Similar Questions

• SD not detected by the MacBook Air early 2014

  My MacBook Air early 2014 does not any activity when I put in my SanDisk Ultra 4 GB card in the card reader.

  I searched through further discussions, and I have already made sure I put on 'hard drive' on my Finder preferences, put the SD card to 100%, 90%, at halfway, I locked and unlocked and semi locked SD card... no activity at all.

  I need card SD since my camera is broken and I can't use my USB with one more.

  You are looking in the disk utility?

  You have another SD card to test with?

  The slot is maybe defective.

  Ciao.

• I use photoshop elements 12 on Macbook air and the screen freezes when I try to use the tools. Then I have to force quit if I lose my job. someone knows how to fix this?

  I use photoshop elements 12 on Macbook air and the screen freezes when I try to use the tools. Then I have to force quit if I lose my job. someone knows how to fix this?

  What version of Mac OS X are you using? If the Yosemite, you will need to upgrade to 10.10.1 or higher version.

  In any case, start by going in the editor preferences > general, click this button and the restart of the Editor:

  

• MacBook Air 13 inch screen keyboard brands

  I just bought a macbook air for the College and as anyone who has already purchased an expensive product, I want to take good care of it, then it will last me a good amount of time (at least until I've finished law school). After some research on the web, it has come to my attention that the keyboard can scratch the screen when the laptop is a full backpack (quite a typical scenario in the lives of students). Should I put a cloth Microfiber between the keyboard and the screen when I close the laptop or should I invest in a screen protector or is my stupid just afraid with no. anchor in reality? Thank you in advance!

  Do not use Palm or Cap covers on a MacBook Pro with Retina - Apple Support display here, is what Apple thinks about it actually, I guess that the cloth would increase the pressure and it can cause more damage, especially if it's the MacBook Air. And I also think that a cheap and quality product should not damaged so easily. Worry is not about this, your MacBook is self-sufficient

• Spread juice on MacBook Air 13 "2014

  I have juice spill on my MacBook Air 13 "model 2014 A1466. MacBook works fine, but when I want to watch YouTube videos it starts to use Paste (but laptop is not hot) and Macbook starts to slow down. Kernel_task is also at this time in the 300 surveillance system. What should I do?

  Unfortunately, Mac is not waterproof. You're lucky if it still works after contact with your favorite juice. Usually the devices and water don't mix and water damage are not covered by the warranty. Corrosion has already begun.  You must schedule an appointment of genius at the Apple Store to evaluate the level of damages. They will offer you the best solution.

• can I use mac os and windows os alternative to the model of macbook air early 2014

  Hello

  I have the macbook air 13 inch

  Series No C0 * 085

  I want to use both mac os and windows os alternately in my Mac... is this possible.

  < personal information under the direction of the host >

  Yes.

  (139862)

• MacBook Air (early 2014) El Capitan impossible to install Windows using Boot Camp Assistant 10

  The ISO image has been downloaded from Microsoft.

  I was using a 8 GB USB (although not a brand new, but erased and formatted by disk utility).

  When the State of the task of the Assistant Boot Camp completed "Windows Backup Software Support", Mac restarted.

  As we see from the videos of YouTube, the Mac should start in a configuration of Windows but my screen as usual!

  Still, he resumed the partition (in my case 40GB) but it is empty!

  Can even suggest what is the problem here?

  

  You can try a different USB2 flash drive? What brand is the current USB?

• Tap to click and three fingers slide no longer work after El Capitan update - MACBOOK AIR early 2014

  Things no longer work after the update are:

  1. TAP to click (I checked it on SYS PREF > TRACKPAD > tap-to-click)

  2 finger three windows

  3 Thre finger of several files and text selection.

  I have selected three fingers slide accessibility and options of the trackpad iv done 4 fingers to mision statement and app expose, but the problem is that these feature mission statement and the rest three fingers still work. :@

  It was just beautiful in yosemite please give a solution.

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. You have to re-create your trackpad settings. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• Help on MacBook Air early 2014

  On my Mac:

  Running: OS X Version of Yosemite 10.10.5

  Processor: 1.7 GHz Intel Core i &

  Memory: 8 GB 1600 MHz DDR3

  Storage capacity: 120,14 GB

  Hey guys so recently my mac received a message saying that the startup disk is almost full.

  The problem is my apps, movies, photos, audio and backups add up to about 18 GB while the other has 97,58 GB I was wondering if there was a way to get rid of the things in the other with them mess up my computer. Because before you have a mac, I got a laptop Acer Windows 7 that when I went to reset the factory messed up and it had to be repaired. If I'm slightly hesitant to do a Factory Reset / Hard Reset on my mac.

  First of all understand what OTHER includes:

  https://support.Apple.com/en-us/HT202867

  Then download OmniDiskSweeper and Grand Perspective (both free) Internet and open them. They will show all your files and respective sizes. Transfer to an external HARD disk or remove files, that you no longer want on your MBP.

  Don't forget to empty the trash. Then only the space is allocated for the new data.

  https://www.OmniGroup.com/more

  http://grandperspectiv.sourceforge.NET/

  Ciao.

• Failure screen MacBook Air 13

  Hi all

  Firstly, my apologies because of my English skills.

  I recently had a problem in my Macbook Air 13 (2014). I was on the internet with Safari and the left side of the screen started to Flash some lights. After a minute or two, 15% of the left side went completely wrong. There are a few vertical lines, the colors are completely false, as the pixels with colors, and it looks like a mirror. The left is on the right and the right is on the left. Vertical lines appear also in the first black screen with an Apple, and if I start by pressing cmd + s to try a fsck, this black screen is also affected. However, an external monitor works perfectly well.

  

  MacBook Air 13' 2014

  El Capital, updated.

