M40X & Mini Mouse Trust do not work

Similar Questions

• Satellite NB10T-A-101 - mouse pad does not work

  I have a touch screen for Toshiba Satellite NB10T-A-101, the touch screen works very well but I use mostly the mouse pad I find using the slider easier.

  But recently my guarded cursor freezing for a second or two and then to spend once again, but now the mouse pad seems not working with the left and right click buttons work but not the touchpad.

  I made sure the touchpad is enabled in the mouse settings, so I don't really know what to do now.
  Any suggestions would be greatly appreciated
  Thank you

  Hello

  Have Hmm you also checked the FN + F5 key combination?
  This would enable and disable the touchpad as well.

  But from my point of view, it would be possible that the touchpad module is malfunctioning.
  I m thinking about the hardware malfunction because the touchpad buttons work and just touch the touch work area module doesn't correctly.

  Usually, if the touchpad would be handicapped by any software, both; as well as the touch buttons does not work.

• Satellite L775 - mouse pad does not work properly

  I have a laptop Toshiba Satellite L775. I run Win 7 Home Premium. My mouse pad does not work properly. I also have a Logitech Anywhere MX wireless mouse. I tried the mouse pad to work properly with the key FN and F9, but it does not work. And you really have no idea if that turns or out of the mousepad anyway, subj for another time I guess.

  What does not work, but I have to do is to go to Control Panel then mouse option load that and just scroll the tabs without changing what each time and then close and the touch pad works. But only for this session. If I have my laptop nearby, or turn it off, I have to start throughout the whole process.

  What's past and how to fix this?

  Thank you very much.

  > What's past and how to fix this?
  After reading your ad, I still don t know what is your problem.
  > My mouse pad is not working properly
  How to understand this? What does not work properly? What happen exactly when you start your laptop?

• Satellite P750-136 - left mouse button does not work

  I don't understand what the problem is. My left mouse button does not work. If I put a little pressure on the Panel located under the button space then the left button of the mouse works.

  What should I do? It feels like a hardware problem, since I bought the laptop in November my laptop is still covered by the warranty.

  What you can do is to check the touchpad settings and make sure that everything is OK.
  I'm don't know if you noticed this since day 1, but if you think it is hardware problem I recommend you contact the nearest Toshiba service provider as soon as possible. Warranty will cover all repair costs.

• Re: Left mouse button does not work on Satellite L

  Hello

  I bought this computer notebook June 2010 and I never had no problem recently while watching movies has suddenly stop and happens quite often... and recently, I noticed that my left mouse button does not work correctly

  all useful suggestions please

  Thanks in advance
  Pramod

  Hi pramod_1,

  Have you tested an external mouse if the problem is maybe a few related software?

• SW5-271 switch 12 - functions of a mouse sometimes do not work.

  Hello

  Sometimes when I turn on the keyboard, the mouse functions do not work. I can't left or do a right-click and node pointer does not respond. Any ideas?

  Thank you!

  It turns out that maybe that's a physical problem. I ended up getting it exchanged and did not have problems with keyboard and mouse.

• I need a driver/files mouhid.sys, my mouse support does not work. Please thank you!

  I need a driver/files mouhid.sys, my mouse support does not work.  Please thank you!

  Hmm, a strange thing to have disappeared.  Do you have a virus or checked for malware scanner?

  The mouhid.sys file is supposed to be in % systemroot%\system32\drivers.  You pouvez find a copy of it in % systemroot%\dllcache.  If it's not in... \drivers and is in... \dllcache, recopy the... \drivers.  (You may need to do this in Mode safe.)

  Except for the above bit of luck, there are several ways to recover.

  1. use msconfig:

  Get your installation CD or locate a copy online
  Since an administrator account, run msconfig ( -R, msconfig)
  When "msconfig" opens, select the "Général" tab and click on the button "expand file...". »
  (This will open the window to "Develop a Source of Installation file")

  Enter 'mouhid.sys' in "file to restore:
  Enter the path to the DRIVER. CAB file in the \i386 on your installation media directory.
  (or browse to...)
  Enter "c:\windows\system32\drivers" in the "save in:" entry.
  Click "expand".
  'mouhid.sys' is now where never told you develop to...

