M251NW: windows 10

Similar Questions

• LASERJET 200 M251NW: LASRJET m251nw 200 Driver WINDOWS 7

  I have a printer LaserJet 200 M251nw, I've had for several years.  I recently bought a new computer and am running windows 7 64-bit, however; I can't find the drivers for the printer anywhere.  I don't have the CD so that is not an option.  Can someone help me please?

  Thank you

  Steven

  Hi Steven,

  Download and install the latest version of the software below:

  http://ftp.HP.com/pub/softlib/software13/COL44388/LJ-107657-3/LJ-Pro-200-Color-M251-Full-solution_15188.exe

  Note: for a USB connection, do not plug the cable until the installation invites you to do so.

  Kind regards

  Shlomi

• Windows 8.1 Surface RT and LaserJet Pro 200 (M251nw)

  Hello

  I just got today the printer (Color LaserJet Pro 200, M251nw).  I can't find the driver for Windows 8.1 RT.  Can you point me to a place I can download the driver from the RT?  The compatibility of Microsoft site says it's compatible...

  Thank you!

  Stacey

  @Stacey_CA

  The RT surface of windows is a basic tablet arm and use the drivers included in your operating system (in-os drivers). Please use the document below to help you to install the driver that is included in your operating system. You don't need to download anything.

  I install the driver included in windows 8.1

• HP Laserjet Pro M251nw color: How can I get my printer to work with Windows 10

  I can't get my printer to work, it is installed, I have updated the drivers, I get a message that it is not connected - I did it is certain

  Hi @jotsol,

  I see you are having problems printing from Windows 10. I'd love to help you.

  I wasn't sure if you meant that you run Windows Update to update the drivers or downloaded the last.

  I would say to uninstall all old software of the printer, if you updated to Windows 10. Then, download and install the latest drivers from HP. color HP LaserJet Pro 200 M251 series full feature software and drivers.

  Download and run the print and Scan Doctor, he will diagnose the problem and could solve it automatically.

  How is the printer connected? (USB, Ethernet, WiFi)

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.

• Print on the two option (duplex) sides missing Mac 10.8 for LaserJet Pro 200 M251nw

  I just purchased and installed a printer LaserJet Pro 200 color M251nw.

  From a Windows 7 machine, the properties of the printer box allows an option (I think on the finishing tab) for printing duplex (manual), which when used will then display a screen printing by telling you how to remove paper from the output tray and reload at the entrance, then press ok to continue with the other side of each print sheet.  I tried my laptop and it works fine.

  Even if it is a manual process for this printer, I would really like to be able to do when printing from my Mac, but it doesn't seem to be a way to select duplex printing.  Is it possible to have this feature?  Is there something I need to set differently on the printer?  It would be really useful.  Thank you.

  Hello
  The two-Sided feature reffer automatic two sided printing.
  As the specific device provide printing manual duplex only, you can perform duplexing manual as follows:
  
  In order to perform manual duplexing, Joanie you use the Pages to the printer setting, you will find listed in the manual duplex printing sectiong below:
  http://support.HP.com/us-en/document/c01663233
  
  Kind regards
  Shlomi

• "Error 49 - Turn Off Service, then press"-M251nw LaserJet200

  HP Laserjet 200 - M251nw series

  OS X 10.7.5

  The printer keeps displaying:

  "49 Service error - turn power off then on.

  I bought the printer a Best Buy only 4 days ago new.  Only the first night the printer work properly.  I installed it on my wireless network and never plugged the USB cable during installation, as suggested in the installation guide.  As I said, the first night, it was fine.  Printed everything fine, apps worked top (still do actually), and the printer I slept very well that first night.  He never woke up (as I know).

  Now, he will not sleep.  Nothing has changed on my computer, but now I have the "49 Service error."  I have no way of knowing what that means that even.  She will run her mistake, and if I don't get to her in time (only about 30 second window turn off while he says this), it will turn off and restart.  After reboot, it shows the homescreen very well for about 3 minutes, then gives "ERROR 49", and the cycle starts again.  This happens about 50 times a day now.

  I unplugged for several hours at a time, the printer will behave for about 30 minutes, and then start the cycle again.

  I turned off the wireless on this subject, still happens.

  I checked and ran an update of the firmware on it, still happens.

  I turned off the wireless on my computer (just in case he called to the printer), still happens.

  I've uninstalled and reinstalled the drivers on the computer, still happens.

