LWAPP lose names and appearing as the default MAC address
I had random LWAPP that were configured previously appearing as the original names as if they were just installed (APxxx:xxxx:xxxx). I know because the location field is the location of where they are, and the name of the AP group is also set to the location they are. What would cause this?
WLC = 7.0.98.0
AP = 1142n 12.4 (23 c) JA
This problem is there... it happens about 5 percent of my overall AP
Just my $.02
If your access point keeps its AP group settings and location, it does not lose its configuration...
Have you tried to restart an AP that indicates the Mac address format and see if she takes up with the correct name?
I bet that happens with the correct name...
If Yes, my money is on your APs are passing the WLC and join before the WLC has allowed the previous entry.
It makes sense on the WLC to temporarily restore a name APs if two APs join with the same name (since you can't have two APs of the same name).
I may be wrong, it can permeanently reset name, but I bet that this has to do with your AP declining and join too quickly...
Tags: Cisco Wireless
Similar Questions
-
Original title: printing problems
I am facing a problem with the printer - or maybe a computer problem. I can't pinpoint the problem. My printer (Epson Workforce 645) appears as the default on my computer, and it says 'ready', but it will not be printed. My documents will in Quebec, but after about 30 seconds, the State spends printing, error. I've tried everything. (Occasionally), it will display a test page. Any ideas?
Hi Julia,
Thanks for posting the question in the Microsoft Community!
You are unable to print and get the error message.
I imagine the frustration you feel when you are unable to print.
This can happen due to connection problems, malicious content or third-party programs.
1 have you tried all the Troubleshooting steps?
2 is the computer, or a printer attached to a domain network?
3. are you able to print from Notepad?
4. what documents do you speak?
5 is the full error message?
To check if it's because of connection problems malware content follow the steps mentioned below:
Method 1: Run the troubleshooter
See the site:
Open the printer Troubleshooter
http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter
Method 2: Scan the computer to remove all possible malicious content
See the site:
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx .
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Method 3: Clean boot
When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.
See the site:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135 .
Note: once you are done with the boot, follow step 3 in the article to restore your computer to normal startup.
Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
When I compose and send an email to my show address name and email on the screen. But when he is sent the "from:" becomes "undisclosed recipients". I have a screenshot of what I want to talk to... but don't see in this form, how send you it.
I hope you can give advice to a new user of Thunderbird.
Margaret
Oops... found the problem. My address book was called "recipients" next to my e-mail address. I edited this name to say 'Margaret Parsons' and hop my name appears in the 'From' line on my e-mails. Yes, problem solved, enough time and poking around Thunderbird... of course love this email.
Margaret
-
Hello.
Statement of the problem is very simple: Firefox won't create bookmarks.
New installation with Mint 17. New generation of PC with Asus A58M-A/USB3 motherboard, AMD A4 6300 processor 4 gig memory stick.
All Mint and Firefox packages are up to date.
A new profile has been created for the test, Firefox has been started in safemode, purged and re-installed and reset to the default values. None of these actions have contributed.
Here is the info according to the troubleshooting information in Firefox
The application databases
Name: Firefox
Version: 33.0
User Agent: Mozilla/5.0 (X 11; Ubuntu; Linux x86_64; RV:33.0) Gecko/20100101 Firefox/33.0
Windows multiprocessing: 0/1Reports of incidents for the last 3 days
All Crash reports
Extensions
Name: Mint search Enhancer
Version: 1.0
Enabled: true
ID: [email protected]Name: elegant
Version: 1.0.7
Enabled: true
ID: {46551EC9-40F0-4e47-8E18-8E5CF550CFB8}Graphics
Description of the adapter: X.Org - Gallium 0.4 on AMD ARUBA
Device ID: Gallium 0.4 on AMD ARUBA
Driver version: 3.0 Mesa 10.1.3
GPU accelerated Windows: 0/1 Basic
Vendor ID: X.Org
WebGL Renderer: X.Org - Gallium 0.4 on AMD ARUBA
windowLayerManagerRemote: false
AzureCanvasBackend: Cairo
AzureContentBackend: Cairo
AzureFallbackCanvasBackend: no
AzureSkiaAccelerated: 0Important change preferences
Browser.cache.Disk.Capacity: 358400
Browser.cache.Disk.smart_size.first_run: false
Browser.cache.frecency_experiment: 3
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20141013200257
Browser.Startup.homepage_override.buildid: 20141013200257
Browser.Startup.homepage_override.mstone: 33.0
dom.mozApps.used: true
extensions.lastAppVersion: 33.0
Media.GMP - gmpopenh264.lastUpdate: 1416067922
Media.GMP - gmpopenh264.version: 1.1
Media.GMP - manager .lastCheck: 1416067922
network.cookie.prefsMigrated: true
places. History.expiration.transient_current_max_pages: 80569
plugin.disable_full_page_plugin_for_types: application/pdf
privacy.sanitize.migrateFx3Prefs: trueImportant preferences locked
JavaScript
Incremental GC: true
Accessibility
Enabled: false
Prevent accessibility: 0Versions of the library
NSPR
The expected minimum version: 4.10.7
Version: 4.10.7NSS
The expected minimum version: 3.17.1 Basic ECC
Version: 3.17.1 Basic ECCNSSSMIME
The expected minimum version: 3.17.1 Basic ECC
Version: 3.17.1 Basic ECCNSSSSL
The expected minimum version: 3.17.1 Basic ECC
Version: 3.17.1 Basic ECCNSSUTIL
The expected minimum version: 3.17.1
Version: 3.17.1Experimental features
What other information can I give?
