M40-276 ati and lan NO suport on toshiba driver download
Hello.
Can help me someone to find the DRIVERS for the graphics ati x200M series and realtek lan card drivers.
I try to find on this page
http://de.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=de
but there is not that OK drivers... There are marvel chip and none for realtek LAN drivers and it is ATI drivers but no support ati x200M series...
www.ati.com also have no support for this card... WTF is with the support of toshiba? Thank you
Hello
As far as I know the Satellite M40 is available with 4 different hardware components.
In this case the drivers for the new model are not available at this time. But I'm 100% sure that you will find these drivers on the website in the coming days.
Good bye
Tags: Toshiba
Similar Questions
-
Satellite M40-276 - memory not detected in the Bios upgrade
Hi people!
New kid on the block!
I have a client with a toshiba Satellite m40-276. I've updated his memory to give it a little more to play with...
Went into the bios to see if everything was OK but no projected additional memory. I removed the new and old memory and put in the new 1 GB module and restart the computer.
The bios has not yet changed the size of the old memory?Went to windows and of course that the memory has been detected it normally?
I added the other memory module and went into the bios again, but no change it?Windows, however, recognized that the two modules?
His computer is the same bios to factory and has never been updated.
My questions are... why the bios doesn't recognize the upgrade memory? It will help in upgrading the bios?
Enjoy all the suggestions I can get on this issue.
Thank you
bookie56
Generally, if you upgrade RAM using tested compatible modules, that should be recognized correctly.
We do not know what modules you use, and I guess that there is a compatibility issue.RAM on Satellite M40 276 can scale up to 2 GB of RAM and compatible modules are:
DDR2 400/533 256 MB (PA3389U - 1 M 25)
512 MB DDR2-400/533 (PA3412U - 1 M 51)
1 GB OF DDR2 400/533 (PA3411U-1M1G) -
Can what are the chances I use on my Satalite M40 - 276?
Hello.
I have the Satellite M40-276.
After 5-6 years mast * one cant readd UJ-841 workout DVD any DVD more, can not burn... Ok
I buy a new DVD from a friend, but Toshiba does not acknowledge a new reader, try several LG, samsung, toshiba player!
Are you that a list od manufacturing drivers which can be replaced by uj-841Please consult the of manuals of s of the user for your laptop, and here you can find.
If you still need help let me know. I get it you. -
Windows on Satellite M40-276 - no visible HARD drive installation
Hello
Since the end of the week, I had time to start my Toshiba Satellite M40-276 (PSM44E)...
I installed Windows XP Pro, I don't remember installing any kind of SATA/PATA drivers, but unfortunately Windows Setup does not recognize the hard drive installed, which was never changed.
Now, I have discovered that the hard disk sometimes does not appear in the BIOS?
Is there any type of driver that I can download and include in a Windows installation CD?When I start the laptop with Knoppix 5.1.1 I can copy and access to all files on NTFS formatted disks, the hard drive itself should be well (im checking with HDD Regenerator v1.51 on a Boot CD for the moment).
And I have another question - y at - it an update of the BIOS for the Satellite M40-276 (PSM44E) which can be flashed on a boot CD? On the official homepage I can only find the update of the BIOS Windows :(
Thanks for your patience...
Best regards
Robert of Austria
Hello
Have you tried to reinstall the OS from the Toshiba restore CD? Or did you use the clean Windows XP CD?
AFAIK the M40 supports a SATA HDD and the laptop was equipped with a SATA HDD controller.
Windows XP with SP2 should recognize the HARD disk properly.
If your XP doesn t contains SP2 and include it using the program nLite> And I have another question - y at - it an update of the BIOS for the Satellite M40-276 (PSM44E) which can be flashed on a boot CD? On the official homepage, I can only find the Windows BIOS update
No, only the win-version of the BIOS is available on the Toshiba page!
-
NB510-108 problem with wireless and lan controller
Help, please!
(answer in German would be nice, ill try English first tho)I installed ubuntu 12.04 on my toshiba NB510-108 (PLL72E-00R011GR) and then I was not able to go online via wlan or lan same kable.
