m375nw MFP
Line of printing a scanned document.
I can scan/copy of the flat bed without line
I can pring without line
When I scan from the document feeder I get a black line.
ADF also copy lines? Maybe the adf scanner is broken.
Tags: HP Printers
Similar Questions
-
LJ Pro 300 M375nw MFP: e-mail address?
How can I find the e-mail address for my printer? Thank you.
Hello
You can find the email address of the printer in two different ways. The first is to connect to your account connected HP and look on the page of the printer for the e-mail address. The second is to press the button on the front panel ePrint and it will display all the information services of web Printers .
Kind regards.
-
Color LaserJet Pro CM1415fn MFP - professional printer with just a feeder?
I'm confused. He is a professional office color printer - which means that a number of print media will be used to print on a daily basis.
And after buying this printer at Amazon, I discovered that there not a manual feed tray and one paper tray.
I have print of legal documents - copy desk in our records, on cheap paper, a paper of good quality to the client and an envelope.
So I have to print a simple letter to remove and replace the Board THREE TIMES. This is not good.
My simple Canon printer internal, or any other printer I've seen ALL have manual power option.
QUESTION: could you please let me know if there is an attachment to this printer that would allow me to print manually, or should I send the printer to the shop?
Hi GarryStotel,
No, this printer does not have an add on the extra add envelope feeder on the plates as accessories. Looks like you need a little higher level printer as one of the following units (color HP LaserJet Pro 300 M375nw MFP color HP LaserJet Pro 400 M451dn printer) I included a link to your review these printers below.
LaserJet CM1415fn:
Overview
- Print, copy, scan - in color - and fax, with the first HP LaserJet printing from the Web and mobile devices. To connect to a wired or wireless network. [4] using a screen color touchscreen to print sharp documents. Save energy and reduce your impact.
Ideal for the
- Companies that are looking for Wi - Fi and networking in a color multifunction capable of printing from the Web via a touch screen and applications and mobile devices.
Features
Put easy, touch screen, print on your desktop.
- Use business apps and the 3.5-inch (8,89 cm) color touch to access and print the information on the Web. [7]
- Stay productive on the move. With HP ePrint, now you can print from virtually anywhere. [6]
- Now with AirPrint™. Simply print wireless from your iPad®, iPhone®, iPod Touch®. [9]
- Spend more time on the business and less time on the program of installation and maintenance.
- Easily copy on both sides of an ID card to a front document.
-
My print monitor gives me the message: "cannot delete"nomdefichier.pdf"Job #255 is already cancelled - cannot cancel."
General information: I used our printer range color M375nw MFP HP LaserJet 300 for the last 4 months with a Wi - Fi and it played beautifully. We ship these jobs for PC and Mac. Last night, I sent several files of my iMac to print; in the middle of the process, the printer ran out of ink. I changed the toner and began to print again. The first file I sent was being in A4 format (which I didn't notice when I sent). The file printed, but was very slow. Then the printer hung up after printing a different file. I tried to cancel printing the monitor said was the next file in the queue, but I got the message "job #255 is already cancelled - cannot cancel.» I was able to cancel all remaining work in the queue, but not this particular task. I restarted my Mac and the HP printer, nothing helps. We have been able to print from other devices (a laptop and an iPad) but my iMac is recalcitrant. I am able to connect to the printer, but cannot delete this work. Any suggestions on how to clear this work will be most appreciated.
P.S. This thread has been moved from LaserJet Compatible Macintosh - moderator Forums of HP products
You can try to remove the printer from the Mac and then recreate it with the same driver and settings.
-
Bike constantly, the power display "49 service error - turn off the power, then press ' on-screen before stopping.
For this printer only when it is connected to the network. Quite happy to sit quietly when printer NOT connected to the network.Unplug the network cable from the printer, check and clear all print queues (there may be a doc pdf sitting in a pc or server print queue)
Once the queues have been dotted, restart the printer and reconnect the network cable.
If this does not cure the problem, then the likely problem is a defective formatter Board.
Good luck!
-
Could someone suggest a multifunction print device priced with a good stand-alone Scan to e-mail feature? For practical reasons, it is quite difficult to test several models. In general, there is no excessive use, so no robust device is necessary.
I think the feature is General on most of the MFP-s, but I'm looking for a model that could also function as a standalone network device or use less resources PC without the need of additional human interaction (and not the option that comes to open the attachment in the computer hosts Outlook or another email client).
SMTP could be used as a post Office Protocol, Exchange probably also works. Any suggestions?
Thanks in advance!
Hello
If you are looking for an ink jet printer the HP Officejet Pro 8600 Plus (N911g) can meet your needs, it provides a direct scan to your e-mail via SMTP:
If you prefer a laser device you can check M276nw which provide similar functionality (as well using SMTP only):
The products above are all models of consumption... There are some business models that provide such functionality as well, but doesn't support SMTP as well (the M375nw as an example, costs about $ 600)... Exchange is only provided by business models the top end, but the price will be higher...
Shlomi
-
Color LaserJet M277dw MFP: Cartridge not recognized after HP recently updated.
I can use WIndows 10 if the fix is available for this OS.
I recently updated my HP LaserJet, and after the update, he refused to print, scan or copy. The error message on the display says: "Cartridge not recognized" and it has a large image of the yellow and black cartridge, cyan and magenta those smaller, but below. The printer has a wireless connection to internet.
