LR says "photos may not be read, may not be imported. What's not here?
I installed LR6.5 for the old to the new computer. Everything seems to work, except the following: I want to import photos from a camera. LR sees the photos, but when I want to import, LR says "photos may not be read, may not be imported. What's not here?
99.999% of the time it's the LR gives error when the Destination you have chosen to copy the images has no not the permissions to read & write appropriate for your user name. You can assign permissions on this folder or choose a different destination site that has the appropriate permissions.
Tags: Photoshop Lightroom
Similar Questions
-
Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never had this problem before. Now, every time I create a layer mask, or try to work on a Photoshop freezes completely, forcing me to restart and (most of the time unless I have record EACH step) start of a scratch. Which is pretty much annoying... any suggestions?
Move on to the Discussion of Photoshop
-
Title: Hardware failure
My Dell hardware scan failed the Smart short Test and gave me an error WHD16-K8B and says 'failure may be imminent. What can I do?
Hello
1 have had any changes made on the computer before the show?
2 are you facing any problem with the hardware?
Method 1:
I suggest to see the link and try to run the troubleshooter and check if it helps.
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
See the article and check if that helps:
Diagnostics of Dell hardware
If the problem is not resolved, contact the manufacturer for additional assistance:
-
Original title: photos
If I try to crop a photo or repair, it has a message of: changes made to this photo has not been saved. The file may be read-only or you may not save to the location of the image.
They worked very well the other day, what's past?
Hi boneyardwolf,
1. where are the photos?
2. you have any third-party photo editing software?
3. what type of files you want to change?
You can check the following link and try the steps suggested by Marilyn - Support Engineer Moderator Wednesday, March 4, 2009 04:47 and see if it helps to solve the problem
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit ourMicrosoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I tried everything, every single idea. Without success! Any other idea?
For example, you specify that the device does not display the lock screen, correct? Do you use Touch IDS? If so, try to put your finger on the device to see if it's what he wants.
See you soon,.
GB
-
How can I get my fixed CD drive? Device Manager says "Driver may be corrupted or missing" B
How can I get my fixed CD drive? Device Manager says 'driver may be corrupted or missing.
But when I click on update driver it says "your driver is up to date" and refuses to fix it.
Hello:
I found this link where a person fixed a similar problem with editing the registry.
Make sure that you back up all personal files you do not lose to a portable hard drive and create a restore point by using System Restore utility first, because editing the registry might cause some problems with your PC, also do not start and you have to reinstall the operating system.
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Paul
-
My computer crashes after I installed the Netgear N600 Wireless Dual band Router WNDR3400. I uninstalled and then reinstalled, but my home computer still crashed. My detail of error says I may need to update my BIOS to 8400 has 09 but I can't seem to download the desktop to install. Any suggestion?
Hi JudyWinn,
If you need assistance for updating BIOS (Basic Input Output System), I recommend you contact the manufacturer of your computer to update the BIOS (Basic Input Output System) & check if the problem persists.
Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.
Hope the helps of information.
Please post back and we do know. -
Why my computer says "Windows Media Player cannot read the Blue Ray Disc. The disk has been created in a way that the player does not support "? I have Windows Media Player 12 and it comes a new movie. I can play other discs blue ray on this computer, but not this one. Is there an update that I'm missing or a codec I need?
Thank youThis new film format is not supported by Windows Media Player, here is a link on how to play a dvd on windows media... player and codecs...
http://windows.microsoft.com/en-us/windows7/Play-a-CD-or-DVD-in-Windows-Media-Player.
If you can not play... try using third-party codecs, but at your own risk :D
Hope this helps you :)
-
Separated from this thread.
My operating system is windows 8.1 - when using the mail application the photos appear not - it just says: photos, but the text appears. Photos open in Outlook. Can you help me?
John
Hi John,.
You might face this problem when the mail application is damaged or if it has a license problem. I suggest you to run the utility troubleshooting App from the link below. Click on the resolution of the problems of the App and run it. Check the question, if you are still having the same problem as you can follow the other steps in the link below and check if it helps.
Solve problems with a soft
http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
Let us know the status of the issue.
-
I have LR CC, about to delete the whole program. I try to process a photo that shows celluloid, says 'file was not found", try to import said:"already imported "... Until I give up fact together, someone has any ideas my obviously simple mind can grasp? I am quite proficient in photoshop, lost at sea with lightroom... Thanks in advance for clues...
It is possible that the file has been moved. It is possible, if the folder is on an external hard drive, the drive letter has changed. Without more details, it is difficult to diagnose. One thing you can try is to right click on the folder in the library module, choose the option to update the location of the folder. Then use the dialog box that appears at the point Lightroom folder.
-
I signed up for the basic acrobat reader conversion program, but he won't let me not convert PDF to Word. I looked at troubleshooting tips and how advice but after I connect it just says this is not supported and directs me back to register for the conversion program. I would rather talk to someone, but I can't find a phone number or the option for a cat. I have a PC. Any help would be appreciated.
Hi dianar30180588,
Try to use the service to export to PDF Online https://cloud.acrobat.com/exportpdf
Kind regards
Nicos -
I have a MacBook Pro (retina, 13 inches, early 2015) running OS10.11.4 with 16 GB 1867 MHz RAM DDR3 and a 500 GB SSD. Because of its size, I have my library of Photos stored on a 256 GB SSD card into the card SSD slot. I have two questions:
(1) whenever I start the Photos for the first time after a reboot my Mac "forget" where the photo library are stored, and although I've repeatedly called my "primary" I have however must always say Photos where is my library. Why is this? Is there anything we can do about it?
