M11xr3 for a large LCD screen?

Similar Questions

• Satellite Pro L10: I am looking for a new LCD screen

  Hello
  I am looking to buy lcd screen for my machine L10 had been broken in me. I don mind to buy second hand. is it possible to help me.

  Will be very grateful to you

  There is not much help. Either you contact Toshiba service or you can check if you can order LCD of some independent hardware for laptop store.

  I put t know in which country you live but Google a little and see if you can find a PC shop where you can order parts for your model of laptop.

  BTW: do Exchange you view-only?

• New LCD screen of need for Satellite L20-173

  Can anyone help I need to get a screen for my laptop everything else works fine, I can have someone
  solve this problem for me when I found one and what is the cost?

  The specs for the laptop are model L20-173.

  Hello

  If you want to buy a new screen, you can order this part from the provider of service authorized in your country.
  But are you sure you want to buy a new piece? The LCD is one of the expensive parts for laptop and it will cost you a small fortune

  Instead of buying a new game, you can try to search the second hand LCD!

  A new 15 1024 x 768 LCD display cost about $ 300
  http://www.screentekinc.com/Toshiba_Satellite_L20--15-inch--1024x768-XGA-laptop-LCD-screen.shtml

• Need LCD screen for Satellite A10 S811

  My screen laptop for some reason any (must have hit somewhere) does not work properly.
  So I have to replace because I need my laptop for my work and I have a lot of files that I need.

  My laptop is 4-5 years so I don't want to pay a whole fortune to replace my LCD screen
  This is the A of Toshiba Satellite series with screen 15 inches.

  For the month next (until 27 August), I'd be in Paris because of some jobs and I need repair my laptop so that I can work.

  If anyone knows anything, where I can get a screen at a reasonable price, please respond as soon as possible.
  I found this site selling LCD screens http://pchub.com/uph/category/115/15-TFT-LCD.html but im not sure which one to buy for my model is.

  Please, any help is needed... It s quite urgent.
  Thank you very much.
  yours,
  Andreas chouliaras

  Hi Andreas

  As you probably know the LCD and mobile motherboards is one of the most expensive parts. The new parts cost a small fortune
  I studied a bit on the net and found this site with 15 compatible screens for a Sat A10.

  The new view costs about $ 325... so it s really not a cheap part!

  http://www.screentekinc.com/Toshiba_Satellite_A10--15-inch--1024x768-XGA-laptop-LCD-screen.shtml

  What do you think about part of second hand?

• After installing the latest updates, my screen on large icons, screen too big for my moniter

  the only way of difficulty was to uninstall updates.

  After installing the latest updates, my screen on large icons, screen too large for my moniter the only way of difficulty was to uninstall updates.

  Sounds like something in the update causes a conflict with your video driver or change the resolution settings.
   
  The first thing to do to solve the problem is to try to install each of the updates one at a time instead of let Windows Update do several updates together.  If you're lucky, the problem can not ride again.  If so, you'll know at least update is the cause of the problem.

  If the problem persists, try right click on an empty area of your desktop and select properties to open the display properties dialog box.  Select the settings tab.  Look to see if the screen is correctly identified and if the resolution seems correct.  If you spot something wrong, change to the correct setting.  If everything looks correct, you can try to change the resolution to see if that can solve the problem.

  You can also check the website of the manufacturer of your graphics card to see if they have an updated display driver.  Updates of the operating system only sometimes work correctly if you have the latest version of the drivers for the various components.

  If all else fails, you can uninstall the update one that is causing the problem and mark do not show you this update again in Windows updates.   Doing so will be considered a last resort - especially if the update in question is one of the security updates.

• How can I fix lines horizontal randomly and glitter for the LCD screens for HP Pavilion dv5 Vista?

  How can I correct random lines horizontal and glitter for the LCD screens for windows vista HP Pavilion dv5? Only, it happens randomly and can get all a few minutes at a time every few hours. The entire screen white and black and horizontal lines will appear during the flickering on the half top of the screen only. Nothing else changes. My sound is immutable, and none of my screens change the size or location. However, they may appear up and down during the flashing. Can someone give me an idea of what is wrong? I looked on Google for possible corrections, but most of them seem to be for refresh rate and I don't have a notch for this and can't change it according to the steps they offer.

  Read my initial response on what it takes to please.

  "See if this helps you:

  These lines indicate corruption graphics driver or lack of graphic material.

  Go to the HP Web site > Search a drivers and download article > search your laptop model number > your operating system > drivers for it: either video / graphic / Chipset (according to the wording it) > download and install the drivers.

  http://WWW8.HP.com/us/en/support-drivers.html

  If that fixed it, it seems to me be a problem of graphic material.

  Because it's a laptop; If under warranty, contact HP.

  If is not under warranty, contact a repair shop, local. »

  See you soon.

• "Deploy the data model for LCD screens" period

  Hello

  My Jboss is time-consuming while deploying the data model for LCD screens and it's initially Flash Builder 4 to display the error "Read Timed" out. How can I increase this timeout value?

  Thank you

  Houda

  Hello

  Please follow the steps below and see if it helps:

  1. in your Flash Builder click on the item in window menu, click on Preferences

  2. in the Preferences window, select Adobe-> RDS configuration

  3. Select your configured server and change/set Timeout

  I hope this helps.