  What I've done so far...

  Reset the NVRAM (alt-cmd-p-r) made

  Update checked

  Tap the box, and nothing happens.

  Energy is something (alt + ctrl + key lights)

  Material (reset and pressing D) test done. It says nothing about the screen.

  Cleaning with a cloth. Fact

  What is going on?

  I had this personally, you've cracked lcd, under plastic or something that damaged the lcd screen

  You will need to repair store in a proper apple store, expect to pay about $ 200 million because they will have to replace whole upper part that the screen cannot be deleted

• Is it possible to upgrade SSD on my MacBook Air (13 inches early 2015) and how much it will cost?

  Is it possible to upgrade SSD on my MacBook Air (13 inches early 2015) and how much it will cost?

  Yes, you can upgrade your MacBook Air SSD.

  https://eShop.MacSales.com/shop/SSD/OWC/MacBook-Air/2013-2014-2015

• Cracked screen internal Macbook Air use as office

  Dropped something on the top closed my screen... it's now broken and unusable.

  I intend to use the Macbook Air as a computer "desk top" and connect to a monitor and wireless keyboard and mouse.

  I have a Macbook Air early 2014, consider using

  Acer - 19.5 "LED HD monitor - black

  What cords/cables do I need to make this possible?

  Thanks a lot for your help.

  Depending on the monitor inputs, you would need an adapter VGA or a DVI adapter.

• 2014 Macbook Air check cable signal with Samsung Syncmaster 2494lw

  I already posted this in the wrong thread. I have a Samsung Syncmaster 2494lw monitor that I am trying to connect my MacBook Air to 2014 el capitan running. I use a bolt of lightning to the adapter HDMI from Belkin to connect on the screen, then a DVI adapter to HDMI on the screen. When I plug in the computer, I get the "check signal cable"; However, connect other computers to the monitor works fine, including another mac. Does anyone have a solution to this?

  Thank you!

  Hi seanay89,

  Thank you for using communities Support from Apple. I'm sorry to hear you're having this problem with your Mac. I think I can have you talked yesterday this problem so I apologize if this is a duplication, but if you have problems connecting your external monitor to your MacBook Air, you can find information and troubleshooting steps described in the following article useful, up to and including contacting Apple Support if necessary :

  Get help with graphical problems on the external displays connected to your Mac - Apple Support

  Concerning

• Pass an audition CS5.5 works don't not on 2014 MacBook Air

  Greetings!

  Just upgraded computers (on a 2008 MacBook) to a 2014 of MacBook Air (13, early 2014).  I had Audition CS5.5 on my old Mac, so I disabled it, installed on the new Air and activated.  Everything seemed to install smoothly, but when I open the program and open an audio file, it simply doesn't work, plain and simple.  I touched the game and nothing happens. I try with the space bar and nothing happens.  The play button lights up but nothing plays.  I can add effects to titles and see that changes are in the waveforms, but can not hear back.  Even after changing, I can't save these changes.

  The specifics:

  13 "MacBook Air (early 2014)

  1.4 GHz Intel Core i5

  DDR3 4 GB 1600 MHz

  Running OSX Yosemite (10.10.3, even my old MacBook with no problems)

  With respect to the hearing, it is CS5.5.  There do not appear to be updates available.  I know that I can go to CS6 and I have no problem to pay for upgrade, but it will only do it if I know for a fact that the issue will be resolved.  And honestly, unless there are updates that are earth-shattering, I'm perfectly happy with 5.5.

  So there.  Anyone has any ideas what could be the problem?  I did some research, but can't seem to find someone with I'm having exactly the problem.  Thanks in advance for any help you can provide!

  This means generally that the hearing cannot connect to the audio interface. You will need to check the settings in the Audio hardware / preferences of the hearing. You may also check the Mac audio and Midi to make sure that your audio interface is configured correctly. You have the correct audio drivers installed for your audio interface?

• U2414H, Macbook Air, waking up to the power saving mode

  When my MacBook is sent to sleep or I shut down the computer, the monitor will sometimes get stuck in a loop where he wakes up "Power Saving mode" then displays "Enter Power Saving Mode" then shut off again and repeat in less than a second. Also while I was trying to open the OSD menu to check if the resolution is set correctly (as described in validation) capacitive buttons are just hard does not work. Hope you can help.

  Serial No.: CN-0H8H7G-74261-46 b-36GL
  Revision A01
  Included computer: MacBook Air mid-2014 connected via mini-DP to DP cable
  Intel graphics card internal HD5000
  Run monitor to 1080 p 60 Hz

  The air doesn't have a DP (DisplayPort). It uses Thunderbolt. So, how you connect to our RFP U2414H?

  Unfortunately, Dell does not validate the test / this model of monitor on Apple, ports and software hardware. For this reason, Dell has no troubleshooting steps a lot to offer. You can post on the Forum of Discussions Apple and see what they say. Some apple users have mentioned using a bolt of lightning to HDMI adapter or love at first sight for adapter DP has had some success.

  Apple computer thunderbolt port--> crush on HDMI adapter--> Dell HDMI to HDMI Cable TYH2W, W69C3--> Dell monitor HDMI port

  Apple computer thunderbolt port--> crush on CDM--> Dell DP DP adapter cable--> Dell monitor port CDM

  Apple computer thunderbolt port--> maid in CDM adapter--> Dell mDP to DP cable--> monitor Dell DP in the port

  You have the latest version (11 June 2014, A01). Users of Windows 8/8/1 under their power management windows computer balanced high performance which fixed some issues wake-up call. Windows 8/8.1 on balanced allowed the DP computer to go to sleep. He confused the handshake of DP at the end of the screen. Have you tried to test with DP1.2 disabled in the OSD menu?