ReadyNas 104 web inaccessible gui

Similar Questions

• Different versions of ReadyCloud on ReadyNas 104 6.5.0

  I have two ReadyNAS 104
  Both recently upgraded to 6.5.0

  A while back I accidentally disabled ReadyCloud on the first and then added new - then after that was to connect to the admin Pages using the 'admin' instead of the main user account account. This works even when am so Ok with it.

  Since the upgrade to 6.5.0 - I need to use the account "admin" on both.

  Now, go to the 'Cloud' of these two tab - ReadyCloud option seems to be significantly different on both. Key settings also gived options.

  Not a big issue that I don't use much, but thought I would check why it is.

  Older machine (ReadyCloud disabled + add):

  

  Parameters:

  

  New box:

  

  Parameters:

  

  Thoughts?

  Clear the cache of your web browser, close your web browser and then reopen the web administration interface. The admin web UI should then display correctly with both systems.

• Server error ReadyNas 104 and plexmedia

  I recently bought this ReadyNas 104 and install the server software Plexmedia. It was working fine.

  Then I got new disks and decided to build a new system.

  When I looked at the app was now lack of Apps, I downloaded plexmediaserver-ros6-binary - annapurna_1.0.3.2461 - 35f0caa_armel.deb

  The following is the error I get when trying to run this application installed. Activation/deactivation of the service then nothing

  very weird but it worked before, any ideas.

  Sven has soon

  The RN104 is not a unit of Annapurna.

  The RN104 uses other armel package. It should have been clear when downloading from plex.tv/downloads

• Monitoring of ReadyNAS on ReadyNAS 104

  IM using a ReadyNAS 104 and want to use to record the flow of our surveillance cameras. Unfortunately application of monitoring ReadyNAS does not supports more of a camera and recording on motion that makes it completely useless for my application. Is it possible to purchase a license to get a record on motion works on a series of 100 ReadyNAS or is it simply not supported?

  A little off topic, but I finally got the camera to record directly on a ReadyNAS share. All I had to do was setting a quota for such action and finally formatting worked. What the camera calls of formatting are actually create some files binary index and a bunch of zero-byte files hivXXXXX.mp4 which then slowly getting filled with video data.

• How long does it take to extend a volume on a ReadyNAS 104

  Hello

  I have a ReadyNAS 104 that I had started to use with a single disc in it, a red WD 4 TB. However as it was close to capacity I had an another Red WD 4 TB to extend the volume on the.

  It took some time (about 12 hours) for the drive to become ready. To increase the volume and use the two discs, I understand that I had to reboot the ReadyNAS. So I did, but since the display said "restart now. See you soon. »

  Have been led to believe that this will take a while, if someone can give a sign of how long, because it's been 48 hours and I am concerened that something is wrong.

  Currently I'm unable to access the ReadyNAS on the network, obviously I guess as it is still starting, so unable to confirm indeed if he does something.

  Thank you

  It seems awfully long for me, and should be able to see RAIDar.

• ReadyNAS 104 lock, caused by the option of bit rot?

  Hello

  I recently bought a ReadyNas 104, I updated the OS to 6.2.5 but I this gel NAS which often and the only way is to pull the power plug.

  After many trials, I think that I have a system stable but only because I have disabled "bit rot" options for all actions. I don't mind that little rot slows down the NAS, but I fear that the only way out is by pulling on the power cord because noting unresponsive.

  Thanks in advace.

  So far the days I have no blockages.

  The 2 things I did was to disable the "virus scanner" and disable all 'protection rot '.

• ReadyNAS 104 does not start. Out_of_memory error 354. After the upgrade to 6.4.1 #26323717

  6.4.1 installed from 6.2.5 yesterday. Everything went well. Did all the "computation". has worked well.

  No not from one day to the next with 354 out_of_memory error. now, does not start.

  I tried reinstallOS. No luck.

  totally stuck and he needs for businesses!

