Mac OS Lion 10.7.3 - can't get my HP photosmart C4280 print!

Similar Questions

• How can I get my HP Photosmart 1000 printer to run on Windows 7?

  How can I get Windows 7 to operate my HP photosmart 1000 that were previously running Windows XP?

  Hello

  According to HP here.

  http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796774&lc=en&cc=uk&dlc=en ,

  your printer is not supported in Windows 7.

  However, if you browse the HP support forums, you will find that some people have managed using spare HP drivers as a workaround. These are not official methods and cannot work or cause other problems. It would be prudent to back up your data and create a system restore point, if you decide to try.

  Don't forget that the 32-bit drivers cannot be used on 64-bit Windows (and vice versa).

• How can I get the software of the printer Canon - MG6170?

  How can I get the software of the printer Canon - MG6170?

  I can't fing it in the Canon Web Site.

  Help, please!

  I can only find it on non-English language Canon websites such as Taiwan and Hong Kong. You may need to use an online translator to find the drivers you need (assuming that they exist for your version of Windows).

• I can't install my HP Photosmart D110 printer. It says I need to install a driver. Any suggestions?

  I can't install my HP Photosmart D110 printer. It says I need to install a driver. Any suggestions?

  The HP Photosmart D110 printer is fully compatible with 32-bit and 64 - bit Windows 7 as indicated by the Windows 7 Compatibility Center on this page , but a free download is required for any operation. Report complete here.

  
  You can get the drivers and software from the HP Support site updates by clicking here. Determine if you have a printer D110a or D110b, then specify if you have Windows 7 32-bit or 64 - bit.

• How can I get my Toshiba laptop to print to my HP 4500 printer wireless?

  * Original title: install a wireless printer

  How can I get my Toshiba laptop to print to my HP 4500 printer wireless?

  Hello pastor,

  Thanks for posting your question on the Microsoft community.

  Thank you for your query details.

  I also like the fact you want to set up a wireless printer.

  When you connect a printer to your computer, or add a new printer to your home network, you can usually start printing immediately. Windows supports most printers, and you'll probably go out your way to install the special printer software. If you use Windows 8.1 or 8.1 RT Windows, additional printers and drivers are available through Windows Update.

  I suggest you follow the steps in these articles and check if it helps.
  Reference:
  Install a printer
  http://Windows.Microsoft.com/en-us/Windows/install-printer#install-printer=Windows-8

  HP printers - installing the printer wireless (Windows)
  http://support.HP.com/RS-en/document/c03278373

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How can I get my pay stub to print

  How can I get my pay stub to print. I told myself I need to download adobe reader, who have done so, but still cannot print heel

  Hi jerryk97573015,

  Make sure that the drive is installed on your computer Adobe - Adobe Acrobat Reader DC Distribution.

  Make a right click on the link pay Slip & click on "save link as", save it to your desktop & open with Adobe Reader. Go to the menu file-> Print.

  Kind regards

  Nicos

• Can't get my hp 8000n to print on my imac 10.6.8

  Can't get my hp laserjet 8000n to print from my mac 10.6.8. I have the printer connected directly to the imac. I tried the ping, but the printer doesn't ping. I really need to get this printer because it's how I make a living. I need this printer to print the halftone for a print job that I do. any help would be appreciated.

  Figured it out, thanks guys/girls.

• How can I get the rear HP Smart print icon in the toolbar?

  The HP Smart print icon used to appear in the Firefox toolbar. I had to reload Firefox. the icon no longer appears. How can I get that back? I use Windows 7.

  HP Smart printing (formerly HP Smart Web Printing) is supported only by IE 6 and later and is no longer supported on any other browser -it was a decision made by HP, not Mozilla.

  • See - http://h41112.www4.hp.com/smartprint/us/en/smart.html?jumpid=ex_r602_ww/en/hho/ipg/xx-mu-aw_chev/smartprint (click to enlarge section 12 at the bottom)
  • See - http://h10025.www1.hp.com/ewfrf/wc/document?lc=en & dlc = in & cc = us & docname = c01812475 #N152
  • See - http://h30434.www3.hp.com/t5/Web-Printing-Software/HP-Smart-Web-Printing-and-Firefox/td-p/105151/page/7 (it's the forum discussion HP 15/08/2009 to 28/08/2012; see last comment on page 7, dated 08/28/2012 by user Shirlzz1)

• Why can't get my HP Photosmart 2710 all-in-one printer to work?

  All-in-one printer, HP Photosmart 2710 don't scan.  Do I need a new or updated driver to date, and where I get it?

  I tried to reinstall it on my new laptop Toshiba, but he says it's incompatible.  It prints ok, just won't scan.

  Hello

  You can find thd drivers for HP Photosmart 2710 printer all-in-one from the link mentioned below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=420428

  Note: You can download the drivers until Windows Vista. For windows 7, win 8 and 8.1 will have integrated pilot. You can also check in windows updates for the latest drivers.

  If you have configured your wireless printer. Note the printer ip address and enter in the browser where you will have an option of detection.

• You are using windows 7, how can I get my Officejet Pro K8600 print on paper 13 x 19?

