Mac/Bootcamp/CS3

Similar Questions

• Windows 7 on MAC bootcamp or parallels

  Hello

  Is this OK for me to buy an OEM of Windows 7 version to install on my Mac under Bootcamp (or parallel)? I looked to licensing and it seems it is the responsibility of the seller to sell OEM licenses with a preinstalled computer, but it affects me as a buyer? I'm warning so don't need any medium, etc.

  If I need to install later on another machine, I would just buy a new copy I know OEM is tied to a single machine. However, it would be cheaper to buy 2 x OEM a full detail.

  Thank you very much.

  As you can tell from an OEM version of the license terms is intended for resale and is also linked to the 1st PC it installed on and cannot be moved to another PC. But there is nothing preventing you to install and use for your Mac.

  J W Stuart: http://www.pagestart.com

• install windows on mac bootcamp AND like a machine... single virtual license?

  I have a mac and I want to install windows 7 on my second drive to load via bootcamp for when I want to use all the power of my computer for windows based tasks. I also want to be able to install it on the same mac once again, but as a virtual machine in Parallels for when I don't have the time to restart or for the less memory/CPU intensive tasks.

  I would be able to do it on a single license key /? See these 2 separate machines and it lock me up?

  You cannot use the same key even if it is a VM because it is considered as a separate computer. You will need to use a second key for the virtual machine, or choose an option.

  You can buy another copy here (Full Version) for the virtual machine:

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  Windows 7 EULA:

  3D. use with Virtualization Technologies. Rather than use the software directly on the licensed computer, you can install and use the software within the single virtual (or emulated) system on the licensed computer. When used in a virtualized environment, content protected by digital rights management technology, BitLocker or any hard drive full-volume encryption technology is perhaps not as secure as protected content not in a virtualized environment. You must comply with all national and international laws that apply to such protected content.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• After removing Mac Bootcamp in Windows 7, when you try to reinstall, "Windows key is already in use.

  I used to run Windows 7 on a Mac with Bootcamp. later, I removed the bootcamp on my mac and reinstalled Windows 7 on a PC. When I try to enter the Windows key, I received a message that the key is already in use! Any suggestions?

  Thank you.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• updated my mac and CS3 won't let me save files - my registration transfer (from 6 years ago) is not appear on the adobe site

  I upgraded my mac to El Capitan, and now I am unable to save the photos in photoshop. When I logged adobe, he says that I don't have the qualified products. I bought the master collection on eBay 6 years ago and transferred the license online... I put on different computers, makes updates, etc. and never had a problem. Store the material reception and transfer, btw.

  CS3 is not compatible with El Capitan

• The Mac in CS3 version, want to use it under Windows.

  Possible? It was purchased in 2008 and used it on a mac exclusively. I would like if possible use it on Mac and Windows. Obviously have the serial number, but it is not valid when I download and install CS3 for Windows.

  Your serial number is the specific platform, so your Mac version of CS3 will not work on Windows, I'm afraid.

• How to recover the file MAC AI CS3 for Win Ver 10

  I created a great brochure file on my Mac with AI CS3 and when I tried to burn a dvd to send to a printer the file converted into Windows worm. 10 I had always installed on the Parallels virtual machine installed on the Mac. I uninstalled Ver 10 and reloaded the file in CS3, but he still wants to save to a file Ver 10. Don't want that because the worm 10 gives a warning that the file was created on a later version and may not work right. How can I get the file back in CS3? Much help appreciated!

  You must have the default configurΘ for dΘmarrer with v10 trying to control click and go to open with in the dialog box get info and choose AI CS 3.

  In the dialog box options HAVE up to select AI CS 3

• Requirements for CS3 mac

  I have an old Mac running OS 10.5.8 and need to know if CS3 will run on it. Help?

  CS3 is a good version of Photoshop before Adobe added support for GPU.  I don't remember the conditions required for CS3, they would be not much different then CS6, with the exception of the GPU. What processor is has your old mac?  CS3 may require a processor intel nor and IBM power PC. I'm a windows user. I thing here period CS3 Mac were all OSX and Intel processors.

  Configuration of Photoshop

• Can I use PShop CS3 Mac work in PC PShop CS6?

  I want to move from a Power Mac G4 (2G of memory, 1 TB HD) for an Asus Essentio 1745-05 PC (memory 8 GB, 1 TB HD).

  I am 15 years old and more pictures on the Mac and Mac PShop CS3 bridge and do not want to find that they cannot be worked

  on, retirees, etc., on the PC Asus PC PShop CS6/bridge.

  I asked this question yesterday and received no answers. I am not clear in my question? It goes without saying that

  I can do?

  Thank you

  Bob

  Omke,

  Thank you for the many ways to recashe files for thjmbs and previews. Made after reading

  your first words I had done the first way that you describe, but I think I'll do the second way. My

  computer fun to stay up all night more that I do.

  Since 1994, I have used a Mac, and making the PC switch a feel like a traitor. Had a strange

  dream about it last night and my Mac friends say I'll pay for it. I need a much more powerful new

  computer for business I get now and just can't afford the price of the top of the Mac line.

  It is purely a decision of business/money. Sometimes I use my wife's PC and it drives me crazy, but I think

  I'll be able to work with the 8 installation of the new window.

  Curt has been helpful and of course, I'm a good person. Can I certainlly say this and much more on you!

  Thanks again,

  Bob

• How to remove BOOTCAMP?

  How can I remove from my MAC BOOTCAMP? Do I have to reform the disc?

  Boot Camp allows you to remove the Boot Camp partition.

