M2N78 - Upgrade (Violet6)

Similar Questions

• BK168AA: HP Pavilion p6404y Desktop PC

  I scoured Internet only to find no real solution for my problem.  My computer will only start in the HP splash screen. When executing the key F9 Diagnostics appeared an error: BIOHD-2 error code.  This code means something different depending on who you ask or when you get your information. I replaced the HD, results end up the same way - Splash Screen only. I tried to buy a recovery CD since I do not think to make one and was informed by HP that the disk was no longer available, because my PC is more than 6 years old.  I would appreciate some advice on how to move forward with my computer or if someone could tell me where I could buy a recovery CD.

  Hello:

  I think that you would raise a lot of money after bad by Purchasing recovery disks.

  Yes, normally the BIOHD-2 error means that the hard drive has failed, but in your model that has card mother Violet6-GL8E, this means that the drive controller on the motherboard has failed.

  Must be a very common problem, because there are dozens of members of the forum who have HP PC with this motherboard model.

  You can do a search in the forum keywords: M2N78-(Violet6) and find all the tales of woe.

  Here are a few to get you started...

  http://h30434.www3.HP.com/T5/desktop-boot-and-lockup/mobo-SATA-controller-failure-HP-P6313w-M2N78-la-violet6/m-p/1337533/highlight/true#M17827

  http://h30434.www3.HP.com/T5/desktop-hardware-and-upgrade-questions/high-rate-of-motherboard-failures-in-the-M2N78-la-violet6/m-p/2332801/highlight/true#M59175

  http://h30434.www3.HP.com/T5/desktop-hardware-and-upgrade-questions/M2N78-la-Violet6-doesn-t-recognize-drives-solution/m-p/1482215/highlight/true#M48225

  http://h30434.www3.HP.com/T5/desktop-hardware-and-upgrade-questions/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see/m-p/181716/highlight/true#M13661

  To resolve the problem, you will need to replace the motherboard.

  A few people tried to buy a disk controller sata PCI-e x 1 hard, but I don't think anyone got those to work.

  If you decide to replace the motherboard (which I don't recommend) and wish to purchase recovery discs, you can still get this provider no HP.

  http://www.computersurgeons.com/p-22628-Windows-7-64-bit-recovery-kit-b7c92av-for-HP-Pavilion-Desktop-PC-model-number-p6404y.aspx

• Compatibility of proc error

  I currently have a desktop computer HP P6404y with a Phenom II X 4 820 running Windows 7 64 bit Edition home premium.

  My system was either not boot the operating system when I try and run a game or sit on it too long and have several things open the system will crash. I ran a diagnostic on the system and the hardware/software is says Core 2-3-4 of my proc lost symmetry, which explains why it stops randomly.

  I checked the specifications of the motherboard (M2N78 - THE Violet6) and it has a socket AM3 and is supported by the Phenom II X 4 9XX series processor. I bought a Phenom II X 4 965, which is a compatible AM3 processor, but when I put it in I immediately get an error saying the processor is not compatible. I called AMD and they confirmed that it should work, but there is a certain type of thing with the BIOS that allows to not work and they thought that HP had a fix. I couldn't find something that helps me this online and I have upgraded the BIOS to 5.16, but I did Exchange yet because I don't see anything in the update that said fixed compatibility.

  I called HP and they said apparently they have fertile procs that you can get through them, which makes no sense to me, but if it's true it's true I guess that.

  Is it possible that I can get the proc that I have to work with this computer? Thanks in advance.

  Here are the specifications of your HP Pavilion p6404y desktop computer and its card mother M2N78-(Violet6). According to the specifications, the following processors are supported;

  This motherboard supports only the AM3 processors

  AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (Deneb)

  AMD Phenom II X 3 Triple-Core (Heka) 7xx/7xxe

  AMD Phenom II X 2 5xx (Callisto)

  AMD Athlon II X 4 6xx/6xxe (undactylopodite)

  AMD Athlon II X 3 4xx/4xxe (Rana)

  AMD Athlon II X 2 2xx/2xxe (Regor)

  At the same time, I think the specs, said a maximum TDP of 95 watts but I could be wrong. In this case the maximum TDP would probably 125 watts. Based on the site Web of AMD, there are only two AMD Phenom II X 4 965 CPU. One is rated at 125 watts and the other is 140 Watts. Both are 'Black Edition' CPU, which means they have an unlocked clock multiplier and are designed to be overclocked. Very little HP computers have options overclocking and yours is not one of them.