  I bought a laptop with Windows 7. Now I can't get my Officejet Pro K8600 to print correctly on paper 13 x 19. It prints on paper 13 x 19, but everything is 8.5 x 11 in size. I click on print, click Properties, change the Super B 13 x 19 paper, press ok, watch box paper 13 x 19 with images by filling out the document, I click ok to print and it prints the image 8.5 x 11 in size on paper 13 x 19 rather than fill the paper 13 x 19. I did not have this problem (and still haven't) with my old laptop with XP. It is the operating system or is it a bad setting in the properties? I tried to compare the property settings in both computers, but I can't find any differences. I don't think it's the driver... Please help!

  Hello HW,.

  Try this: go to devices and printers and right click on the of K8600 Officejet Pro and click on printer properties. Go to the Advanced tab and click on the button called Print Processor. Select Winprint. Try another print and see if it works now. If you still see the same question to see if there is an option of scaling in the print dialog in the application you are printing from.

• How can I get my 7520 Photosmart to stop printing fax reports

  How can I get my Photosmart HP 7520 to stop printing fax reports. Really don't need them and it old papers.

  Hi Smossmd,

  I appreciate that you try to stop your printer to print fax reports.  Try the following steps.

  1. go in the front panel of your printer.

  2. Select Fax.

  3. Select settings.

  4 Select Fax reports.

  5 Select Fax Confirmation.

  Let me know how it goes.

• How can I get my HP 7310 to print completely wireless (w/out Ethernet cable)?

  I managed to install my HP 7310 printer to my router wireless using an Ethernet cable.  However, I'd rather have my printer HP 7310 connected to my network completely wireless, i.e. without the need for a long cable to my printer connected to the wireless router.  Is this possible?  If so, what can / should do to set up the printer this way?

  Hello

  Your printer doesn't have a wireless card so you must connect the cable to the router / access point. You can also add a wireless for your printer print server (cost over $$) like this:

  http://compnetworking.about.com/od/wireless/SS/wirelessgear_4.htm

  Kind regards.

  PS, the above print server is for example only, please do NOT buy it, it is a bit of waste.

• Can't get USB - IEEE1284 (LPT) adapter/printer installed in Windows 8

  I recently bought a PC in Windows 8.  I have a printer (HP DesignJet 220) with the single port LPT.  I found and installed the printer driver 64 bits for this printer successfully and the printing device (DesignJet 220) shows up in my list of printers.   (Note that I have a HP 1055 all-in-One connected by USB on this machine and it works fine.)

  I bought and installed a USB adapter IEEE 1284 cable and Windows 8 recognizes the adapter (automatically, without having to load a driver).  Problem - when I put the printer port in the window of the printer device to the port of virtual printing USB003, all the instructions I've read - nothing happens.  I tried all USB ports and each port LPT in the list.  Sometimes I print a test page and get an error that the printer's paper (it is not), and sometimes the printer test page is going nowhere - a few stays in the print queue.   The function 'Enable bidirectional Support' is grayed out so I can't activate it (it appears as not controlled).

  The IEEE-1284 device says no printer.  When I try to change the printer driver in the IEEE-1284 device window, he said simply that the driver is up-to-date for the attached device (that he believes is 'none').  The printer is turned on and ready to print.   At any time the printer indicates that it has received all the data (on this model there is a flashing on the control panel when the data is transmitted).

  If I unplug the USB (on the adapter cable) to the computer, it is immediately recognized in the device window and the IEEE-1284 device is removed in the devices window.  If I leave the USB plug in and unplug the Centronics connector at the printer, nothing happens.

  How to make the printing device to connect to the USB port of the virtual printer?  On the other hand, is the problem in the IEEE-1284 device and how to recognize the printer?

  The problem is not the driver.  The problem is the interface.  Eight doesn't seem to work with most LPT drivers.  I tried two so far.  In addition, these interfaces are so old that most manufacturers ceased to provide drivers after Vista.  I tried an interface card (no luck) then a converter USB to LPT.  Eight did not recognize either.  I think the more specific question is if windows 8 supports parallel interfaces.

• Can not get queue on Photosmart Premium c309

  I just installed a Photosmart Premium c309 printer, I connected through the USB line to a HP Pavilion which has Windows 7.  I just can't get anything to print.  Each document is in the queue and does not print.  The scanner function works fine, the copier on the printer function works very well.  I deleted and reinstalled the driver several times – both on the disc that came with the printer and a driver downloaded from the HP website.

  During installation, I am asked to choose a picture to print, there are in the print queue.  If I try to print a test page, it is in the print queue.  How can I get this to progress so that actual printing occurs?

  Update: I found the print diagnostic utility 3.0 on another page of this Web site.  Downloaded and installed, followed the instructions, and my problem was solved.

• Safari is frozen with a notice that I have a virus Zeus on my MacBook Pro circa 2007 Lion running. How can I get rid of him. Instructions on the page including a number of Microsoft. Restart is not working or 'remove hard drive' as the threat of the page.

  I tried to not restart, no luck. Cannot trash page. Don't know what to do.

  You do not have a virus, given history and the clear, or just Safari Web site relaunch Safari with the SHIFT key is pressed.