Thank you.
Jim
You can check for problems with the database places.sqlite file in the Firefox profile folder.
-
My wife and I use the same email. I need to change the name that appears at the beginning of an email, a common name, rather than just my name. We use our email AOL. I need to change the name on the email account AOL to make this change? or is it possible to change this in Firefox? Thanks for help.
The replacement must be made within the parameters of AOL. See the next page for instructions.
-
Vista - Windows 7 network connection. username and password is unknown.
Hello
I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.
If someone could answer this question, it would be great.
HelloMaybe this can help.Win7 when configured on the peer-to-peer network has three types of configurations of sharing.
Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.
Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
Public share = network Public (as Internet Café) in order to reduce security risks.For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.
http://www.ezlan.NET/Win7/net_name.jpg
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .------------------------------
If your network consists only of Win 7 and you want a simple network, use it.
http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup
After you have configured the homegroup, scroll to the bottom for the Permission/security section.
-----------------------------
Win 7 networking with other version of Windows as a work network.
In the center of the network, by clicking on the type of network opens the window to the right.
Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.
http://www.ezlan.NET/Win7/net_type.jpg
Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm
Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspxSetting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-------------
If you have authorization and security problems, check the following settings.
Point to a folder that wants to share do right click and choose Properties.
In the properties
Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.
This screen shot is to Win 7, Vista menus are similar.
http://www.ezlan.NET/Win7/permission-security.jpg
The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.
When everything is OK, restart the network (router and computer).
* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.
* Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.
---------------------
*** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
My husband and I use Yahoo! Mail, but each has our own account. We are constantly put in front and in back. Enter the full name of the user and the password by hand each time it's boring, but it's not fair for one of us to have Mozilla to remember the user name and password. It would be great if there was a way for Mozilla to memorize our usernames and passwords. No idea if there is a way to do something like that? Thank you!
30 Firefox should be able to store more than one name and password to the Yahoo site.
Firefox should offer to store the name and the password for the other institutions.Make sure that you are not Firefox running in permanent private browsing mode (don't remember history).
- Tools > Options > privacy > Firefox will be: "use the custom settings for history".
- : Uncheck the [] "always use the private browsing mode.
You can control and manage permissions for the domain in the tab currently selected through these steps:
- Click the address bar onthe Site identity button"(globe/lock)
- Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
- Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab
There are other things that need your attention.
Note that your system details list shows several Flash plugins.
- Shockwave Flash 13.0 r0
- Shockwave Flash 12.0 r0
You can find the installation path of the plugins on the topic: plugins page.
You can view the installation folder of Flash player for multiple Flash player plugins and delete older versions of the plugin (NPSWF32) and possibly (re) install the latest Flash Player.
- (32-bit Windows) C:\Windows\System32\Macromed\Flash\
- (Windows 64 bit) C:\Windows\SysWOW64\Macromed\Flash\
-
Cannot focus Skype name and password in the login screen
I use Skype for a long time now and used the automatic connection whenever I start my computer. Today, I accidentally disconnected from Skype. Now, I can focus my Skype name and password in the login screen. I'm having the same problem with fields in Internet Explorer 11. Does anyone know a solution to this problem? I use Windows 7 Professional.
For me, that did the trick.
http://community.Skype.com/T5/Windows-desktop-client/Skype-won-t-sign-in-can-t-enter-password/m-p/41... -
How to make "Windows Picture and Fax Viewer" the default viewer?
"Picasa" to look at someones photos on the web, and now when dbl click on image, Picasa comes back as the image viewer.
Is possible, with a permanent framework for XP, do "Windows Picture and Fax Viewer" the default viewer? Thanks again for your help. akmbd166 (XPpro, SP-2, 7 - IE, Office2003)"Picasa" to look at someones photos on the web, and now when dbl click on image, Picasa comes back as the image viewer.
