Mac Pro early 2009-7950 HIS Itceq Turbo / 3GB

Similar Questions

• I want to exchange a larger HDD (Mac Pro early 2009) and at the same time improve Cougar to El Capitan.

  I want to exchange a larger HDD (Mac Pro early 2009) and at the same time improve Cougar to El Capitan. What is the best way to do it?

  I think the best would be a new installation of El Capitan on the new HD and reinstall the applications on the new HD, and then migrate the data and setting for the previous version of OSX. In this way the least unused stuff enters the new OSX version

• Upgrade Mac Pro early 2009 - new graphics card

  Hello.

  Ive inherited an Early 2009 Mac Pro - specs below - and would like to upgrade the video card for video editing. (Im trying to run DaVinci resolve 12).

  I can't find any more recent discussions in responses since 2013 so thought Id ask again. These answers described an "ATI Radeon HD 5870 Graphics Upgrade Kit for Mac Pro (mid-2010 or early 2009)" which I think is no longer available.

  Can someone help me identify a card that works in my machine - I need more than 2 GB of memory on the new GPU

  < personal information deleted by host >

  New and used for early graphics card Mac Pro is available on eBay.

  d-4-Mac-Pro-3-1-4-1-5-1-/181930743635?ha http://www.eBay.com/ITM/genuine-Apple-ATI-Radeon-HD-5870-1-GB-graphics-video-car...

  http://www.eBay.com/ITM/AMD-Radeon-R9-280X-3GB-graphics-video-card-for-Apple-Mac - Pro-4 K-2009-2012 221949039671-/? hash = ite...

• Installation of the 4x8Go memory modules on Mac Pro early 2009

  Can I install 4x8Go registered memory modules on Mac Pro 5.1 firmware installed early 2009 Mac Pro?

  I installed 4 modules, system preference, however installed 3 modules and 1 location of vacuum with the Red of error ON the CPU board memory.

  

  If you rearrange the same empty watch housing RDIMMs?

  If you use only two RDIMMs can you do this job to see the slow?

  What specific memory do you have?

  This

  http://eShop.MacSales.com/shop/memory/Mac-Pro-memory#1066-memory

  shows that only 16 GB DIMMs is registered.

• GTX 960 on a Mac Pro early 2009

  Hi all!

  I use a 2009 start Mac Pro 2 x 2, 26GHz Quad-Core Intel Xeon

  12 GB 1066 MHz DDR3
  NVIDIA GeForce GT 120 512 MB
  on OS X Yosemite 10.10.5

  I want to do an upgrade on the graphics card, but I don't know if the food for my mac will support it. I'm looking for the GeForce GTX 960. This need for the card cable to the two? What cable exactly? and it is safe?
  And another thing, where you can get the drivers for this card because in the nvidia site did not for OS X

  If anyone can help with this, I'll be very grateful.

  I heard that Qudro drivers may work...

  http://www.nvidia.com/download/driverResults.aspx/80893/en-us

  There should be 2 red cables, I think that already, at least they were on my Mac Pro to Mid 2010.

• Ask for help upgrade (Mac Pro early 2009 2x2.6 GHz Quad-Core)

  I am a videographer who has need to bring my Mac Pro from the dead. Cheesy with video files, but not parts of. My reading so far led me to look at in what follows. I'm looking for a better understanding of each of the following items and upgrades are beneficial and worth that may be too kill for a round of aging.

  1. Memory. I currently have 4x2gb or total of 8 GB of ram. I know this is ridiculous, I have not increased by at least 16 GB so far. However, I have read that memory can only help so much and that some of the items here are actual speed thrusters. How much memory is recommended for this configuration? Should I buy? http://www.Amazon.com/16GB-DDR3-1066-PC3-8500-1066Mhz-Apple/DP/B0098MLFJG/
  2. Solid State Drives. I currently have 3 disks internal thatrange of 500 GB to 2 TB. If I used that as my boot drive, where is the best place to install (see photo below)? I read of people installing in a Bay SATA HDD or SATA optical drive unused. I read good things about it. http://www.Amazon.com/Samsung-2-5-I...p/B00OBRE5UE/ref=cm_cr_pr_product_top?IE=U TF8
  3. Video/graphics card. First of all, both mean the same thing? Are the belowonly of slots PCI Express 4 for this type of card? Also, can you have two installed? I have the NVIDIA GeForce GT 120 512 MB series. What is the best way to upgrade? My research so far has led me to the GeForce GTX680. Looks like I'll have to buy it was good. T7ZS http://www.Amazon.com/EVGA-GeForce-DisplayPort-Graphics-02G-P4-3682-KR/DP/B00C81
  4. Processor upgrade. I'm intimidated by it due to intensive installation and prices. What would be the next best bet - upgrade to 12-core? Where to buy?
  5. Firmware? I've seen videos and forums on (4.1 - I) (5.1) or (6.1). I don't really understand what that means. Should I be concerned?