  The AMD Phenom II X 4 965 CPU is probably incompatible with your computer p6404y HP because of that;

  (a) it exceeds the maximum. PDT to the motherboard

  and / or

  (b) there is a "Black Edition" CPU

  Please consider buying one of these 95 watt AMD Phenom II X 4 processors compatibility assured.

  Please send Bravo

• Hard drives can be switched?

  I just bought a new Pavilion p6 2376PC with a card mother Pegatron AAHD2-HY (HOLLY2) and the computer itself works very well I'm not at all happy with Win8.I have also an old P6310yPC of flag running Win7 with a card mother Pegatron M2N78 - LA Violet6 who has malfunctioned. Both cards have the same processor and memory. The only real difference is the embedded video.

  I would like to know if it is possible to replace the Win8 HDD with HDD Win7? Are there real differences between the two mothers who cause the Win7 disk not work correctly?

  For any help or suggestion would be appreciated.

  Bob

  There may be several reasons why it won't work, but most would be the OEM Windows license does not.  There is the problem that many face on the drivers for all the hardware.  I've given people complain about Windows 8 and wanting to come back not Windows 7, but you really try some of these tips: http://reviews.cnet.com/8301-33642_7-57496506-292/how-to-get-the-start-menu-back-in-windows-8/

• Pavilion A4316F Desktop with M2N78-(Violet6) card mother CPU Upgrade

  I looked at the HP Site before making the CPU to upgrade to purchase (http://support.hp.com/us-en/document/c01925562) my office.  I bought an AMD Phenom II x 4 processor clocked at 3.4 Ghz.  When I installed the CPU and try to start, I have a unknown, computer processor stop error.  From what I can tell on the HP site, this processor should work with this motherboard.  Any suggestions?

  Please provide the role other than whole or number of the plateau of the AMD processor for our review. Only 3.4 Ghz AMD Phenom II x 4 processors I know are the 125 watts Note: AMD Phenom II x 4 965 Black Edition and the140 watts Note: AMD Phenom II x 4 965 Black Edition. None of these processors are compatible with the Violet6 motherboard in your system. The card mother Violet6 is intended to be used with processors up to 95 watts. In addition, "Black Edition" CPUs have discovered clock multipliers to be used in overclocking, but does not support the Violet6 overclocking motherboard.

  Please consider these 95 watt AMD AM3 processors except CPU 'Phenom II X 6' and processors ' B #

• M2N78 - THE violet CPU Upgrade? I bought an AMD Phenom Quad Core 9850 (Agena), but is not compatible?

  I have the HP Pavilion p6116f.  I tried to upgrade the processor and bought the AMD Phenom Quad Core 9850 Agena from tigerdirect.com, firmly believing that he was compatible in my sytem.

  http://support.HP.com/US-en/document/c01635734#n92 care of upgrading the card from my mother. The processor I bought was listed as compatible equipment, but after having tried several times to install it, I sent the object.

  I later learned that the 9850 Quad Core has been made to the 125 watts instead of the 95. Is this the reason why it is not compatible with my system? If anyone knows upgrades processor of success for this advice, please let me know.

  Hello

  It is very possible that HP has published false information.  The original processor for your PC has a TDP of 95 watts and is the card mother socket AM2 +.

  All these AMD processors are embedded for AM2 + with a TDP of 95 watts.  Remember that you have the latest version of the bios installed on your PC.

• upgradeing ram important issue and other questions

  I have a p6310f of hp with stock mobo and ram 6 GB with a testing latancy or 7-7-7-20 if I upgrade the RAM to 16 gig with say 11-11-1127 latency going to work? also I and looking to change my case to something big to contain all my parts which would be most effective, I need that would be gamming cooling fans high quality events ect and built in the management of the psu cables and also lighting case on board. and I intend upgradeding my diet for a modular what power should I get because I want a power upgrade, but do not want a lot Finally I plan to upgrade my cpu which is the best that I can get that to work on a stock hp p6310f mobo and I also chip new plan what could get for said of cooling water id perfer a all-in-one, when I'm very new to the cooling water. manythanks to a guy who has had great love for hp and got a support from you wonderful people!

