M177fw - no Toner to paper

Similar Questions

• HP 3050 leaves the vertical line of toner on paper

  Let the vertical line of toner on paper

  Hello

  You should check with the help of HP as it's a problem with the printer and not Windows.
  Also check their forums where there are others with the same printer.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Laser jet mfp m177fw pro: Customize the paper size

  How do customize you printer for paper for example size 7.25 in x3.5in none of the predefined options is pretty close to this size.

  Hello

  Did you run that Windows updates these days? Looks like Windows 10 updates of process is th culprid. One option is to restore your computer a few days back. Please try:

  http://Windows.Microsoft.com/en-AU/Windows-10/Windows-10-recovery-options

  Kind regards.

• M177FW MFP non-standard paper sizes

  Hi all

  I use libreoffice on windows and linux (Mint ubuntu and debian testing) and sometimes I have to print on formats very non standard: 102 * 333 mm

  It's a huge pain decent print on such a document: y at - it an easy solution, especially for linux?

  yesterday, I noticed that, after some 50 prints on such a format, printer stop before each draw for cool, even if it didn't work or was turned off for minutes: is this normal?

  Thank you

  Hi Carlo85,

  Your welcome. I meant Linux support forums. They would have more information on this operating system.

  This is a support page for Linux that you can take a look at.

  Frequently asked questions about Linux (FAQ).

  Thank you.

• How can I stop firefox auto discovered printers on fedora?

  On Linux Fedora (19 & 20 at least, probably others) Firefox automatically detects printers connected to the network, completely independently of CUPS. The printer it finds for me is legitimate, but it does not install the drivers to make it work properly. If this printer is used, it will display gibberish; control of PDF language, sometimes total sometimes undesirable. It restores the right page and tons of paper waste.

  Thank you!

  Thank you.

  I found that avahi-daemon is the culprit. I just do a fresh install of Fedora 20. I have not configured all printers, and yet the printer 'bad' appeared in the list of printers in Firefox. After that I stopped avahi-daemon and avahi - daemon.socket, the printer went away.

  I also noticed with my installation of Fedora 19, bad printer went if I put my computer on a different subnet.

  So the next step is to understand how to configure avahi to not behave in this way when it runs.

  I appreciate your help.

  • • Post script *.

  I looked at what I could find on avahi, but seems not be one any affecting to ignore a particular host. However, after a survey, I found the right setting on my Lexmark E260DN to change. Under TCP/IP settings, there is a checkbox for "mDNS." The default value is on. Once I turned it off, that solved the problem, allowing me to reactivate the avahi on my computer safely. I had looked for something like this earlier, but missed, I was looking for things like 'Hello', "zeroconf", "DNS - SD" or something similar.

• What necessary SNMP MIB file

  Does anyone know where I could find information (MIB) machine for Toshiba MFP devices file. I googled had and checked the predominant sites for these types of files. I'm looking to get the OID for an eStudio-600 so I can configure the SNMP interruptions for alerts of toner and paper jams.

  Thank you

  Mike

  PS: I put here as a matter of SNMP network, if it's wrong please feel free to move it to the right forum.

  In my opinion, this forum is wrong place for this question. I think you should contact your local dealer where you bought your eStudio-600.
  They offer a type of support or not?

• M127fw MFP: MFP M127fw disable fax error report

  I have read of people having this problem with other printers. Whenever I get a call my it prints an error fax report. It's wasting my toner and paper. The manual refers not at all to it. Some posted the same problem of report and from in settings by selecting never he was supposed to turn it off. I guess it worked for them, but not this model. It made it worse.  When I read the report (after these operations) it says error Fax report = on every mistake.  Can you please tell me how to disable this option. There is no phone or tech support online which takes in charge of this issue. So I use this forum. Help, please.

  Thank you

  Hello and welcome to the community of HP @estees2,

  I understand that you want to disable fax on your M127fw of MFP HP LaserJet Pro error reports. I'll be happy to help you.

  Here is a link to a forum post by a fellow Gemini02 who proposes measures to solve this problem and has been accepted as a solution.

  HP Laserjet Pro print FAX error messages M127fw

  Please, try the following steps and let me know the results.

  If you still experience the issue after trying the steps in the link above, I recommend that to contact HP for assistance.

  Contact HP:
  Step 1. Open the link: http://h22207.www2.hp.com/us-en/contact-hp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps. Have a great day.

• . Printer - printing of brilliant photos, coating melts when printing

  My laser printer samsung 3185, when printing photos in color using lazer color paper, glossy coating is melting (, printer is again 4 weeks old) impression is ok on plain paper.

  This is the wrong place to ask this question. This forum is for discussion, compliments, complaints or suggestions about the Microsoft Answers experience.

  In addition, it is not a Windows problem.  It's not even a printer problem.  It's a problem buying.

  All that being said...

