Mac OsX 10.7.5 - uninstalled - now impossible to reinstall because of operating system

Help!

My scanner was saying were constantly "scan errors" and he asked me to reopen the windows... and if I don't it would break. Over and over again.

I thought I would uninstall and reinstall (it fixed it before)... big mistake. The CD supplied with the printer says that it cannot install because it is made for v10.5 and v10.6.

What the devil do? I need my printer!

Thank you!

I'm sorry that you are experiencing this issue. What kind of printer you have? I can check for you.

Here is a link on the Web site that has drivers, that you can check.

http://WWW8.HP.com/us/en/support-drivers.html

Tags: HP Printers

Similar Questions

  • Trashed photoshop CS6 on the staff recommendation. Now impossible to reinstall because I have the upgrade disc. I have a drive CS5 and CS6. Should I install CS5 and CS6?

    I trashed Photoshop CS6 to correct another problem and the expert advisor Adobe. Now, I can not reinstall because I have the update disc. I have CS5 and CS6 records. Should I install CS 5 and then CS6?

    Kglad.

    I juxt writing to thank you for your help. I guess I got my problem fixed. I went through another long Chat session. At the end of the day, I think that they think that the problem is related to the language. I know I deleted a large number of unnecessary languages try to slim down. The error notice I had the language concerned, it still doesn't work, but PS works and no cat said I had installed so English to ignore uninstall it reinstall guest. I don't feel real comfortable with that, but I guess it works. All this is not denying your effort to help me. I appreciate it. I think I found the box aside and giving you an exceptional. Thanks for staying with me.

  • I have a PC with Vista, I tried to install Windows XP, it was rejected, and now I don't have an operating system

    I have a PC with Vista, I tried to install Windows XP, it was rejected, and now I don't have an operating system

    Bruce,

    Do you remember if you wanted to do a new installation or had you partitioned your hard drive to install it in a dual boot with Vista?

    If you do not have a BONE now it sounds lik evous was the first choice that clears your current installation.

    You need to reinstall Vista from your original media to recover your system if this is the case.

    Unfortunately, if this is what you choose, you have lost all the data that was on your hard drive as well.

    Sorry to be the bearer of bad new possible.

    Rich

  • Error messages made me remove flash player, now impossible to reinstall?

    I kept getting error messages 1009 and 2026 (I think) of nowhere (but it could have been connected to the system updates). I couldn't fix so I decided to remove Flash player and reinstall it but I can't find anywhere to download from! I went to the official site and it tells me that I have not installed it but just sends me in circles. Plus I get the foot of page/banner saying: this website wants to run the following add-on: 'Adobe Flash Player' of ' Microsoft Windows third-party Application Compon...» "but when I click on 'allow' it keeps coming back!

    Someone please help?

    Hi sarahw57420774,

    I suspect you're on Windows 8.x.  If so, Microsoft integrates Flash Player for Internet Explorer, and updates are published through Microsoft Windows Update.  Given that Microsoft integrates Flash Player, they consider that the associated files system files protected and lock down permissions so that they cannot be removed, and the Flash Player uninstall program does not remove the. Manually deleting these files will break the integration and I am not aware of a way to re - install Flash Player before reinstalling the operating system.

    --

    Maria

  • Satellite M200 - first start interrupted, now it will not charge the operating system

    Brand new laptop.
    Initial commissioning where the operating system is loaded was interrupted and now when I try to restart the entire process just to get a message indicating that windows has been interrupted and restart before installing.
    However after restart "the same message reappears and I'm going round and round in circles. Any ideas please.

    I don't know what the problem is here, but I recommend you use the supplied recovery DVD and reinstall the OS. After 25 minutes only you will be able to start the clean operating system preinstalled.

    Sorry but this is just a logical step you must do in this stupid situation.

  • during the installation of Vista Service Pack 2, the computor has been disconnected. Now, I don't have an operating system and startup repair does not work. What should I do now?