  EDTII

  Here are the specifications of your HP Pavilion p6310f desktop and it is card mother M2N78-(Violet6). According to specifications, your computer will support the following improvements;

  CPU / processor;

  Max TDP = 95 Watts

  This motherboard only supports AM3 processors.

  Supported memory is limited to DDR3 modules only.

  HyperTransport 3.0

  AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (Deneb)

  DIMM / memory;

  Four DDR3 DIMM sockets (240 pin)

  DIMM types supported: PC3-8500 (DDR3-1066) PC3-10600 (DDR3-1333) or

  Non - ECC, unbuffered single memory

  Supports 1 GB, 2 GB and 4 GB DDR3 DIMMS

  Dual channel memory architecture

  Power supply;

  All ATX12V v2.3 power supply about the same size as your original factory supply. The rated power is really depends on the requirements of the graphic card installed on the computer. In general, the Corsair CX500, or CX600 are highly recommended and known to fit most HP consumer. It seems that Corsair has recently expanded the range of CX to include some modular power supplies.

  Graphics card;

  Almost any PCIe x 16 v2.0, v2.1 and v3.0 should work on your computer. The games current and/or futures contracts, you intend to play will determine what graphics card, you must install. As you like it is a "gaming platform", I would use a Nvidia GTX 550 Ti, GTX 650 Ti, or more... or an AMD Radeon HD 6770, AMD Radeon 7770 or higher.

  If you really want to use a new case not HP and the water cooling, I wouldn't bother upgrading your HP p6310f. Instead, I'd build a new system of measurement from the ground upward. This will allow you to use the latest available technology.

  Please send Bravo

• Upgrade processor for the Pavilion P6320Y

  Hello

  I want to move my computer to the AMD Phenom ii x 6 1065 t 95w cpu can I do this? His mother is the motherboard The M2N78-(Violet6). The Council is an AM3 with an envelope of tdp 95w so the new processor that fits.

  I upgrade the bios?

  Any information to support the people here would be appreciated...

  Thank you

  Gary

  Just called and told me the 1065T 95W HEXACORE will work in the purple motherboard 6. It takes a 95W CPU.

  No upgrade needed BIOS.

  Thank you

  Gary

• To all with fan CPU M2N78 - evolving speed

  Many positions, there is a common factor, the mother of Violet M2N78 - LA infamous.

  If you have a plus BIOS version 5.14, you will have this problem (according to my research).

  It started with BIOS 5.16 and other BIOS updates have published this bug.

  (Added the next day, in order to clarify the question).

  Many messages of this referenced forum that users had updated their BIOS. After this upgrade, the CPU fan began cycling up and down repeatedly. I took all of these posts and analyzed them, looking for a common point. All users have the motherboard M2N78 - violet. Upgrading the BIOS is 5.16 and higher.

  Searching the Internet with this number of BIOS, I found many references to a "bug" apparent in the upgrade. The respondents have all sought 5.14 BIOS to fix this problem.

  Hello

  I've alerted HP to maybe look into this issue.

• HP pavilion p6226it: can I upgrade my pc with a new graphics card?

  Hi, I have a hp pavilion p6226it, I would like to know if the graphc 7750 HD card would go well on my old pc.

  matherboard: M2N78-(Violet6)

  Processor: AMD Athlon II X 4 620

  RAM: 6 GB

  Graphics card: HD 4650

  Same expert people told me that I could have problems because of my matherboard and bios (I've never updated), is this true?

  @antonmartino,

  Hi again.  Just below the section for memory you'll find.  What you can do is take existing specifications and the specifications of the motherboard and see what card maximum that you can put in the slot.  The only thing you want to look at is what is the power required by the new map you found and if the power supply has enough power to stay with her horse.  If you talk to any place of the computer with the specifications of this page, that I gave you, they can give you the best option.  What I do is take the listed specifications of the card and match the cards, in that you are looking to put.  Check to see if it's the same dwelling and look to see if they require the same requirement for voltage and they should work perfectly.

  I hope this helps.

  Thanks again for the post and have a great day.

  HP Pavilion p6226it Desktop PC product specifications

• Need sata drivers for Pegatron M2N78 - LA for Win7

  I need sata drivers to an installation of windows on a HP Pavlion Elite m9350f with a mobo Pegatron M2N78 - LA, does anyone know if Win 7 drivers are available for this?

  Windows 7 should not require drivers SATA install mother M2N78-(purple) on the map. I installed Windows 7 and Windows 7 SP1 several computers with the M2N78-(purple) and motherboards M2N78-(Violet6) without the need for any additional drivers. If you have any questions, please describe in detail the problems and/or messages that you receive.