Is possible, with a permanent framework for XP, do "Windows Picture and Fax Viewer" the default viewer? Thanks again for your help. akmbd166 (XPpro, SP-2, 7 - IE, Office2003)=================================
The display of images by default XP's Windows Picture and
Fax Viewer... so all you have to do is to reset the default values:See the following link:
Utility to repair image file associations
http://WindowsXP.MVPs.org/imgassofix.htmmore information:
(307859) how to change or select which program
starts when you double-click a file in Windows XP
http://support.Microsoft.com/?kbid=307859Try this... open a folder of images and right-click
your file image... from the menu, select... Open
With / choose program.Make your choice from the list, or click Browse for the
correct program if it is not in the list.If you want the default value... to choose... "Windows".
Picture and Fax viewer '.Once you make your choice... don't forget to check
the box that says: "always use the selected program."
to open this type of file. (you will need to do
for each format, jpg, .tif, .gif... etc.)Also... you can click with the right button on an image and choose
Properties / change button... Choose the program
you want to use, and then click on... OK / apply / OK.Also, in Windows XP, you can go to... My computer.
Tools / Folder Options / File Types tab...Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
I use windows 7. How to change and be sure the default column width in Windows Explorer
I use windows 7. How to change and be sure the default column width in Windows Explorer
Hi Jimsw,
· If it works well before?
· You did changes to the computer before the show?
Explorer Windows will remember changed settings, check if this not happen as planned.
Follow the suggestions below for a possible solution:
Method 1: I suggest running the fix of the article and check if it helps.
Diagnose and repair Windows files and folders problems automatically
http://support.Microsoft.com/mats/windows_file_and_folder_diag/
Method 2: You can increase the width of the selected columns and apply the settings to all files and check.
a. right click on an empty space in the Windows Explorer, click on sort by.
b. now, enter the size required in the Pixel with and click OK.
Now, click on the drop down menu to organize and click on folder and Search Options.
Click view and click apply to folders and click OK.
I hope this helps.
-
I would like to know my name and company at the end of my emails.
I would like to know my name and company at the end of my emails. How can I do this?
You use Windows Mail?
How to create and set up a Signature in Windows Mail
http://www.Vistax64.com/tutorials/94853-Windows-mail-signatures.html
-
Although the value, I can not phone ring and vibrate as the default value for all calls. I can put individual to vibrate and ring contacts and it works but I want as the default for all incoming calls. Any help would be appreciated, thanks
Sorry, I found the answer in the manual
"Change your ringtone, sounds or alerts.
GoTo settings\notifications to the bottom of the screen select application\phone
You can activate vibrate out there, put the ringer default etc.
-
Name and location of the Windows 7 registry file.
Hello. I need the name and location of the file to registry Windows 7 so I can make sure to include it in my periodic backup.
What you need is an Image backup utility which will include the hives of the registry. A simple copy the reg file type backup will not work until you can restore Windows.
There are also backups in the folder C:\Windows\system32\config\regback.
Also: http://www.winvistaclub.com/f23.html
Never be afraid to ask. This forum has some of the best people in the world to help.
-
Original title: name/location of the executable that runs when you click on detect monitors?
What I need to know is the name and location of the executable that runs when you click on detect monitors in the menu screen resolution of windows 7?
Hello
Your question is better suited in the MSDN forums. Please post your question in the MSDN forums.
You can follow the link to your question:
http://social.msdn.Microsoft.com/forums/en-us/categories/It will be useful.
-
Oracle APEX server requires a user name and password of the server said XDB?
Hello
After you install version 5.0 of the APEX and tries to access the page admin APEX with EPG, I am invited with a pop-window that asks you a user name and password for the XDB?
Does somone has experience with it? What can be wrong in the configuration?
Thank you in advance.
Kind regards.
Hello
I found the problem.
Is there somwthing wrong in the security settings.
I re - run one of the steps with the right parameters of the call:
DBMS_NETWORK_ACL_ADMIN.append_host_ace
There is an error in the settings.
Now, I'm working.
Kind regards.
Maybe you are looking for
-
Complete hard drive well messages have a lot of space.
Hello world IM using a MacMini 2012 with 16 GB of RAM and a 500GB HDD stock. I don't know what to do. My MacMini gives me error messages all the time say that my HARD disk memory is full - but it isn't. I already emptied the trash. I was transferred
-
How can I rebuild Contacts using files retrieved from a failing hard drive?
I want to restore the Contacts (address book) on my new MacBook Pro, using recovered files to a failed drive of my old Mac. My Help Desk was able to extract most of the data files (but not apps) from the defective drive. These data files are restored
-
Satellite A500 - Webcam 10 Windows and drivers of the Fn keys
Hello I obtained through Satellite A500. After the upgrade to Windows 10 Webcam and Fn keys do not work. Where can I find driver updates? Thanks for the reply.
-
Satellite L850D does not start - black screen
Ok.. My wife L850D had problems with black screening started upward after the toshiba screen. I ran a few different utilities, including a reset... it all started about 3 weeks after the victory 8.1 upgrade. Rang technical support who kindly informed
-
a novice request that I have no sound on my laptopcan someone help please
I can't find anything in the Panel to do it anymore - thanks