LR5 communicates only with PSCC 2014. I tried different remedies. What to do next?

Similar Questions

• Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

  Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

  Hello.

  Today, I had the opportunity to work with a user of Muse with the same problem after you perform the troubleshooting steps in the post above we decided to communicate with the host.

  Later, I learned to know that host IP of the user of Muse and they managed to unlock and muse began to connect to the FTP host.

  I have another host scenario suggests Muse to add user : 21 to the FTP address and then Muse was able to connect.

  For example ftp.domain.com:21

  Please try the suggestion 2 above and let me know if it works.

  Concerning

  Vivek

• (Redirected) V525w printer communicates only with the PC

  Printer can do test page, photocopy, but nothing print Word, Open Office, mail I've been online for two hours with Dell support who tried "everything" without success. I tried to change the USB cord but no help. To complicate matters, I can't find the installation CD. This problem occurred from one day to the next day - a day fine, the next day I couldn't print. Thank you for your suggestions.

  Best of this post in the Forum of devices/printers, here:

  http://en.community.Dell.com/forums/3528.aspx

  Bev.

• HP Officejet 4620: portable printer communicates only with the computer

  Last home had this printer set up under the name of wireless. lost connection cables so had to buy a new one. Printer goes and copies, scans, etc. Have unplugged, said prayers, and still it wont connect. Just bought new cartridges so you don't want to throw it out the window right away!

  Document is the printer online. Mark Exclamination (troubleshooting) appears on the printer control panel

  Hi @chaloupay,

  I'd love to help you with your Officejet 4620! Thank you for taking the time to post in the Forums of HP.

  I understand that you were able to print until recently, and now you see an exclamation point on the screen of the printer. Performing printing and Scan doctor could help. HP printing and doctor Scan is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to find that the key and the box are both in a green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

• If you see a red X (), follow the onscreen instructions to fix the problem.

Please let me know if that solves the problem, or if you need assistance. In fact, if this helps you to find a solution, please click on the button "Accept as Solution" down below in this message.

Thanks, I look forward to hearing back on your part.

• Thunderbird communicates only with servers?

  I use Thunderbird 24.6.0 on a Sony Vaio with Windows 7. Everything worked along smoothly until about a week ago. One night, I used Thunderbird to check my e-mail from Comcast (as I did for years) and everything was normal. The next day, worked in Thunderbird. When I open Thunderbird, it says "Connecting to < email server >"... and nothing ever happens. I use this as my main account email account, so I don't usually open Thunderbird every day, so I have not messed with it again since then. Today I decided to try again and nothing has changed: it says "connecting" but never connects to receive my email. I tried to send an email as a test and got the message, "the message could not." not sent because the connection to the smtp.comcast.net failed I went to the Comcast website to check all my settings and checked them in Thunderbird. I noticed that my account in Thunderbird was introduced as POP and Comcast recommend IMAP so I tried changing it to that, but nothing works.

  I don't know if this means something important or not, but if I go to Account Settings-> Actions-> account and click on get a new account, I get a message that says: "sorry - we are unable to communicate with our server subscription. Please check your connection. "This reminds me of Thunderbird just cannot communicate with the internet at all, and I have no idea why this would be the case (especially since nothing has changed in the interval between when Thunderbird last worked normally and when it started).

  I can access my e-mail through my phone, and Comcast web mail is certainly not a problem with my email account. Any help would be greatly appreciated. Thank you.

  Yes, Matt, I was frustrated. I'm sorry, but it's frustrating when your email suddenly stops working without obvious reason why. Only, I posted here when, after a week, he doesn't always work and any troubleshooting that I helped him. All my Comcast server settings were correct. My firewall doesn't seem to be the problem. I only started to tinker around with settings of the server as a last resort when nothing else has worked, and then who still made no difference (because I was correct and as indicated previously, you cannot exchange a POP IMAP account - AND it wouldn't let me create a new account, because he says that it could not connect).

  As I mentioned above, I didn't know that my version of Thunderbird is so old and obsolete and Thunderbird did not tell me that is. He said even she was aware and that he wouldn't do an automatic update. After update it the other night, nothing seemed to be different because it has expired always all telling him ' connection to...» ». However, this morning, it downloaded my mail. I brought no further changes - everything is as it was when my last message, but now it seems again to communicate with mail servers. I still don't understand, but fine, it works. Oh, and Yes, my modem is provided by Comcast. I'll go look for exactly what model is if my problem comes back.

  I apologize for my frustration with the situation, but I appreciate your response and your help.

  Megan

• E2500 router communicates only with HP printer cable.

  I have a HP color LaserJet 2605dn printer and router e2500. I decided to run an Ethernet cable from the router to the printer instead of via the USB port of the laptop that works fine for a couple of years.

