Never turn off display
my screen automatically goes on standby every 1 minute. I tried to go to control panel (change power settings). I went t maintenanace of system in Control Panel. He always does. Can anyone help. I want my screen to be open 24/7. He falls asleep all 1 minute while I watch a movie. I have to scrible wake him mouse. can anyone help please
Hi Ron21,
Follow the steps mentioned below:
Sleep and extended: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions
First, see if the problem occurs after Disabling the screen saver (by selecting the screen saver 'None'). If the problem persists, please turn off the sleep in the BIOS. To check the BIOS settings, please consult the user manual or contact the manufacturer of the motherboard.
In addition, please set the following group policy and see if the problem can be solved.
(1) please click Start, type group policy in the search box and press ENTER.
Expand the following item: Computer Configuration-> administrative templates-> system-> power management-> video and display settings
(2) double click on "turn off the display (plugged).
(3) change the setting to "Disabled".
4) click OK.
(5) repeat step 4 or 5 to disable "turn off the display (on battery).
In addition, you can test clean boot and see if the problem occurs. If the problem goes away in the boot environment, we can use a 50/50 to quickly refine approach which entry is causing the problem.
Reference:
Reply back with the results
Referring to the link: http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/b769d9b4-300e-4066-b071-da54926112d2
Tags: Windows
Similar Questions
-
Lenovo G400s optimize battery health auto turn off display
Hello
I rarely use my laptop outside the power adapter, so I decide to try the 'optimize battery health '.
To my surprise it drain the battery of 60% and he stopped there without discharge or charge, which is good.
But it has a few side effects, it turned off my screen every minute which is annoying, in my power Option, my screen is set to never turn when I plug in, I even try to define each presets/profiles of never turn off screen when the plug-in or battery, it helps not at all.
This could get really annoying when I read an article when my keyboard and mouse is not in use.
Thank you for your attention, the hope for a solution soon.
Details of the laptop:
Lenovo G400sCore i5 - 3230 m
Windows 8
8 GB RAM
128 GB SSD
1 TB HARD DRIVE
All the drivers/software updated
Energy management: high power Performance management, optimize the battery, drive energy-saving hard.
p/s: Please let me know if need more information, I will provide as much as possible to fix this.
Okay, my bad, it was my stupid screen saver settings that enable the return to the logon screen after 1 minute.
He was supposed to turn off when I set to (none) but I guess that I was wrong, in any case, this has been solved by "human error."
-
How can I turn off display tab page in Reader?
How can I turn off display tab page in Reader?
Found. Thank you. To disable the display of the tab, open Acrobat Reader DC, navigate to the Edit-> Preferences-> General-> uncheck "documents open in the new tab in the same window".
-
' Turn off display "intermittently stops working.
After time setting to turn off the display, the display will sometimes exit when its supposed to and sometimes remain running indefinitely. New resetting does not help, the behavior remains the same.
The setting is on my laptop in power "Balanced" plan the setting 'disable the display/Plugged in. " (Put the computer to sleep "Never")
Note, I also downloaded and installed Office 2010 beta.
Thank you.
Looks like a problem with your graphics card, update the drivers for your graphics card or reinstall them and check.
If you want to test your diet plan is working well, check the link below to change, create, or delete a power plan,.
http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-schemeKind regards
-
Windows 7 - screen goes to sleep when the parameters of plan of power has never turn off
Looking for some advice - we have screens that display information for visitors so that they must be all the time. The computers to which they are connected are on the network but connected with local accounts. We applied a number of parameters for the management of food, namely:
Turn the hard drive off - never
Sleep after - never
Allow hybrid sleep - never
Hibernate after - never
Selective suspension of USB - disabled
Turn off the display after - never
Despite the settings above the screens go blank and I have to move the mouse or press any key to wake up. It doesn't seem to be any obvious either pattern. Sometimes they remain turned on for 1-2 hours then go to sleep, other times maybe every 20-30 minutes.
