Codes sound satellite M60

Similar Questions

• Codes sound satellite 1900-303

  I have a 1900-S303 Satellite that has a broken screen. The hard drive and ram have been removed by the previous owner. If I turn on the laptop it gives 3 long beeps and does not appear on an external monitor. My question is what is the meaning of the beeps, it will not show because the ram is missing and what kind of ram I need. There are 3 memory slots, one under the keyboard and two below, all are missing from the RAM chips. Basically it is worth buying a new screen for it, because they are very expensive?

  Hello

  It is quite possible that the machine will beep when no RAM is available.
  To help with the dilemma of new parts - consider the following:
  Summarize the price for new modules of RAM and a hard drive again.
  Contact an ASP and ask them for the price of the screen for this model (you must be precise because there are several models of the 1900 series!).
  How much is it? Compare it aware of the prices for the kind of machine you need (laptop / desktop/performance and so on). Then it should be easy to judge how to proceed.

  BR

  Tom

• Satellite M60 - BK3: cannot get sound after installing Vista

  Hello

  I installed Windows Vista Ultimate (32 bit) on my Toshiba Satellite M60 - BK3, but I can't not all sounds is the correct video settings. I searched on the internet and it seems that this family of satellites is not supported to be upgraded to Windows Vista: S

  Does anyone have an idea of how get these drivers to make my laptop works fine with Vista?

  Thank you.

  Rodrigo

  Hello

  This Satellite M60 - BK3 model does not work for me. Where did you buy it?
  Try to install a hardware diagnostic tool to know what sound chip and the graphics card supports this laptop.

  You can download the drivers from the part manufacturer's website.

• Satellite M60-135: no function Sound Mixer level controls to "CD player".

  Hallo,

  On my Satellite M60-135 (Toshiba original Setup) Windows XP Sound Mixer shows a slider of level setting for the drive but it doesn t work.
  I can drag the level control or may mark the mute control for CD player, but it has no effect.

  I tried to disable digital playback in the device driver for the DVD-RAM device but it doesn't change anything on the level control.

  Is this a general problem of the Satellite M60, is a specific defect of my M60 or can it be fixed by updating all the drivers?

  Thank you for any suspicion.

  Wolfgang Nohl

  Hello, Wolfgang

  Believe me that this is not a problem or any kind of fault. As you know CD players used on desktop computers have audio out port. This level control Configurator will be used just for them. Portable CD or DVD player has this audio separated on the port and that this option cannot be used. The same situation is on my Tecra M1.

  In addition, it is a tool of Microsoft and Toshiba has no influence on it. As you know there is no OS designed only for laptops and this option is that it can not be used.

  Good luck and have lots of fun with your M60. It's a great unit!

• Satellite M60-171 sounds like echo-wells

  Hello

  My satellite M60-171 resembles a well echo. Reinstalling drivers does not seem to solve the problem (problem has always been there and no I have no idea since when this problem occurs...)

  The sound itself is not bad at all; but the echo in all the sounds it's annoying...

  Suggestions?

  Greetz,

  Peter

  Hello

  Have you tried to system restore to earlier date? Maybe this will solve it in no time and you should not waste your time searching around und check all available options.

• After 5 min screen goes black on Satellite M60 all in game WOW

  Hello

  for two weeks my Satellite M60 presents problems for the game WOW.
  After 5 min of the Nootbook screen dark past, or permanent display, and nothing will.

  Before a year I push my Ram from 1 up to 2 GB.
  Is there someone who can help you?

  Thank you very much

  Hello

  Sounds like a RAM or overheating problem.
  Maybe the modules to affect the internal temperature higher RAM and functionality.
  This can lead to problems while game.

  I think you should first check if cooling modules a free from dust and debris.
  Dust can be removed using a jet of compressed air.

  The next step should be an update of the display driver.
  Check if there is some more recent versions. If yes-> updated!

  Good luck

• Satellite M60-148, vodafone mobile connect card

  Unable to connect a vmcc vodafone mobile connect card to my satellite M60-148 (new model 17'). OK for the software, ok for the vodafone window, but could not get the window with the PIN code. The same card vmcc works with my old toshiba laptop satellite series (win 98)

  Hi Chrise

  It seems that this is not a problem of the operating system.
  Have you installed the software drivers?
  On the manufacturing site, I found some info.

