the image, how to recover the photos (pictures) display resolution?

  Previously, during display of the image (photo) in the tab, it displays the resolution of the image, how to recover the photos (pictures) display resolution?

  You bring up the title bar via the "Title bar" button at the bottom left in the palette to customize window

  • Firefox menu button > customize > title bar
  • https://support.Mozilla.org/KB/learn-more-about-the-design-of-new-Firefox

  

  See also:

  • https://support.Mozilla.org/KB/how-to-make-new-Firefox-look-like-old-Firefox
  • https://support.Mozilla.org/KB/common-questions-after-updating-to-new-Firefox

• thumbnails of photos/videos?

  Does anyone know how to access the thumbnails of photo or video that are shown by the construction in camera app?

  through the file system, I can access the images and video taken by the camera, but don't know how / if the thumbnails are possible.

  -kramkram

  kramkram wrote:
  ...

  through the file system, I can access the images and video taken by the camera, but don't know how / if the thumbnails are possible.

  There are only files taken by the camera, without thumbnails AFAIK. Think you do it by yourself if you need thumbnails.

• about-> network displays blank page

  Hello

  After upgrading my Blackberry Z10 Dev Alpha B FW at 10.9.10.35.  on-> network displays blank page. So I couldn't find MAC address, what could I do?

  Nevermind, I cound find information on using ssh

• Display hidden folders or Photos blackBerry smartphones

  Does anyone know how to view files or pictures you hid?

  I created a folder in my pictures and them marked as hidden with some pictures, now I can not know how to display the folder or Photos.

  It will be when you find the right folder.