M476dw HP: HP m476dw squeaks constantly and loud when printing

Similar Questions

• OfficeJet Pro 8500 a: lack of cyan and yellow when printing

  I had been printing without problems starting the color on my out-of-true printing pages.  I replaced the magenta and cyan ink cartridges that were low.  The next pages print fine, then the problem started again.  I've cleaned printheads several times.  Problem persists.  The print heads are good, but the print quality report is missing of any color on it which consists of cyan or yellow depending on the diagnostic report.  The black text prints very well.  Any suggestions on what to do?

  Yes. After replacing the two printheads the printer works well again.

• Shows scrambled text and images when printing in line

  Hello. I have Windows XP Home Edition and using Internet Explorer 7, I have problems with printing online internet - it shows images and truncated text. I tried printing in Microsoft Word and it prints fine. It's just a problem with the printing of pages online that I'm having a problem with. I use a Canon color printer. Please help me on this. Thank you!

  Download of Firefox <-->

  The last Canon PIXMA iP1700 drivers for WIndonws XP are 26/09/07, so as long as you buy a decent time AFTER that--you probably use those.

• Color Laserjet M476dw MFP: use of colour toner M476dw when printing in black only pages?

  I bought a M476dw about a month ago.  After printing the demo page of color a few times and one or two color prints and then until I changed the default settings, there are a few pages with "accent color. Other that that, I've only been printing black pages since then.

  Supplies report says I have 70% left on my estimated (printed pages: 310 750 remaining) black print cartridge and the remaining 90% on all color cartridges three ((printed pages estimated 33 remaining > 1000)

  I realize, these are just estimates, but I'm surprised that 33 pages of printing almost all who were just the accent color resulted in 10% of the consumed color cartridges.

  I have printer connected directly to the wall and leave it on all the time, so no excess cleaning cycles are generated, and my default print mode is: black & white / grayscale printing.

  I know that provided cartridges are cartridges 'starter' but are there still other factors under MY control on colour toner consumption?

  Thank you!

  Jim

  Hi Jim, The M476 turn all durning cartridges a print job mono-noir, even if the color toner is not applied to the page.  It's features of the motor to the drum cartridge luberciate and prevent damage.  The rotation is counted even if there is no toner applied to the page.  As you mentioned the status of supplies is an estimate and is controlled by the firmware of the engine, and levels of toner alerts can be set to low or very low, with other settings under each heading.  Basically, the State of cartridges supplies is an estimate, based on the use and rotations or print quality may continue until the age is observed or impression continued after the alert status.  A research on HP support/troubleshooting on this topic could provide additional resources.

  Thank you

  Norm

• IMessage crashes constantly and diverts the processor

  Hello.

  So I'm in mac os el capitan in a recently purchased initially 2015 macbook air with all that outstanding and the imessage app keeps suspended every 20 seconds.

  for some reason, it increases energy consumption, CPU spikes and the fan starts constantly.

  I tried reddit, these forums and all that I can find a guy try to get me to dump files.

  So will there be an update so soon? I guess that's not my problem?

  FYI Etrecheck report says:

  Top of page process CPU: (Does that mean?)

  94% callservicesd

  52% securityd_service

  33% accountsd

  17% DCs

  6% securityd

  So, what to do?

  When Messages becomes insensitive, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Computer crashes constantly and now videos take forever to load and play.

  When I look at where they come from, my computer hangs like a madman and half the time, I just videos, case is not giving up the video.  My computer freezes constantly, and yet everything is updated and functioning.  I could be reading a news article and all of a sudden the whole system goes black and white and then after about 30 seconds the computer turns off.  I cleaned it with canned air and everything recommended.  Can I go back to Windows 8 and abandon 8.1?  I need assistance with these issues and in other words please.  Why this keep happening?  What are the viable alternatives are there for all these problems?  Nothing started happening until my computer updated automatically with 8.1 and now has been a year of nightmares constantly.  Help, please.

  Helpless and needs fixing

  I'm no expert, but I think that there is a problem with the Windows updates for 8.1 and HP desktop computers, dragged my mouse, its has been staticy with snoring and crackling and video would freeze intermittently. What finally fixed my machine was a complete restoration and blocking the windows updates. Now my machine is perfect except for the fact that the heartbeat sounds terrible. The beats are working fine now, they sound just terrible.

• The cursor flashes constantly and will not stop.

  Separated from this thread.

  It does not work. I'm not using Chrome. I use Firefox. The cursor flashes constantly and will not stop. Now, as I type, everything works fine. But in the contrary case, the cursor flicker with the small guard wheel busy with her.

  I had this problem as well - but it has happened when I loaded to the top of Chrome; I tried a lot of different things, but could not solve the problem.

  Then, I saw the post from TonyBrownCloudCo, and I knew he was on the right track here.

  Go to the Google Chrome settings > advanced settings

  Disable Google Cloud Printing - it is a used questionable spooler built-in Chrome browser, it must come from the recent update, because I've never had a problem with it before.

  I hope this works for everyone.

  "If you have explored all the possibilities and tried every permutation, everything that you have, no matter how irrational it seems, it is the truth." Quinn, 2012

  Hello Willie,

  Thanks for posting your query on the Microsoft Community.