After some effort to install the drivers through ubuntu I have installed windows 7 starter edition back but now windows does not install the ethernet / wireless drivers realtek or atheros network device.
so I tried to install all the drivers wireless by http://toshiba-asia.com/sg/support/drivers/ but now when I try to run these drivers after loading them down windows 7 cannot install correctly, it says that there is a compatibility issue. I tried to run these drivers in compatibility mode for win xp sp1 and win vista sp1 without success.Also, I installed all the drivers for my model of http://de.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=DE here with some of them have been properly installed and even when I get my system to a point where I find the two network devices work as 'good' in my windows Device Manager, the following problem occurs again:
I can't find any of my netbook WiFi network (wlan is enabled via fn + f8) no matter what type of router I try to connect. other laptops have about no problem connecting to routers so that can't be the issue. When I click on the windows just below the wlan troubleshooting info it only says no problem could be identified (the system is in German, so please excuse my translation)
In the information system components and devices of problem the pnp for the ethernetcontroller said pci\ven_1969 & DEV_1090 & SUBSYS... and for the networkcontroller: PCI\VEN_10EC & DEV_8176 & SUBSYS...
If it is useful. I also wanted to put my dxdiag online file, but this extends the limit to 3000 characters.Someone here could help me please? It would be really nice
Hello
I m wondering why you have the same problems of connection using WLan and LAN.
I mean its not really necessary to configure anything to get a connection to the local network works.
The router must support, and DHCP must be enabled in order to assign the IP address automatically.I recommend that you check the TCP/IP settings in your network WLan and LAN connections.
In TCP/IPv4, you can view the properties. The INVESTIGATION period and all other options should be set to assign automatically. You should also disable/uninstall the TCP/IPv6 and must use TCP/IPv4By the way: you have an antivirus and firewall software installed? If so, remember that the two don't affect the WLan/LAN connection.
-
Express Port Replicator II and Tecra A10 - 12Z - only the power and LAN
Since my Toshiba T3600CT I received with docking station, I discovered that I have a docking station. In the meantime, I had a small Sony who had no docking station, for which I got one of the first USB docking station and since then I've seen always to get laptops with docking station.
But this time something went really wrong, the Toshiba Express Port Replicator II PA3680E-2PRP provides only power and LAN. There is no power in the USB ports, so no serial port or the sound, and DVI and VGA are also disabled.
All these ports work fine on the Tecra A10, but not on the docking station.
Of course, it is nice to have the power and LAN, but not when I expected too much of everything.
So I was wondering if anyone has had a similar problem, it is like upgrading the BIOS for me who have not installed all the necessary software, or is it a fuse or something I could fix myself or is it a faulty docking that shouldn't have left the factory?Hello
What's your Tecra pre-installed with original recovery image?
When the laptop is preinstalled with recovery image simply connect compatible laptop Toshiba docking station and all the devices connected to the docking station will be recognized correctly and all available ports should work fine.
Is that a Port Replicator basically "replica" ports on the laptop.On this virtual path, we cannot say that this port is 100% OK. What can you say about it? you bought is used a?
-
WLAN and LAN on Satellite U500 connectivity issues
I have a Satellite U500 laptop, the problem is that I have never connected to the internet, even if the modem works well in other devices such as mobile.
I'm trying to connect to the internet automatically and manually. It s always saying limited connectivity or local only.
I ve checked the driver for my wireless and LAN cards and everything works correctly. Then I plugged as the hub of LAN or Ethernet cable, sound correctly connect the laptop to the modem, but I checked the free config or a physician any link is in x.I followed the steps but it s not solved my problem.
I hope someone can give me an advice.Somehow it seems to me that you have a problem with your router.
Restart your router, and then try again.
I can understand if there is a problem with the WIFI but LAN should work without any problem.
When you connect the network cable to your laptop is green LED ON?
Does not yellow LED flashes?BTW: do you use the operating system preinstalled (factory State) of origin?
-
Satellite L650/1MC - WiFi and LAN connection keep dropping out
In the last two weeks, that my wifi connection dropped regularly - only a reboot solves the problem. Because it became so frequent (and boring) I returned with an ethernet cable, which worked OK for a few days, but tthat hen started making the same thing: no internet connection.
I must emphasize that my other active wifi (android and android phone Tablet) kit continue to connect to internet via wifi etc, even when the connection of the laptop has fallen. This leads me to suspect that the problem is mobile partner no router etc. relates. The laptop is rarely used on battery, so I do not have the power as a problem management.
I have a Satellite L650/1MC running W7 64-bit. I made no changes to my system recently which may give rise to this problem - everything works perfectly until a few weeks before.
I checked for updated firmware updated on my router in the case where it is the question - it's not.
Any suggestions to fix this annoying would be welcome!
> I checked for updated firmware updated on my router in the case where it is the question - it's not.
Have you tried to reboot the router?
Since the two connections (LAN and WLan) stops falling, I think that the router is the problem.
