LR Mobile calibration and color - differences between Mobile & LR

Similar Questions

• Color difference between LR4.4 and CS6

  Why is the different colour of the LR4 to CS6?  Using Spyder to calibrate the screen and I know CS6 picks up the Spyder calibration but not sure is that LR4 resumes the same calibration.  Both are set for space color sRGB.

  Lightroom and Photoshop use the default monitor profile operating system (Mac or PC) to the display of the photo files. Therefore, it is best that your monitor is properly calibrated and profiled using a hardware device. (There is no option to select in the opposite case, it is possible to select the sRGB or aRGB as your monitor profile, but there is a work around and you may see evenly rendered color, but not good).

  Lightroom by default uses a working color space, which is a variant of Pro Photo RGB. This cannot be adjusted or an alternate selected.

  Photoshop has the ability to choose the color space work, Pro Photo RGB, Adobe RGB, sRGB, etc.. If you want to have the best match between Lightroom and Photoshop, it would be best to choose Pro Photo RGB as your working color space in Photoshop.

• Research and correspondence - difference between 'Match' and 'geometric model Match "?

  I was wondering if someone can explain to me the difference between 'Pattern Match' and 'Geometric pattern Match' screws? I don't really know how best to use for my application. I'm search/match small spherical particles in a video gray in order to follow their speed (I do that after subtracting the two following fields to get rid of background motion artifacts).

  Which should I use?

  Thank you!

  Hi TKassis,

  1. you can find from this link for the difference between these two,

  Pattern match: http://zone.ni.com/reference/en-XX/help/370281P-01/imaqvision/imaq_match_pattern_3/

  Geometric game: http://zone.ni.com/reference/en-XX/help/370281P-01/imaqvision/imaq_match_geometric_pattern/.

  2. I always prefer the match pattern because of its speed of execution and incase of correspondence to the geometric model that it took a lot of time to match your result. You can find in the attached figure for the same image with these two run time algorithm.

  

• Color difference between AE and PP export h.264

  The screenshot should explain my problem.

  I have an AE project that I exported to a PNG sequence, I imported in PP. Pp, I exported my end result to the H.264 format.

  The result is the image. The image in the foreground is the .mp4 file in QuickTime. The back picture is the material of origin (same frame) in AE.

  

  I'd like some advice on what settings to look when troubleshooting this gap.

  Thank you!

  Look at him in an another video Viewer to see if there is still a difference.

  Is it on Windows or Macintosh?  QuickTime on Windows can have a separate color for her tint.

• Functional and data differences between W_GL_BALANCE_F and W_GL_OTHER_F

  Hello:
  Some explain what are the functional differences and source of data between W_GL_BALANCE_F and W_GL_OTHER_F? The two seem to group by GROUP_ACCOUNT_NUM.
  
  Thank you.

  It is not possible; all transactions in GL other eventually GL balance.
  Both tables have essentially the same data but different grains. Two main differences:

  -Other GL have transaction log; GL balance make them summarized at the account level.
  -Other GL is really additive since its transactions of individual entries. that is, you can just sum() any number of transactions and double counting used a trx; Balance of GL is a table of monthly snapshot. that is, it provides account balance for all accounts for the end of each month, so you can never add two snapshots.

• Rendering of the DVD and burn: differences between Premiere Pro and Premiere Elements

  I'm Photogaphy landscape and wants to create slideshows in Premerie or import them at 1080 H264 quicktime files generated by Ligthroom 3 first.  I do not make frame-by-frame video editing.  My only goal during the first use is to be able to return or to burn DVDs and finally Bluetooh compatible DVD for playback on TV commercial flat screen, for example, Samsung flat panel dvd.

  Are the DVD rendering and burning capablity of first Pro CS5 and first 9 equivalent elements, IE, which are both likely to produce DVDs that render with natural colors on commercial flat screen TV?

  • My previous experience is that my generated 1080 Lightroom, quicktime H264 movies have perfectly natural color on Mac LCD and other computer screens but see even on a saturated on commecial color flat panel TV.
    
  • Discussions with Adobe tech support people are contradictory on this subject.

  Still is no longer a stand-alone program and is only available with PrPro from CS3. In addition, due to lack of license, the 'trial' of still basically is disabled. Don't even think that you can make a form any try-out, but maybe some features in Encore CS5 has been added. The limitation is that no PrPro Adobe, or trial still has any abilities MPEG-2 - only with fully-paid version. I'm sorry.

  Good luck

  Hunt

• BlackBerry Smartphones what the purpose and the difference between Blackberry devices and software updates to the Blackberry Manager?

  I got my new Blackberry Curve 8330 3 weeks red and I installed the BB Desktop Manager that comes with the CD called Blackberry user tools.   Now when I click on "updates" on the lower part of the Desktop Manager, a popup window with all sorts of information that I don't know where to go first.  My version of the op is a 4.3.0 xxx what is desktop software for? Is this software integrated with the Desktop Manager, or is it a separate thing?

  Hope to hear from you beautiful peeople soon to explain this for me!

  Not necessarily. I'm a tech person, so I'd rather have the latest greatest version of ang of the software I use. So if you are happy with 4.3 and it is not crashing or causing errors so feel free to continue using it.