• Using the "back button" update for the LCD screen on the 60 d

  I used this method all the time, but now when I push on the development of the "back" button, it snaps as it is to take a picture, but no image is recorded on the SD card. When I look through the viewfinder and use the button "return" of discussion, it works perfectly.  I would like to know how to get back to the old method of development on the LCD screen, with the emphasis of the "back" button.  My Canon is a 60 d

  pixeltaker wrote:

  I used this method all the time, but now when I push on the development of the "back" button, it snaps as it is to take a picture, but no image is recorded on the SD card. When I look through the viewfinder and use the button "return" of discussion, it works perfectly.  I would like to know how to get back to the old method of development on the LCD screen, with the emphasis of the "back" button.  My Canon is a 60 d

  You must go to the menu and move the quick mode to Live Mode.  In fast mode, when you press on the "back" button, the mirror flips down (click) and the camera tries to focus.  He has not yet made the photo.  To take a photo, you must listen to the AF confirm beep, then press the shutter button.  Quick mode is in fact the "snail", in my opinion .  Read more about this on page 160-168 of this manual.

  

• Satellite PRO U500 - LCD screen size is reduced

  Hi all,

  I have a Toshiba Satellite Pro U500 with one small problem, the size of the LCD screen is reduced. I have a white border to the right and down. The max resolution is 1024 x 768.
  The problem is visible also when I enter the BIOS, so I think that the problem is not Operting System drivers.
  Is there a solution to my problem? I have to send in the audience?

  Thank you for the help
  Giuseppe

  H

  It is really strange, especially if you see the same thing in the BIOS settings?
  Since when did you notice this behavior?
  Do you use pre-installed OS original you got with your laptop?

  Have you done something that may be responsible for the issue described?

  I U500 and default display resolution is 1280 X 800 t, so I understand why you have 1024 X 768 on your U500.

• Portege R100 video cable does not reach the replacement LCD screen

  Hi guys, I have replaced the LCD screen of my Toshiba R100, than they had in it was defective. It seemed that it was a replacement at some point however. In any case, I received my new screen, but does not reach the video cable to the top of the circuit of LCD screens. How am I meant to connect it to the screen? Is there an extension cable or what? The screen they had in there previously looked like they were welded copper wires about 8 digitizer.

  Here are 2 pictures of what I mean

  

  

  Hello

  Where did you buy this screen?
  Are you sure that it is perfectly compatible with your laptop protected R100 to 100%?

  Looks like it s not fully compatible
  However, if an extra cable is necessary you can get it from the Toshiba ASP in your country.

  In your case, I recommend you contact the guy and ask for compatible cable!

  Welcome them

• Satellite 5100 - LCD screen no longer lights

  Hi, I hope someone will help me on this problem.

  After disassembly of the top satellite covers the lcd screen that does more, but I guess the system is working properly because I can hear windows access "jingle". I think that I reconnected it all cables (green and white connectors for the video card), but I'm not sure thin brown/white/black cable of the lcd screen. That's all

  Hi stefano88,

  Why you have disassembled the LCD?

  To be honest I n don't know cables, you want to say you also plugged the UPS FL for LCD display? This is necessary because FL inverter controls the backlight of your screen.

  Can post you a photo of the cables you want to say?

• Equium P200 1ir - where can I buy cable LCD screen

  Hi all

  I have an Equium P200 1ir and my screen has been crazy, color errors everywhere.
  I followed the problem down to be a cut wire in the cable of the internal lcd screen.

  My question is: where can I buy a cable lcd screen replacement for this machine that the screen itself is fine.

  I have searched all over the web and have had no joy. If possible can someone Toshiba advise me to buy the lead...

  Thanks in advance

  Antony

  Hello

  All laptop parts can be ordered from a local Toshiba authorized service provider.
  The ASP in your country should be able to help
  If these cables is not available or not on stock, then guys would be able to order this Toshiba head stock

  Have a look here to find all of the ASP in the world:
  http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

• Satellite Pro U300 - the broken LCD screen

  Hi all

  My first post please bare with me.

  I have a Satellite Pro U300, who has a broken LCD screen.
  I have a replacement screen, but not sure how to go abouts it change places.

  Someone at - it a service manual for this model or the tricks and tips on how to disassemble the unit to swap the LCD broke with a new one?

  Any help would be greatly appreciated.

  The service manual can be downloaded. It s not for the public and it s only for Toshiba and approved providers available I think.
  On the Toshiba site, you can download the user manual, but I doubt it would be useful for you.

  I think the best way would be if you go to an authorized service provider. The exchange of the LCD is a little tricky and you should have experience with this.
  On the Toshiba site, you can search for an ASP. I m sure that the technicians will help you. ;)

• Part number 2006 imac 17 inch lcd screen

  Hello I have a question to try to get the correct part number Apple for a replacement LCD for my iMac Early 2006 17-inch 2.0 GHz model A1208 screen please?

  And yes my computer developed the vertical lines that eventually became half of a black screen, and although I can connect on my old iMac and see half of my office, I notice that I can not open the photos or images.

  So, I'm now trying to fix it.

  If you know what Apple suggested replacing correct these bad LCD screens, I would really appreciate it!

  Thank you!

  -Peggy neck in Northern Virginia

  Check with ifixit.com. they should know and maybe the part.

• Tecra 9000 - no display on the LCD screen when you turn on

  I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

  The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

  After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

  Someone at - it suggestions? This is a problem for others here?

  As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
  Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.