  Please take a look at this link

  upport of http://www.Vodafone.com.FJ/index.cfm?Go=VF.businesssolutions&cmd=businessvmcs

  Let me know if you succeed.

  Best regards

• Satellite M60 - screen does not light when I reboot

  I have a Toshiba Satellite M60 and the screen does not come when I turn off or restart. It takes approximately 12 trials before it lights. When the screen does the computer not light again starts ok just no screen.

  I put in sleep mode if I don't want the hassle of trying to get the screen lights up. What is a screen problem or inverter?

  Any help would be appreciated.

  I doubt that someone who has no experience with this stuff will be able to replace anything on the motherboard.
  For me it sounds very risky and I think that it of better to take the machine to an experienced technician to do this in his own hand and damage the whole motherboard

• Satellite M60 - message: graphic driver works correctly

  Hello

  I own the Satellite M60 laptop and have problems with the graphics card ATI X 700.
  Often, I get the message that my graphics driver does not work properly.
  When this happens, changing resolution displays at 720 * 640 I think and I have to restart my pc.

  What did I try?
  I installed a new windows system, I tried to make a new absolutely clean driver to install.

  But nothing helped.
  Someone at - it an idea, what I have to do?

  concerning

  > Often, I get the message, that my graphics driver doesn t work properly.
  > In this case, the change in resolution display 720 * 640 I think and I have to restart my pc
  Sounds more like a hardware malfunction as software delivers what dilute you?
  To me, it seems that the graphics chip would cause this issue may be due to a higher internal temperature? ?:|

  Have you noticed a higher temperature while this problem appear?

• Satellite M60 - 164 need Win 7 driver for Player DVD Super Multi TS - 632B

  I have a portable satellite m60-164, I put windows 7 on it and windows does not recognize as a multi drive only a dvd - rw.
  can someone help me find a readers who works on Windows 7?

  PLEASE

  Hello

  I completely agree with Akuma. Windows 7 supports and include clean driver CD/DVD from Microsoft. If the optical CD/DVD drive should be automatically recognized by Win7.

  You see the ODD in Device Manager?
  If there is a yellow exclamation point, remove the ODD of Device Manager, and then restart the device after restarting again the laptop must find new device and should recognize this.

• Satellite M60: cannot install the latest driver for my graphics card

  Can not install the latest driver for my graphics card
  Satellite M60
  GRAPHICS ATI MOBILITY RADEON X 700

  Hello

  First of all I'm really putting t understand why you start two topics with the same theme. It is often better to have a subject with good content and interesting comments. Am I wrong? ;)

  Anyway, in your case, it is interesting that Toshiba use adapted drivers because of the material. This means that this graphics card is not required to run at the maximum level. Material cooling in laptops is very problematic and high temperature can cause overheating or a material damage. All hardware components are placed on a small square. Graphics card produces a lot of heat and it is not so good for other material.

  When you use graphic driver non-Toshiba card is forced to run faster. That's any use of support laptop manufacturers don t of third party drivers. The fact is that physical protection is a priority.

  I didn t do all the experiments, but according to some reports on this forum, there is how to install the driver of non-Toshiba graphics card.

  Please check this forum and you can find a lot of comments about this. An interesting topic is http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18063&messageID=66186

• To install Vista on Satellite M60

  Is that what anyone has experienced hardware problems during the installation of Vista on the laptop above. I have already increased the RAM to 2 GB, which is the maximum.

  I'm sitting looking at a copy of Vista and do not know to install on my laptop or home built PC, Help!

  Thank you

  Hello amber

  If I remember well satellite M60 is not portable to Vista and there may be a bit more problematic with Vista support. I imagine that you will have problems because of incompatible BIOS version, but you can check your hardware using Windows Vista Upgrade Advisor. You can find it HERE

  Please use it and see the hardware compatibility report.

  Just for example: I managed to install Vista on Satellite M70. It is also portable to Vista but Vista works well.

• Satellite M60 Hardware Upgrade question

  Hi all

  I have a PC laptop Toshiba M60 just after some information to be upgraded for online games (if its worth it) plug as follows: -.