  You can always try 4.7 and if you don't like it uninstall and reinstall 4.3

• What is the difference between a triangle wave, waveform of the triangle and the triangle pattern

  To generate a waveform of triangle, I have 3 vi I could use. Signal Processing-> generation of signals-> Triangle wave.vi, Signal-> signal generation processing-> Triangle Pattern.vi, programming-> wave->-> generation of waveform analog waveform-> Triangle waveform.vi.

  What is the fundamental difference between these 3. I understand that all 3 have a different set of entry and I can use them according to what combination of input data that I have. Are there any special cases for which each is used?

  You should get really understand DAQ and the difference between the data types. When you create a waveform data type, the data type includes timing information. For the acquisition of data the most important is the dt or the time between samples. You have configured the DAQ Assistant to use this information to generate the waveform. When you create the table 1 d, obviously it cannot contain information of timing and when you convert dynamic data, all you will get is a default dt 1.

  As indicated, you can use either feature, if you create the table 1 d, you will need to change the data to add to the dt you want.

  Look inside the basic function generator. It uses the lower level of triangular-wave function, you already mentioned. See how the timing information is added to the output of table D 1.

• What is the difference between 6.5.1 and 6.5?

  Hello

  Does anyone know what is the difference between 6.5.1 and 6.5 and the difference between 6.5 and 6.4? Thank you.

  Find out what new sections of:

  VMware vCenter Server Heartbeat 6.5 Update 1 Release Notes

  VMware vCenter Server Heartbeat 6.5 Release Notes

• the difference between the intermediate process and materials first in BCP formulation?

  I do not understand the difference between the intermediate process and materials first in BCP formulation. could you give me an example to show the difference?

  The intermediate process - questions all the specifications that are used in the

  current specification.

  Raw - questioned the level of material first in the hierarchy.

  Hello Terry,

  It is used in the screen output Formulation based PCA. You can configure different PCA rule which is available in formulating exit point BOM, then when you start a screen of PCA in the base of the exit, you will see this rule.

  And the difference between the intermediate process and raw in PCA, let me explain with an example, I have a configuration hierarchy as below:

  OutputA

  A formulation

  Material X

  Output B

  Formula B

  Material M

  Material N

  If I select the output B in formulating A framework, and when I run a screen of PCA in the base of the output, I have three options:

  High level - it allows to extract A output attributes as PCA review the settings;

  Intermediate processes - it to retrieve attributes material X and B output like BCP review the settings;

  Raw - it will extract attributes of material X, output B, M and N of material material as PCA review the settings.

  I hope this helps.

  Thank you

  Jessie

• Differences between the ADF and ADF toolbar buttons

  I can't seem to find an answer to this question apparently simple so I hope someone can shed some light on this for me. What is the difference between a toolbar of ADF and an ADF button and when should you use against each other?

  partialSubmit is set to false by default for a commandToolbar button and his first made be used inside a toolbar.

  http://vtkrishn.com/2010/05/06/difference-between-commandtoolbarbutton-and-CommandButton/
  Difference between CommandButton and CommandToolbarButton? (Loading Popup)

• Find the difference between two date and time

  Hi friends,
  
  I wanted to find the difference between two date and time, but my qury is slightest error "invalid number."
  
  

  select sql_step_num,proc_name,run_seqno,start_date,end_date,(to_char(start_date,'HH24-MI-SS') - to_char(end_date,'HH24-MI-SS') ) as ed  
  from eval.EVAL_RUNTIME_DETAILS
  where trunc(start_date) = trunc(sysdate) 
  order by sql_step_num;

  You try to get the feel between two char strings.
  And more difference between two dates gives a NUMBER of days.
  Try this:

  select sql_step_num,proc_name,run_seqno,start_date,end_date,numtodsinterval(end_date-start_date,'DAY') as ed
  from eval.EVAL_RUNTIME_DETAILS
  where trunc(start_date) = trunc(sysdate)
  order by sql_step_num;
  

• Difference between ESA and ACO export of color in Photoshop

  What is the difference between ESA and ACO export of color in Photoshop?

  I want to use these colors in Captivate.

  Thank you.

  This explains the differences: creating and sharing color swatches in Adobe

• How to calibrate the screens of Adobe products? For the most part, I'll use Illustrator and Photoshop.Can someone make a difference between the calibration and the Hardware calibration software using (Spider)? Thank you.

  How to calibrate the screens of Adobe products? I will mostly use Illustrator and Photoshop.Can make all the difference between calibration and the Hardware calibration software using (Spider)? Thank you.

  I use U2415 from Dell.

  I use the Spyder Pro 4. The process is quite simple - install the software, plug the Spyder and follow the steps listed in the program. I would recommend also, install the latest version of the software directly from the site of Datacolor instead to install from the disc supplied (probably outdated).

  Benjamin

• What is the difference between firefox for os android and firefox

  Difference between bones of firefox and firefox for android

  Firefox for Android is a version of Firefox that works on a wide range of Android devices. It follows the design by Google guidelines and can synchronize data with desktop installations of Firefox.

  You can read more about Firefox for Android here: https://www.mozilla.org/firefox/android/

  BONES of Firefox is a new mobile operating system which is usually installed on less expensive phones. He manages the types of tasks that Android runs on phones Android and tablets, but has a new design. He is still young and may not be suitable for power users.

  You can learn more about FirefoxOS here: https://www.mozilla.org/firefox/os/2.0/