Mac update done away with my scanner on my HP 309 a all-in-one multifunction

Similar Questions

• I have a Mac osx Mountain Lion operating system and bought a 6510 e hpPhotosmart - all - in - one.

  I have a Mac OSX Lion mountain 10.8 operating system and purchase an e-all-in-one printer of hp Photosmart 6510.  I inserted the setting up the printer installation disc.  Received a pop up that States "unsupported operating system this Setup program is not compatible with the version of the operating system on your computer.  It is compatible only with 10.7 and below.  For more information, visit www.hp.com"Please help.

  Hello

  The software provided for Mountain Lion available on the HP site and you can download it below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107204-1&cc=us&DLC=en&LC=en&OS=219&product=5058336&sw_lang=

  After completing the installation, be sure to check for any HP Update availble by clicking on the icon Apple, then software update.

  Kind regards

  Shlomi

• I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  The Deskjet F4288 joined the printheads on the ink supply.  These are replaced at each change of cartrdige so there is no concern about printing empty color or black cartridges.

  You should be able to print in ink entry mode "backup" by removing color (or black, but not both) cartridges.  There will probably be a warning message about ink backup mode but you should be able to print and the printer will work regardless of the cartridge is available.  In handwritten backup with the only color black cartrdige mode areas will print in shades of gray.  If print ink backup mode only the installed color cartridge then black will be printed by mixing colors.

  See page 75 of the manual here, that says:

  Use the entry ink-backup mode
  Use ink-backup mode to operate the HP all-in-one with only one cartridge. The
  ink-backup mode begins when an ink cartridge is removed from the print cartridge
  transport. During the ink-backup mode, the product can only printing from the computer.
  You cannot start a print job from the control (such as copying or scanning a Panel
  original).

  NOTE: When the HP all-in-one device works in ink-backup mode, a message is
  displayed on the screen. If the message appears and two print cartridges are installed
  in the product, check that the piece of tape plastic protection has been removed
  each print cartridge. When the plastic strip covering the contacts of the print cartridge, the product
  cannot detect the cartridge is installed.

• 8.1 Windows Pro update the problem (from Windows 8 Pro) on Envy 23 TouchSmart all-in-One...

  Hello

  I have a HP Envy 23 Touchsmart all-in-one that I bought a year ago (12/2012). It comes preinstalled with Windows 8.

  System information:

  (a) Intel (r) Core i7 - 3770 S CPU @ 3.10 GHz

  (b) 8192 MB of RAM

  A few weeks after that I had bought the system, I've upgraded to Windows 8 Pro with Media Center that I bought through Microsoft upgrade program.

  Last week (19/10/2013), I saw the option upgrade to Windows 8. 1 in the store and decided to upgrade.

  After a few minutes, I got a prompt asking me to restart the computer, and I did.

  However, I noticed that the screen has turned white, but it restarts not really - I have seen that the hard drive light was still flashing and I waited for about 15 minutes. I know it does not restart because if that were the case I would have seen the HP logo on the screen of the BIOS. A little later, the system entered into mode 'sleep' (at least the light blinked slowly as if it was the sleep). As it was late at night, I decided to leave the system alone and decided to check on it the next morning. The next morning, he was still in mode 'sleep' (as I feared) - when I tried to wake up from her sleep by moving the mouse/hit the return key, he did the exact sounds as if he were to wake up from its sleep (as it always does), but the screen is still blank. The light power button lit up constantly indicating he's awake now.

  At this point, I decided to turn off the system by holding the button for a few seconds. To restart, I saw the HP logo on the BIOS boot screen and the screen went white and nothing came.

  So I decided do a system recovery using my Windows 8 recovery CD and turn off the system with the CD in its niche. This time, the system came and began immediately to restore my OS to a previous version.

  After connecting to the system recovered, I received the following message:

  "Could not update for Windows 8.1.

  Sorry, we could not complete the update Windows 8.1. We have restored the previous version of Windows on this computer.

  0xC1900101 - 0 x 40019.

  I tried to reinstall Windows 8.1 a couple of times after that. Once to disable all non-Microsoft services and disabling all startup programs. Always the same result.

  I have no antivirus software on my other system protection of Microsoft default system software.

  Any help, greatly appreciated.

  Thank you.

  I have disabled active secure boot existing starter and the update worked.  Now we get the error of watermark "secure boot not configured correctly.  But I have re-enabled secure boot and the error disappeared.

• How do you know if there is a compatible with El Capitan printer driver before buying the all-in-one printer?

  My all-in-one printer scanner Canon MX 860 lost the ability to print from the computer, now that I've upgraded to El Capitan. It didn't happen immediately, but now the buttons 'research' went to Canon interface, and the interface of the Apple System. (I spent half a day on troubleshooting, reset and download the drivers from Canon without success.)

  I want to buy a new all-in-one printer... (not Canon, thank you). I need to be sure that there is a 'friendly' pilot El Capitan before I buy and connect my printer. Interfaces for printer drivers are configured to "detect" my printer before the printer list is revealed. I checked Apple's site, but the model numbers are not exactly the same as the units that I compare before you buy.

  I am currently in Singapore where items back isn't something they do unless it is non-functional. You have chosen it, it works, you buy it, it's yours. I need to be sure about the drivers before you have the machine.

  See this link for compatible printers.

  Printer and scanner software available for download for your Mac - Apple Support

  Personally, I use Epson, configured as Airprint and have no problem.

