lvlib way: change the path of screws included in a pilot lvlib

Similar Questions

• Dynamically change the path of the report

  Is it possible to dynamically change the path where reports are saved. TestStand 4.1.1

  Glennjammin,

  You can set a path to the specific report for any sequence that you run via the entry points of process model using the reminder of your sequence ReportOptions. It will allow you to change the current settings in the Options report (including the path) for the execution of this sequence. This allows each of your sequences have unique report options.

  If I understand your question, you want to do is exactly what is meant recall ReportOptions.

  -Jack

• Impossible to change the path for the shared virtual machines

  Hello

  as long as user root, in the Preferences menu, shared, VMs when I change the location and

  (1) push apply 1 time, the path is created in the right place on the hard drive but when I want to share a virtual machine and move toward this path, the default path is the default: / var/lib/vmware... not the one created by the menu setting.

  Cannot change the location for the shared virtual machines.

  (2) push apply several times: odd error menu

  

  OS: Linux mandriva 64

  Any ideas?  Is this a way to manually change the path in a config file?

  Best respect

  Out of work station - stop pass.
  Then edit datastores.xml - don't know where the files on Linux - I expect it be in/etc/vmware/hostd or something like that

• Change the path of the ellipse to a wavy line

  Hello

  I am tracking a logo and wanted to reach the elliptical exterior form.  I thought it might be a way to transform or change the path to a wavy line, but I don't see it here on the forum or fish around the menus... ideas?  Thank you..

  Use the zig - zag effect and check to create smooth curves.

• How 2 change the name of image, including its .xmp file?

  How 2 change the name of image, including its .xmp file?

  I suppose that if I change image file name, the file '.xmp' that accompanies it will no longer an appropriate reference to associate. Also, I guess I can just simply change the name of the image file and give its eponymous .xmp. That means, for example, if I have:

  "This1stPhotoOfJane.dng" and "This1stPhotoOfJane.xmp"

  and change their names manually:

  "JanePhoto1.dng" and "JanePhoto1.xmp"

  It would not work.

  So is the simple way to do it?

  I have a bunch of files that I forgot to name who have already gone through the raw editor and now I would like to give them a real name as opposed to a single series of numbers they currently have.

  You should be able to bridge, since by default, the file of the side car is hidden. I think he knows enough to rename both.

  Copy the image and the file in a temporary folder, rename it and check that it actually did. If I myself remember copy or film a raw file would also move or copy the file, then it would be a good time to check that as well.

• How to change the path of the Cache of the Adobe Reader manually?

  Hello

  I have a problem with one of my clients running Adobe Drive 2.1. Operatingsystem Username of the user on the Client computer Standard has been changed (MAC OSX) and Adobe Drive connects now its cache file to the old user profile folder. If I try to change it in the settings of the player, it says something like "can't be done, try again later". Think it must be a rights issue. Tried different ways with new users of the system, drive reinstllation with removal of preferences a.so. always with the same result, I can't change the path to the cache folder in the Adobe Reader, and this prevents me to connect to the cmis server. If the client cannot use the connector and the bridge to manage the connection to the cmis server - a little awkward

  I think there must be a file with the path to the cache of the Adobe Reader is hard coded, but I have not found the right file again (looked into the contents of the package of reader to Adobe via the Mac Finder). Can you give me a hint where I can find the entrance to cache-path?

  Thank you very much.

  Best regards

  Volker

  Hi LUXMEDIA,.

  To change cache path manully, please follow the steps below:

  Assuming that the original cache location is User/wear/Library/Application Support/Adobe/CS5ServiceManager/diskcache, the new cache location is User/userB/Library/Application Support/Adobe/CS5ServiceManager/diskcache

  1. quit Adobe Reader and kill CS5ServiceManager

  2 copy the files under User/wear/Library/Application Support/Adobe/CS5ServiceManager/diskcache for User/userB/Library/Application Support/Adobe/CS5ServiceManager/diskcache

  3. launch the Terminal, enter the following commands:

  CD 3.1 User/userB/Library/Application Support/Adobe/CS5ServiceManager/configuration

  3.2 ls - al

  you will see .settings file

  3.3 .settings CD

  LS 3, 4 - al

  you will see a file with the name org.eclipse.core.runtime.preferences.OSGiPreferences.11.prefs

  3.5 org.eclipse.core.runtime.preferences.OSGiPreferences.11.prefs vi

  change the value ' system/cache_location' to ' / user/UserB/Library/Application Support / Adobe / CS5ServiceManager / diskcache '

  4. relaunch Adobe Drive, go into Control Panel, you will see that the path of the cache has been updated.

  Thank you

  Today

• Change the path of the files system such as 'Music '.

  There is not a lot of space on the internal hard drive SSD in my Macbook.

  For this purpose, I'd like to keep some data types with a huge volume to another location, for example on an SD card in the slot.

  For example, I want to store my music files on the SD card instead on the internal SSD flash drive.

  Of course, I don't want to see the empty folder "~ / music" in my file structure.

  Question:
  Can I change the path ' ~ / music ' to ' / my-sd-card/Music?

