ZBook 15 2.4: disc not recognized by HP ZBook15 2.4 K1100 24RAM Thunderbolt

Similar Questions

• DVD / disc not recognized Equium A100

  I recently bought a laptop with Vista installed Equium. On my old pc (Windows XP Home edition), I supported a large number of pictures and files on a DVD disc with nero, when I try to load these on my laptop the drive is not recognized.

  I have a lot of files on the other DVD, these are also not recognized, I would like to transfer these files on my laptop. Can anyone help this?

  Thanks in advance

  Hello

  As you have probably not known, not all CD or DVD is compatible with each drive.
  This means that sometimes the medium cannot be recognized and the Player cannot read or write on CD or DVD.

  In my knowledge in the manual, you should find a list of compatible DVD and CD.

  PS: I use the TDK CD and DVD TDK. I m very satisfied

• Most optical discs not recognized Vista

  Over 3 years, Vista SP2 PC most CD is not recognized.  The drive is: eject the tray opens.  Only a single disc (audio) is recognized.  Have swapped the PATA ribbon cable and swapped the drive itself.  CHKDSK and SFC show no problem.  I deleted the UpperFilters.  All to nothing does not.  I have not started on a live CD again.  There that something remains to be done before an inplace install Vista?

  Hi Gardner. E,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  You can try to uninstall and reinstall the driver completely system CD\DVD and check.

  Step 1: Uninstall the drivers from Device Manager.

  a. Click Start and type devmgmt.msc and press ENTER.

  b. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  c. right-click on the sound card and choose uninstall.

  d. restart the computer and check.

  You can also read the following article and check:

  http://support.Microsoft.com/kb/982116

  Hope the helps of information.

• Disc not recognized when you try to install a program

  OP: try to install the program

  try to install the program "Family TreeMaker" and cd/dvd-rom does not recognize the disc. I tried to type in setup.exe at the beginning and still can not get the computer to recognize that there is a program disk in drive E:. It just keeps wanting to "burn" on a CD. What can I do? I tried to go to the Control Panel, tried to restart the computer with the disk in the drive. I have Vista home edition,

  Hello dragonfly1814,

  If the drive is not recognized, try and check if the drive works on another computer. If the computer still does not recognize the drive, the best idea would be to contact the manufacturer or seller to obtain a replacement CD-ROM.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• CD/DVD discs not recognized

  Trying an answer, I found that I deleted my lower and upper filters. How can I get back them?

  Hello

  You don't want these filters.

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Pioneer BLU - RAY and DVD discs not recognized by Windows 7

  The discs were fine until I installed Windows 7 Home Premium 64-bit. Before my hard drive crashed, I was using Windows 7 Pro 64 bit. The computer was built by a local store, so I don't know if they have done something special to get discs running, but readers are reported as compatible with Win 7.

  Readers are:

  PIONEER BDR - 205 Blu - ray

  DVD PIONEER DVR - 218L

  My motherboard is ASUS P6TD Deluxe, BIOS 0106

  I am very handicapped and rely heavily on my computer to work. I can't load my well-being critical software until I get these discs work, then I'll be very grateful for any help.

  Thank you

  Jeff

  Hello

  I suggest to follow the steps provided and check if it helps.

  Method 1: Run the troubleshooter of material and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Your CD or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/982116

  Alternatively, you can install the drivers from here:

  BDR-205 Blu - ray Pioneer driver:

  http://www.PioneerElectronics.com/Pusa/Professional/computer-drives/BDR-205

  Method 3: Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  See also: automatically get recommended drivers and updates for your hardware.

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• CS4 disc not recognized

  I am trying to install CS4 on my Windows XP computer, but when I put the CD in the drive the floppy disk is not recognized. In fact the disk does not appear to 'see' one of the disks that came in the package. The reader has no problem with the audio CD or CDs containing other programs. I also tried the disc in the DVD drive of the computer, but no luck.

  To complicate the foreign disks CS4 seem to work on computer (most recent) well my wife.

  Can someone tell me what is happening?

  For starters, the disks are DVD not CD!

  Second, your old computer may miss a few update needed to play the media.

  Can you make a copy of the package on your hard drive and install from there?

• HP Pavilion DV6 DVD disc not recognized and the media player does not work

  My HP DV6 is having... issues.  Windows 7.  A little history:

  Recently (2 months ago) he quit the installation of the updates of Windows and would download 3 whenever I stop.  HP support could not help or Fix - It programs work.  Had to restore it to factory default and that solved THIS problem.

  Reading card camera (which I have done before) attempted recently, but he did not read / was not recognized.  Today, tried to launch a DVD, and when it does not start automatically, I discovered that it is not recognized.