OK, two other android devices seems to work properly but the fact is that router shares automatically and possibly IP addresses, the IP address cannot be assigned correctly.However, you can check the WLan and LAN TCP/IP protocol settings.
Uninstall the TCP/IP v6 and use only the v4 TCP/IP for LAN and WLan.Also ensure that your security programs (firewall & anti-virus software) don't affect the internet connection.
-
When I connect the USB and LAN cable does not my trackpad
Hey guys how are you.
When I connect the USB and LAN cable does not my trackpad
How can I fix this error. Please teach me.
Which macbook model do you have?
a USB mouse still works?
your keyboard still works?
No matter which USB port you use?
No matter what USB device allows you to create this error?
-
Hi, I need ati radeon 6470 m and 3000 dual graphics intel graphics driver for windows 10 pro 64-bit edition. Windows 7 and windows compatible driver 8.1 does not work on windows 10, it installs successfully without any problem, but swtiching to high performance cause crashing of a game or multimedia player. I also tried the update of the driver through windows update, but it detects ati radeon 6470 m as series 7400 m ati and don't work at all, although please help me what to do.
Sorry to be the bearer of bad news, but the problem, that you are facing is that Microsoft provides only pilots with the most basic features and what you really need for these features in laptops is the specialized drivers written for the specific material found in laptops - and unfortunately, there is no HP Win10 laptop driver. HP only guarantees the compatibility of Win10 for machines manufactured after August 2013. HP is not no matter what timetable indicating when, or IF, they will produce drivers for older machines.
This means that your PC is probably NEVER going to be fully functional under Win10 because the pilots is needs for all features simply do not exist!
To restore all the features, you will need to do a reset to factory using HP recovery media to its original operating system pre-installed.
-
Conflict HSPA and Lan Wireless
Hi, I have a dongle USB HSPA Sierra for internet access and home Asus Wifi network for file sharing. When you try to connect to the internet with HSPA and Lan active, IE displays an error message from Asus. Internet is only available with the Asus Lan disabled. I would like to be able to maintain two connections at the same time. Is this possible? Thank you very much.
Hello
I'm afraid to say that this is not possible. You cannot hold two connections at the same time.
Hope this information is useful.
-
Internet does not work on Windows 7, no drivers for the Wifi and LAN
Original title: Windows 7
I used to have Windows 8 on my laptop. Well, so I've updated for Windows 10. Config my laptop wasn't as good, so it's slow. Recently, I installed Windows 7 (as it is known for the performance) somehow, the internet does not work. Missing the drivers for the wifi and lan. What should I do?
Well, as my readers usb and touch screen no longer work.
You have installed Windows 7 on a machine that is preinstalled with Windows 8, without checking first if the computer manufacturer supported and provided Windows 7 drivers for it.
If does not support or provide Windows 7 drivers for this, you should never have installed Windows 7 on this computer Windows 8 and we cannot help you.
Reinstall Windows 8.
-
WiFi and Lan Nic went down yellow sign and DPS all of a sudden
Hello
I have the 2003 domain controller. All of a sudden all the client computers (Win7 & 8) interface card NETWORK WI - FI and Lan had signs of yellow color and the diagnostic policy service is stopped.
Could not restart DP service and internet connection down.
After that, all attachments from MS outlook cannot open with the protection mode and it said corrupted when we open with protection mode.Please help me solve this problem.
Thank youHi Seyed,
Thanks for posting the query on Microsoft Community.
This problem may be the best answer by TechNet forums. Post the request on the TechNet forums.
In the future, if you have problems with Windows, get back to us. We will be happy to help you.
-
After Anyconnect I can't access to asa and LAN
Dear all,
My office use ASA 5505 and I use anyconnect from outside (sometimes overseas), I can connect to my network and business by ASA, internet access, but I can't access ASA and LAN (network of my client). WHY?
Office 192.168.10.0/24
192.168.11.0/24 VPN
How can I solve this problem?