  Thanks for your help.

  If you completely destroy the music folder in your startup volume/users/music folder (or the folder documents) there is a possibility another application can go get it or try to add files to it, then you should try and keep intact even if you do not plan to use or put the files into it.

  You can send a request to look in another folder for music.

  for example my iTunes on my El Capitan boot drive is mapped to watch my music in my folder shared user of Yosemite, and on another mac, it's on an external hard drive in a folder called 'music '.

  So what application do you need to do this in?

  In the case of iTunes, you can redirect the folder from the Advanced section in the iTunes preferences by clicking on 'change... '. "and navigate to the new location.

  record music from my boot drive is intact, but there is no files inside.

  

• Change the path open the initial sequence of the operator Simple of TestStand with LabVIEW Interface

  Hello

  I use an Interface with LabVIEW TestStand operator similar to the TS IO Simple example.

  But I want to change the path when you click the button open the sequence file, I want a specific path.

  Any help is apreciated.

  Kind regards

  Daniel Coelho

  Daniel, you might be interested by this Knowledge Base:

  How can I change the default directory for the open file dialog box in TestStand?

  I searched ni.com for teststand of dialog box open the file and it was the fifth or so link.

• Change the path of the file of the scanned Document

  Hi, can someone do that to me. I have a HP Deskjet 2515 all-in-one printer, I was wondering how to change the location of the file of the scanned photos or documents. Whenever I scanned a document, it was recorded on the forlder of my documents in the library. Please help me how this issue can be resolved.

  Hello

  To change the path of digital file, please see below.

  Open the wizard from HP printer > under Print, scan & Fax > scan a Photo or a Doc > advanced settings > Destination > under save location you select path

• Change the path for every 24 hours

  I need a code to vi to change the path for each new file created. The file in the path will be a new file. Please please answer me.i don has an idea.

  The pseudo-code for this is

  IF (NEW FILE IS AVAILABLE IN THE FOLDER)

  {

  PERFORM THE CALCULATION IN THE OLD FILE;

  CHANGE THE OLD FILE INTO THE NEW FILE;

  }

  ON THE OTHER

  {

  LOCATE THE NEW FILE;

  }

  Please, please make the answer.

  As well as the tutorials in the link rules mentioned, Sam notes where it says don't not to communicate directly with users.

  You're going to have these, I think:

  

  "Give me six hours to chop down a tree and I will spend the first four sharpening the axe.  -Abraham Lincoln

  Here are some free training focused mainly on LabVIEW and hardware tools to help get started.

  Training center of NOR

  NEITHER start-up

  -Hardware Basics

  -Guide of MyRIO project Essentials (a lot of good simple circuits with links to youtube events)

  -LabVEW databases

  -DAQ Application tutorials

  -CRIO Developer's guide

  Learning OR training videos resources

  Introduction to LabVIEW for 3 hours

  Introduction to LabVIEW for 6 hours
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki

• Change the path to the updates from microsoft updates vs. windows

  Fully updated, xp pro, ie8

  When you click Start, all programs, windows update, go to the updates of microsoft with the compatibility view

  which connection online for microsoft updates gets updates microsoft without compatibility view

  can I change the path for my start, all programs, windows updates to be updated from microsoft without view compatibiliy?

  Edit: have reinstalled os with a sp3 slipstreamed cd.

  Edit2: no sites are not listed in my compatibility view settings.

  There is no need to uninstall/reinstall MSE.

  1. open IE (only!) to Microsoft Update . Click change settings in the left pane. Scroll to the bottom of the page. To stop using Microsoft Update. Disable the Microsoft Update software and let me use Windows Update only (check).

  1B. Reboot for good measure.

  2. your shortcut on the start menu should now be updated to Windows . [1] use it (not the Tools menu pull-down option) to go to http://update.microsoft.com/windowsupdate. Assuming that it does NOT open in compatibility mode...

  3. "Flip" your source of default update appropriate Microsoft update by clicking on the option / link on the main page of Windows Update (IIRC).

  3B. reboot for good measure & test to see if the Microsoft Update shortcut on your Start menu will however open IE8 in compatibility view.

  PS: I don't have a WinXP box handy to test myself, but the last time I used the Microsoft Update shortcut on one of my client computers, it has not opened in compatibility view. As far as I know, MS may have changed something since then so YMMV.

  =============================================================
  [1] If you persevere with Windows Update as a source of update by default, MSE will always be 'auto-update' [even thought that Windows Update will offer more optional updates Defs] but will offer no updates to the ESM (e.g. new versions MSE) program or updates for MS Office, Silverlight, or Skype .

