M4-1115DX: HP Recovery Manager backup and Retrieval

Similar Questions

• Manager backup and recovery in Windows 8

  I tried to create recovery disks in the Backup and Recovery Manager.  The software would only make the first disk and then hang up.  All the other empty disks inserted appear as complete. I'm trying to burn DVD + R discs.  The backup application was updated to the latest version.

  Contacted Dell technical support.  Initially, the representative did not know what Backup and Recovery Manager is or did until I showed it to him on a remote connection.  He claims that it is a Microsoft problem, even if it is the Dell software.  Representative said that since Microsoft has no burning software disk in Windows 8, the Recovery Manager will be properly burn discs. (I could do the backup on a USB key).

  Microsoft contacted; they began to laugh because he comes to Dell software, but helped me to look at it any way.  After 2 hours of watching the software does not work, the rep told me to call Dell again.  He said that I need to download and reinstall the software.

  Of course, software release not correctly the player after that burned the first disc and shows then all the following discs as being full.  When the second disc is inserted, it is read as not having not any space and then is ejected.

  I could not complete the backup process by using a recorder external panasonic. So it seems there is nothing wrong with the software and may be a hardware problem.

• user managed backup and deferred tax rollback segments

  Hi Forum,

  Greetings of the day,

  Here I have a question about segments of rollback backup and deferred users managed, I don't have much experience with the user managed backups taken by backup of BEGIN and END.

  1. how facilities oracle using the database so that it is saved each tablespace, he will use deferred rollback segments?

  2. placing the tablespace in backup mode is the same as read-only mode, on a technical level. So that it can read the blocks and changes made by the user can be moved to deferred rollback segments and later applied to tablespace, when it is the backup of the END?

  3.AFAIK, will be created only to deferred rollback segments in the SYSTEM tablespace. So we need to keep an eye on the growth of the tablesace SYSTEM while the database/tablespace is backed by this method?

  4. when the tablespace is put out of backup by using the backup of the END , will be that it applied by the deferred rollback segments?

  5. where oracle will place deferred rollback segments, when tablesapce SYSTEM itself is implemented backup START ?

  6. DON'T face us any kind of failures during all backup /END START as full tablespace etc SYSTEM.

  Your answers will really helpful.

  Thank you

  Uday

  Here I have a question about segments of rollback backup and deferred users managed, I don't have much experience with the user managed backups taken by backup of BEGIN and END.

  1. how facilities oracle using the database so that it is saved each tablespace, he will use deferred rollback segments?

  In what context you mention the use of rollback differed with the backup segments maintained by users?

  2. placing the tablespace in backup mode is the same as read-only mode, on a technical level. So that it can read the blocks and changes made by the user can be moved to deferred rollback segments and later applied to tablespace, when it is the backup of the END?

  Do you mean to say that when the tablespace is backed up, it is not accessible to the DML? If so, this is a wrong concept. Oracle did not go for the rollback segment (which I do not know how you are linking anways), but maintains the writing the image in full blocks for the first time in the log files of recovery following the normal writing changed buffers.

  3.AFAIK, will be created only to deferred rollback segments in the SYSTEM tablespace. So we need to keep an eye on the growth of the tablesace SYSTEM while the database/tablespace is backed by this method?

  Response above asked about segment deferred cancellation and their relationship, according to you, with the backup tablespace?

  4. when the tablespace is put out of backup by using the backup of the END , will be that it applied by the deferred rollback segments?

  5. where oracle will place deferred rollback segments, when tablesapce SYSTEM itself is implemented backup START ?

  6. DON'T face us any kind of failures during all backup /END START as full tablespace etc SYSTEM.

  Seems that you don't really have an idea how the backups managed by users actually work. I'll suggest that you read about it first in the backup and restore documentation before entering in any event.

  HTH

  Aman...

• Help required with error 0 xC0000001 when opening DULL of the start menu and also impossible to create the recovery Dell backup and restore file.

  I use computer dell laptop inspiron 15 5558 with 8.1 windows preinstalled in it.

  I wanted to reinstall windows but I have no recovery media. Also I'm unable to create a new recovery media from Dell backup and restore. Also, I am unable to open feel of backup and restore in the start menu as this error comes up on screen

  Its always not available on him would happen, rumors were that he should have been made available yesterday, but Microsoft decided not to release it yet:

  http://winsupersite.com/Windows-10/Windows-10-build-10586-heads-slow-ring-insiders

• Smartphones from blackBerry Desktop Manager - backup and restore

  Hi all

  This function could help me save my contacts (phone numbers) from my device and restore them on another Blackberry I have?