I looked at several articles but could not find a solution that works for us. We tried to apply a GPO that defines power management in case something else might override the settings, but it did not work either.
The computers are running Windows 7 SP1.
Now I'm out of ideas. Any advice would be greatly appreciated.
Hi Gary,.
Thanks for posting your query in Microsoft Community.
I understand that you have problems with power settings across computers connected to a network.
The computers are connected to a domain network, it would be better suited to the TechNet community.
Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en/category/w7itpro
Hope it will be useful. If you still have questions, please reply and we will be happy to help you.
-
Power management: screen never turns off when it should
I have two satellites, and two of them, the screen turns off ever after the scheduled time. They did before. Any help here?
Hello
You said it worked in the past is the resettlement of the Toshiba power saver?
Have you tried it?
If Toshiba energy saver has been installed, then this application should controls display on/off function.There must be something wrong with some files or registry keys...
-
How can I turn off display on MacBook Pro when it is connected to the external display?
I recently bought an external screen made by HP and I have a problem. When I connected it to my MacBook Pro, I would like to turn off the display on the MacBook Pro completely, because it is a loss of power. I tried to turn the brightness all in low, but who is not actually turn off the display. Also, I tried many commands found on the web Terminal, and none of them does not seem to work. Does anyone know a solution?
All responses are greatly appreciated.
Test
-
Turn off display when you use the external monitor R61?
Hello
I have a ThinkPad R61, which I use with an external monitor. Somehow, I had in place for months with the laptop out of the screen and the monitor on. I've used today at a meeting to feed a projector, selected somehow dieting Fn F7 of presentation such as the screen and the projector are-as I wanted - then home, re-installed with my external monitor and cannot find out how to turn off the display on the laptop. The selections under Fn F7 do not allow this combination. I tried the trick you offered, Fn F3 to turn off the display, but it turned out the two views. (Now, how can I reverse this setting?)
It sounds like a requirement of switching every day, but I can't find a clue in aid of ThinkVantage, manual mini, on the website, etc. Thank you
WaynO salvation,
After pressing Fn + F7, click on manage plans... to open the Director presentation window. Then click the new... button. You should be able to put in place a system to only display on the external monitor. After setting up, make sure to check the box in the column Menu Fn + F7 to have your new schema appears in the menu when you press Fn + F7.
-
Is turn off display in the power settings is going to make me a little download speed
Hello
So, I'll have to download 30 GB of updates for a game and I want to take less time as possible. I was wondering if the display disappears will help. Is there another way to speed up the download?
Thank you.
No, turn off your screen won't help. The best way to get faster downloads is to contact your internet service provider. It is the bottleneck of your connection speed.
In addition, limit that uses your Internet connection. For example, do not play video games or watch Netflix in the lounge while you download on your PC online.
-
Windows 7 starter edition: sceensaver not committed and does not turn off display
I have Windows 7 starter on my Acer Aspire One. The display has stopped turn off automatically (as it is supposed, by the power settings) when the computer has been sitting idle for some time. I checked the power settings several times, as well as turned on the screen saver (but it won't commit). I checked the display drivers & they are up to date. I have not all connected devices that might wake the computer. I have not installed new software recently and have any kind of function "awakening." l normally play music by the bias of Windows Media Player or stream music online (Pandora and live365) when I fall asleep and so don't want to close the lid, but want the computer turns off the screen so that it would light up the room all night. Please let know us what could go wrong. Thank you!
Hello
Method 1: Run the troubleshooter of power
You can run the troubleshooter of power to set your computer's power settings. The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'.
http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter
Method 2:
Follow the post proposed by Serge D.
Hope the above information is helpful.
-
Cannot turn off display on the Qosmio G-series
Since loading Vista, Alt + F5 keys no longer work to turn off the screen. All ideas welcome.
Hello
that you have installed the version of value added package 1.1.7 for your machine?
