Mac can't see DJ 3050 j610 on wireless network

Similar Questions

• Mac OSX 10.8.4 can't see 5 GHz Linksys EA6500 wireless network

  Hello

  We have an EA6500 of Linksys router work of office. I found that Macs can't see 5 GHz network quite often but can almost always see the 2.4 Ghz network. If I restart the Mac then it can sometimes see the 5 GHz network but it's far from being reliable in trying to connect.

  Once all connected works correctly, it's just the operating system to display a list of network. If I same boot Mac in Windows 8 he can see the 5 GHz Wireless reliable every time.

  The office is in a shared office space, and there are many visible wireless in the room, about 12 now.

  I have the latest firmware of the router Linksys EA6500 (1.1.28.147876) and all software updates on Mac OSX. I fiddled with the network of automotive channels, to the setting of specific channels that seemed empty when I used a phone Android to see how busy they were.

  Has anyone seen or had any sort of resolution?

  When I get home, I have the same router and my Mac connect reliably, 100% of the time on the 5 GHz network.

  Well, I got to the low fo this. My steps, in case someone knocks something similar were:

  1. start of Fedora Core 19 Linux on my Macbook Air

  2 tries to connect to various networks near me, even if I didn't have the key

  3. notes that dmesg responded with 'country setting code' and then run dmesg and grep'd for the game of country codes

  4. after hitting one of the wireless networks, I noticed he would lie TW country code

  5. wireless network was not protected and so that a scan of the network, when her and found some web interfaces

  6. connected to the interface web and found it was a VCR Panasonic connect you

  7. once I had the wireless network manager I walked around the building with my iPhone looking force wireless looking where he was stronger.

  8. since I found that the reception office was where he was

  9. the person at the front desk denied that they had any router or wireless, it

  10. they opened a closet that had, a TV Panasonic inside recorder!

  11 identified the router right next to him.

  12A obtained in the region of router has changed for US

  Mac connect now to 5 Ghz EA6500 reliable, every time.

• My iPad 2 can't find my printer deskjet 3050 J610 series wireless

  Hello. My iPad 2 can't find my printer deskjet 3050 J610 series wireless. Can I do anything to make it work?

  According to the list of compatible wireless Apple printers, support is the deskjet 3050 a. j611a is there something I can do? Some driver?

  Thanks for your help

  The Deskjet 3050 isn't compatible Airprint as mentioned above.

  In order to print wireless from your iPad, you need to use the HP ePrint home & Biz application:

  http://support.HP.com/us-en/document/c02775166

  Kind regards

  Shlomi

• How is it, I can't see my iphone on my home network

  I am new to iphone, and I wonder why I can not see my iphone on my home network as I have my droid?

  See how?  In what context?

• I can't see the list of available wireless even when connected to wireless internet connections.

  I can't see the list of available wireless connections. So I can't connect to new wireless connections as I have not logged in before. The icon in the taskbar that would show you the possible connections disappeared. Nothing shows under connections network under Favorites network even when I'm logged in. I can pick up internet connections from earlier I can't see that one that is connected to or control it. Help, please. Thank you.

  Hi CorneliusE,

  1. what service pack is installed on the computer?

  2. what exactly happens when you try to view wireless networks? You receive error message nay?

  3. do you have security software installed on the computer?

  4 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article and check if that helps you find the wireless network.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  Note: Article applies to Windows XP SP 2, however, can also be tried with other versions of Windows XP as well.

  Method 2: If the method above is not enough, you can consult the following articles and check.

  How to configure TCP/IP to use DNS in Windows XP

  http://support.Microsoft.com/kb/305553

   

  To test TCP/IP connections by using the ping and the commands net view

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

   

  Let us know if that helps.

• How can I disable automatically connects to a wireless network?

  How can I disable the automatic connection on wireless network connection?

  In the lower right corner of your screen, you have an icon with several bars.  It is the WiFi icon.  A click on that and you will see a list of WiFi connections.  Right click the one you want to change, and then click Properties.  Click the connection tab and uncheck the box to automatically connect when the network is in range.  And then click OK.