• problem after download of windows on mac

  Hello

  I have macbookpro 13 inch with yoesmite of os x system.

  I installed windows7 professional & Office 2013 through bootcamp.

  later I have a few problems that I couldn't have managed it me:

  file 1 - mac bootcamp disappered. I can not connect a mac from windows.

  2 - icons & programs faucets is so small... I tried to make the biggest, but only the icons not the tabs.

  3. it shows that the driver is full although it doesn't have many...

  Thank you

  What happens when you restart the computer, and until the Apple logo appears and you hold down the button "C"? You are offered the opportunity to boot from your OS X disk?

  https://support.Apple.com/en-us/HT201255

  For problem number two, check out the following:

  Optimize the display of the scale and the problems of scaling on Windows 7

  For problem number 3, how much space was allocated on boot camp drive?

  I recommend not more than 100 GB if you plan to install Windows and programs such as office in addition to create data. It must also take into account files for updates of drivers such as music, videos, photos, Documents that can easily fill up the drive.

  You will need to remove Boot Camp disk by booting to OS X, and recreate it.

  Delete a Boot Camp partition . Macworld

  Restart the OS X and proceed to recreate with the right settings.

• iso Windows 7 64-bit Mac

  I am looking for a windows 7 Professional 64-bit iso ( For MAC BOOTCAMP), I have a code to use a backup, can someone help me :)

  Hello

  Yes, we do.

  Windows 7 Professional 64 bit SP1 ISO

  Let me know if you have other needs.

  Kind regards

  BearPup

• Jabber running Windows in BootCamp

  Hello!

  I can't find any reference to this, so I thought I'd try the useful people in the Forum.  Running the video Windows of Jabber version of telepresence in environment Mac BootCamp a supported configuration?

  Our client has successfully Jabber/Movi versions 4.3 - 4.0 without any apparent problems, but now is having some problems with 4.4 Jabber camera.  Namely, no selfview or video to another piece.

  iMac running 10.x (customer is uncertain who he is, will have to be 10.6 or 10.7 for Windows7)

  3.3 Bootcamp

  Windows7 Enterprise x 64

  Windows Jabber 4.4 Telepresence video

  built-in camera

  Thank you!

  Hi Bob.

  I just tested this configuration, and I can confirm that it works without any problem.

  My configuration:

  MacBook Air 11 mi

  Build in Facetime camera

  Windows 7 Professional

  Video of Jabber Cisco for Telepresence 4.4.3.14479

  Boot Camp 4.0.1

  When you perform a new installation, you choose which device use, what microphone to use and bandwidth measures. I recommend you to run this again to make sure that the configuration is correct.

  To run this installer again please make sure your customer try to rerun the "quick installation". You will find the quick setup in the menu key and screwdriver after connecting.

  Hope this fixes your problem

  Marius

• Product key valid for re - install Win 8 in BootCamp partition

  My Mac Mini (mid-2011, 500 GB Toshiba 2.5 HD) with a Win 8 installation enabled in OS x BootCamp is dead. (The logic board and HD are roasted) Can I reinstall a new version of Win 8 in another partition on another Mac BootCamp using the same product key to win 8 since the burned computer? If so, should I contact Microsoft Support number for this?

  Yes, you can, phone activation will probably need:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• With the help of Windows 8 license on Bootcamp.

  Original title: Mac Bootcamp with Windows 8.

  question 1 - can I use the license and bought Windows Pro 8.1 installer from the Microsoft store? I'm not sure about this, because what they acknowledge are users of Windows 7 and XP.

  2nd question - in case, I wanted to uninstall and remove my windows partition 8 (bootcamp) and use it for another time, but on the same computer and with the same method (bootcamp), can I re-use my license key?

  Thanks in advance to all who will answer my questions. My apologies for the way I asked my questions.

  question 1 - can I use the license and bought Windows Pro 8.1 installer from the Microsoft store? I'm not sure about this, because what they acknowledge are users of Windows 7 and XP.

  You cannot use the wizard upgrade in OS X. You will need to download it to a Windows-based computer that is running Windows 7 or Vista and create a. ISO file you need to transfer to OS X.

  2nd question - in case, I wanted to uninstall and remove my windows partition 8 (bootcamp) and use it for another time, but on the same computer and with the same method (bootcamp), can I re-use my license key?

  Yes, you can transfer the license to another computer, but you will need to reactivate over the telephone.

  Activation of the phone:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

  Thanks in advance to all who will answer my questions. My apologies for the way I asked my questions.

  You will need to use it on a Windows based PC running Windows Vista, Windows 7 or Windows 8/8.1

  An alternative is to download the Windows Enterprise 8.1 90 day trial and use it to facilitate the installation of the copy that you have downloaded.

  Download Windows Enterprise 8.1 90 days:

  http://www.Microsoft.com/en-us/evalcenter/evaluate-Windows-8-1-Enterprise

  Make sure you only download the architecture that is supported on your Mac, if you plan to use 32-bit or 64-bit of Windows 8.

  To learn more:

  http://Windows.Microsoft.com/en-us/Windows/32-bit-and-64-bit-Windows

  Once you have the Windows Enterprise 8.1 downloaded ISO 90 day trial, use it to install Windows on your Mac with Boot Camp 8.1:

  http://arstechnica.com/information-technology/2012/11/no-support-no-problem-installing-Windows-8-on-a-Mac-with-boot-camp/

  Once you have Windows Enterprise 8.1 90 trial upward and running, download the Windows 8.1 Upgrade Wizard and use that to install the copy of Windows 8.1 you buy:

  Also, make sure that you create the installation during the installation media:

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media