  I imagine the inconvenience you encounter and I will definitely help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1 are you having this problem with Internet Explorer as well?

  2. you remember changes to the system before this problem?

  In the meantime, I suggest you return the form as follows article below and check if this can help:

  How to stop a blinking cursor?

  https://support.Mozilla.org/en-us/questions/943469

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you

• Envy 17 3D: fan runs constantly and slows down the system

  My HP ENVY 17 3D laptop fan runs constantly and slows down the system. I reduced some applications in the Task Manager and also cleaned the fan most of the time. But keeps the noise and the fan continues to run. Please what do I do?

  Kelvin1 wrote:

  My HP ENVY 17 3D laptop fan runs constantly and slows down the system. I reduced some applications in the Task Manager and also cleaned the fan most of the time. But keeps the noise and the fan continues to run. Please what do I do?

  Means that your mouths and radiator has more than dust on them and the fan does not work correctly. You have to disassemble and clean the fan and vents to let him work again properly.

• Firefox will crash/freeze constantly and reset to the default values

  For the last few weeks, I had a lot of problems with Firefox crashing. Whenever I try to open a new tab or load a web page, it will freeze. Sometimes, it's only for a few minutes, while other times it lasts up to an hour, and I have no choice but to close the program using the Task Manager, as any attempt to close normally fail. Is most common in the first few minutes after I run Firefox, and the program has been slow on this subject for a while, but usable after waiting a few minutes to load completely. As I said well that during the last weeks it has completely been lock up and crash when it happens, and it continues to occur after I have already loaded web pages and try to open new ones.

  I tried a complete new installation, and the problem has been resolved for a few days, however, after a few days without access to the internet and try to connect again, the problem is even worse than before. Now, from time to time my Firefox resets the default settings completely, dredging of my page "New tab" pinned tabs, as well as remove any topic, I asked.

  This parasite quickly made Firefox unusable for me, which makes me very angry that I much prefer it to Google Chrome. While I don't know that it would be useful to discern the question, here is also a list of all the extensions I have installed as well as the plugins that I have and that are still active, (with all my other plugins be disabled or 'request activation'). With the exception of "Adblock Edge", I had all the extensions installed for several months with no problems. "Adblock Edge" itself I only installed after uninstalling and reinstalling Firefox to try to solve my problem. My current version of Firefox is 35.

  Extensions:

  Edge of Adblock 2.1.7
  DownloadHelper 4.9.24
  0.1.7.3 private tab
  Adblock Plus 2.6.7

  Plug-Ins:

  Shockwave Flash 16.0.0.296
  Unity Player 4.6.1.51269

  Make a check of malware with several malware scanning of programs on the Windows computer.
  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

• Why my computer runs constantly indexing. When I try to close it keeps giving me the message: installation of updates 1 of 2.

  Why is my computer running constantly indexing

  When I try to close it keeps giving me the message: installation of updates 1 of 2.  I left this race for twenty four hours and he never finished.  I have to cut the power to shut down.  When I turn it back on, it is constantly indexing.

  Hi Gary,.

  ·         Have you checked if there is updates failed?

  Check to see if the following is useful.

  Step 1: search for the installation error code.

  To do this, follow these steps:

  a. click Start, click all programsand then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  (c) in the State of this window column, find the update failed to install and then click on the red X. A new window opens that displays the installation error code.

  d. Note the error number. You will have to type or paste the error number in a search box to the next step.

  Step 2: Run the next Fixit tool and then install updates.

  Diagnose and automatically fix common problems with Windows Update

• Printer is offline and will not print documents

  Printer is offline and will not print documents, the rocker switch "Printer offline" option is not available and it is constantly check on 'printer offline '.

  How can I fix this so I can print the necessary documents?

  Hello destiny.

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would be grateful if you could help me with more information.

  • Is the printer connected directly to the PC or it is on a network?
  • What is a printer wired or wireless?
  • What is the brand and model of the printer?

  Try the following and see if it helps.

  Method 1: Disable Antivirus

  If you have installed any third party such as antivirus or firewall security software, I would say you temporarily disable and check if it works.

  Disable the anti-virus software

   

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Method 2: Update the drivers for your printer.

  For more information, see these links:

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  
  Method 3: Restart the print spooler service.
  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click the print spooler service and then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  e. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation,
  type the password or provide confirmation.

  If nothing works, then manually add the printer to the local port and check.

  Method 4: Manually add the printer to the local port.

  a. go to control panel and click on devices and printers.
  b. click Add a printer, and then select Add a local printer. Click on create a new port. The default value in the drop-down list is Local Port. Don't change that.
  c. click Next.
  A dialog box appears for you request that you enter a port name. Type the name of \\computer name\printer.
  d. type your user name and the name of the printer (name \\PC\printer)
  e. click ok and exit.

  See also:
  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

  Hope this information was useful. Let us know the results once you have tried these methods. We will be happy to help you further.

• Photosmart 5510 not printing and noises when toggled or asked to print?