  2 use the utility auditor of system files (SFC) to check the missing files and restore them if necessary.
  You will again need your installation media and, if you have installed the Service Packs, the CD-ROM for
  the latest Service Pack, you have installed.

  From an administrator account, type: -R, sfc/scannow

  SFC calls for, first of all, your installation media, and then later the service pack CD-ROM.  If SFC wants to replace the files, leave.  If the SFC rejects your Service Pack CD-ROM, read the KB900910 Microsoft Knowledge base article.  Note that this article applies to SP2, but is also applicable to the SP3.  Just use your common sense and use SP3 where the article refers to SP2.

  If you don't have a CD-ROM Service Pack 3, or order it (U.S. / Canada , Europe, Africa , Asia or South America ) from Microsoft or download the ISO (here ) and burn it.  Be sure to Select the appropriate language if you download ISO.  Note, I recommend that you install Service Pack 3 on a CD-ROM, rather than through Windows Update so that youpouvez use SFC with success!

  Please, vote if it is useful!  Please, click on Mark as answer if that answers your question.

• My optical mouse 3000 does not work even if the red light is on in the background

  My optical mouse 3000 does not work even if the red light is on in the background

  Hi Russell,

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, it looks like you are facing a problem with the optical mouse 3000.

  It would be great if you could answer these questions to help you further.

  1. have you made changes on the computer before this problem?

  2. you receive an error message or error code?
  3 is confined with any specific application?

  I suggest you to see the steps in the following Microsoft article.

  
  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-US/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Troubleshoot a wireless mouse that does not correctly: http://support.microsoft.com/kb/321122

  We would be more than happy to help you if the steps above did not solve the problem.

• The mouse settings do not work because rundull32 has stopped working

  My scrolling on the touchpad function does not work. I can't find any adjustments for the touch pad.

  I can't go in the settings of the mouse as "mouse settings do not work because rundull32 has stopped working".

  I tried to use Registry Mechanic and it did not work.

  How can I fix

  My scrolling on the touchpad function does not work. I can't find any adjustments for the touch pad.

  I can't go in the settings of the mouse as "mouse settings do not work because rundull32 has stopped working".

  I tried to use Registry Mechanic and it did not work.

  How can I fix

  do not use to all registry cleaners. they cause more problem, rather than their setting.

  type msconfig in windows in startmenu searchbox, and then press ENTER, then select normal startup, then click on apply then ok then restart your pc see if that fixes the problem? If it did not then:

  scanning using the preforms

  http://www.Malwarebytes.org/

  http://www.systweak.com/AntiSpyware/

  http://www.free-AV.com/en/download/index.html

  Make sure your system is clean first. use ccleaner to get rid of junkfiles http://www.piriform.com/ccleaner/download

  try to update your mouse driver software. (get the latest updates of your pc manufacturer website)

• The Microsoft 3500 wireless mobile mouse settings do not work.

  Original title: the mouse settings do not work.

  I had a mouse Microsoft Optical Wheel for several years and several computers.  I got the wheel button double-click on the value.  The mouse does not so I had to buy a replacement.  I found a Microsoft 3500 wireless mobile mouse, I couldn't find a wired mouse anywhere.  I downloaded the center of control of the mouse and adjust wheel double-click button.  It is not double-click.  The setting is in the program, the rest of the mouse buttons work ok, but he won't just double-click even if the program says it is how it is defined.  Windows 7 Edition home premium, door of entry DX4860.

  I guess Microsoft has known there was a problem after all, the last batch of automatic updates seems to have fixed.

• plugged an external mouse and now the keys and mouse pad do not work. in the properties it shows activated but the Activate button is not active.

  plugged an external mouse and now the keys and mouse pad do not work. in the properties it shows activated but the Activate button is not active.

  You can start in safe mode and restore the system.

• Mini HP which has not worked for a year at least.

  We have a mini HP which has not worked for a year at least. I try to get back to work and am getting a screen that says: enter the administrator password or start on password. Then the disabled system 83656543. can you please help?

  Hello

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the BIOS ( f10 ) and under the Advanced or the Diagnostic tab, you will find the possibility to run tests on the hard drive and memory.

  Post back with the details of any error message.