  You could try RO mode, see https://community.netgear.com/t5/Using-your-ReadyNAS/Readynas-104-won-t-boot-Error-354-out-of-memory...

• ReadyNAS 104 unable to boot after power failure

  Hello

  My Readynas 104 unit is in a suspended state. Power blue led continues to blink (for hours) when I restarted after a power failure. The disply screen says "READYNAS 6.4.0" and no button works. I can only remove the power cable and connect back to try again to start, but even once, he ends up in the same State of the Power LED flashes continuously.

  Device answering queries ping but actions / iSCSI and admin page not available.

  Someone of you has faced this kind of problem or can help me solve this problem without losing any data please?

  Thank you

  Hussain

  I want to contact support.

• Pass the disk from ReadyNAS 104 again ReadyNAS 104 #26210568

  I just got a replacement from the ReadyNAS 104 factory. I swapped the drives ensuring that I kept the disc # correct. However, when I start the new NAS he don't know the discs. I need to "turn up the volume. However, I fear that will erase the data. Any suggestions on what to do?

  Hello ckovel,

  When you insert the disc on another chassis that is with the same model, you must insert them all to their respective bays before initializing the NAS. NAS should display disks and volume load.

  If this is not the case, one possible reason is the chassis and the disks do not have the same version of firmware.

  You should still be able to get support for it since it is to install the replacement. It is best that you contact the helpdesk to guide you through it. Use the previous case, it can be reopened and increase if necessary.

  Kind regards

• ReadyNAS 104 to 314 #26833764

  Hiya

  I have a readynas 104 with 6 TB drives in there, I want to move to a readynas 314 to be able to use the maximum storage space

  Can I just slide my readers of the 104 in the 314 and not lose my data?

  Thank you

  Looking at your case looks like has already set and the remains to have PHP installed at one time was the problem.

• EA4500 not find Netgear ReadyNAS 104

  Just bought a Linksys EA4500-NP to replace my Linksys Wireless - G WRT54GL

  Have all the configurations works very well EXCEPT FOR Netgear ReadyNAS 104

  When I turn on the NAS I get boot error "unable to connect the server discovery.

  The WRT54GL assigned IP 192.168.1.10 to the NAS

  The assigned EA5400 IP 10.42.181.142
  Devices of will NOT handshake

  DOES ANYONE HAVE ANY SUGGESTIONS.

  All Linksys Tech Support says "call Netgear.

  Configuration of the network attached as photo

  

  jaholstein wrote:
  @chadster766: great response.

  then could I also change / force the //server be 192.168.1.10... just in case the other DHCP auto-assigns Protocol thing as 10 on the NAS? If so - would appreciate steps & screenshots. Use a DHCP reservation so the server always gets the same IP address of the DHCP server

  Oh and here I have the NAS or disable during the walk cycle for EA4500 then switch you mentioned earlier? On

  Comments above:

  

  

• ReadyNAS 104 freezes GUI, reboot (ssh) said: no space is available on the device

  I have a problem with my 104

  After one or two days the admin interface stops working and it stops performing backup jobs.

  If I can ssh into the box and do a reboot it told: "error: no space is available on the device.

  But he there ara severel GB of free space on both og / and / data

  I run the latest firmware.

  What could be wrong?

  / Jacob

  I did an OS reinstall that solved the problem

• ReadyNAS 104 reports complete disc

  Hi guys,.

  I have read this thread 16 whole page and almost feel I have to now you know.

  Anyway, it was very useful to know more about all your attempts and "beta test" I know what not to waste my time on.

  As you probably understand, I have the same problems as you.

  I have a 104 with 2x2TB and 2x4TB. The last one (I will refer to the TB 8 disc later) is the stroller one.

  The problem started when I decided to UN - rar batch 5 TB of movies. It was working perfectly until a few days ago, and now my drive is completely 'blocked '.