  Is the green light on the router would be flashing quick or light yellow on the printer. Guess there is a communication problem. After some reading material at random on Web sites and messages, I manually changed the IP address of the printer: 192.168.1.110 (that is outside the range of the DHCP users (6) quantity, which starts at 192.168.1.100)

  Leave the configuration window Panel > devices Printers & I added a new "Standard TCP/IP Port" to match the one I put manually (192.168.1.110).

  I varied results when I ping this new IP address while that the yellow light on the Ethernet port on the printer flashes quickly. Sometimes I will have 4 packets that have been sent in the ping also received, sometimes none are received, sometimes 1 and sometimes 2 packets are received. For example, ping results are contradictory and I don't know why that should be.

  I guess that none of my configurations 'Basic Wireless Settings' and "Wireless Security" have an impact here. After all, I'm trying only to communicate with my printer wirelessly via my laptop to the printer via a network cable. Also, I'm not a very technical person. I managed to get this far, but I'm at a loss for what keeps my router to communicate with the printer of mine. Any help would be appreciated. Thank you.

  Using the printer management page, make sure you on the JetDirect Automatic for networking information. If your automatic support of networking, it must acquire an IP address from the router if the LAN cable is in good working condition. Make a print on the printer configuration page to see what IP address it acquired from the router.

  If you decide you want to put a static IP address on the printer, make sure you on the JetDirect information
  Manual and instead use 192.168.1.110 tends in the poole DHCP address, try using 192.168.1.26. You will need configure the printer driver in windows accordingly to point to the IP address.

• Destjet F4480 communicates only with the computer

  This printer will not communicate with my new computer since we changed to 8.1. We have tried everything, my computer says now HP is there, but nothing will print.

  Bev73,

  Its possible you have some print jobs stuck in your queue, here's a link to a document that could help

  http://support.HP.com/us-en/document/c02205477

• Render.LY extension works only with Photoshop 2014.2.2

  I used the Render.ly (http://render.ly/#watch_video) extension with the previous version of Photoshop that was 14.2, but since I updated to 2014.2.2, the extension will not be installed the extension only supports the version 14.2 to 14.9 saying. I really want to start using this extension again. All solutions?

  Thank you in anticipation of that!

  Photoshop has changed in Flash for HTML5 for their extensions in 2014.2.2 so this extension will not work until you get an update for 2014.

  You can continue to use the old with Photoshop CC v 14 until you get this update.

• HP Pavilion a6600f desktop PC communicates only with the monitor

  Our bureau a6600f HP Pavilion PC (with OS 64 - bit Windows Vista) has stopped communicating with his monitor.

  The start process seems to work for 7-8 seconds before stopping.  We can hear the fans and CD unit turn during this period.  There is no warning beeps.

  We went from monitors to exclude a monitor problem. Both have two monitors, that we have given to the case put off until the boot process - which may indicate no comments received.

  We tried to reset the BIOS blindly in accordance with the instructions provided for elsewhere in this forum.  We also tried to boot from a CD without success.  Please notify.

  Once the boot sequence was not even initializing, I realized, I discovered the solution.  A simple search online for 'black screen' and 'no boot' leads to results multiple problems related to the integrated NVIDIA gpu chip.

  The chip is apparently subject to overheating to the point where its connective solder may melt and break its link with the motherboard.  This issue mainly comes in laptops because of the sealed enclosure, but it has been reported also occur in models of office such as ours.

  This broken link results in a black screen and an inability to boot into the BIOS.  Several of these instances have been diagnosed wrongly that the motherboards 'failed '.  Fortunately, there's a fix called "reinvest."   It comes down to warm up the chip gpu to the point where his welding redéroule reconnect the loose pins.

  Some repair shops are fully aware of this problem and offer to repair it for about $80 at present.  Some DIY Laptop owners have also posted videos online in order to document how they have reorganized their own chips using a variety of means.

  I decided to take the road of this last, warm our chip NVIDIA gpu with a heat gun using a heat shield to protect surrounding components of the motherboard.  My attempt to reflow works perfectly, so I handed in thermal sinks the gpu with some thermal paste expenses place to finish the job.

  To summarize the question, our desktop HP Pavilion a6600f PC lost communication with his chip gpu NVIDIA Geforce 7100 integrated due to the chip overheat and melt its connective solder.  This broken link compromised the ability of the motherboard to initialize its startup sequence, which gives no output to the screen, resulting in a screen empty.  A new graphics card does not resolve the issue, given that the motherboard was inoperative because of the connective issue with the gpu chip built-in.  Reinvest the gpu chip has solved the problem.

  PROBLEM SOLVED!