    Computor was disconnected during the installation of Vista Service Pack 2. I did now no operating system and startup repair does not work. What should I do now?

    You may have to reinstall Vista from the original media or from the recovery partition according to the type of computer you have.

    Hope that you made the backup recommended all of your data before attempting to install Vista SP2.

  • Impossible to install a host operating system

    Install completely new for vSphere 5.0 on the new Dell server.  vSphere server and client installed on the appropriate machines.  Made datacenter and virtual machine made, but impossible to install OS on it.  Srv Win2008 installation 2.

    I tried to install from the customer and welcome CD, install from memory stick and install from ISO on the client.  I've disabled PXE and moved CD at the top of the boot list.  I hit f12 and specifically selected boot to a CD.  I still receive the "could not be found operating system".

    I can't find anywhere that tells me how to copy an ISO on the host drive and I do not know shell (said I don't).

    Everything I found on google is a dead-end.

    Any help would be great!

    Greg

    Welcome to the community - are you sure that the CD is bootable? To copy an ISO file to a data store on your ESXi host, you can use a program like winscp but you will need SSH access is enabled or using browser data store will allow you to copy the ISO file on your desktop into your ESXi hosr -.

  • HP Color LaserJet M476nw MFP: upgrade to Mac OS Sierra, version 10.12, now impossible to save scanned copies

    After scanning a document, the registration option is grayed out.

    Hello
    The HP scanning application is not compatible with Sierra, so you may experience problems.
    Remove the HP scanning by moving it to the trash, then empty the trash.

    Instead install HP Easy Scan below, it will be installed in the Applications folder:
    http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg

    If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
    http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip

    Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
    Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.

    Kind regards
    Shlomi

  • Could not update - now impossible to reinstall same CC for Mac

    New updates would not completely download.

    Trying "Fix" of Adobe to uninstall, clean, re-download and reinstall, uninstall part had problems (or 'mistakes' in the process or would not complete because of the ghosts' other applications in use").

    Then, after cleaning and try to redownload/reinstall, this process crashes with the same error as the download of updates.

    What is the real solution?  Adobe instructions do not work.

    I wrote a personal message to you please check.

  • Windows 10 killed all of the Adobe Suite. Now impossible to reinstall.

    I did the upgrade of Windows 10 and immediately lost all of the Adobe Suite.
    Photoshop takes over 3 minutes to not even open, then ran like a slug on fully specced by top of the line of Surface Pro 3.
    Premiere Pro does not open.

    I uninstalled them all that intend to reinstall, now cloud creative Installer install, so I am dead in the water until the problem is corrected.
    The installer returns an error 201, which is a kind of connection problem, but I have no problem with any other part of the internet, or my network, only the installer think that there is some kind of problem.

    I need it all back up and running and the need now, or I will cancel my subscription and buy an old version of disc shaped can I reinstall without this kind of waste to have to cross.

    I would greatly any suggestions as to how to install the Setup program in order to recover the suite on my computer and get back to work before you go broke.

    Hi Ezookiel

    You can try to connect to a different network and see if you face the same question.

    or

    Try the steps mentioned under heading "Connectivity issues to solve the problems" of the Doc following KB: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

    Kind regards

    Rahul

  • I uninstalled firefox, but impossible to reinstall because the internet explore is not work

    I wanted to reinstall firefox so I went to add/remove prog. and deleted.
    Now, internet explore is not working. I don't know how to tell if its disabled because of firefox making previously.
    The reason to install it again was because he stopped to hold my passwords.
    I have a second computer that I use to communicate with you.

    Hi zaqzaq,

    You can download the installer of firefox (http://www.mozilla.org/en-US/firefox/new/) on your second computer, copy it to a flashdrive and then install it on your first computer.

    I don't ' think that firefox does nothing to internet explore. The only thing I can think is that you may have firefox as default browser. However, would not prevent Explorer to work. If your question is about what's wrong with explorer, it might be useful to a microsoft forum.