ASA Version 9.2 (3)
!
ciscoasa hostname
activate the encrypted password of XXXXXXXXXX
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
passwd encrypted XXXXXXXXXX
names of
192.168.11.1 mask - 192.168.11.10 local pool Pool VPN IP 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP address 192.168.10.254 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
address IP AAA. BBB. CCC DDD EEE. FFF. GGG. HHH
!
boot system Disk0: / asa923 - k8.bin
passive FTP mode
clock timezone 8 HKST
DNS domain-lookup outside
DNS server-group DefaultDNS
Name-Server 8.8.8.8
Server name 8.8.4.4
permit same-security-traffic intra-interface
network of the VPN_Pool object
subnet 192.168.11.0 255.255.255.240
network of the NETWORK_OBJ_192.168.10.0_24 object
192.168.10.0 subnet 255.255.255.0
inside_access_in of access allowed any ip an extended list
outside_access_in list extended access permit icmp any one
DefaultRAGroup_splitTunnelAcl_1 list standard access allowed 192.168.10.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm-731 - 101.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
interface NAT (outside, outside) dynamic source VPN_Pool
NAT (inside, outside) static source any any static destination VPN_Pool VPN_Pool non-proxy-arp-search to itinerary
!
!
NAT source auto after (indoor, outdoor) dynamic one interface
inside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 AAA. BBB. CCC DDD. 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
Activate Server http XXXXX
http 192.168.10.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-192-SHA ESP-AES-256-SHA SHA-ESP-3DES ESP-DES-SHA ESP-AES-128-SHA-TRANS ESP-AES-192-SHA-TRANS ESP-AES-256-SHA-ESP ESP-3DES-SHA-TRANS TRANS-DES-SHA-TRANS
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
Terminal registration
name of the object CN = ciscoasa
Configure CRL
Crypto ca trustpoint Anyconnect_Self_Signed_Cert
registration auto
name of the object CN = ciscoasa
Configure CRL
Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
registration auto
name of the object CN = 115.160.145.114, CN = ciscoasa
Configure CRL
trustpool crypto ca policy
string encryption ca Anyconnect_Self_Signed_Cert certificates
certificate 5c7d4156
308202d 4 308201bc a0030201 0202045c 415630 0d06092a 864886f7 0d 010105 7 d
0500302c 3111300f 06035504 03130863 6973636f 61736131 17301506 092a 8648
09021608 63697363 6f617361 31353131 31303131 31363231 301e170d 86f70d01
5a170d32 35313130 37313131 3632315a 302 c 3111 55040313 08636973 300f0603
636f6173 61311730 1506092a 864886f7 0d 010902 16086369 73636f61 73613082
0122300d 06092 has 86 01010105 00038201 0f003082 010a 0282 010100cc 4886f70d
af43a895 8c2c3f49 ad16c4b9 a855b47b 773f4245 1954c 728 7 c 568245 6ddc02ab
78 c 45473 eb4073f6 401d1dca 050dc53f cfb93f58 68087f6d 03334fc 1 53f41daa
454ff4bb 691235ab 34e21d98 4cfecef4 204e9c95 76b1b417 b5cf746c 830788b 4
60063e89 0ffe5381 42694cf8 d1be20d4 4c95d9c6 93041af2 94783de0 fe93cf67
4ad8954f 5392790b 4ded225c c3128cba 8d3ee07b f9fd2208 34b1956c be0a774a
d054a290 14316cc0 1670bdea f04c828b 7f9483fb 409fa707 fbe5a257 33597fed
ca790881 b1d4d3dc b0e1095e bf04014e 19c5cfeb f74aac57 ee39cd6e 7389cdd1
8b9421fa ee2b99ae df07fba1 0b506cd8 ea9f64c5 dd9169ad 157fcdb7 f6cfff02
03010001 300 d 0609 2a 864886 05050003 82010100 c8719770 1305bd9c f70d0101
2608f039 0dc6b058 0dfe3d88 76793 has 18 8f601dda b 8553, 893 d95e3b25 30ef7354
772f7d0b 772869d 7 372f8f5c f32992af fa2c8b6e 0f0ae4ce 4e068b8d b7916af2
affa1953 5bfd01a6 1a3c147d 75d95d8c 1122fa85 3905f27b 2474aff4 11fff24f
c305b648 b4c9d8d4 9dcf444b 9326cda3 0c4635d0 90ff8dd8 9444726c 82e002ec
be120937 0414c20a 39df72fb 76cd9c38 cde9afda 019e9230 66e5dba8 ed208eae
5faabb85 ff04f8f2 c36b724b 62ec52cc f967ee1d 1a6458fc 507a 2377 45 c 20635
2c14c431 baac678a dcc20329 4db7aa51 02c 36904 75b5f307 f1cc056d 726bc436
597a 3814 4ccd421d cb77d8f5 46a8ae69 2d617ac8 2160d7af
quit smoking
string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
certificate 5d7d4156