It s available for download in the Section download Toshiba Drivers, so if it is not already done, please take a look here and download the VAP (ValueAddedPackage) to make your keys working properly.
Welcome them
-
Analysis the message. The printer display never turns off
I have photosmart all-in-one B211A..., Cq761A. My computer is the computer, and I use windows XP.
I get a message in the toolbar of the background screen where the scanner appears with a red x and saying that he could not be contacted.
I'm trying to get out and it is so fast and another pop-up screen appears which has nothing to do with it.
In addition, on the print screen will not 'sleep' mode. He did in a first time has since ceased when this thingee message began.
Hello debalas
Is the printer connected by USB or via the network? Have you tried to run the utilities diagnosis HP or HP print and Scan Doctor? If this isn't the case, you can find them on the link below.
-
ENDURANCE mode turns off display
Hello
I got my Z2 a little over a week ago and I noticed that when I have the STAMINA mode on my screen keeps expire every 5 seconds despite the settings being during 5 minutes. No one knows what it is and how to fix it.
Thank you
Reset endurance like this: first turn it off after that, go to settings-applications-all, do scroll up to approx. stamina tap on it and force clear data and stop. Restart the device and turn it on. See how it is.
-
Trying to create a new control and works with the triumvirate control/skin/behavior. So far, I think I understand how things work, but I have a problem that I can't decipher. On hover my order, I get the appropriate changes to the color, but out of the mouse, there is no return to the non-stationary State, and nothing I do seems to make a difference. Here are the relevant excerpts of my code, stolen mainly ChoiceBox and button as long (I'm working on a bit of a hybrid).
public class DropDownButton extends ButtonBase { public DropDownButton () { super(); setSkinClassName(DropDownButtonSkin.class.getName()); setFocusTraversable(true); } public DropDownButton (String text) { super(text); setSkinClassName(DropDownButtonSkin.class.getName()); setFocusTraversable(true); } public DropDownButton (String text, Node image) { super(text, image); setSkinClassName(DropDownButtonSkin.class.getName()); setFocusTraversable(true); } @Override public void fire () { } }
public class DropDownButtonSkin extends SkinBase<DropDownButton, ButtonBehavior<DropDownButton>> { private final StackPane openButton; private final Label label; public DropDownButtonSkin (DropDownButton dropDownButton) { super(dropDownButton, new ButtonBehavior<DropDownButton>(dropDownButton)); getStylesheets().add(DropDownButton.class.getResource("DropDownButton.css").toExternalForm()); getStyleClass().add("drop-down-box"); label = new Label("Foo Bar"); label.getStyleClass().add("label"); label.setMnemonicParsing(false); openButton = new StackPane(); openButton.getStyleClass().add("open-button"); StackPane region = new StackPane(); region.getStyleClass().add("arrow"); openButton.getChildren().addAll(region); getChildren().setAll(label, openButton); requestLayout(); } @Override protected void layoutChildren () { label.resizeRelocate(getInsets().getLeft(), getInsets().getTop(), label.prefWidth(-1), label.prefHeight(-1)); openButton.resizeRelocate(getInsets().getLeft() + getWidth() - (openButton.prefWidth(-1) + getInsets().getRight()), getInsets().getTop() + ((getHeight() - openButton.prefHeight(-1)) / 2), openButton.prefWidth(-1), openButton.prefHeight(-1)); } @Override protected double computeMinWidth (double height) { return computePrefWidth(height); } @Override protected double computeMinHeight (double width) { return computePrefHeight(width); } @Override protected double computePrefWidth (double height) { return getInsets().getLeft() + label.prefWidth(height) + openButton.prefWidth(-1) + getInsets().getRight(); } @Override protected double computePrefHeight (double width) { return getInsets().getTop() + label.prefHeight(width) + getInsets().getBottom(); } @Override protected double computeMaxWidth (double height) { return computePrefWidth(height); } @Override protected double computeMaxHeight (double width) { return computePrefHeight(width); } }