  Thanks in advance.

  You are welcome. When you connect your other blackberry to the top and click on the wizard button - the info will download.

  If I helped you please click on Bravo in my post, and if that answered your question please check the resolved icon!

• Backup and HP Recovery Manager for Windows 7

  I installed all the software and drivers that came with the HP upgrade DVD. But, I found that the Backup and Recovery Manager missing on DVD. Is there a Backup and Recovery Manager for Win 7? I liked the manager backup and restore that was available on my Vista, when I bought this laptop, but is currently unavailable due to upgrade! All the solutions for this? I don't want to use the default Windows Backup that I don't have a separate HARD disk for the time to store the backup here and do not want to fill up my hard drive with data backup! Thank you.

  Ok thank you. I have my recovery partition intact Vista. So I think, I should be able to recover if I have some kind of problem! I was able to find a backup and recover in Win 7 itself. Maybe I should wait for the software will be released by HP. Thank you once again!

• Restore a full backup of disk created using HP Backup and Recovery Manager

  I have a PC (dc7800) was complaining about the hard drive is about to fail so before you do the replaced disk, I ran a full disc backup in the hope that it would make restoreing the PC to its previous 'glorious' State reasonably easy. He created 3 DVD full of files. Now that the PC has been returned, I can't get the manager backup and restore see backup and restore their! What the feck I'm doing wrong? Does anyone have instructions on how to get this thing to work?

  DVDs have a VHD file and a bunch of XML files. When I go to the recovery of the PC and select this option to restore to a point in time, I can navigate the OFN records DVD but no backup appears, I click Next and it just collapses the tree to the DVD player again! I'm doing my head here!

  it... due fixed so that it is an OEM of Vista version with no support, I couldn't 'fix' under Advanced Startup option. I was able to get an ISO image of a boot to boot with Vista Recovery on that drive. From here, I was able to run a repair and restore a backup PC.

• eMachines Recovery Management does not burn correctly

  I burn the eMachine Recovery Management backup files and it fails on the last disc (Disc #10... I am using CD).  VERY frustrating to take three hours to burn all discs and have the last of them fail.  Me still flashes an error code: 203.  I tried to use different drives in case I had a bad.  Is not serious.  I gave up and started to repeat the entire process and the same thing... 10 disk fails.  Loss of time, energy, and disks.  Any suggestions?  Thank you.

  http://www.eMachines.com/support/

  You try to use eMachines Recovery Management process.

  There is no part of the software of Microsoft Vista.

  EMachines contact support at the above link for their collection management process...

  See you soon. Mick Murphy - Microsoft partner

• Recovery Manager not available on the laptop starting :-(

  Hello

  I have laptop hp laptop g62-b05sl, and I created the new partition

  origin: C D (rtecovery) 15 GB and 300 GB

  now: C 50 GB system D (recovery) 15 GB and new F to 250 GB of data

  but now I have problem on the star pc, Press esc... and select F11 recovery... but the Recovery Manager starts and starting only seven windows.

  :-(

  probably in order to maintain the good recovery that he doesn't have to partition the hd?

  and now I need the sistem of recovery, I have no idea of similar manufacturing

  help please :-(:-(

  NAT

  Creation of new partitions usually breaks the F11 function. You burn your OS Recovery DVD game? If so start from to recover your original software.

  If you burn your recovery set, you can order from HP for a small fee.

• Recovery Manager does not restore image on HP Pavilion p6227uk [Windows 7]

  Hello

  Currently, I'm trying to reformat my HP Pavilion P6227uk, running Windows 7 Home Premium 64-bit.

  I reformatted this machine once before (a couple of years) using recovery disks created by the system. I saved these same recovery discs to reformat, I try now to complete.

  So far I performed the steps in the order as I did before - place the CD1 in the drive, boot from the CD, run a disk factory reset. First time I tried, she returned with the error message almost immediately, he does not reformat (or something to that effect) with this error code: 0xe0ef0002 and instructions for "contact HP support. AT 01:00. You must be kidding.