308201f0 30820308 a0030201 0202045d 415630 0d06092a 864886f7 0d 010105 7 d
05003046 06035504 03130863 61736131 18301606 03550403 6973636f 3111300f
130f3131 352e3136 302e3134 352e3131 1506092a 34311730 864886f7 0d 010902
73636f61 16086369 7361301e 170d 0d 323531 3135 31313130 31323136 35395a 17
3111300f 06035504 03130863 6973636f 61736131 a 31303731 32313635 395, 3046
18301606 03550403 130f3131 352e3136 302e3134 352e3131 1506092's 34311730
864886f7 0d 010902 16086369 73636f61 73613082 0122300d 06092 has 86 4886f70d
01010105 00038201 0f003082 010 has 0282 010100cc af43a895 8c2c3f49 ad16c4b9
a855b47b 773f4245 1954c 728 7 c 78 45473 eb4073f6 401d1dca 568245 6ddc02ab
050dc53f cfb93f58 68087f6d 03334fc 1 53f41daa 454ff4bb 691235ab 34e21d98
b 830788 4 4cfecef4 204e9c95 76b1b417 b5cf746c 60063e89 0ffe5381 42694cf8
d1be20d4 4c95d9c6 93041af2 94783de0 fe93cf67 4ad8954f 5392790b 4ded225c
c3128cba 8d3ee07b f9fd2208 34b1956c be0a774a d054a290 14316cc0 1670bdea
f04c828b 7f9483fb 409fa707 fbe5a257 33597fed ca790881 b1d4d3dc b0e1095e
bf04014e 19c5cfeb f74aac57 ee39cd6e 7389cdd1 8b9421fa ee2b99ae df07fba1
0b506cd8 ea9f64c5 dd9169ad 157fcdb7 f6cfff02 03010001 300 d 0609 2a 864886
05050003 82010100 00089cd 3 d0f65c5e 91f7ee15 bbd98446 35639ef9 f70d0101
45b 64956 f146234c 472b52e6 f2647ced a109cb6b 52bf5f5d 92471cb7 a3a30b63
052ac212 c6027535 16e42908 ea37c39a 4d203be9 8c4ed8cd 40935057 3fe8a537
a837c75c feff4dcc 1b2fd276 257f0b46 8fcd2a5c cbdcacec cd14ee46 be136ae7
7cd4ae0d aace54fe 5187ea57 40d2af87 cded3085 27d6f5d8 1c15ef98 f95cc90e
a 485049 4 805efa8f 63406609 a663db53 06b94e53 07c1c808 61eadcdb 2c952bee
74a0b3dd ae262d84 40b85ec5 a89179b2 7e41648e 93f0e419 3c482b29 e482d344
d756d450 8f0d9302 d023ac43 a31469a4 105c8a0c b1418907 693c558c 08f499ef
364bc8ba 4543297a a17735a0
quit smoking
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
Crypto ikev2 access remote trustpoint Anyconnect_Self_Signed_Cert
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
No ipv6-vpn-addr-assign aaa
no local ipv6-vpn-addr-assigndhcpd 192.168.10.254 dns 8.8.8.8
dhcpd rental 43200
!
dhcpd address 192.168.10.1 - 192.168.10.100 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
NTP AAA server. BBB. CCC. Source DDD outside prefer
SSL-point of approval ASDM_Launcher_Access_TrustPoint_0 outside vpnlb-ip
SSL-trust outside ASDM_Launcher_Access_TrustPoint_0 point
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-4.2.00096-k9.pkg 1
AnyConnect profiles Anyconnect_client_profile disk0: / Anyconnect_client_profile.xml
AnyConnect enable
tunnel-group-list activate
internal DefaultRAGroup_2 group strategy
attributes of Group Policy DefaultRAGroup_2
DNS-server AAA value. BBB. CCC AAA DDD. BBB. CCC DDD.
Ikev2 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
internal GroupPolicy_Anyconnect group strategy
attributes of Group Policy GroupPolicy_Anyconnect
WINS server no
value of server DNS 8.8.8.8 8.8.4.4
Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
Split-tunnel-policy tunnelall
IPv6-split-tunnel-policy excludespecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl_1
by default no
activate dns split-tunnel-all
IPv6 address pools no
WebVPN
AnyConnect value Anyconnect_client_profile type user profiles
username password XXXXXXX XXXXXXXXXXXXXXX encrypted privilege 15
username password XXXXXXX XXXXXXXXXXXXXXX encrypted privilege 15
attributes of username XXXXXXX
Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
attributes global-tunnel-group DefaultRAGroup
address pool VPN-pool
Group Policy - by default-DefaultRAGroup_2
IPSec-attributes tunnel-group DefaultRAGroup
IKEv1 pre-shared key XXXXXXXXX
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authentication
tunnel-group Anyconnect type remote access
tunnel-group Anyconnect General attributes
address pool VPN-pool
Group Policy - by default-GroupPolicy_Anyconnect
NAT - to-public-ip assigned inside
tunnel-group Anyconnect webvpn-attributes
enable Anyconnect group-alias
tunnel-group Anyconnect ppp-attributes
ms-chap-v2 authentication
!