  Please send Bravo

• Pavilion a4302f upgrade

  I was looking to upgrade my Pavilion with a new power supply (corsair gs600w) and a new videocard (powercolor radeon hd 6770) I'll also put the cpu to an Athlon II x 4 645 Athlon II x 2 240 already in it. These hardware upgrades will be not compatible with my system?

  These hardware upgrades will be not compatible with my system?

  1 corsair gs600w

  2 Powercolor Radeon HD 6770

  3 Athlon II x 4 645

  ' 1. the Corsair GS600W is 5.9 "x 3.4" x 6.3"and 6.3" can be a bit long. This can interfere with the CD/DVD drive, you won't have room for the power SUPPLY and/or the CD/DVD of wiring block, and it can interfere with connections to the motherboard. Highly recommended and favorite forum are the Corsair CX500 and CX600 which are a little more short 5.5 "long.

  2. the Powercolor Radeon HD 6770 should work without problem.

  3. the Athlon II x 4 645 should work without problem. The following CPU of (estimated at 95 watts or less) should work in your Violet6 m/b;

  AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (Deneb)

  AMD Phenom II X 3 Triple-Core (Heka) 7xx/7xxe

  AMD Phenom II X 2 5xx (Callisto)

  AMD Athlon II X 4 6xx/6xxe (undactylopodite)

  AMD Athlon II X 3 4xx/4xxe (Rana)

  AMD Athlon II X 2 2xx/2xxe (Regor)

  I have the same motherboard in my p6320y and it came with an AMD Phenom II X 4 820 CPU Quad-Core 95w.

  Frank

• a4302f Pavilion upgrade video card

  I have Pavilion model a4302f and I wanted to update the video card and I found one and I wonder if it will be compatible will be the Galaxy 55NGH8HX4NXK GeForce GTX 550 Ti (Fermi) 1 GB 192-bit GDDR5 PCI Express 2.0 x 16 HDCP work? My motherboard is the pegatron M2N78-(VIOLET6).

  Hello

  Now that I know what your question is really, Yes, I think that this video card will work perfectly with a 400W or better food.

  It's a nVidia card, enter a PC with a nVidia chipset. The PCIe slot on the motherboard based on the age of the PC should be 2.0/2.1.

  Paul

• Need driver for NVIDIA GeForce 9100 chipset. HP - M2N78-(purple).

  I just replaced a motherboard in an a6720y and has been sent to the bad part, but I don't have time to get the older Board.  I'm not sure what HP this motherboard is supposed to belong to, so I'm unable to find the appropriate drivers for it.  Can someone help me find them, please.  The motherboard is:

  HP Pegatron M2N78 - Violet6-GL8E N9100 AM3 MOTHERBOARD

  Hello

  It should be this one

  http://www.nvidia.com/object/Win7-WinVista-64bit-275.33-WHQL-driver.html

  Concerning

• My computer HP P6130y upgrade

  I'll upgrade my P6130y HP computer. But the first thing I want to know is in this case the GTX 460 and 550w power supply work with her.

  Right now I have:

  Motherboard
  M2N78-(purple)

  Processor
  AMD Phenom X 4 9750

  Integrated with nVidia GeForce 9100 graphics
  Also supports PCI Express x 16 graphics as independent graphics card

  I want to get is:

  Graphics card GeForce GTX 460 with the 550w Power Supply Corsair CMPSU-55OVX 550W ATX12X

  http://www.Newegg.com/product/product.aspx?item=17-139-004&SortField=0&SummaryType=0&PageSize=100&Pu...

  Hello karen445, here is the link for the specifications of your system.

  Here is a link that can provide some information about this model of video card.

  It seems they recommend at least a 500 Watt power supply. The Corsair 550 would support their recommendation.

  The only problem that can occur is the length of this card. These high-end cards are quite long and may not fit inside your case. You can measure from the end of your business where the video card needs to be installed at the front of the case at the end of which would be installed and see if you have enough room for this video card card.

  As many providers offer this card, some may have this model which is shorter than others.

  You should also be aware of the increase in the heat generated by the video card and the power of higher capacity.

  It may be necessary to add an another case fan to remove this extra heat. I suggest the warmth of surveillance and know if a fan for extra cooling is necessary.