(2) my first question was a minor fight; It is much more important. I can't export my photo library photos. I can't export to my internal hard drive of the SS, nor it will export to the SSD card on which the library is stored. What is happening with this? What I can do about it. I'm writing this, I transfer my external library of Photos on a hard drive to see if that allows me to export. (Because my photo library is so large, it may take several hours). I strongly suspect that this won't work, however.
Is there something else I can do?
1 - What is the format of this card 256 GB SSD? Works with Photos, it must be Mac OS extended (journaled) and defined as the library of the system and must always be available before launching the pictures - if you launch Photos without her Photos will start a new library
2. we cannot see you, so you must provide details - why can not export you photos? What format is the DHM you sit down now? How it is connected to your Mac? If is used as a c backup TimeMachine = volume?
LN
-
How can I make sure that my photos are not replicated to infinity?
I have pictures 1.0.1 installed on a Macbook Pro retina end 2013 running OS X v10.10.5
I recently found a challenge with my pictures on Mac synchronization with my iPhone 6 reading here, but now I'm stumped.
I'm at my library of Photos for the first time in a while and I find that I have extra copies of many images. 5 to 8 options many images. Looking at, a large part of the Meta data is different, which can be partially, at least, due to an incident of erasure and disk recovery that I lived in 2014.
Looking through these tips, I learned what a vs a managed library referenced and determined I have a managed. I saw where, because of this, deleting photos in Photos should remove the file from the original disc. This doesn't seem to be the case.
If my photo library file and my photo files are located on an external drive, rather than the default file structure the startup disk?
It seems that eliminating extra, superfluous, copies of photos in a library of 20,000 + image could save me disk space, but going through the library, then by all records to research the Extras won't be effective.
I would like to know that the removal of a photograph of the photo library will eliminate this photo from my HARD drive. How can I ensure this?
Any ideas on that?
Is it possible that you have more than one library of Photos?
Let's say I photo library 'A' and the first library I have ever created. I then turn on iCloud library ensure those sync up to my iCloud account.
If I have more than one library of Photos, and I called photo library 'B' as system photo library, it will turn off the iCloud Photo library feature.
If I go to turn on iCloud photo after photo library 'B' new photo system library, images already synced up my iCloud account of photo library 'A' will merge with the 'B' photo library and may be what is happening here.
-
I've upgraded to the latest version of Firefox, but I always get a message on my home page that says "you are not on the latest version of Firefox. Update today to get the best of the Web! »
You can see this message under the Google search box on www.google.com/firefox which is the old default Firefox homepage. It seems that this page is no longer maintained by Google. You seem to have the latest version of Firefox.
If you want as the Google search page as homepage, change your homepage to Subject: House (a new version of the old homepage Google/Firefox update is now integrated into Firefox).
Also see-> https://support.mozilla.com/en-US/kb/Finding+your+Firefox+version
You can also see your version on the help > troubleshooting information displayIf this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update if necessary:
- Plugin check-> http://www.mozilla.org/en-US/plugincheck/
- Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
- Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
- Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
- Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox
-
Windows Photo Gallery can't edit this photo because it is read-only.
OK I transferred photos from my iPhone to the computer, tried to edit photos and said its read-only when I went into the properties of the file and changed I still had the same problem, I tried to change the option ReadOnly several times without success. Help, please
This folder are the files stored in (the full path name)?
It is probably a permissions problem with - with the file or folder (or one of its parent folders). You want to give yourself full rights and/or to take ownership of the file/folder.
To view your permissions, right-click on the file/folder, click Properties, and check the Security tab. Check the permissions you have by clicking on your user name (or group of users). Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions. You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).) Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.
To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights. Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab. Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK. Back and now there is a new owner for files and folders/player who can change the required permissions. You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner). You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.) Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.
Good luck and I hope this helps!
If this does not resolve the problem, please repost your question in images and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where people who specialize in photography questions will be more than happy to help you with your problem.
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
photos of iCloud devours my iPhone 16GB storage
Hello I have something like 60 GB of photos in my MBP. I went to iCloud photos, paid for extra storage in iCloud and activate iCloud library in my pretty phone 16 GB. I turn on "optimize iPhone storage." Now, once I open the Photos app, she eat all m
-
Garmin does not connect after upgrade 9.3.2
I have a Garmin Frontrunner 235, which connects to my iPhone (5 s) via Bluetooth. It all worked perfectly until I upgraded my 5s to iOS 9.3.2 recently. Now the phone sometimes cannot 'see' the favourite, and even when he can, he refuses to connect.
-
t:6036 / c:4110 error messages I tried everything that was suggested. Silverlight plug inn works well I did controls & can see the ball spinning & message. Safari has checked everything that must come from what I said & mac has all the compatible req
-
Is there a difference to install a language pack vs install the OS in this language?
Language Packs vs OS install Is there a difference to install a language pack vs install the OS in this language? I got the task to set up a foreign operating system. Example of German form. Is there a difference to install the German language on an
-
Has anyone caught in a loop of disconnection when you try to open a session?
And everyone had to deal with Adobe Creative customer service cloud in India and has endured really unacceptable interaction? I have a problem with my account does not let me login, which is strange because I can login here to post on the forums. I g