macbook air FoxPro toolbar disappeared

Similar Questions

• My photoshop just disappeared in my macbook air, I can't find any more, that's happened?

  My photoshop just disappeared in my macbook air, I can't find any more, that's happened?

  Hi shangshen,

  If you subscribe to subscription Creative Cloud, then open the application of creative Office Cloud > go to the Apps section > search for Photoshop, if its installed, then you can open it from there and if it's not, then just install it.

  Otherwise, you can also check under application for application to install everything.

  Kind regards

  Mohit

• MacBook Air wouldn't startup after starting get disk error

  I was getting full boot disk error on my Macbook Air 2012 model a few times, and then it stopped starting (folder flashing with question mark began to appear). I followed the instructions on this site If flashing question mark appears when you start your Mac - Apple Support

  but failed to copy data from the drive on an external hard disk. I could see my boot (MacintoshHD) on the disc utilities drive, but could the volume seems to be not mounted.  The size of the disk is 128 GB and only 12 MB seems to be free.

  1 has started the macbook in recovery mode. In disk utility, run check disk and repair utilities disk for the startup disk (MacintoshHD). No problems in the generated logs. The volume is not mounted and is dimmed.

  2 selected MacintoshHD and tried to unlock it. The system tried for a while, and the password window disappeared after some time with the MacintoshHD via disk utility.  When I restart the machine again in recovery, disk MacintoshHD reappears in the same situation.

  3. I was able to start the macbook after installing a new version of OS X in an external hard drive. During the installation of OS X, I couldn't copy the data from the volume MacintoshHD (possibly the drive is locked).

  4. I could not start my macbook in safe mode.

  My query is-

  1. I had not backed up my data by any means. What are my current options to copy my data MacintoshHD?

  2. because the MacintoshHD is locked and attempts to unlock it had no disk utility, it will help if I start my macbook target disk mode, connect to another mac via a thunderbolt cable and try to copy data?

  3. What are my options now to restore my macbook? Clear my boot drive (MacintoshHD) and reinstall OS X?

  Thank you

  Dip

  The next trick could unlock your boot drive.

  Boot into recovery mode, open Terminal.app and type

  Mount - uw /.

  close Terminal.app and reboot.

• MacBook Air 2015 is stuck on the loading screen after installing the update.

  I installed the updates on my MacBook Air and when I restarted the loading bar would stay right in the middle. I used the disk utility in recovery 'first aid' my drive mode, it was fine. I tried to start in safe mode, but the loading bar cling just at the end I reset the PRAM, but nothing works. Help, please.

  * Loading Bar *.

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

• MacBook Air receive not of software up to date.

  My MacBook Air, mid-2012, 1.8 Ghz, 256 GB, stopped to receive or read updates from the Mac App Store.

  I am currently on OSX 10.11.4 but don't get 10.11.6 updates

  Other updates such as those for iTunes seem to be installed well (iTunes 12.4.2).

  It happened once before when I was on 10.11.2, with 10.11.2, I installed 10.11.4 using a combo update from the support page, hoping it might solve the problem, but apparently not. If I can't get the updates through the App Store, I will use the support download page, however, I would like to regain the ability auto-updated as I might miss updates of security, for example, I didn't know it have been updated due to the recently discovered vulnerability of "Stagefright-like".

  I am connected to the Mac App Store with a valid Apple ID.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then try to update. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• 2012 MacBook Air not to close properly

  Hello

  I had problems with my MacBook Air from mid-2012. Lately he has not been able to restart without manual stop or stop in the Terminal (sudo reboot). I noticed that when I try, disappears from the menu bar at the top and Finder is unresponsive. I have reset the memory NVRAM and the SMC and have not made any progress. Here is the report of system EtreCheck:

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-06-19 11:21:41

  Download https://etrecheck.com EtreCheck

  Time 01:33

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click the [details] links for more information on this line.

  : Another problem

  Description:

  Mac not to close properly

  Hardware information: ⓘ

  MacBook Air (11 inch, mid-2012)

  [Technical details] - [User Guide] - [warranty & Service]

  MacBook Air - model: MacBookAir5, 1

  1 2 GHz Intel Core i7 CPU: 2 strands

  8 GB RAM not extensible

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 624

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1366 x 768

  System software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

  Disk information: ⓘ

  TS480GJDM520 disk0: (480,1 GB) (Solid State - TRIM: No.)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 400,24 (Go 180,49 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  BOOTCAMP (disk0s4) / Volumes/BOOTCAMP: 79,00 (GB 32.96 free)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Information crush: ⓘ

  Apple Inc. Thunderbolt_bus.