  I tried again and got exactly the same result. Decide to leave for another day, when the support would be around, I tried to boot normally (with the disc from the drive). This time, I got a black screen with white, printed on the top left text:

  BOOTMGR is missing

  CTRL-Alt-Del to restart

  Oh good God. I rebooted and tried to get to the system recovery. Nada, BOOTMGR is still missing. I put the recovery in drive and started to Recovery Manager disk and proceeds to try every single diagnostic at my disposal. Nothing's wrong, apparently, except for not being able to start Windows. Get a bit peeved (I have a disorder that leaves me open to huge bursts of anger, this did not help), I decided to try the Factory Reset. Oddly enough, it doesn't give me an error message, but seemed to be progress in the "Factory image restore. 4% and then 8% - and it's been stuck at 8% for the last 12 hours at least. I don't particularly want to turn it off for the risk of breaking something - even if Recovery Manager seems pretty broken as it is. There is a blue arrow pointing to 'Reformat the partition of your hard disk Windows' and that's all. No button is available (except the red X), nothing seems to happen anywhere. Extremely disappointed.

  Any help would be appreciated. I'll be phoning HP support tomorrow to get answers, although I don't have a particularly good story to keep my mood level when you speak with assistants and on pending emails is not my thing either - I saved important files on an internal HARD drive before you start (disconnected the motherboard HARD drive) and the hours of waiting and hours for email support is not an option.

  Thank you in advance, from the bottom of my heart. It couldn't have come at a worse time.

  -JR

  Hi, JR:

  While I can't help you with the problem of specific recovery disk (and is probably impossible anyway), I have a solution to your dilemma...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Reinstalling driver HP Recovery Manager does not

  We have recurring problems with his since 8.1 windows installation.  A way to turn that seems to be running the HP Recovery Manager tool and drivers running Applications and reinstall option.  However, we notice that it does not appear to do anything.  Whenever we run what he finds the same number of drivers and applications to reinstall with the same levels of numbers/release of version.  When we run it and install and restart everything seems fine, but the next tim we run the same drivers etc. are suggested to reinstall.

  Can anyone suggest what could be bad?

  Thanks in advance.

  Hey tasng4,

  Good to hear.

  Sometimes to communicate on a forum can be a real pain.

  Glad to see that we have understood each other and that things work as expected.

  If something happens to make me know.

• HP Recovery Manager is in Chinese language, problem I do not know Chinese.

  Hello everyone,

  My boss bought this Presario B1296TU in Hong Kong and the product number is FF421PA #AB5.  My boss want to format using the HP Recovery Manager because he knows the problem on his Windows Vista.  We do the F11 and we enter the HP Recovery Manager but the problem is that we do not understand the words appear on it because his Chinese on characters.

  Is there a way to make it in English?

  Is there a picture of the Recovery Manager User Guide so I can follow it even I do not understand the words?

  We remove the laptop HD, and allows us to save pregnant files for us. We see the recovery of the Presario HD Manager files. Is there a possibility that we can replace it with the English version? Where can I download the files?

  I hope someone can help me here...

  Hi all

  Sorry for the delay in posting here, I managed to solved the day I post the problem, here's how.

  I said on the forum I have remove my HD to my laptop and use speaker and connect it to another computer.  When you make that their will be 2 partition appears on the computer, the Recovery Manager partition and the Partition for the Windows System.

  All the files inside the partition Recovery Manager are in hidden files, you need to configure the Folder Options - Show hidden files (this can be done on Windows XP and below, I don't know if there is the same option as Windows XP, Windows Vista)

  After the display of hidden files, you need to look for a file with extension ".log" (I think "master.log", I'm sorry I forgot the exact name of the file). This file has an icon like Notepad, open it, and you will see that this file is a load of the Recovery Manager configuration.

  Search for language line (its on the top line of the option), replace the words after the equals sign '=' with English. Then that's it, replace the HD from your laptop and then do the F11... tadaaa... her English... ^_^.

  I am happy that I have discovered this by my own... because of the curiosity I could solve the problem.

  Please post other solutions to this problem, or more user-friendly guide for this solution. Thank you.

  Message edited by Bendcat on 03/22/2009 18:44

• VMware vCenter Site Recovery Manager Server services stop auto

  SERVER VMWARE VCENTER SITE RECOVERY MANAGER, service stops automatically.

