PV124T and 2012 Windows

Similar Questions

• Help! Window 2008 server R2 and R2 2012 window server time synchronize the difference

  Hello Sir/Madam,

  Help! I have a pair of window Server 2008 R2 and a pair of window Server R2 2012, who are the synchronization of time to one destination.

  After that time synchronization is successful, the window Server 2008 R2 clocks are still 1 second faster than those in the 2012 window servers.

  Is there anyone who got the same problem as me?

  Thank you.

  Kind regards
  Samuel

  Please post your query to:

  https://social.technet.Microsoft.com/forums/

  Server issues are better addressed there.

• An error occurred while the suspension the 2012 Windows R2 VMS on ESX 5.1 update 1 and ESXi5.0 Udpate3. Can someone help me what is the reason for that and how to fix this?

  An error occurred while the suspension the 2012 Windows R2 VMS on ESX 5.1 update 1 and ESXi5.0 Udpate3. Can someone help me what is the reason for that and how to fix this?

  This issue has been resolved with the article below

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2015181

• Fact R2 support Windows standard server 2012 (Windows server 2012 ROK Standard 2CPU/VM) license?

  Original title: licenses

  Hello

  I installed Windows server 2012 standard R2 and for Windows server 2012 ROK Standard license 2CPU/VM.

  Windows has not activated this license.

  Fact R2 support Windows standard server 2012 (Windows server 2012 ROK Standard 2CPU/VM) license?

  Thanks in advance!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• What can I do to download and install Windows updates?

  All the his older ansewers like vista is really corrupt!

  I had to reinstall Windows Vista Home Premieum and now cannot get the Windows Up.date

  to install?

  Also for a few days I could just get online was in Safe Mode.

  At least with the restart of the instalion disc, I can open windows vista normally.

  Just can not update and install Windows Update

  Windows Update error 80070003

  May give it a try because it will not harm you in any way.

  http://windowshelp.Microsoft.com/Windows/en-us/help/dc8636cd-4742-4e4e-B07C-a8cc9c684b261033.mspx>

  http://support.Microsoft.com/kb/942967>

  UTC/GMT is 02:08 Wednesday, October 17, 2012

• Reattach the EqualLogic iSCSI for 2012 Windows volumes

  Hello

  We use EqualLogic, Windows 2008R2, HIT and initiator iSCSI access volumes. Now I'm re - install OS to Windows 2012. All materials, IP addresses, volumes, host name will be the same on the new operating system. BONES of some changes. Will it be the right way to remap the iSCSI volumes to the new operating system:

  1. on windows 2008 R2 take the volume offline in the disk management console.
  2. disconnect "Discovered targets" in the Windows iSCSI initiator.
  3 collect volumes offline in Manager Dell EqualLogic Group (to restore the connections).
  4. the new 2012 Windows Installer 4.5 HIT and set (is this version of the correct software for Windows 2012?)
  5 activate the volumes in the Dell EqualLogic Group Manager.
  6. Discovery target and connect to targets.
  7 collect volumes online in the OS disk management console.

  These steps are correct?
  Are they all necessary?
  Is a correct software 4.5 for windows 2012 HIT?

  Thank you

  Re: connections.  Are you referring to the iSCSI to table sessions?   If so, those are dynamic.  When you stop they will disappear.

  If everything is the same, so technically Yes.  Shutdown, you can reload and bring it to the top.

• Problem with OpenManage on a T300 with R2 2012 Windows

  When I install OpenManage on a PowerEdge T300 with R2 2012 Windows and it is originally a 'limited' warning of network connectivity and connection to the gateway is lost. I have to run a network card 'repair' every time that the alert go away and the restored network connection. Even after a reboot, I still have to run the repair. When I uninstall OMSA network card works fine. I tried OMSA version 7.3, 7.4, 7.4.0.2, 8.1. The matrix of compatibility on the Dell site seems to show that it should be compatible with 8.1 and 7.4 (on a T300 with 2012 R2). Our network card is a Broadcom NetXtreme Gigabit (version 17.0.0.3 driver). Everyone knows about this problem? I come to a legacy version, although compatibility documentation does not appear 2012 R2 as as operating system supported?

  Tstout21,

  The problem you are having sounds like an updated version of firmware on the network card. I suggest you uninstall OMSA, then restart and update the network map. Although the update of the firmware should fix, I suggest that we update the driver as well up-to-date. You can not the driver and firmware here. After completing the updates, restart and go forward then reinstall OMSA.

  Let me know how it goes.