  I can simply write files more than a few seconds before it gives up. According to the SW in use, the error messages varies between "network drive is not accessible" to "memory" in the "network name is already in use" and so on.

  -Downloading files from the internet at 60 KB/s works for a few minutes stops with one above error messages

  -Decompression of files more also the result in an accident. It can stop after 20% or 95%, which seems random. But it never ends.

  -Copy of the files using the Explorer does not work. "The disk is full.

  -J' tried to use two different machines to Win7 and a Mac. No difference of result, but as mentioned, the error messages varies.

  -Up til these attempts I thought that it was kind of a network problem or SMB protocol problem, so I tried connecting directly to a computer using the other NETWORK card - but not to prevail.

  -Finally, I tried to move about 500 GB of the 8 TB drive (2x4tb) for the other RAID (part 4 TB of 2x2tb). I used the web interface for this operation and it worked perfectly.

  -J' have decompressed the files in the sharing of 4 TB, then prepared to move them using the web interface.

  -Who... wait what he... DID NOT WORK.

  -J' I try to drag a file to a share to another action, and the web interface starts the process of moving but give 4 seconds without error message.

  Most of this was trying to use OS 6.2. I've now upgraded to 6.2.5 but it has not changed anything.

  The share of 8TB is about 50% full and I cannot write any files of more than a few seconds before crashing.

  However, I noticed in the paper that the unit reported the '70% full' long, but just before it happened he reported that '93% ' full which is very strange that the decompression process should not increase the disk space (files had no compression, and each rar archive has been eliminated after unpacking successful).

  Windows also reported a fairly full disk, and I have not had any contact with the NAS. Also my user name and password is not valid, and I made a reappattage of the whole OS it is up and running.

  But still, the share of 8TB is now useless because I can't add all the files and I probably need to buy a new drive to store my files until this issue is resolved (I'm strongly considering buying another NAS).

  Edit: I've added a screenshot to illustrate the behavior. This example is torrent files.

  

  The volume has been fully allocated and the distribution of metadata was full.

  Via Teamviewer, I managed to change that and now a balance is running. As a balance never managed has been run on the volume until it will take some time.

  I recommend you to plan a balance to run every few weeks or if at a time when the NAS is slightly used.

• rebuilt drive ReadyNAS 104 replaced always display data degraded data

  Have a 104 - drive in slot 1 readynas failed-

  tested the new drive all tests

  replaced by model and brand

  It detects and rebuilt volume showing raid 1

  Once rebuilt still happens with degraded volume

  running latest firmware

  Have you tried restarting and once rebooted begins the rebuilding process again?

  Someone has any ideas

  Thank you

  Well I would like to back up the data to another drive if you can (do not try and replace the existing data).

  Then with only good new records in the NAS do a factory default (erases all the data, settings, everything) and restore your backup data.

• Plex Mediaserver on ReadyNAS RN202 Web site does not open

  I installed the app on the ReadyNAS RN202 mediaserver Plex. Installation went well, however when I try to open the plex website it gives me page not found or can not be displayed.

  If I try to telnet to port 32400 I can not connect.

  What can be the problem or where I watch it again?

  I installed the application through the applications from the Web site of the NAS running OS version 6.4.1 management

  I removed the RN2xx version and installed the general release version. (What is the difference between the versions? because I assume that the RN2xx is the one created specifically for this NAS solution) I was not able to open the Web page, but I found an option in the page actions called dlna.

  Once I clicked on this DLNA option and it went green I could open the page Web of Plex... Eureka :-)...

  I want to add the screenshot on this page but can't browse my pc for the image to add :-(

  This option is hidden in folders-> -> access to the network. Here I have a few buttons that I can click to enable or disable the apperantly access to this share as ftp, smb and dlna. Once I clicked on the option of dlna, it went green and I was able to browse the Web page and manage the Web server of plex...

  Thanks for the support and now it works perfectly...