LYD Lyd mikrofon optage optagelse
JEG kan ikke lyden til at virke pa min fa computer den bliver ved med at the EECS den er pa lydlos og nar siger den den vil finde problemet kan ikke finde det den
Vaelg said sprog fra drop-down look nederst pa siden said sende sporgsmal pa det sprog, the want to. Det forum of the udstationeret I er for kun fransk pa. If the ikke kan finde det onskede sprog stotter possibilities for verder ovennaevnte international steder ved at folge linket out end of kan:
Tags: Windows
Similar Questions
-
Kan ikke finde mikrofonen pa min computer
RRNA gram
Hey Arne,Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:Thank you -
ER kommet til at deaktivere mit lyd ikon, how aktivere jeg det igen
SOM jeg er kommet til at deaktivere says mit lyd ikon, eller jeg kan ikke finde det simple says retter.
Hvad jeg gor!Hello
Sorry, this forum is in English only.
Please select the language icon at the bottom of this page English and select your native language from the popup list to view the forums in the language of your choice.
If you can't find the language of your choice, support for international sites additional options can be found by clicking on the following link:
http://support.Microsoft.com/common/international.aspx
Concerning
-
Hej jeg har lidt med min lyd pa min pc issues. den ikke spiller I 20% lyd Lyse nomal den spiller. Hvad kan jeg gore for det er nomal?
Hello
Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
-
Hallo zusammen.
ICH kann unter Windows 8 im Audiodateien WaveEditor von Nero (Nero 12) nur über Mikrofon aufnehmen, was mit vielen Storgerauschen clear ist. ICH finde keine possibility, vom Mikrofon auf internal/digital admission - wie bei Windows XP without problem possible - umzustellen.
Kann mir einen Tipp give diesbezuglich someone? Vielen Dank im Voraus!Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:
Bitte wahlen Sie your Sprache aus der Dropdown-list am another Rand der Seite, um your question in der Sprache your Wahl zu schreiben. DAS Forum Sie ist nur as Englisch geschrieben. Wenn Sie nicht find, die gewunschte Sprache oben support options as international locations können über den following link unten found werden weitere
-
I can't call anyone on Skype, he said only: "problem with recording device" help?
Could someone help me? my lack of Skype let me call anyone, when I try to call or answer a call it comes a message saying "problem with recording device"-does anyone know how to fix this help please!
You can install this "driver - Lyd" (Realtek High-definition-lyddriver (HD))
-
Size of the hard drive does not match, what to do?
End of 2012, the MacBook Pro 13 "
I've added everything I installed and registered on my macbook and it does not match the size of my disk info...
I just deleted all the documents that I need to see what will happen with the size of the disk and it says: drive for 'other' size is 85GB andAudio = 0
Film = 0
Photo = 0
Programs = 0
Security Copies = 0
Other = 85,17 GBAnd the strange thing is that I have 10 + adobe programs installed (that doesn't add anywhere near 85 GB!)
But the weird thing ', it is also that it shows 0GB to programs/software that I obviously have a lot of programs/software installed. WHAAAT...It's really annoying
It seems as if increases the amount of data in 'other' counts for
Is there someone out there in the world of the internet, who knows how to fix this?
I tried to read a previous debate about this, but to be honest, I do not understand...
I'm not exactly a macbook-computer-expert when it comes to knowledge like thatI would be grateful for your help!
It is in Danish, but... Yes
LYD Sound/Audio =
Film = film
Photo = Photo
Progr. = Programs
Sik.Kopier = security Copies
Agent = other -
IS malware FoxTab PDF Converter and if so; How can I remove it?
I have a program on my computer that is supposed to be malicious. It's called Converter PDF FoxTab. The program refuses to uninstall and my unistallers does not unistall it. He said that the files cannot be found. Microsoft Essentials security does not detect when I scan for it. How do to ininstall this program?
Thank you
Lydie
Hello
I suggest you to follow the steps below and check if it helps.
Method 1:
Try to scan your computer for the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Method 2: Try to start your system in safe mode and then try to uninstall the program.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Method 3: Solve the problems installing and uninstalling the programs on Windows computers.
http://support.Microsoft.com/kb/2438651
Hope this information is useful.
-
output HDMI does not...
my friend connected a printer on my computer yesterday I'm using a desktop gateway computer and after they hung now my hdmi output does not work and I can't watch my programs from my computer on my tv... someone knows how to fix this? When I plug or unplud the cord hdmi on my desktop it recognizes not yet it is plugged/unplugged before my screen would go black for a second and then my speakers would make a noise (his speech) im using windows 7
Hello
Thanks for posting your question on the Microsoft community.
We need more information about the issue so that we can help you better.
What is the model number of your Gateway desktop computer?
Thank you for details on the issue.
This problem may occur because of corrupted device drivers or incorrect settings HDMI/display.
I would suggest trying the following methods and check if it helps.
Method 1:
Run the hardware and devices Troubleshooter and check.
Reference:
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-TroubleshooterIt checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
If this does not help, use method 2.
Method 2:
Please refer to the suggestions of Rohit lydie said on November 6, 2009 and check the issue.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-7-does-not-output-to-HDMI/985a4f2a-075d-4543-9e28-68119678d9fcI hope this information helps.
Please let us know if you need more help.
Thank you
-
WWAN activation (high-speed Mobile) does not work
Hello
I set up a X220t in the online store. For programming reasons choose international keyboard and international configuration. For use of long date of the camera, I also choose the richest configuration especially with the map mobile broadband built-in.