Any help would be greatly appreciated.
Thank you
Hello
Install the following firmware for your printer, and then look for a difference:
Kind regards
Shlomi
-
Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%
Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.
I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.
I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.
I had care of do not connect USB until you are educated.
I tried repeating the installation without uninstalling first and get the same result.
I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.
I tried to do a right click to run the installer as administrator and get the same result.
I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.
The event viewer displays none error entry at all and no entry identifies HP as the source of an event.
I tried to connect via USB 2.0 and 3.0 ports.
I cleaned recycle them and temporary folders.
I have updated the firmware of the printer to the 20160331 version.
Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.
I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.
Thanks for any help solving this.
I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.
DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)
1. go into the Device Manager and find the printer in the list of devices
2. right click on the printer and select "Update Driver software"
3. click on "Browse my computer for driver software".
4. choose "Let Me pick one...» »
5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)
6. click next and back to the installation of hp box and must now see the printer and continue the installation.
-Alex
-
I get a pcl xl error message when we print our LaserJet Pro 400 Color MFP
When I scan or fax, we get:
PCL XL Error
Subsystem: TEXT
Error: InternalError 0 x 50
File name: cheettext.c
Line number: 710
The printer is a Pro 400 Color MFP LaserJet - m475dw
Windows 7 Professional Service pack 1
What should I do to fix this?
Thanks for the help. I actually did an update of the firmware and it solved the problem.
-
Jet laser HP m1005 mfp Scan to PDF
Dear Sirs,
Please let me know how to scan the document in PDF format in laser jet m1005 mfp hp
KoneHello
Please consult its manual (without option):
http://www.Toneri.magic-blue.NET/Opis/HP/PDF/HP-LaserJet-M1005-MFP.PDF
You can also use a program called pdf24, here is a screenshot:
Kind regards.
-
M127fn LaserJet MFP Pro: Hp Laserjet help
https://h30434.www3.HP.com/T5/LaserJet-printing/HP-LaserJet-Pro-MFP-M127fn-beep/m-p/5099750
-
HP MFP M276nw: y at - it a driver of the HP MFP M276nw sierra
Printer can be added through add printer process. Print shops. Not even a scan option! Any ideas? Thank you!
Hi @LJA53,
Thank you for joining the HP Forums!
I noticed your post that you can not scan with your printer HP Laserjet MFP M276nw on Mac OS X 10.12 Sierra. I am pleased to see that for you!
According to the website Software and Driver Downloads , I see not all the drivers for this printer for Mac OS X 10.12 Sierra. Have you tried using Apple Image Capture for scanning or the HP Easy Scan software?
If none of these work programmes, all we can do is wait for the software and drivers to be released, or plan to use Mac OS X 10.11 El Capitan until the software drivers come out.
If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
I hope that this post helps!
-
Driver for HP LaserJet M1005 MFP for Windows 7
Could not find driver for HP LaserJet M1005 MFP for Windows 7 please help soon
This product is supported by a plug-and-play printing and scanning to the driver which can be found here:
-
LaserJet pro 177: bought used hp color laserjet pro mfp m177
Installation disk arived broken. How can I do to replace it.
Just upload what you want the site web theHP.
-
I had used my LaserJet MFP Pro wireless without problem for several years, with the Mavericks and Yosemite. A few weeks ago a "update" the printer system is invisible. After several hours of troubleshooting and to try five or six corrections, I finally got the printer online by using the IP address.
My computers, however (a performer of the Mavericks and a Yosemite running), do not see the scanner. It's not a question of adding - they do not to add it. By HP support, I have reset the system print and tried to start over. I downloaded HP Easy Print (or Easy Start or whatever), which is the entire site of support in the way of software for the 277dw of the ACM. The software through me the entire upward and congratulated himself for a job well done, but my printer was not, in fact, related. He appeared in the printers Control Panel, but would not print. Just "connecting to printer" in the queue for ten minutes about until what I called off work. And the scanner does not yet show in the Image Capture, preview or HP Easy Scan.
So, I went back to my previous fix for the printer, use the IP address. Any ideas on how to get the scanner appears?
Hello
Restart your router by unplugging its power for 30 seconds.
Once it is fully up and you have internet access on your Mac reboot both the HP printer and the Mac.
From system preferences, select Printers and scanners and click on the plus sign to add the printer again.
Can you now ee he listed as Hello type or not?
Maybe you are looking for
-
How can I remove the photoalbums skydrive
How can I remove the photoalbums skydrive
-
For xp Home: is there a way around tax for RegCure Pro do its ' job?
I was sucked to download a "free" solution to the registry and various problems of congestion. Diagnostic capabilities were fast and versatile, then after hitting the button 'Fix all your problems at once', He would not go forward without a 40 dollar
-
Install the ActiveX control required to view the site
When I try to get updates from Windows Update site, ask me to install the ActiveX control required to view the site The instructions that I can install this active X do not work.
-
How to debug an application on BB10 with Studio Android android?
I installed the plugin android studio and began the proxy of the ADB and have connected the BB10. When you run or debug the application in android studio it comes up with the device selection screen. How actually debug you the application on the devi
-
After uninstalling also remove files?
Hi all. My application uses files to store parameters. I would like to delete these files once a user uninstalls the application. Is this possible? So I won't try to invoke the uninstall process (because then I know the answer.) Instead, I would like