  [Information on PC]
  Model name Satellite M60
  Part number PSM60A-02F00D
  Serial number
  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 3
  Version of the BIOS V1.20
  Processor Intel (r) Pentium (r) M processor 2.00 GHz
  1024 MB of RAM memory
  Disk capacity hard 79,826,342,400 [bytes] 74.344 [GB]
  Capacity of the hard drive space free 61,610,532,864 [bytes] 57.379 [GB]
  Video NVIDIA GeForce Go 6600 worm = 6.14.11.9805
  Screen resolution 1680 x 1050 Pixels
  Color quality, true color (32 bit)
  Audio Realtek AC97 Audio worm = 5.10.0.5830
  Realtek RTL8169/8110 Family Gigabit Ethernet NIC network worm = 5.709.1121.2008
  Intel (r) PRO/Wireless 2915ABG Network Connection worm = 9.0.4.39 MacAddr =
  Modem software Modem TOSHIBA worm = 2.1.51.0
  IDE Device 1 TOSHIBA MK8026GAX
  Interface IDE 2 no
  Devices IDE 3 MAST * a DVD - RAM UJ-years 840 Firmware = 1502
  Interface IDE 4 no
  Interface IDE 5 no
  Interface IDE 6 no
  Internet Explorer 8.0.6001.18702

  EC/KBC Version «»
  PS-MICOM Version «»

  You can upgrade what RAM or HARD drive.
  With more RAM laptop will have better performance in general, but I don't know if this will help a lot for online games.

• Satellite M60-159 - need help with RAM

  Hello
  I have laptop M60 - 159
  Now I have inside 512 MB RAM 2Rx16 PC2-4200 s-444-12-A3 SAMSUNG
  I know that this notebook can use 2 x 1 GB
  Please someone tell me what the faster RAM, can I put?
  This? GOODRAM DDR2-667 PC2-5300 SODIMM 1 GB?
  Better or worse?

  Thank you & best regards

  Post edited by: adrian351

  The point is to use Rams compatible and not faster. If speed of the FSB 533 MHz is there is no sense to use faster RAM.
  "So we are going to discuss here on the best solution for you;).

  Compatible 1 GB of RAM for your Satellite M60 is with PA3411U-1M1G part number.

• Satellite M60-169: BSOD appears after upgrade RAM to 1.5 GB

  Hello

  Satellite M60-169 got 1 GB DDR2 Samsung 533 MHz RAM-Modules (2x512MB).
  Now, I have installed a new 1 GB DDR2 Samsung 533 MHz RAM-Module (1x1024MB + orig. 1x512mo = 1, 5 GB memory)

  The problem is: the system reboots before you start Windows XP or Windows Vista.
  Reinstaling 2x512MB Modules: everything works fine.
  Reinstall the new 1 GB Module: blue screen and reboot. :(

  I tested the memory modules with memtest86 Boot-CD and all DD2-Modules work and produce no errors.
  Why the new RAM is not compatible with the laptop?

  The specifications of the new 1024 MB of RAM is: Samsung 1 GB 2Rx8 PC2-4200-444-12-E3 M470T2953CZ3-CD5 double sided
  The specifications of the orig. 512 MB of RAM is: double-Samsung 512 MB 2Rx16 PC2-4200-444-12-A3-M470T6554CZ3-CD5

  Very strange! The RAM is like the original equipped with RAM.
  Is this a BIOS problem?
  If I don't just install a single module of 512 MB, the system starts without any problem. Even if I install only a single modulue of the new 1 GB of RAM, the system does not boot to Windows.

  There may be a BIOS Solution for this problem in the future?, now more installed new BIOS (1.60).

  BR Pappl

  Hello

  I don t think the BIOS problem.
  In my opinion, there is a problem with the RAM modules.
  The new module of memory is default or it s just not compatible.

  Perhaps the mix of RAM is the reason for BSOD interruptions.
  Have you tried to use only the new 1 GB module?
  Check it out.

  I have additional checked the Web from Toshiba site Options & accessories and according to the news, you must use this memory module 1 GB:
  1 GB OF DDR2 400/533 (PA3411U-1M1G)