  On another note, I have to reinstall the drivers, whenever I want to print it seems.  If I let it sit for a day, the computer can't find the printer.  Even if that nothing has changed.  I do not close my computer, if the drivers are not lost, I turn off the printer (I try to let him sleep, but it will not), but when I go to print, the printer "can not be found", and the document will sit for 15 minutes before giving the impression that and start troubleshooting.  Even while the computer and the printer are on the same network. To get an impression, I launch a round of restarting my computer after uninstalling the drivers and unplug the printer power cord.  After that I feel, the printer is fine for about 20 minutes, then again any mistake about me.

  I am very frustrated with this situation.  I'd like to think that just, I have a printer of bum, because the print quality is really outstanding on this thing, and that's exactly what I was looking for, but I can't deal with this much more.

  Help, please!

  After hours of messing around with these printers, here is how I solved the problem of the 49 service error...

  I unplugged the network cable from the printer, then created a network of peer to peer directly from the printer to my laptop. I had to manually assign an IP address from my laptop.

  For example: the printer had a manually assinged IP of 192.168.10.45. Subnet: 255.255.255.0. Default gateway: 192.168.10.1

  I plugged a cable ethernet directly from the printer to my laptop and assigned to my laptop the following IP model:

  IP address: 192.168.10.35

  Subnet: 255.255.255.0

  Default gateway: 192.168.10.1

  Then I logged on the interface chart user of the printer by typing 192.168.10.45 in Internet Explorer. Under the 'Network' tab, I clicked on "Advanced" in the left menu.

  Then I unchecked all the "features" except "IPv4", "DHCP" and "printing 9100. Let those audited.

  After clicking 'Apply', I have connected the printer to the network and everything works great.

  I guess you can reactivate the other feautures to please "Airplay."

  Don't know why HP comes with all these processes... He has this hassle and creates so many problems.

  If you have any questions do not hesitate to contact me at {{Personal Information deleted}}

  ~ Chris

  Network of elite technology

  IT consultant

• HP LaserJet Pro 200 color M25: installation printer HP Laser Pro 200 M251nw.

  M251nw color HP LaserJet Pro 200 No. product installation. CF147A: Installer said he has successfully installed my printer, but then the printer to add it to the window that says it can't find printer.  HP said I have to get my license from Apple. Apple says that I have to get my HP permit

  Hi @steeldrv ,

  I understand that you are having problems, adding the printer on Mac. I will do my best to help you.

  How is the printer connected? (USB, Ethernet, WiFi)

  I checked online and there is a form available full functionality driver HP.

  What is the software you have installed already, who says it was successful?

  HP LaserJet Pro 200 color M251 full set Solution software - Mac OS X 10.6, OS X 10.7, OS X 10.8.

  Try the following steps:

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Were you able to find and add the printer in?

  Print a self-test of the printer to make sure this isn't a hardware problem, causing the printer does not detect.

  Print a Configuration report.

  If the printer is networked, try and access the Web built-in to the printer server.
  Type the IP address in the address bar of your web browser. (Safari)

  It loads the page Web has?

  Please let me know the results and the way that the printer is configured, so I can provide appropriate measures to solve this problem.

  Good day!
  Thank you.

• Color HP Laserjet Pro 200 M251: HP Laserjet Pro 200 M251nw print pdf with OffBeat foot

  Printing documents PFD with the quirky footer al the way to the top.

  Print the pdf as image only pages, then the foot rest where it belongs.

  Hi @Martinkoopman,

  Welcome to the Forums of HP Support! I see when you print pdf documents to your HP LaserJet Pro M251nw Color it prints with the footer moved all the way to the top.  If you print as an image only it remains where it requires.

  1. what program you are using to print PDF files from?

  2 have you tried to update the program?

  3. this happens in all programs or just one?

  I would like to run you HP print and scan doctor > www.hp.com/go/tools- it was designed by HP to offer users troubleshooting and characteristics of fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  What are the results? I'll watch for your reply.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution". If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say thanks for my effort to help, click on the "Thumbs up" to give me a "Bravo".

• HP LJ 200 Pro M251nw: M251nw - change from usb or wireless connections

  My company has 4 printers HP Laserjet Pro M251nw 200. All of these printers have been previously configured as USB or wireless.  We now modify the connection for all of the printers for wired networks.

  I already tried uninstalling a wireless printer and reinstalling like wired, but one that results in the computer/printer does not queue jobs.

  What is the best way to change the connections wired to previously installed printers?

  Hello @BBMGRNR,

  Welcome to the Forums of HP and thanks for posting!

  I want to help you with questions that you may have installed your multiple HP LaserJet M251nw computers via a wired connection for Windows 7 computers.

  At any time that you re-install the printer with a different connection type, you run the risk of ending up with multiple instances of the printer in your Devices folder. Just, this tends to create confusion, you might accidentally selecting your previous connection to printer and nothing will be printed.