  Note:  If the option to run these tests is not available in the Bios Menu, use the menu diagnosis f2 .

  Kind regards

  DP - K

• Part of the tree with trigger WHEN MOUSE DOUBLECLICK does not work

  Hello
  
  I have the element of the tree to the form with dynamic data, these data extend to these point and maybe see the rim under this field, if the tree node show in the tree after scrolling element these point relaxation WHEN MOUSE DOUBLECLICK does not work.
  
  Any suggestion?
  
  Thank you

  I would use the WHEN-TREE-NODE-SET-trigger

• Open submenus when I stop on them with the mouse pointer does not work

  I used to use Vista Upgrade of XP until it hit the big time. With this installation, the option 'Open submenus when I dwell on them with the mouse pointer' worked perfectly well.  Since I did a format and installed the full installation of Vista version, and now this feature does not work. I checked and re-checked the option in the customization of the menu star and nothing. Also unable to find what anyone at the mouse settings itself.

  Does anyone know how to get this feature to work again once it's something I use a lot.

  Concerning

  Owen

  Hello

  If none of these help or you find a solution please report.

  Does work here on Vista either, but I don't want it works even if it is checked.

  Try UnChecking the start - Customize - Menu tab apply / OK and then go back and save
  Apply / OK.

  If no joy this initiative will eventually.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------

  Maybe something here: [check Control Panel - mouse or TouchPad (as applicable)]

  If a mouse (or if you use a touch screen and a mouse)

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Single click to open an item - APPLY / OK

  Control Panel - mouse - look for hover or click Automatic similar settings according to your mouse.

  When a TouchPad

  Look in the Notification area next to the clock for all TouchPad control program.

  Control Panel - mouse - also look for it TouchPad (mine is on the device however settings tab
  other brands and maybe on the other tabs and more than one). There are usually the parameters that
  can determine if a click, double click, hover or can open or close a program.

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Single click to open an item - APPLY / OK

  If some people are well positioned can change to some other setting if you plan to leave
  them that way and then change again.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• mouse pad does not work anymore

  Hello

  I had to take my laptop to Best Buy three times already in the last month because it stops just to work.  They insisted it was not a problem of HP or material and suggested that contact Microsoft because their suspicions, it's when a certain update comes through, it will start on the cushion.  Could this be true?  And, if so, why is that happening?  I don't know what specifically does update, nor do I have the time to find out.  In addition, I don't want to update the drivers EVERY TIME that happens to get my pad works again.  This is ridiculous.  I didn't buy this laptop with an eventuality I have to constantly update the drivers when Microsoft sends updates.

  Please notify.

  Thank you.

  TERI

  Hello

  You can contact HP directly, if it is still under warranty factory... usually 1 year... They may be able to help without worrying because you have a warranty extended through BestBuy.

  I have just returned your laptop to HP for touchpad\mousepad problems...

  My question is a little different in this mine worked, but did not work properly...

  When I tried to move the pointer, he'd try to scroll instead, or bring up the right-click menu.

  Sensitivity fluctuate wildly from extremely sensitive, to the point that tapping on it would not make a selection, and I have to use a button...

  Your most likely machine uses a Synaptics Touchpad. I tried all the drivers available. Some work better than others, but all have the same problem.

  A HP technician informed me that it was probably a defective touchpad, or possibly to the main Board of the laptop...  The touchpad feels a bit distorted, as it has a hump in the Center...

  It is with Windows 7 Pro SP1, not of Windows 8 and before Windows updates have been installed.

  It is possible that Win 8 is somehow causing the problem, but my guess is that it's a hardware problem like mine.

  For one thing... If the cushion sensor sends the wrong signal drivers not detect properly.

  Sometimes reinstalling drivers will fix it temporarily, but it will not happen...

  BTW... There is a setting that activates the light or not. Even if the light goes out it comes on briefly when you start the machine, and then after maybe 30 seconds it turns off... It is a function of energy saving do not use light.

  Try to uninstall the drivers and restart the computer... It will then use Microsoft drivers instead of the custom. None of the gestures will work, but the pointer and buttons should... just as a test.

  You can also consider getting a USB mouse, if it isn't to inconveinent. At least until you get a fix.