  Tried HP Support Assistant, who told me that the model # of the DVD drive that I was using, then proceeded to say there was something wrong with the driver... and he couldn't fix it.

  More?  (Windows Explorer, not Internet) will be often expire or crash...

  I have Norton Internet Security with live update and have yet to have virus problems.

  Any help or questions greatly appreciated!

  To resolve this problem, remove the affected filter drivers. To do this, follow these steps:

  1. Click Start, type regedit in the Search box, and then click regedit in the programs list.
     
     If you are prompted for an administrator password or a confirmation, type your password, or click continue.
  2. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

• HP Personal disc not recognized

  My old HP Pavillion included one bundle etc on disc of withdrawal that I had backed up my files and photos. When he died and I replaced the office with another HP I tried to connect via a USB port to put these on the new PC (and my Toshiba laptop). Nor will it recognize.

  Any help or advice would be most appreciated.

  Just a quick note to say that I had the technical support hp take possession of pc to try to solve. No luck.

  A trip to the world PC kind confirmed the player had failed, but that they wanted £80 it to check to see if recovery would work and then needed a £60 new drive if he could be transferred for a fee of £120 to perform a recovery to the warehouse of tech. Not worth it then abandoned. In any case thanks for trying to help.

  Concerning

  Terry

• Seagate Barracuda disc not recognized by Win7 installation disc

  Hello!  I'm trying to get and set the password on Aspire M34706 brother, who uses a Seagate Barracuda ST3500413AS hard drive.  (Yes, I know, it should have a password recovery disk, but does not.)  This player is driven by the firmware of the bus and doesn't seem to have a driver software available.

  The problem I have is, I can't seem to find the driver file or equivalent for this disc, or a software driver I could load from a removable media.  So I can't answer or edit user, not through msconfig.exe, do not use a recovery program, nada.  I get in what concerns the 'load drivers", so I'm stuck.  I can view the contents of the hard drive, but I don't know the path or the name of the driver that I need to load.

  Anyone have any idea of the file name and path (in a standard-issue of Win 7 Acer OEM installation)?  Or any other idea how to access the necessary file?

  Hi, guys and girls!  I managed to solve my problem without having to do a restore.

  After much searching the Acer site, I found packets of driver, zipped, current drivers for all their models of computers over the last 3 years.  I downloaded, unpacked to a flash drive, booted from the installation disc of Win7 drivers flash player, and after all that, with a minor hack, has been able to activate the hidden administrator account and use it to reset the password for my brother.  This last part lasted only 10 minutes.

  The problem of not being able to write to the hard disk was because my brother does not run the firmware upgrade for the main bus, which I have now taken care of.  So now I'm a happy camper, he is a happy camper and all right.

  That's all, just letting you know in the case of someone of another encounter a similar hard drive problem: full driver packages are available from Acer tech support site, just search on your specific model number.

• Diablo 3 disc not recognized.

  XPS 8700, player can see CD & DVD, just don't 'see' this game installation DVD, the disc is good, will work on my laptop, ideas?

  Could be a disc damaged - you can download the game on battle.net client (just create an account and use the code provided with the drive).

  Even if you have a D3 DVD, you need download, because there was a major release of D3 for about two weeks.

• I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Original title: no dvd

  I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Hi Lesliestones,

  ·         Did you do any change on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest refer you to the article in the Microsoft Knowledge Base and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Method 2: You can run the fixit and check if it works.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  I hope this helps.

• CD/dvd opens and closes and towers cd/DVD but unable to read the disc and is not recognized by pc

  No icon in my computer and the drivers does not work

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Hello, I recently bought a new iMac and I am wanting to install Lightroom for her, but I'm having some trouble with the key to series is not recognized. There is no disk drive on the new Mac, so I can't just pop the disc in. Is there anyway I

  Hello, I recently bought a new iMac and I am wanting to install Lightroom for her, but I'm having some trouble with the key to series is not recognized. There is no disk drive on the new iMac, so I can't blow my disc. Is there a way I can download it simply by using the key to series on my package? I tried the section "Redeem Code", but said air key is not valid. Thank you

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• A SSD from OCZ Agility 3 disc works with a dv9700T? Mine is not recognized by the BIOS.

  I bought a 120 GB OCZ SSD Agility 3 disc to install in my laptop the dv9700T CTO.  The drive is not recognized by the BIOS when it is installed in the Bay of 1 or 2, but is recognized when connected via USB as a secondary drive.  The drive works fine in a different computer, so I know the drive works.  There seems to be a problem with the SATA (ICH8) controller.

  Someone at - it any information on that?  Would love to get the drive works in my laptop.

  Thank you.

  Lloyd

  If you have a HARD drive installed in the secondary Bay and the OCZ SSD in the first Bay, the dv9700t starts and works very well.

  Lloyd