  

  Thank you!

  -The fastest drive is a blade of base PCle SSD. Very very fast

  The SSD to 'Classic' Mac Pro training

  -The bus SATA on the Mac Pro is only SATA II (3 GB/s) and connected to the bus SAT SSD is therefore limited to speed SATA II, not the speed of current SATA III (6 Gbps) drives.

  -You can get cards PCle who accept the standard SATA SSD and who can get speeds of SATA III

  -You can install several graphics cards. I have my 2009 MP, I have the original GT120 in slot 2 and a 5770 PC card into slot 1 (slot width double only).

  A graphics for PC cards will not display anything while booting, as well as an installed PC card can be used for the Startup Option or special start-up as recovery mode.

  For more information on graphics cards:

  Tip: Mac cards replacement Graphics Pro money Tour (2006-2012)

  http://www.macvidcards.com/index.html

  http://forums.MacRumors.com/showthread.php?t=1440150

  -J' would upgrade not processors. Frequently reading and writing to disk is the bottleneck.

  About the firmware, you can update the firmware of the 2009 to 2010 MP. Which allows the use of faster memory, using a processor six cores and audio mini displayport for the graphics card offline

• You can add 3 USB to a Mac Pro (early 2009)

  My Mac Pro is still going strong. I have a 2.66 Ghz Quad Core Intel Xeon with 8 GB of RAM.

  Is it possible to upgrade to USB 3.0 on this computer?  If so - how?

  Yes...

  Compatibility

  • Mac Pro (with card slots) - OS X 10.8.5 + (compatible OS X El Capitan)

  https://eShop.MacSales.com/item/sonnet%20Technologies/USB34PME/

• My Mac Pro early 2009 has two non-functional engravers.

  Reader superdrive in my Mac Pro and a Blu - Ray player are not recognized now. They were in the past. My OS is upgraded 10.11.5. I would appreciate any advice.

  < removed by host of personal information >

  -You say engravers.  Readers read the CD or DVD?

  -Is one or more optical drives?

  -They are readers Apple?

  -What happens when you insert a CD or a DVD?

  -Do they not show in System Profiler under burning drive? You should see the chipset in the enclosure, as well as the HD itself

  OS X: about system information and System Profiler - Apple Support

  https://support.Apple.com/en-us/HT203001

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• Mac Pro (early 2009) screen resolution

  So I have a

  Model name: Mac Pro

  Model identifier: MacPro5, 1

  Processor name: 6-Core Intel Xeon

  Processor speed: 2.93 GHz

  Number of processors: 2

  Total number of hearts: 12

  Memory: 64 GB

  Chipset model: NVIDIA GeForce GT 120

  Type: GPU

  Bus: PCIe

  Slot: Slot-1

  The PCIe track width: x 16

  VRAM (Total): 512 MB

  Provider: NVIDIA (0x10de)

  Device ID: 0 x 0640

  Revision ID: 0x00a1

  ROM revision: 3386

  Exhibition:

  BenQ GW2765:

  
  

  With the card NVIDIA GT 120... I thought that card might support a screen of 2K... but it seems TERRIBLE. I downloaded the driver for Mac El Capitan from nvidia, but it's not helping. What can I do to get the 2K resolution on my screen of 2K? I thought that this card supported.

  THX,

  Rick

  The ability to display resolution is also affected by the type and quality of connection mac and monitor cable (interfaces).

  For example, single-link DVI connection supports only up to 1920 x 1200.

  What cable do you use?

  It can help get more comments/responses from others.

• Mac Pro (early 2009) Analog Audio Line-in for Airplay?

  I have a stereo receiver and the turntable connected to my Mac via the analog line in port. The incoming audio signal is visible in the input Audio Pref Pane.

  Is it possible to listen to this audio on Mac?

  Is there a way that audio to device Airplay (specifically an Apple TV)?

  Thank you!

  Too bad. Rogue Amoeba to the rescue Airfoil. (A correctly worded Google search has been the key)

• MacPro will not connect to I-phone 6 via AirDrop WINE, Mac Pro (early 2009), OS 10.10.5. Phone is IOS 9.2.1

  My MacPro OS 10.10.5 nor my MacBook AIR OS 10.9.5 will connect via Air Drop to my i-phone 6 IOS 9.2.1 can anyone offer a solution?