• Error: The computer cannot communicate with the printer; printers HP officejet 4500 wireless all-in-one

  Original title: hp officejet 4500 wireless all-in-one printer / moved, unplugged and replugged and then in the new House when turned on laptop hp, now it will not find printer

  I need help with getting my hp laptop to communicate with my printer hp officejet 4500 wireless all-in-one, I moved and when I unpluggled everything and moved, when I tried to print something now my computer says it can not communicate with my printer, even if in the control panel it shows my printer has been verified as my default printer I don't know what to do?

  Hello
   
  What is the version of Windows installed on the computer? For example, Windows 7, Vista, XP
   

  Please answer the question above so that we can better guide you.

  For now, you can read the following article.
   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  Check if it helps.

• I don't remember the name of softerware for my HP All in one Printer

  I have a HP J4580 printer. I had my recently re-created PC. I don't remember the name of the software that I had which had all my functions in it. Scan, copy, e-mail, fax, percentage of printer cartridge.  Nobody know, don't forget the name of this software?

  Hello

  Could be the HP Solution Center or HP printer Assistant. Please select the operating system for your software features full doanload computer and the driver from the following link and install it on your computer:

  http://support.HP.com/us-en/product/HP-OfficeJet-J4000-all-in-one-printer-series/3645081/model/3645099/drivers/

  Kind regards.

• The scanner on my Lexmark X 2480 all-in-one does not work, is it a driver problem?

  Scanner on my all in one system will not work, all in a single system is a Lexmark X 2480 printer does not scan.

  Original title: driver problem

  Search for the latest drivers from the manufacturer's website.

  Support and downloads Lexmark
  http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en_US&ProductCode=LEXMARK_X2480#1

  Is this the same driver problem also posted you on here ?

• 'ink system failure' error with code oxc19e0023 on a HP Photosmart Premium all-in-One Printer - C309

  'ink system failure' error with code oxc19e0023 on have a HP Photosmart Premium all-in - One Printer - C309g - did all resets and reinstall the ink also tried to replace ink with new carts HP... frustrated please help

  Have you tried the steps outlined in this article:
  http://support.HP.com/us-en/document/c03081973

  If not try the steps and tell us if it helps.

  Good luck!

• Scanner of HP officejet Pro L7680 all-in-one does not

  I have an iMac with OSX Maverick running and after that I have updated with the new software of Maverick, the function scanner no longer works.  I now give an error that says: cannot log on to the device.  I also can not re - install the package of software original HP of the CD because he says that is not valid.  I followed step by step on the HP download site and still no luck... Someone at - it suggestions

  Hello

  Please, first check the list and then download and install the driver:

  http://support.Apple.com/kb/dl907

  You may need to restart the computer after you install the driver.

  Kind regards.

• I had upgraded from mac to 10.11.3 & now my printer wireless HP Photosmart D110 All in One Printer is disconnected because of having Mac sleep for a long period of time.   How to connect the mac to the printer wireless?  I have the apple extreme route

  I have a HP Photosmart D110 printer got Mac upgrade to El Capitan 10.11.3.   As I had sleep mac for a long period of time, it seems the printer and computer (Wi - Fi) has been disconnected.   Now I can't print.  Need help reconnecting the mac with the HP wireless printer.

  What happens when you reboot both machines.

• Problem with the HP Photosmart C3180 for Vista printer all-in-one drivers

  Need help to reinstall my printer HP Photosmart C3180 all-in-One printer because I can not install the disk to download

  * original title - my computer went down and I had reinstalled Vista program, but my printer has not been reinstalled and I can't reload the disc to do this. I have a HP Photosmart C3180 all-in-One printer *.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=1146331&LC=en&cc=us&DLC=en&submit.y=5&submit.x=4&lang=en&cc=us

  Select your operating system to the above link > and then download the Drivers good > install according to the instructions from HP.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=1146331&LC=en&cc=us&DLC=en&submit.y=8&submit.x=5&lang=en&cc=us

  Installation, configuration, etc. info at the link above.

  For any other questions about your printer, contact HP:

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us&product=1146331&lang=en

  See you soon.

  Mick Murphy - Microsoft partner

• Why can't print with my photo on my photosmart tray 6520 all-in-one printer

  I haqve never been able to print photos from my photo on my photosmart printer tray all in one.  How can I do?

  Tounsiiaa, but he still pulls paper from the main paper tray but prints in the center of the page.

• OSX Lion scanner all in one HP psc 1110 drivers

  Hello, I just bought a Mac running Mac OS X Lion, and I was wondering if there are any drivers that will allow me to use the scanner HP psc 1110. This all-in one 8 year, is still quite reliable and sufficient for my occasional printing and scanning needs.

  Hello

  The PSC 1110 is no longer support scanning using any superior to Mac OS X 10.4, but only provide printing features.

  Print only supported for your model (HP PSC 1100 Series) that you can find below:

  http://support.Apple.com/kb/HT3669#HP

  To scan with the device, I think your only option is to use any 3rd party scanning software as Vuescan that support the model of your scanner (ranked from MCS 1100)

  Kind regards

  Shlomi

• all-in-one printer, HP Officejet 4315xi range & hp Pavilion with Windows 7

  Printer has said he is ready and he is printing of the document that I send to print, but nothing happens. does not print.  I ran troubleshooting program.  Have tried everything I know without success.  Can you help me?
  Thank you

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP Officejet 4315xi all-in-One Printer - drivers<- set="" to="" your="" version="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=1138347&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP Officejet 4315xi all-in - One Printer - support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=1138347&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">