  Section of VMware vCenter Site Recovery Manager, pid = 2084, version = 4.0.0 build = build-192921, option = released
  [2010-12-19 08:39:33.595 06868 WARNING "App"] Cannot create the writer console
  [2010-12-19 08:39:33.611 04220 info "App"] Set of dump dir "C:\Documents and Settings\All Users\Application Data\VMware\VMware vCenter Site Recovery Manager\DumpFiles"
  [2010-12-19 08:39:33.611 04220 info "App"] The initialization of the DBManager
  [2010-12-19 08:39:33.736 04220 info "App"] Current working directory: C:\Program VMware vCenter Site Recovery Manager\bin
  [2010-12-19 08:39:33.736 04220 verbose "ThreadPool"] TaskMax = 10, IoMin = 1, IoMax = 21
  [2010-12-19 08:39:33.736 04220 verbose "ThreadPool"] Definition of MTA COM threading model
  [2010-12-19 08:39:33.736 04220 info "App"] Try DrExternalRecoveryApi
  [2010-12-19 08:39:33.736 04220 verbose "App"] Plugin path 0: dr-external-recovery - api dll
  [2010-12-19 08:39:33.736 04220 verbose "App"] Absolute path of the plugin 0: C:\Program VMware vCenter Site Recovery Manager\bin\dr-external-recovery-api.dll
  [2010-12-19 08:39:33.736 04220 info "App"] Try RecoverySecondary
  [2010-12-19 08:39:33.736 04220 verbose "App"] Plugin path 1: dr-secondary - recovery.dll
  [2010-12-19 08:39:33.736 04220 verbose "App"] Absolute path of the plugin 1: C:\Program VMware vCenter Site Recovery Manager\bin\dr-secondary-recovery.dll
  [2010-12-19 08:39:33.736 04220 info "App"] Try SanProvider
  [2010-12-19 08:39:33.736 04220 verbose "App"] Plugin path 2: dr - san - provider.dll
  [2010-12-19 08:39:33.736 04220 verbose "App"] Absolute path of the plugin 2: C:\Program VMware vCenter Site Recovery Manager\bin\dr-san-provider.dll
  [2010-12-19 08:39:33.767 04220 'Local' info] Created from the ./locale/ locale subsystem with in default locale.
  [2010-12-19 08:39:33.783 04220 info "SrmServiceInstance"] DrExtApi Instance of Service is initialized.

  Post edited by: a.p. (VMware Community Manager)

  Moved to the 'Site Recovery Manager' forum and edited the object line to fix the formatting

  While I can't give you a solution, I can share that I had a similar problem with an SRM installation.  Like yours, mine was a working facility which, for some strange reason, began to exhibit the same symptoms.  Start the service, in a second or two, stopped service.

  I opened a ticket with VMware on the issue and in more than three months of back and fourth Exchange with various Tech support I have ever received a satisfactory answer on what caused it.  The 'solution' they gave me was to remove the database SQL RS and re - install SRM.  This 'solution' has worked, but if this question comes up, I'll probably have to back unpleasant, emphasizing the fact that they solve the problem.

  I wish I could be more help, but that's it.  I feel your pain.

• Backup and HP Recovery Manager General Questions

  I made a series of restore DVD using backup and HP Recovery Manager hear are several questions I have.

  If the restore on my hard drive partition is deleted can always restore from the DVD I made?

  I am upgrading to Windows 7 will soon be the Recovery Manager always be available for use?

  Thanks, Rich614

  richie614 wrote:
  

  I made a series of restore DVD using backup and HP Recovery Manager hear are several questions I have.

  If the restore on my hard drive partition is deleted can always restore from the DVD I made?

  I am upgrading to Windows 7 will soon be the Recovery Manager always be available for use?

  Thanks, Rich614

  Rich, Yes, the DVD can take the place of the partition.  However, I would test to ensure that they work properly before you delete the partition of the DVD.

  Yes, however, it will restore your computer to its original state.  This means that you will no longer Win 7, but programs and original OS.

• Where can I get a copy of the backup and for windows xp hp Recovery Manager

  Compaq Presario SR2010NX

  Windows XP

  I had to reinstall Windows on another drive of Windows for the C: drive so that I can make a recovery of the D: partition. However, now I have more have "HP Backup and Recovery Manager" to run Windows and cannot make a recovery with F10 at startup.

  What I need to solve the problem in my view is another copy of the "HP Backup and Recover Manager". Where can I download this from where to buy it? I found a copy for Windows 7 and copies for laptops, but nothing that I need. Any help is greatly appreciated.

  Hello:

  As you discovered, is not available for download or purchase, etc.

  Why you can get it online for laptops, for hints. I looked too.

  I guess you have tried one of the downloads for laptop to XP, and it did not work?

  I know I should.

  The only way, in my view, that it is possible for you to get the program, is to buy a set of recovery discs and use them to reinstall XP. They should reinstall XP and all programs from your PC and recreate your recovery partition.

  You can see if HP has them by reading the info on the link below (I doubt they make, but you may as well ask).

  http://support.HP.com/us-en/document/bph07143

  If HP does not, you can still get this provider on the link below.

  http://www.computersurgeons.com/SearchProducts.aspx?SBT=SR2010NX&BKM=results#results

  Paul