• [MOVED] Update McAfee blocks access to the AOL software and software window Internet Explorer

  UPDATED July 2,2012
  Update antivirus software McAfee (McAfee software provided when I bought this Dell computer)
  It's so I can't connect to Internet after reboot
  with cable broadband from AOL or Windows Internet Explorer software on
  Windows 7. Programs are not blocked the McAfee software programs
  complete access... It seems that just programs cannot "find" the modem broadband
  in Windows 7 professional OS after your update... The other weird thing is
  The accuweather by Dell can access the Internet and produce of the time, date and
  weather on my monitor. I disabled the wireless connection that
  is integrated into the motherboard of Dell. I also tried to reinstall the modem
  (AT & T - Motorola 2210 Modem) software from the original CD but I get the message there is no 64
  driver bits. I had to use a restore five times point to eliminate the five
  try to update your software... What makes the limited Mcafee anti-virus software
  utility, since it can be is more updated. Virtual Technician of McAfee said that he is
  nothing wrong. Of course when the McAfee service is updated I can't chat on the
  NET with McAfee technicians ' sr since I can't access the Internet.
  McAfee technicians have no idea what is the problem.
   
  Windows says I have the latest driver upfdste for the Broadcom Gigbtye Ehternet, who manages the modem.
   

   

  I worked hard on this for so long and McAfee still blocking access to the Internet if I update definitions so to restart so I removed a second time. I installed the program software Antivirus malware from Windows and the Windows Firewall, which turns on automatically when you remove McAfee.  Intel took a horrible investment decision buy McAfee.

• DELL PowerEdge T710 support for 2012 Windows

  Hello

  I was reading this document on the support Windows 2012:

  http://en.community.Dell.com/TechCenter/OS-applications/w/wiki/4149.Dell-PowerEdge-server-support-for-Windows-Server-2012-and-its-features.aspx

  If I understand correctly T710 is supported for the installation of Windows 2012 as:

  Support Dell - qualified.

  And 'X' means that the long-term 2012 Windows: error memory consumed, Collaborative processor performance counters, logic processor idling, compatible device name are not supported on this server. Only SR-IOV future is supported?

  Thank you

  That is right.  Consumed memory error, the processor performance counters Collaborative, idling logical processor and compatible device Naming are only available on generation servers 12.   Server 2012 will take place on the T710.

  Kind regards

• The Dell R710 server upgrade to R2 2012 Windows

  Question for the forum:

  I have a Dell R710 server.  There a PERC 6 / i RAID card in there.  There are discs 5 x 2 TB on the PERC 6 / I configured in RAID-5 right now with the 6th disc as a 480 GB SSD.   I currently own WINDOWS 2012 R2 installed.   Windows 2012 sees the TB 5 x 2 as a 7.27 TB HDD and the 480 GB SSD as a second hard drive.

  I heard the Windows 2012 R2 storage solution is best.  I want to convert the TB 5 x 2 hard drives just so R2 2012 Windows can control it.  I have the following questions:

  1. What do I have to go in PERC 6 / I controller and remove the RAID 5 and create a virtual disk for each 2 TB as a RAID-0 disk drive so that Windows can see each as separate hard drive?

  2. each of the 2 TB is a SATA II drive.  PERC 6 / I can only support up to 2 TB to 3 Gbps.  What is the best way to do it?  Can I upgrade to SATA III drives or 6 Gbps?  This server which will support at all?  I have

  3. If I install a SATA III controller in the PCIe slot, how can I plug SATA III drives to the card.  All drives are connected to the server to forward now.

  4 If a disk fails, Dell R710 will still flash light orange on the forehead to show what defective hard drives?  People still hot to swap the drive?

  5. Windows 2012 R2 will be able to tell what defective hard drives?  With 5 x 2 to for the storage and 480 GB put in place in the SSD for tiered storage, which is the best way to configure it for performance?  Simple volume or mirror?  How many drives can fail until Windows cannot recover from the failure?

  Please advise on the best way to convert more software raid WINDOWS 2012 R2.  Thanks for the help in advance!

  1. This is the only way to make available to Windows as separate disks, as the PERC 6 does not support the RAID/JBOD.

  2. the PERC 6 supports a maximum drive size of 2 TB. The material is limited to 3 Gbps. You can use 6 GB/s drives, but they will operate as discs 3 Gbps.

  3. you will need to connect a cable from the backplane to the new controller, instead of the 6 PERC. Backplane may not support 6 GB/s speed, if you plug a controller 6Gbps 6Gbps drives and they bind upward to 3 Gbps, that is why.

  4. Yes.

  5. Yes. How can fail depends on how you have set it up and how much data is there.

• Unable to get R2 2012 Windows Installer

  I have configured the RAID and R2 2012 Windows Setup detects.

  However, when I select the drive, you receive the following error message:

  "We could not create a partition or create an existing one."

  BIOS version: 2.0.19

  Any ideas?

  I managed to solve this problem by disabling the internal SD card in the BIOS.

• I ordered and paid Windows 8 DVD-backup and it has not received even after my complaint.

  Original title: order No. -: WD06391286 date:-24-11-2012

  Hi team,

  I ordered (order No. -: WD06391286 date:-24-11-2012) and paid Windows 8 download and DVD-backup and get the reception saying the DVD was send in 3 to 5 days.