  All laser printers use high heat to merge the particles of toner on paper.  This is how works a laser printer.  And that's why you should not use ordinary coated photo paper in a laser printer.  If you want to use the paper, you can buy paper that is specially designed for laser printers.  For example: http://www.shopping.hp.com/product/Q6608A?landing=supplies&category=paper&family_name=

• HP Photosmart c7280 all-in - One Mac 10.7.1 (Lion) "Double" option is grayed out and cannot be used?

  I have a HP Photosmart c7280 all-in-One printer and a Macbook Air running OS Lion (10.7.1).

  I'm trying and who need to print via the option "Double" that appears under the menu of "Layout" drop down tab option, the option 'Double' however seem to be grayed out as if you are not allowed to use it.  I'm sure this isn't the case, I don't know how to unlock but I guess?

  I just made sure all my software was updated and is currently.

  Everything is perfect on the printer and I used it for years, thank you!  I just want to know what on earth am I doing wrong or need to do to unlock this "Double-sided" parameter, so that I don't waste a ton of paper!  Thanks again!

  Sincerely,

  DAP413

  Hi DAP413,

  To actiate the two-sided accessory, you have to enable the printer settings:

  -Enter in System Preferences > print & Scan

  -Double-click the name of the Photosmart printer to open the print queue.

  -Click the printer setup button

  -Click on the driver tab and make sure the duplex printing accessory option is checked.

• What is the function of support biredirectional activate the tab of the printer properties ports?

  What is the function of support biredirectional activate the tab of the printer properties ports?

  Back in the day, the printers were an output device only when the computer would simply send your print job to the printer and it would print (or not).  Now printers 'reply' to your computer and notify you levels of ink and toner low, paper jams, termination of success/failure, etc.    Enable bidirectional support allows the printer to 'reply' to your computer.

  HTH,
  JW

• 3015 dn

  I use a HP 3015dn in a shipping department. It is not air-conditioned, but usually in the mid to high 80's. I noticed that the paper coming out of the printer is very hot. It's actually curling upward because of the heat. The printer is not interference and seems to work correctly. It's less than a year, and I just want to make sure that it works properly before the expiration of the warranty.

  Is there anything I can check? Thank you...

  It is normal that the paper is warm because of passing on the fuser, a heating element that fuses the toner on paper.

  One thing you might try is to load the paper with the side opposed to the top - I found a bit of paper has a preferred direction and print on one side causes first a Warp more than the other side.  Looking for an arrow on the paper with the side preferred to print.  It may take a few tries to determine if you want the side of the arrow upwards or downwards, it can vary according to the printer model.

• P4015tn HP: HP P4015tn print quality and ghosting

  The printer is used in a printing invoice detail environment print sheets of 200-300 per day.

  Ghosting of the invoice headers was noted a few weeks previously and only on the day first few bills.  Last week, they appear on each invoice.  The machine has been cleaned with compressed air and a new toner cartridge installed. The ghost images are gone.

  Now there is a print light about 1/4 "wide vertically area down the page in the lines of print 3" between the left edge of the page and a little ink in the center of the Bill.

  What should be my next step to address these gaps?

  Assessment of SHThompson of your question is wrong.

  A ghost on a printed page image problem is a defective fuser unit. In a printer, the toner is applied to the page. The toner and paper and then through the fuser unit. The fuser unit uses high temperatures to instantly melt the toner on the page. When everything works, you get crisp clean pages.

  However, the fuser unit may fail in a couple of ways that give rise to two different types of "ghosting":

  The first type of ghost image may appear as a sort of a shadow fuzzy on all texts and lines. This means that the fuser is misaligned: it is fusion toner to the correct places, but then also merge toner a milimeter or further down the page.

  The second type of ghost image may appear as a repetition of printing several inches higher, or to the previous page. This is a more severe form of alignment where Fuser is rolling through a quarter of the page and the merger of the excesses of toner of an earlier model.

  In both cases, you must replace the fuser unit.  If your printer is under warranty, HP should be good enough to send you a replacement unit. Otherwise, prices between HP and 3rd suppliers and 3rd party manufacturers will vary greatly, so to go around. Ovens may be available as standalone units or as kits which also includes supplies and replacement rolls. Decide what is best for you. There are YouTube videos that show you how to replace the fuser unit yourself, which is a bit like replace the toner cartridge, except the fuser unit is at the back of the printer.

  Good luck. And don't forget, the compressed air cleaning is harmless. Feel free to do it regularly. Your printer can handle very well.

• 2550n deaf then progressively less colored on the document of several pages and now none

  Problem started with the strange new relatively strong noise jerky rhythm while printing. All startup and systematic seems ok. Printed with success of State of supply and free page / test configuration at some point after the printer market but with a document of several pages, page 1A was perfect, lighter 2 page, page 4 and page 3 yellow and go progressively yellow fake only. Now it does not apply any at all what toner and paper appears as white as he went.

  Dark cyan is on (544 pages remianing EST) but no other warnings or lights newspaper correspondents.

  No idea how I confirm definitively what who is at fault? I have a service manual and am happy to tackle the problem, but with no printer engineering background would not know what was defective or not!

  Hi David

  No, the printer came not on loan.

  Engines operated but nothing changed.