But I don't have it still works. Even when I insert a SIM card into the slot in the Toolbox ThinkVantage gives the message:
"Your the wide area wireless (WWAN) network card is installed but not enabled.
When I try to activate the map I can not choose the provider appropriate menu drop-down (Germany: Vodafone, T-Mobile, O2,...) There is only one service provider of the United States selectable: AT & T.
Lenovo to ship the WWAN card with a provider lock? I saw no evidence on this point!
How can I activate the WWAN Module then?
Thanks in advance.
Best regards
Lydie
Sorry people for the delay.
For the record: my machine type is 4296-CTO.
For completeness: another message, I always had when I tried to use the WWAN card was: "no SIM installed".
I contacted lenovo support to solve the problem and they understood my WWAN card was broken.
Then they took my laptop and after 6 days I return it with a work WWAN card.
Many thanks to the support of lenovo!
See you soon
Lydie
-
Hello everyone...
I have camera ISE integrated with Active Directory to authenticate users, and I integrated with the ISE also WLC.
integration successfully and now no matter what user access to the network via WIFI (Dot1x), it must use its AD credintials and if he he get full access, if not consistent it go the quarantine vlan.
My problem is the mobile, there are a few users need access to the WIFI using mobile workers using credintials AD and I need to circumvent the posturing for mobile only.
in other words, I just need to check if the device is compliant or non-compliant mobile only, while I need this feature for laptops.
Note: I have 1 one SSID
suggestions for this case...
Lydie
Hi Adrien, endpoint policy was added in ISE 1.1 MR1, I think you need to upgrade to see this. I highly recommend upgrading to the latest version of ISE, in any case, because it is much improved over the version 1.1.0.
Thank you
Andy
-
Hello Experts
I LSE with advanced for 1500 user license and I WLC 2504, and I need to integrate the WLC with the ISE in obtaining the ISE features for wireless as posture, restoring users and authentication as well.
My question: is the advanced license is sufficient, or will I install the license wireless to the LSE to have integration...
your comments and input appreciated...
Lydie
Here is some information about the different types of licenses-
http://www.Cisco.com/en/us/docs/security/ISE/1.2/user_guide/ise_man_license.html#wp1074395
Essentially licensed wireless is a little like the basic license if your deployment is 100% wireless, wireless upgrade is equivalent to the license advanced once more for just a wireless deployment.
Basic and advanced covers all (wired, wireless, vpn, etc). There is no restriction for the deployment model.
Thank you
Tarik Admani
* Please note the useful messages *. -
Why my drive WarChiefs age empires 3 will not download on my windows 8?
Original title: Age of Empires III
Why my drive WarChiefs age empires 3 will not download on my windows 8?
Hello Bromandbj,
Thank you for the update on the question and sorry for a delayed response.
If you found the error 1628: could not complete the installation then in this case I suggest to try the steps in the following thread by Rohit lydie responded on 24 June 2013 and see if it helps.
Age of Empires 3 not installing - error code: 1628: failed to complete Installation
Keep us updated on the issue.
Kind regards.
-
Original title: RunDLL error
"When I start my pc, I get an error message that States,"There was a problem starting c:\users\george\appdata\local\conduit\backgroundcontainer\gackgroundcontainer.dll"the specified module could not be found. Can anyone help?
Thank you for your time/help! Before I read your posts, I had found a response which, so far, has corrected my error.
Respectfully,.
George
-
Remove the assets of page containing a URL value
Hi all
A newbie question.
I deleted an active page, which contains a URL "abc/xyz". And later, I created a new page that I would use the url "abc/xyz". Now, WCS said to me that ' URL already exists in the system. Provide a URL of substitution "."
(i) so, how to 'release' a URL that has been used in a page, which had already been deleted?
(II) and is it possible UI contributor?
Thanks in advance for any help.
Hi Alchn,
This bug has been fixed in Patch 4.
17614551:
Description:
Deletion of an asset does not remove the load webreference.
File (s):
xcelerate/src/main/java/com/openmarket/assetframework/common/BulkTransactionalAssetManager.javaSimply check the patch that you environment is on. If possible, please apply patch 4 or higher.
Even if the URLS is not removed automatically when an asset is removed, you can work around this by using tools-> URL system, in the Admin tab and delete all vanity URLS you have created/associate assets removed.
Find more details in the Administrator's Guide to Sites WebCenter under Chapter 24.3 - using Vanity URL with System Tools - http://docs.oracle.com/cd/E29542_01/doc.1111/e29636/config_vanity_url.htm#CIHHJDAH.
Kind regards
Lydie
Maybe you are looking for
-
The offending site is loaded in a second tab as well as my home page when I open Firefox. How can I stop this loading site automatically?
-
My icon in the left lower bar disappeared, how I put back it?
When I installed FF 3.6.22, FF icon down in the lower tray left disappeared, (I don't have not noticed this), and has appeared on the desktop. I hate the icons on the desktop, so I deleted the shortcut and then noticed that the icon has disappeared f
-
Why my links do not illuminate so others can click on?
When sending emails to announce a new business or send the link to somewhere else, illuminate, so that they can simply click and go.
-
7.0.28.14.1 firmware on TL938 series: idle Youtube
I would ask colleagues to forum running Firmware version 7.0.28.14.1 as of July 1, 2013 at the TL938 TV series: Your YouTube works properly (both by the family account and account staff) in places of Toshiba? In my case, on a 40TL938G, after an upgra
-
I started my Satellite M60 this morning and it happened (pause) of beep beep beep beep and nothing came on the screen. I had to press and hold the power off switch. After awhile, I tried again and this time it started OK. But I would like to know wha