  I hope this helps.  Good luck.

• How can I add a printer to my wireless network

  How can I add a printer to my wireless network

  John

  I assume that you have a wireless printer. If so, the software is different from each manufacturer, but it is similar to this. Before starting the installation, make sure that you have a USB cable at your fingertips and you know your network name (SSID) and wireless key. Install the software and follow the prompts to set up the connection Wireless for the first time. Once it has been set up you can unplug the USB cable.

  The USB cable is not required on subsequent computers, simply install the software and follow the prompts on the screen of an additional computer (or similar wording). You may need to enter an SSID and Wi - Fi key, after which the printer must be accounted for.

• Recently installed vista update. I can no longer connect to my home wireless network.

  Recently installed vista update.  I can no longer connect to my home wireless network.  I get a message that says 'wireless link failed because windows did not receive response from the access point or wireless router.  I troubleshott he said of computing could be from low signal strength and yet it shows the strength of 100%.  Anyone have any ideas?

  Hello

  Check the firewall it is maybe it has been reset.

  In general.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP Laserjet MFP M225dw: Mac can't see MFP HP Laserjet 225w

  My Mac Airbook (Yosemite, worm 10.10.3) worked very well with my HP printer MFP M225DW until about two weeks ago. It's all about my wireless network, and everything worked fine for the last year. I not made any changes to the printer, computer, or your network when the problem started, the computer saw the printer from the printer and Scanner funcdtion. The printer says it was online and available, but it is not one of the jobs I tried to print print. I tried to delete the printer, thinking I might add and who could solve the problem. Now, he doesn't see any of the printer. I checked and the printer and the Mac are on the same network. The printer worked very well for Mac from my wife, who is on the same network. It's only my Mac which can not see the printer. Can you help me?

  Hey @RJVezza,

  I'm very happy to hear that your HP Laserjet works fine now!

  It is good to have a firewall running on your Mac to block potential threats to access your system. Therefore, you can add HP as an exception in the firewall to allow your HP Laserjet full print and scan access, while keeping your computer protected.

  1. click the Apple and select System Preferences

  2. Select Security & Privacy

  3. Select the firewall tab

  4. Please turn ON your firewall

  5. then, click on firewall Options

  6. make sure that the box next to block all incoming connections is unchecked.

  7. make sure the automatically allow signed software to receive incoming connection is checked.

• DeskJet 3050 j610: unable to connect my printer HP Deskjet 3050 J610 to my network wireless at home

  I recently change my router a Netgear to a Lynksys wireless. I can't go to my printer. I tried to use the printer setup wizard thing (temporarily connect a USB key), which is on the printer stop blue wireless light flashes, but still couldn't print. When I print a report out of print it directly, the "Configuration Summary" shows the outskirts name (SSID) and Netgear84 (my old router). I can't get printing recognize on the new router/network.  Help, please

  Hey @dbot,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that you have some problems with the printer all-in-one Deskjet 3050 connection to your new router. I can help you with that.

  First of all, we will restore the default values of network on the printer. To do:

  Remove the USB cable to the back of the printer.

  On the printer, press the wireless icon that looks like a radio tower.

  Click on the white button next to settings.
  Click on the white button next to default settings.

  If there is a screen asking you to confirm, then press the white button next Yes. Blue wireless light should turn off.

  Now on your PC we will uninstall all software associated with the printer.

  Download and install the latest drivers by clicking on this link.

  Once installation is complete, you should have the printer connected to your wireless network.

  Please let me know if this solves your problem or if you have any other questions. If not, have a great weekend!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• can I erase the disc without any wireless networks

  I have a time capsule which is my wireless router.  I have not used for time machine because he has older backups of Mac and does not place to save my current iMac.  I can erase the disc without any wireless networks?  I do Air Port utility?

  I can erase the disc without any wireless networks?

  Yes

  I do Air Port utility?