  Unless you have installed a BT card/dongle supporting BT AirDrop 4.0 does not work

  If you send to an iPhone, iPad or iPod touch:

  • Your Mac must be a 2012 model or newer with OS X Yosemite or later.
  • The iOS must have Personal Hotspot device disabled in settings > cellular.

  Use AirDrop to send the contents of your Mac - Apple Support

• MacOS for MacBook Pro early 2009 Sierra

  I wonder if the MacBook Pro early 2009 to MacOS Sierra at any time in the future
  I have attached a picture of my macbook pro information

  

  Mac compatible:

  The official list of Mac compatible with macOS Sierra:

  Towards the end of 2009 or later

  • MacBook
  • iMac

  2010 or later

  • MacBook Air
  • MacBook Pro
  • Mini Mac
  • Mac Pro

  Your machine is not compatible Sierra. You are at the end of your life upgrade of OS X.

• Replacement for trust Mac Pro early 2008

  Hello

  Looking for a replacement for my very reliable and expandable Mac Pro early 2008.  I got it in 2009 after the death of my PC and on the eve of Apple, highlighted the 2009 model.

  Looking for a replacement and do not know whether to go for high spec 27 "iMac or Mac Pro.  Welder instead of videographer professional seriousness.  All I get will be faster than the current Mac Pro despite many improvements over the years.

  Thank you

  Matt

  As an amateur, I think you should seriously consider any movement until the 2009 model or later. Same factor form except the processor and RAM are on a shelf at the bottom of the Cabinet.

  They are faster because of some of the architecture changes, accept more RAM and still have the PCIe slots that allow you to add upgrades.

• Mac Pro early 2008 OS 10.6.8 at 10.11 on a new SSD upgrade

  Hi all!

  I want to spend my Mac Pro hard drive to an SSD with a new installation of El Capitan, but I also want to continue to use Adobe CS3 (I can't afford a new version... > _ <).  I read that some people have a lot of problems after upgrading their operating system, even when you use the legacy of Java 6 to CS3.

  Someone at - it good tutorials step by step to install a new OS on a SSD?  I have the adapter for my Mac to use the SSD drive also.  I'm not * that * tech savvy, so I don't want to spoil anything!  :\

  Would it not be possible to keep my current hard drive with Snow Leopard and run Parallels or Fusion for Adobe CS3 on my SSD?  I've never used Parallels or Fusion (preferences?), so where the Snow Leopard operating system to be need?  On a partition on the SSD or can it be on its own hard drive (the one I'm currently using)?

  Also do not know when I improve my OS, how do I tell my Mac to start El Capitan and not Snow Leopard so I keep the older operating system on its own hard drive?  It is system-> startup disk preferences?  Is that how I can go back, if I need to?

  Here are my specs:

  Mac Pro early 2008 (MacPro 3,1)

  Quad-Core Intel Xeon 2.8 Ghz

  16 GB RAM 800 MHz DDR2 FB-DIMM

  HARD drive 500GBx2 (one is currently my Time Machine, I'll use it as a backup of my photos)

  500GB SSD (no not in my Mac still installed)

  4 TB HARD drive (will have Time Machine on half)

  El Capitan would be really slow on my Mac Pro or should I go with the Mavericks or Yosemite?  I'm just trying to extend the life of my Mac as long as possible!

  I'm really sorry for all the questions!  Thank you very much for any help!  ^____^

  ~ Christina ~.

  -Unless you have already "purchased" Mavericks or Yosemite is is not available for download.

  -I just download the installer of El Capitan from the Mac App Store and run it and order that EL Capitan to be installed on the new SSD. You can then by pressing the Option key at startup to choose which version of the OS you want to boot from. You can set either as the default startup in system preferences > startup disk.

  -During installation, you use the configuration wizard to migrate SN drive stuff. YO can also do it later using Migration Assistant but who has created a new used with the migrated data.

  -With 16 GB of RAM and an SSD El Capitan will be fine

• Mac Pro early 2008 adding ram problems

  I recently added RAM to my Mac Pro early 2008. The Mac Pro recognizes only 4 of 8 memory locations. I moved the slots and moved the memory and all slots and all the memories are good. No matter where I put them, or what memory I use, the Mac Pro will see 4 of 8. Any suggestions? Yosemite run 10.10.5, trying to fill all 8 locations with 800 mhz 2 GB DDR2 FB - DIMM.

  Ron

  How are new?

  Where have you bought the new?

  All new are identical?

  All the 'old' are the same?

  What is the size of the old and new?