Global class-card class
match default-inspection-traffic
!
!
World-Policy policy-map
Global category
inspect the dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the netbios
inspect the tftp
Review the ip options
!
service-policy-international policy global
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:24991680b66624113beb31d230c593bb
: endHi cwhlaw2009,
You must configure a policy Split-tunnel, if you want to be able to access the internal and local network at the same time.
It may be useful
-Randy-
-
Wireless and LAN problem with Thinkpad
Im having serious problems with my Thinkpad T61p on my wireless and LAN drivers (at least I think it is the drivers, could be something else). This can be a long explanation, but please bear with me.
Yesterday, after seeing an example on the net, I tried to connect my xbox 360 to my laptop. I thought I'd be able to play on the xbox wireless using the laptop as a gateway to my router. I never had any problems before with logins, and had the wireless on my home network.
After plugging in an Ethernet cable into the laptop and xbox (following the instructions, I had online), I became "Network connections", (start-> Control Panel-> network connections). I had used a cable to connect your desktop to my laptop before and normally when you go to network connections, the connection between them appears as an icon. This time, has no icon.
I decided to try and create a connection. At this point my wireless was still working because I was always browsing the net. On the left sidebar, I clicked on "create a new connection". Hit next, and then click the radio button "set up an advanced connection." "Accept inbound connections" option box pressed, the next button. Finally, a link has been created, but when I went to go again my wireless connection dropped. I went back and removed the link to "network connections".
I opened "Logins" and tried to connect to my home profile. No results. I tried clicking on 'Search' to see were there any other networks available and all I kept getting was: "the wireless radio is turned off. You want to turn on? ". Press 'Yes', landmark of waiting a few seconds, click on 'Search' again, same message. No matter what I did, I couldn't get the wireless to turn on. So I found this thread:
and decided it was best to update access connections. It came as a default as version 4.42 so I updated to 5.12. Rebooted and tried again. Now the wireless starts up fine, but when I look for my router connections, some networks are located.
Next to this thread:
http://forums.Lenovo.com/LNV/board/message?board.ID=Special_Interest_Utilities&thread.ID=524
I updated my drivers and countless other things without success. I've updated wireless drivers from this page and dial-up connections to:
http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-67853#wireless
Another strange thing I see is that when I try to 'Create a new connection' 'Network connections', select 'Create a home or small business network', keep the progression through each other, it is to choose connections it is said that both my wireless and LAN are disconnected.
Wireless that I use is: Intel Wireless WiFi Link 4965AG
LAN: Intel 82566MM Gigabit Network Connection
It is not to have problems in Device Manager and that these two are enabled.
Does anyone have an idea of what is after occurrence and how I could fix this? Any help is greatly appreciated, because I need it for work soon.
It sets obtained.
Essentially had to uninstall the network drivers (not enough I know) from Device Manager and reboot. After the wireless and LAN is back!
Maybe you are looking for
-
Can I use an SDXC (512MB) card as a drive hard primary (such as startup HD with El Capitan) on my iMac 5 K - end 2015? It will slow down the performance of the iMac?
-
HY, I would ask, how you can score a point on a curve on the report. I analyze a few curves and take a peak of the curve and I want to mark the Summit to be seen on the report. Somethink like a point and a few lines to the axes X and Y, to see the co
-
cannot install adobe reader error 2350.FDI code
Subject says it all. I've always been able to install and use Adobe Reader but now I can't. "error 2350.FDI server error" appears each time around 71% to 96% installed. I use Windows XP Home w/Windows Explorer 8 Help! joec76
-
WMP11 offer any way to update (which implies to replace if necessary) all the tag library metadata contained in the music files? I use WMP11 and MediaMonkey that I find the UI of WMP11 to be very intuitive to use (example: ripping) and MM for feature
-
Hello I expanded a class of the screen to make my own dialog box. I added a Listfield to this screen. Each row in the list contains a label and a radio button, which are drawn by a custom Manager. Radio button events are received in the class that im