  Yes, see the procedure below

  • Open AirPort Utility
  • Click on the image of the Time Capsule
  • Click Edit in the window that appears
  • Click the disks at the top of the next window
  • Click on clear disk
  • Choose the Quick erase option
  • Click clear

  The procedure will take only a minute or two

• Satellite A30 does not see other devices in the wireless network

  I recently bought a Toshiba Wireless LAN Mini PCI Card, I installed and was able to recognize my broadband, but he does not see the other network devices. I have not provided with drivers or software for the operation of the card (I bought a decent retailer). Can you recommend me to downloads that would be this card?

  I have a laptop of Satelite A30 1 GB ram 60 GB HDD.

  Large files sometimes also stop transfer (crashes) when you use my USB connection. The usb controller uses the driver microsoft 5.1.2600.0 dated June 1, 2002.

  Is this a driver problem?

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the WiFi network so all the computers must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the computer WiFi network so all must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

• Can't find existing printer on the wireless network

  I'm trying to establish a connection between a laptop recent Dell running Windows 7 and HP C7250 printer that is connected to the same network without wire connected to the computer.  I downloaded the correct driver from HP and during the installation process the installer wants to know how I want to set up the connection between the computer and the printer.  I select "wireless network" and the software goes out and tries to find the printer.  It relates, again, that there is no printer on the network.  I tried the advanced search option of installation of HP - looking for the printer using its IP address (which I have of it is implemented the process) but it is impossible to find out who way or the other.  The printer has already been successfully implemented to communicate with the network (it indicates that it is connected, provides the IP address, etc.).  I know that the computer works on the wireless network: she uses this path to connect to the internet.  I wonder why this printer is not found.  Troubleshooting HP message suggests that the computer security software can block recognition.  I am running MS Security Essentials.  Is it possible this?  The printer cannot provide the correct information on the network for any reason any?  BTW, this configuration was working at once but then stopped for some reason any.  I followed all instructions associated with this facility but havecome in the gaps.  Any suggestions on how I could disturb more pull this problem?

  The likely cause is the security setting. A few things to try:

  1. Open your browser and the IP address of the printer.  If the printer is properly connected to the network, you should see the web server integrated for the printer.  If this succeeds, then go to step 2, otherwise study why the printer isn't appearing any more on the network.
  2. Download and run the HP Network Diagnostic Utility. It will solve various aspects of network connectivity.
  3. If the above does not resolve the problem, then follow the steps in this additional debugging page, which may include to manually adjust the settings of the firewall as shown here.   There are a number of ports that the AIO units use to communicate with the computer.

• How can I change the name of my wireless network?

  I use OS X 10.11.4 and utility Airport 6.3.6. I would change the name of my network and I don't know how or where to do this. And once this is done, have what I would do with my extreme and Express to continue them to work?   Any help would be appreciated. Thank you.

  Cheers, Peter

  I use OS X 10.11.4 and utility Airport 6.3.6. I would change the name of my network and I don't know how or where to do this.

  You can change the name of the network using AirPort Utility as follows:

  • Run the AirPort Utility.
  • Select the AirPort base station and then, select change.
  • Select the wireless tab.
  • The network name can be changed in the field "name of the wireless network. Enter the desired name, and select update.

• Can satellite M65-S9092 - I put the wireless network card?

  Hello

  Can I put my card Intel pro 2200BG on Satellite M65-S9092 wireless network so that it is no longer compatible with Windows 7? The Intel Pro 2200BG is no longer supported by Intel as it was abandoned and so they have not issued a new driver so that IPv6 works.

  So I would update my card if possible.

  Thanks in adavnce

  Concerning
  Paul

  Hello

  I think that it shouldn't be a problem to upgrade the WLan card.
  As far as I know its a card wireless network of miiPCI and you would need to also use a WLan card which would support the miniPCI interface.

  The wireless network card supports two pins for the WLan antenna cable.
  Usually, you must connect a white cable to the HAND and a black to the auxiliary voltage

  All that s