• RMAN duplicate grave crashes when I'm trying to change the paths of the destination

  Hello community,

  I am trying to duplicate a database of PROD for a test environment using the basic backup technique. I test the script in double and everything works fine when the paths of the database "auxiliary" (the database that I am creating) have the same paths as the basis of the 'target' (the database of production). If I change the paths, the double has failed because it does not find a backup of controlfile:

  channel ch1: from the restore backup set data file

  channel ch1: restore the control file

  channel ch1: reading of the backup piece PROD_cf_c-2175092736-20151204-0 c

  channel ch1: ORA-19870: error when restoring backup piece PROD_cf_c-2175092736-20151204-0 c

  «"ORA-19507: failed to retrieve the sequential file, handle ="PROD_cf_c-2175092736-20151204-0 c", parms ="»

  ORA-27029: skgfrtrv: sbtrestore returned error

  ORA-19511: error received from layer media manager, error text:

  < PROD_cf_c-2175092736-20151204-0 c > backup file not found in the NetBackup catalog

  This is the script that works, but if I have the same structure of directories in PROD and TEST (but this isn't a real scenario):

  run

  {

  allocate auxiliary channel ch1 device type sbt;

  Send "NB_ORA_CLIENT = xxx NB_ORA_POLICY = xxx, NB_ORA_SCHED = Full_Diario';"

  duplicate database for TEST PROD

  until 'sysdate-2/24.

  NOFILENAMECHECK;

  output channel ch1.

  }

  
  

  And this is the script that it does not work because I have the PROD and TEST different directory structure
  

  run

  {

  allocate auxiliary channel ch1 device type sbt;

  Send "NB_ORA_CLIENT = xxx NB_ORA_POLICY = xxx, NB_ORA_SCHED = Full_Diario';"

  duplicate database for TEST PROD

  until 'sysdate-2/24.

  SPFile

  control_files value ' / TEST/orabd1/ctl/control_PROD_01.ctl','/TEST/oralog1/ctl/control_PROD_02.ctl','/TEST/oralog2/ctl/control_PROD_03.ctl '

  db_file_name_convert value "/ PROD /", "/ TEST / '.

  the value log_file_name_convert "/ PROD /", "/ TEST / '.

  core_dump_dest value "/ TEST/oralog1/cdump".

  the value 'TEST' db_name

  Set diagnostic_dest ' /TEST/oralog2'

  instance_name must bring 'TEST'.

  all local_listener 'LISTENER_TEST '.

  Set log_archive_dest_1 ' LOCATION = / TEST/arch.

  the value of log_archive_dest_2 'LOCATION = NULL'

  ;

  output channel ch1.

  }
  
  

  I tried to restore a Netbackup file and it works. I try to duplicate a database when the structures of directories are identical and it works. Why it's a failure when I change the destination paths?

  Thank you!

  Marina.

  Hello

  We had a similar problem in our shop. In our case, that we never knew if she was related to Oracle or NetBackup, but we found a Bug of Oracle, so we think it was a problem with the Oracle.

  Bug 11783792  RMAN SEND command does not hold the value of the variable

  DOC - ID 11783792.8

  
  

  Rather than send 'NB_ORA_CLIENT = DCLI, NB_ORA_POLICY is BD_DC_2, NB_ORA_SCHED = Full_Diario';.

  try something like this:

  Run {}

  allocate channels ch01 type 'sbt_tape' PARMS 'ENV =(NB_ORA_CLIENT=DCLI) ";

  Send "NB_ORA_SERV =';"

  Restore settings

  output channel ch01.

  }

  Let me know if it helps.

  Kind regards

  Ferran

• Change the path to the Round Robin of the newest storage used

  Dear Experts,

  For one of our guests (on two hosts total), which is presented with two data warehouses:

  -Storage 1 (works with RoundRobin vmware)

  -Storage 2 (works with most recent used vmware)

  I need to know if I can change it so that things work and there are two VM in this data store 'storage 2'.

  All the foregoing gave two data warehouses are working with (Round Robin vmware) with host 2nd in our environment

  Please notify

  Just did on one of the used data stores. No problems.

  Just follow this Article

  VMware KB: Changing the path information for ESX ESXi hosts to access

• How to change the path to the use of the esx command line logic unit number

  Hi friends,

  We want to change the path to the lun, the scripts are there?

  Thank you.

  Check if http://www.vmware.com/support/developer/vcli/vcli41/doc/reference/vicfg-mpath.html nigra

  If you have found this information useful, please consider awarding points to 'Correct' or 'Useful'*.

• Change the path inside and outside areas in the vector mask

  Hey all lovers of the PS/CS,.

  This is probably an easy, yet, being pretty new to this, I have to ask.

  I have so this vector mask on a layer, and singing along to the Beatles I'm changing tracks on this subject. Well, what it is is a rectangle to crop a photo, nothing crazy. This rectangle is too big for my taste - so I just draw another, smaller on the inside and plan on deleting one.

  But! The second, smaller rectangle is considered to be a delicacy to take away the first (so its interior is considered to be 'black' mask-wise, that is cut out, and its outer part is 'white', which is kept in). Thus, when you remove that first, largest, the entire image will appear, except for the part that I want in the Middle, which is cut! Yes - it's the opposite of what I want.

  Now, I tried to use the path selection tool and change the fill color of the rectangle, but you can not... So, how you reverse both inside and outside of a closed path? Thanks in advance!

  Charles

  So, how you reverse both inside and outside of a closed path?

  Select the path with the tool Selection of track and in the Options bar change the path of the operations.