  But wait...

  I used furry side (not spicy) velcro glued with glue to the impact. I chose this side because when I put a level on a sample of both, the soft side of fur was very slightly more thin.

  Put all back together and it works! Drum rotates smoothly, the warm-up is completed, ready light turns on and the pages of the file config/status and the real impression.

  The only differences are:

  1 / use velcro as opposed to slot the Chair or the foam cushion. The differences in thicknesses were low)<1mm) but="" may="" have="" been="" critical.="" my="" original="" worn="" pad="" seemed="" ok="" but="" was="" very="" thin=""><1mm and="" the="" first="" felt="" i="" tried="" was="" thicker.="" the="" foam="" was="" between="" the="" two="" but="" as,="" i="" said,="" even="" lifting="" the="" 'l'="" arm="" with="" a="" screwdriver="" failed="" to="" permit="" a="" free="" complete="" rotation="" without="" snagging="" when="" each="" toner="" passed="" the="">

  2 / when the solenoid is re-fixed, even if it has a hole and not a slot, which implies a position fixed, there is a small movement and so I shook at the limit of the upward movement in the hole so that the arm had a tiny less distance to be pulled up by the solenoid to release the carousel.

  3 / I cleaned up all the excess toner everywhere.

  I am indebted to you for your guidance, patience and the solution.

  I lost 100 + pages of each toner but the problem is solved.

• Print Photosmart 5520, 14 Chromebook and internet

  I bought a HP 14 Chromebook for mother's day so I could give my DIL my laptop Windows 8 because all I used it for was e-mail and internet anyway and she had needed a new so I thought, this the heck, let's get the Chromebook and check it out.

  I'm in love.  However, at the point where I just had a printer classic when I wanted to print, so I had to turn to my 8 year old office (now under Win 7) so I was able to print via the cloud.

  Recently, my old HP printer (can you tell I love the HP products?)  Nope, not a representative paid or brown noser - I know just a good product when I use one and saw that I was involved in computers since 83, I know a little about them) quit printing black that is really bad, so I decided to buy a wireless network.

  Without even really too attentive, I bought (I thought at the time) was a HP Deskjet printer - I need my copy and scanning - fax is not serious - and it had to be wireless.  I did not notice that what I GOT was the Photosmart 5520 with the ePrint feature.  I was in heaven.

  And it WORKED!  Except that... for 1 small problem... it will not print in color and it wouldn't print via the net (I understood the problem of the internet, btw, for those of you who experience this issue even - if you look at your choice of the printer, you will see your 5520 and who says 5520 (Networking) - make sure you select the one that says just 5520 - NOT the network driver).

  However, when I want to print color I spin on my desk of dinosaur and select the moment ungrayed to 5520 networked.  I figured out how to print 2 sides (too cool! Saving a ton of paper) not too bright on how slowly it prints my chromebook either - have not tried since my office again - it is connected wireless as well so it can print a little faster on a Windows-based computer.

  Regardless of all this - is it possible to print on the net so that it is in color without having to turn to my office, and then select 5520 Networking?

  Sorry for all the foreign info - sometimes I find I will mention something that seems out of place to me, but is in fact something with that someone is having a problem and get the answer they need.

  Anyway, in the hope of finding that I'll be able to print in color, even without turning on the dinosaur.

  Thanks for the help.

  Hi Jodi,

  I have a solution for you! My wife came home with a teal HP 14 Chromebook today, what a wonderful laptop! In any case, I added my ePrint printer and tried to reproduce the problem you described. Well, my first print job came out black and white, like yours. And I even made sure that I got the chosen color. I gave him another chance and took a slightly different path and it was released in color. Here's what you need to do... When the print window appears, on the scroll on the left down until you see "print using Google Cloud Print dialogue... ", then select it. Then, select your printer, and then change the color setting of Grey_CMY in color or Monochrome for black printing and true white.

  The print dialog boxes are not pair, I don't know why that is. There may be a buried setting or maybe it's just the way it is for now. If it's like that, it shoudn't be that way and will probably be fixed in a future Chome OS update. In the meantime, I'll post here if I find a permant framework.

• How to stop the print job on Laserjet Pro m1217nfw MPF

  I want to know how I can to pause the print job on my printer in order to return the page around and print on the other side. I read in the quick start guide and none of the buttons seem to do exactly that, the closest being the X button, but that cancels all the work print entirely. In other words, I tried to do is pulling paper out of reach, so he has to wait until I have insert new paper, but then when I reinsert the battery, it takes FOREVER to reset and go on with the work. I'm used to be able to do that on my old printer, since it had a pause button and he saved a ton of paper by allowing manual two-sided printing. Thanks in advance!

  Hello

  Based on the #73 of the following record page, you must leave it on the last page before manual turn up-side-down to print the other side.

  http://www.manualsprinter.com/manuals/HP/HP_LaserJet_Pro_M1217nfw.PDF

  If you want more control, you can divide a long document to a few small parts by sending several times to the printer you (for example, 1-40, 41-80, 81-120).

  Kind regards.