• External DMM communicates only with the LabVIEW executables

  Hello

  I currently have a system of power supplies connected with GPIB and an Agilent E34405A DMM connected via USB.  The system works fine when I use the complete Labview program, but when I make an executable and installler and put it on another machine, that I can not get the DMM communicate the work of supplies of power very well and done my other equipment.  Any thoughts?

  If your program LabVIEW use NI-VISA, you need to charge NI-VISA run-time on the target computer.

• SJ G4010 communicates only with the HP scanning software

  Now, I have the same problem as others.  I am running win xp pro.

  I have uninstalled/reinstalled the software (HP Solution Center) because I wasn't able to scan from Corel Presentations, I could do with my old HP scanning 4470c SJ.

  Now, when I try to open HP Solution Center's, I get the following message:

  "No HP devices have been detected.  HP Solutions Center's will be closed

  When I try to acquire an image from the scanner when I'm in HP PhotoSmart first or in Corel presentation I get this message:

  "Unable to communicate with HP scanning software. Please check that it has been installed and working properly.  If the problem persists please closed your application and try again. »

  Of course, it does not solve the problem.

  After this error message I get an additional error in HP PhotoSmart first stating:

  'Invalid Twain State'.

  It is interesting I can scan from in MS Paint and also MS multimedia library of MS Office 2007, which means that the scanner works.  I can also use the scanner with MS scanner and Camera Wizard.  The problem seems to be in the inability of the HP software to detect the scanner.

  Any ideas?

  OS - win xp pro sp3

  This blog has solved my problem of communication between the HP and my G4010 scanner solution Center:

  http://hpanswers.blogspot.com/2007/12/no-HP-devices-detected-HP-solution.html

  The solution is to download the latest software on the HP ftp site and rub all the residual Scanner HP program remains on your hard drive or your registry before attempting to reinstall.

  Still can not sweep of Corel Presentations as I used to with my old SJ deceased 4470c but it's just a minor irritant compared to what I went through to fix this.

• PSC 1510 communicates only with the new update to win and the new HP software.

  PSC 1510 does not communicate with the new upgrade to Windows 7 and the new HP solutions software. However, I am able to print from the PC. I've uninstalled and reinstalled twice and downloaded the Win 7 patch.

  All thoughts.

  PC Wizard

  See the thread for: Missing fie for instalation--C:\Windows\system32\HPZidr12.dll for resolution.

  Thanks for your help,

  Connie

• TestStand communicates only with labview

  Hi all

  I use 2012 Teststand and Labview 2012 SP1. I use Testsequence calling developed Codemodules usnig Labview 2012.

  Question 1: When I call the main sequence code modules was not called. But when I sperately run the VI (besides it's simple, DMM vi) the VI was running perfectly.

  solution:-open the tab configuration and selected LabVIEW and selected adapters. After that obtaining in that we chose Runtime Engine to motor development.

  With this, the issue got sorted on why is this behavior happened.

  Please let me know if anyone knows or in front of the same type of problem.

  Hello

  I have recently experienced problems with TestStand and LabVIEW code modules, finally I found linked below white paper, which can also be useful for you:

  http://www.NI.com/white-paper/9923/en/

  In order to understand what is the cause, I have a few questions below:

  Having developed this VI or is it a real VI from the NI-DMM palette?

  If you open the VI in the LabVIEW development system and select the file-> properties VI, is version 12.0 indeed?

  The VI uses no control or Subvi, so then, what are these and also they are stored in libraries?

  If you build a project with your VI, create an executable, done this successfully executed? (Some properties and functions are not supported on the runtime incompatibility may be found here).

  Best regards

  Ed

• Cable Dell AIO 962 printer USB communicates only with my 64-bit Windows 7 PCs

  I feel I've done everything I can to get my dell AIO 962 Printer to work on my 64-bit windows computer 7. I even bought another thought of UBS cable that could be the solution. I have the compatible driver download and when he invites me to connect the USB cable from the printer to the computer, and I don't... Nothing is happening and I'm not able to complete the driver installation. Help please!

  Rick,

  So I uninstalled IE11. Then I tried to reinstall the driver, but when he says to plug the USB cable into the computer, there was still no communication between the printer and the computer.

• HP Photosmart C3180 communicates only with the PCs after the storm of lighting

  
  

  Dear Gordon thank you very much for the reply. You just confirmed my own conclusion that my machine is broken. It lasted 6 years and it could be another 6 If the lighting is not it. I don't mind on the cost of buying a replacement, which is not high after all, but it's sad to not be able to just fix the broken printer and make it feasible again... In addition I will lose the recently bought inks (which encrypted under the all-in-one machine to a single entry). However I will continue to use for photocopying and printing using an SD card that finished inks and then buy another machine... The analysis will be a problem, but I'm going to use my camera to capture what I have in electronic form best regards