  • uninstalled old, impossible to reinstall silverlight does not have a valid windows packet

    I have an older version of Windows XP Home, got a netflix... any computer expert suggestion of the guy? Please...

    This is an old model HP Pavilion, I can not just removed the old silverlight that is in it, he goes on to say that this is not a valid windows packet and cannot open the file but at the same time it will not re - install a new version of silverlight... someone help please...

    Hi Boy narry,.

    1. What is the full error message?

    2. are you able to download and install other programs at the level problems?

    I suggest completely uninstall Silverlight to the computer and then try to install the latest version of Silverlight and check if it helps:

    How to manually clean a broken Silverlight installation

    Download Microsoft Silverlight

    If you're still having problems with Silverlight, then I suggest you to report your query in the Silverlight Forums for better support:

    Silverlight.net Forums

    I hope this helps.

  • Still 6 disappeared - now impossible to reinstall

    I had 6 CC is still installed and have used it for several weeks. I went to use it this morning (after not using it for a week) and it disappeared. I have still my save files, but still seemed to uninstall itself. I went to try to install again the CC app again, but I can't seem to find the option of older version more. This feature has been removed?

    Please help!

    Thank you!

    I thought about it. I had to uninstall and reinstall the Office of cloud.

    Thanks for your help!

  • I installed the lightning and the conversation. I didn't like the conversation. I removed both and now impossible to reinstall the lightning, which I like very much. IDEAS?

    I tried to install 12 times lightning... everytime restart Thunderbird. Nothing happens.

    I use 24.6.0

    When your problem has been fixed, can mark the thread as "solved" Please?
    Thank you.

  • All printer drivers disappeared and impossible to reinstall because of print spooler

    Without apparent reason, all printers suddenly disappeared.  I tried to add a printer and received the error that the print spooler is not started.  I tried to start print spooler and 1068 receipts that dependencies are not started.  After the forum, I tried the following:

    Check that all dependencies and all are started.
    Checked the registry and RPCSS is the only data bound for the spooler service.  Deleted and retyped it anyway. Verified that there are no documents waiting to print.
    Tried to launch the program of MS. FIXIT
    None of the above has solved the problem.  I get always a 1068.
    Any suggestions?

    Sorry, it has not helped.  If you have not saved all data to be retained, I urge you to do as soon as POSSIBLE because something is badly corrupted in your system; and you don't know how long it'll be before things get worse.  You may need to restore your computer to factory settings, so make sure that you are willing to do.

    Here are a few things you can check. Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

    -

    Microsoft has suggestions and offerings to

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

    -

    Moderator Forum Keith has a few suggestions along this line to

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

    -

    If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

    -

    You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

    -

    Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

    `

    When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

    -

    I hope this helps. Good luck.

Maybe you are looking for

  • What updates do in fact I keep on my computer?

    In my folder or on my hard drive where you go to add or remove programs I have bunch of updates as "Security update for Windows XP" there's 21 of them.  Should I keep them all or I can safely delete some? I don't know how much memory they are using a

  • ENVY 17 j141nr: Beats Audio driver gone

    I had problems with my upgrade for Windows 10 of 8.1 and the fix was to re - install Windows from a boot disk. Now that I did, the re - install appears to have removed all my for Beats Audio and a few other drivers (HP drivers for my biometric scanne

  • Power supply purchasable R8500

    For international frequent moves, it would be interesting to get easily the tension provide as spare parts and purchase directly to Netgear.

  • Windows Media Player shows the library ghost

    I am running Windows 7 64 bit. I deleted everything in my music library, but Windows Media Player shows that I have several albums there. When I try to play songs, WMP says that they aren't there. When I try to delete them, nothing happens. Something

  • Just buy an upgrade to Windows 7 Home Premium to widows ultimate home... but get an error message.

    The message is: "the upgrade key entered is for an edition of Windows that does not work with"Windows Anytime Upgrade ". Would be grateful for the help, Phil.