  About 6 months ago, we purchased our printer HP Photosmart 5510 alongside our Touchsmart computer, and so far, both work fine.

  However, there are a few weeks at random, when I sent a document to print, the printer started making a very loud noise, sounding almost as if he was that something stuck in the back there. Only to make the noise stop, I cancelled the printing and has turned off, which again triggers intense noise. This back on once again, he made the same noise and, before moving on to the usual display a notice on the monitor of printer flashed by saying that the device had extinguished itself incorrectly.

  It lasts for a few weeks now, and after having scoured your Web site for all the details, I couldn't find anything on this issue. After detecting that other factors may have come into it, I watched some of your videos on how to fix etc. paper jams. After pulling some paper in the back, I thought the culprit of all this, the message on the monitor said he had a 'ink cartridge problem' or could not detect the paper, even if we just replaced the ink and I have to reload the paper. I watched the videos of these two problems troubleshooting and tried 20 seconds thing etc, but nothing worked.

  Really, I'm so frustrated and I would like a little help from a very kind person out there?

  

  Hey mollycat,

  It seems that there is a problem with the power of the printer mechanism paper.  If the unit was loud noises, then it might be a part out of alignment or a piece of paper caught in the unit.  However, you mentioned the continuation of the measures is stuck, remove the paper, and now the printer gives error ink system.

  I will provide documentation of troubleshooting below for the two issues, but if these steps don't erase the question then I would advise to contact HP Technical Support on this printer.  Is it is only 6 months old, then it would still be under warranty by the original manufacturer.

  An "Out of paper" message on the control panel and the all-in-one doesn't pick up paper

  An alphanumeric Code (example: ' 0 x 'r' C2...) ") or 'Ink system failure' Error Message is displayed on the front panel when printing

  To contact HP Technical Support: contact HP worldwide | HP

  Hope this helps,

  Jason

• Devices and printers suspendusent/Print Spooler error causing printing issues

  Hello fellow forum participants and Rangers.

  As of recent, I had questions on our servers with regard to printing problems.  The problem would be to randomly appear and disappear without notice.  I tried to diagnose the problem by activating the event handler, but the event handler was not able to provide any specific error in addition "a timeout (30000 milliseconds) was reached while waiting for a response from the spooler service transaction.  Whenever I try to open "devices and printers", the window would without constantly/eventually without loading anything.  I would also add that the problem starts when the user connecting.

  I tried the things:

  (1) sometimes restarting the PC would magically make it work.

  (2) restart Printerspooler fix the problem

  (3) automatic setting rather than manual Bluetooth function has failed.  (has worked for most of the people similar/same problem).

  (4) we tried to reload the drivers.  Temporary solution, but the printing problem happen again.

  Any help would be highly appreciated and sorry for the wall of text.  This question led me into the wall!  Thanks in advance.

  PS. Windows 7 pro (32-bit) processor intel core 2 duo 2.2 GHz

  Hello SugardingIT,

  Thanks for posting your question on the Microsoft Forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Did you do any hardware or software changes before this problem?
  2. Were you able to print before this problem?
  3. You are connected to the domain network?
  4. What is the brand and model of your printer and your computer?

  Try the steps in the following methods and see if it helps.

  Method 1

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2

  If the problem persists, I recommend that you completely uninstall the part-time driver that has been installed on your computer and then download the latest driver on the printer again manufacturer site.

  Step 1: Try to remove the printer by following the steps described in the following Microsoft Article.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Step 2: Find and install printer drivers in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Please post back with all the necessary information and the result of the proposed suggestion and we will be happy to help you.

  Thank you.

• can I install my CS Master collection on my PC now and then when I buy a mac later install it on th

  can I install my CS Master collection on my PC now and then when I buy a mac later install on this computer?

  What version of the Masters Collection?

  The answer is no, unless you have CS6. Creative Suite serial numbers are for specific operating system: Windows only or Mac only.

  Adobe offers a process of exchange of platform (Win, Mac and vice versa) but only for the current versions and this is something all or nothing (you must abandon your serial number of Windows constantly to get the serial number Mac and vice versa):

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Order-Product-Platform-Language-swap.htm

  Creative software of clouds can all be installed on Windows or Mac with the same composition.

• Shockwave Flash has crashed; Firefox now removes all my tabs and groups when closing! Help!

  I sent a crash report. Everything was fine until I clicked on 'X' to close the program. A dialog box pops up asking if I wanted to close multiple tabs I had open. I clicked on cancel, checked my Options: I "When Firefox starts" the value "show my windows and tabs from last time" as always. I tried again to close Firefox and got the same dialogue. I clicked to close. I re-opened Firefox, reopen the now missing tabs, then click on it to close the bottle. Same dialogue.

  Judy

  Sorry to hear about the accident. You can share your reports of incidents with volunteers of the forum to see if it points to the solution. Please check the last section of the support article "Firefox plant - troubleshoot and prevent assistance fixing crashes" for steps get these IDs crash since the topic: block the page and then after the most recent here.

  Some users who suffer from the stop accidents reported that the problem occurs only with the Red 'X' button and not when they close Firefox by using the menu (either):

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Could you try next time instead as a workaround?