What is the mechanism that causes the return to a non-stationary State? What Miss me?.drop-down-box { -fx-skin: "org.smallmind.javafx.popup.DropDownButtonSkin"; -fx-background-color: -fx-shadow-highlight-color, -fx-outer-border, -fx-inner-border, -fx-body-color; -fx-background-insets: 0 0 -1 0, 0, 1, 2; -fx-background-radius: 5, 5, 4, 3; -fx-padding: 0.0em 0.5em 0.0em 0.0em; /* 0 6 0 0 */ -fx-alignment: CENTER; -fx-content-display: LEFT; } .drop-down-box:focused { -fx-color: -fx-focused-base; -fx-background-color: -fx-focus-color, -fx-outer-border, -fx-inner-border, -fx-body-color; -fx-background-insets: -1.4, 0, 1, 2; -fx-background-radius: 6.4, 5, 4, 3; } .drop-down-box:hover { -fx-color: -fx-hover-base; } .drop-down-box:armed { -fx-color: -fx-pressed-base; } .drop-down-box:showing { -fx-color: -fx-pressed-base; } .drop-down-box .label { -fx-padding: 0.166667em 0.333333em 0.25em 0.5em; /* 2 4 3 6 */ -fx-text-fill: -fx-text-base-color; } .drop-down-box .open-button { -fx-background-color: null; -fx-padding: 0.083333em 0.0em 0.0em 0.666667em; /* 1 0 0 8 */ } .drop-down-box .arrow { -fx-background-color: -fx-mark-highlight-color, -fx-mark-color; -fx-background-insets: 1 0 -1 0, 0; /* padding determines the size of the arrow; this should match the design size in the SVG */ -fx-padding: 0.166667em 0.333333em 0.166667em 0.333333em; /* 2 3.5 2 3.5 */ -fx-shape: "M 0 0 h 7 l -3.5 4 z"; } .drop-down-box:disabled { -fx-opacity: -fx-disabled-opacity; }
Any help appreciated.I don't know what that release or build you are using. All I can say is that it works on my machine. I run something close to b66 JavaFX 8.0. I had to make some adjustments. I moved
getStylesheets().add(DropDownButton.class.getResource("DropDownButton.css").toExternalForm()); getStyleClass().add("drop-down-box");
DropDownButton's administration and I got rid of the calls to methods that did not exist. My test program looks like this:
@Override public void start(Stage stage) throws Exception { DropDownButton btn = new DropDownButton("Test"); btn.setSkin(new DropDownButtonSkin(btn)); StackPane pane = new StackPane(); pane.setPrefSize(100, 100); pane.getChildren().add(btn); Scene scene = new Scene(pane); stage.setScene(scene); stage.show(); }
I changed the color of overview to red just to be certain that the style has been applied.
-
Can you turn off 'Display active' on Moto X 2?
I just bought a Moto X 2 and already find "Active form" very annoying. It lights when changes in Sun angles, the sun goes behind a cloud, a person walks by, or simply because he feels like it. Is it possible to completely disable "active view? I know there are for the old Moto X, but I have not found in any way on the new.
Thanks in advance!
It is in the application of the bike under view :-)
Maybe you are looking for
-
Costume: DDR3 SDRAM Modules
We use a custom Board on which we are interfacing modules DDR3 SDRAM to our FPGA processor. The following are our requirements DDR3 SDRAM module should be at simple level or double rank so unique rank is not available.The size of the module to 8 GB/1
-
Somehow the log information web interface no longer works. How do you get a discount for the following printers cold? HP Laser Jet 700 M712dn and HP CP6015x
-
I can guess that relates to all the questions that I have as follows; These are being administratively and come in last in the top seven, they are not here in perfect order I jumped on a couple. I understand that these contained the most critical new
-
How can I scan multiple pages on my HP Photosmart B210 to a document.
-
with the box navigation pane, is not on the windows messaging
Inbox, sent items to send etc navigation pane is missing from windows mail. Could not find the way to running.