  What I recommend to do is uninstall the software completely of all calculated, like this you can eliminate confusion for the users of these computers. If you need help on the uninstall process, you can follow the steps described here - HP monofunctional and Printers Multifunction - uninstalling the printer software

  I also recommend to download the latest software, rather than using the original CD. You can download the latest version for your printer in this case - color HP LaserJet Pro 200 M251 series full feature software and drivers

  I hope this helps!

  

• HP LaserJet Pro M251NW Laser printer

  Hello

  Quick question (v5.5) HP Universal print driver will work for HP LaserJet Pro M251NW Laser printer? I can't find it on the list of compatible printers, I guess because I think it is quite a new model.

  Kind regards

  Ross

  You can try, but I don't think it will be.  It seems that this printer will not work with PCL 6 languages and more.  It looks like version 5.5 running PCL 5.  the next version to the top (point 5.6) should be able to run it.  I'll link the UDP protocol which is compatible with the printer below.

  HP for Windows PCL6 universal print driver

• IMPOSSIBLE or CAN NOT install printer Windows 8 is called a Kernel Mode driver

  Very similar to this topic.

  None of the solutions provided works.  I wish I could get a screenshot, but it is a computer, I was working on a friend and won't go back for a few days.

  • I tried the things:
  • Download latest version of the driver Windows 8 x 64 absolute of the HP website for the printer in question (color hp laserjet pro m251nw).  Tried the two 'single driver' and «full installation» downloads
  • Tells Windows to use a driver from Windows Update.
  • There is no Citrix based application to uninstall anywhere on the computer.
  • The computer is Windows 'standard' 8 - so using GPEdit to disable "Disallow installation of printer kernel-mode drivers" was not an option (although I used a 3rd party GPEditor to try to change this setting, in any case, nothing is done).
  • I used Advanced Startup to start without driver Signature check.
  • Disabled prevents anti-virus software for to ensure that he was not.
  • I am confident that the local user on the computer had all the permissions in the menu devices and printers.
  • I tried to install everything using the "right click / Run as administrator."
    I tried to install using the XP SP3 and Windows 7 Compatibility Modes.
  • I made sure that there is no files in the folder of print reels (C:\Windows\System32\Spool\Printers\). and reset the print spooler.
  • I am able to ping the network printer and it prints the test pages, I do not believe it to be a problem with the printer itself, just a strange setting cause me all these problems.

  Help!  I'm an IT Pro, but I spent 3 hours on this and I'm not used to being totally defeated!  Haha

  Thanks in advance for any advice!

  Hello

  Thank you for keeping us posted.

  I would have you post here for assistance more.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  We know if you need help.

• About this Mac window

  A week ago I updated my Mac Mini end of 2014 to Sierra and, among other drawbacks, I found that the "to comments of this Mac window" doesn´t show when it is called. In addition, the button of the substitution of Apple ban on which they consider unreliable applications (i. e.  those not manufactured by Apple or not using the iTunes channel) is now gone and I won't unintentionally control I have in my computer. In this case, this means that I can't update latest version of Penny Fletcher of his useful Multimarkdown application.

  You can adjust your settings to allow internet content to other websites by clicking on System Preferences > Security & Privacy > General and down, adjust the setting "allow applications downloaded on:

  To call ' about this Mac' Panel, press the black Apple > about this Mac

• I resized the Partition Mac to make more space for BootCamp and now Windows will not boot

  On a collague MacBook Air running 10.11.4, we used disk utility to reduce the Mac Partition so that we could then use a Windows tool to extend the BootCamp partition. However, upon restart, we got a BACK screen with the error that Windows cannot start because it cannot find the boot device.

  Help, please?

  This is not a mechanism supported by Apple to change the size of the Windows partition. Apple supports the remove/reinstall only.

  We try to remedy. Please after the release of the following OSX Terminal commands.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  What is the model/year of the MBA? Please, do not post the serial number of your Mac. Orders 'sudo' will ask for your password.

• After recent, iPhone, 6, update, Windows, Explorer, does not work, see, iPhone

  I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone.   iTunes sees it yet, but windows Explorer does not work.  It seems that some setting has been broken through the update of ios.  A way to solve this problem?

  Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?

  TT2

• How to prevent the automatic launch at windows startup 10 itunes

  I have the latest version of Windows 10 and the latest version of iTunes on laptop Lenovo 2015 of 64-bit model.

  How can I prevent iTunes from launching at startup of the system?

  Try this...

  1. Right click on the taskbar.
  2. Select the Task Manager.
  3. Click the Startup tab.
  4. Click the iTunesHelper app.
  5. Click the button disable.
  6. Close the Task Manager.