  I do not have the W8 backup DVDs to date.

  It should be delivered by the retailer: but after my complaint there is no response from this side.

  arvato distribution GmbH
  Benzstraße 5-7
  33442 Herzebrock-Clarholz
  Germany

  Hope Microsoft can give them a clue.
  My mobile no.-

  My Email ID - * address email is removed from the privacy *

  Thank you best regards &,.

  Sunil Y.Patil,

  Hi Sunil,

  Thanks for posting your question in the Microsoft Community.

  I suggest you to check the status of your order information in summary of Windows command from the link:

  Summary of command Windows:

  https://www.mswos.com/

   

  I also suggest to contact ESD (Electronic Software Download) support the link:

  Electronic download Support software phone numbers:

  http://support.Microsoft.com/GP/ESD-support-phone-numbers

  I hope that the information above helps you.

• Laboratory of vSAN in 0, 00 b ability (R2 2012 Windows vCenter) Workstation

  Hello

  I'll put up a Beta RC 6 environment vSphere in Workstation 10.0.4 and want to activate VSAN.

  The configuration steps correctly to my knowledge--> only the problem is there is exactly 0, 00 b vSAN capacity available.

  My setup;

  * OCZ Revodrive 500GB SSD

  * 10.0.4 Workstation / Windows 8.1

  * vSphere 6.0 RC with 3 knots of ESXi and vCenter based windows

  * Machines virtual ESXi have 3 vDisks, 1 for ESXi and two additional VSAN.

  * extra vDisk 1 = 10 GB for the emulation of SSD (10 SSD passtrough workstation does not work out-of-the-box with the Revodrive).

  * extra vDisk 2 = 100 GB of data vSAN.

  * Detection of SSD is emulated by the parameter "SCSIx.y.virtualSSD = true".

  * vmk is active vSAN

  * cluster = vSAN licensed

  

  I also do not operate on 5.5. U2.

  Please notify

  Hello

  I actually found the guilty myself; There is a known bug with 10 (10.0.4) Workstation and R2 2012 Windows networking, I was using as a vCenter server.

  Networking has been very bug, sometimes there was a connectivity and sometimes it was not.

  See the networking of VMware Workstation 10 bug/question/problem

  (workaround e1000e failed also in 10.0.4, because he was already using this parameter for the network card)

  When you use VCSA, worked vSAN configuration

• How to me to work with Outlook 2016 and 10 windows iCloud?

  How to me to work with Outlook 2016 and 10 windows iCloud?

  1. uninstalled and reinstalled iCloud several times - no luck

  2 reinstalled Outlook 2016 - no luck

  3. the module removed and reinstalled only - no luck

  Help please... step by step would be appreciated.

  Hi xinggirl45,

  Thanks for your question.  Can you elaborate a little bit and let us know exactly what does not work?  The resources below provide some troubleshooting steps basic to work with Outlook and iCloud for Windows.

  Get help using Outlook with iCloud for Windows

  Take care.

• Winner 8,1/firefox there are tabs above and below windows. In Win 10/firefox, there is now windows below for switching windows - how can you do that now?

  n Win 8.1/firefox it were the tabs above and below windows.
  Win 10/firefox, there is now NO windows below for switching windows.
  How to you switch windows (tab groups) now?
  Windows Firefox 39.03 10

  On the first program that I started after the launch 10 new windows, I can't do what I have been doing it for years and I can not understand.

  I hate the changes of major operating system.

  plugins installed

  • Adobe PDF plugin for Firefox and Netscape 15.8.20082
  • Garmin Communicator plugin 4.1.0.0
  • GEPlugin
  • Google update
  • HPDetect
  • Deploy Script NPRuntime plugin Library for Java (TM)
  • Next-generation Java plug-in 11.40.2 for Mozilla browsers
  • Plugin to detect Nero Kwik Media.
  • Nitro PDF plugin for Firefox and Chrome
  • Shockwave Flash 18.0 r0
  • VLC Web Plugin 2.1.3 media player
  • Detector of presence of WildTangent Games App V2
  • NPWLPG

  Is the problem that the Windows task bar is hidden by the Firefox window, or that changes to the taskbar make it impossible to change the windows?

  If the taskbar are hidden by Firefox, it is possible that Firefox is in full screen mode. The F11 key toggles between full screen and normal views.

  Another potential problem is that Firefox sometimes seems to collect data of erroneous screen size of the operating system and that the window of Firefox too large. You can rename the relevant settings file to see if that helps.

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  To restore the missing bars, you can use one of the following methods to view the list of the toolbar, and then select the desired bars it:

  • Right click on a place empty on the tab bar (or the button '+')
  • Press the Alt key to activate the classic menu bar > view > toolbars
  • in customize mode > show/hide toolbars (see: Customize Firefox commands, buttons, and toolbars)

  To activate the menu bar, toolbar bookmarks or other bars, click it in the list.