  Goalkeeper: ⓘ

  Mac App Store and identified developers

  Kernel Extensions: ⓘ

  /Applications/TunnelBlick.app

  [no charge] net.tunnelblick.tap (20141104 (Tunnelblick build 4560) - 2016-05-03) [Support]

  [no charge] net.tunnelblick.tun (20141104 (Tunnelblick build 4560) - 2016-05-03) [Support]

  / Library/Application Support/PeerGuardian

  xxx.qnation.PeerGuardian [no charge] (1.1.11 - SDK 10.2 - 2014-11-07) [Support]

  / Library/Application Support/VirtualBox

  [loading] org.virtualbox.kext.VBoxDrv (5.0.20 - 2016-05-09) [Support]

  [loading] org.virtualbox.kext.VBoxNetAdp (5.0.20 - 2016-05-09) [Support]

  [loading] org.virtualbox.kext.VBoxNetFlt (5.0.20 - 2016-05-09) [Support]

  [loading] org.virtualbox.kext.VBoxUSB (5.0.20 - 2016-05-09) [Support]

  / Library/Extensions

  [loading] com.cyberic.SmoothMouse (1.0.10 - SDK 10.8 - 2016-06-07) [Support]

  [loading] com.logmein.hamachi (1.0.0 - SDK 10.9 - 2016-06-07) [Support]

  / System/Library/Extensions

  com [no charge]. FTDI.driver.FTDIUSBSerialDriver (2.2.18 - 10.6 SDK - 2016-06-07) [Support]

  [loading] com.intel.kext.intelhaxm (1.1.1 - SDK 10.9 - 2016-06-07) [Support]

  com.marvell.kext.USBGenericPrinterClass [no charge] (1.0.0 - 2016-06-07) [Support]

  com.microsoft.driver.MicrosoftMouse [no charge] (8.2 - 2016-06-07) [Support]

  com.Wacom.kext.pentablet [no charge] (Tablet Chart 5.3.2 - 2 - SDK 10.8 - 2016-06-07) [Support]

  /System/Library/Extensions/MicrosoftMouse.kext/contents/plugins

  com.microsoft.driver.MicrosoftMouseBluetooth [no charge] (8.2 - 2011-07-27) [Support]

  com.microsoft.driver.MicrosoftMouseUSB [no charge] (8.2 - 2011-07-27) [Support]

  Launch system officers: ⓘ

  [loaded] 7 tasks Apple

  [loading] 162 tasks Apple

  [operation] 69 tasks Apple

  Demons of launch system: ⓘ

  [loading] com.intel.haxm.plist (2014-10-31) [Support]

  [loaded] 45 tasks Apple

  [loading] 162 tasks Apple

  [operation] 84 tasks Apple

  Launch officers: ⓘ

  [operation] com.barnesandnoble.nookconnect.plist (2013-05-02) [Support]

  [failure] com.logmein.hamachimb.plist (2015-09-03) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2013-02-08) [Support]

  [operation] com.wacom.pentablet.plist (2012-12-11) [Support]

  [loading] org.macosforge.xquartz.startx.plist (2015-10-16) [Support]

  Launch of the demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-06-13) [Support]

  [loading] com.cloudpath.maccmd.plist (2012-09-04) [Support]

  [operation] com.logmein.hamachi.plist (2015-09-03) [Support]

  [operation] com.makerbot.conveyor.plist (2016-01-04) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2013-02-08) [Support]

  [loading] com.transcend.TSRecoverHandlerHelp.plist (2015-12-29) [Support]

  [operation] com.transcend.TSSleepHandlerHelp.plist (2015-12-29) [Support]

  [loading] com.transcend.TSTRIMHandlerHelp.plist (2015-12-29) [Support]

  [loading] net.tunnelblick.tunnelblick.tunnelblickd.plist (2016-06-13) [Support]

  [loading] org.macosforge.xquartz.privileged_startx.plist (2015-10-16) [Support]

  org.VirtualBox.startup.plist [no charge] (2016-05-09) [Support]

  [loading] xxx.qnation.PeerGuardian.locum.plist (2012-08-28) [Support]

  Launch User Agents: ⓘ

  [failure] com.adobe.ARM. [...]. plist (2014-09-30) [Support]

  [operation] com.cyberic.smoothmouse.plist (2015-07-26) [Support]

  [loading] com.cyberic.smoothmouseupdater.plist (2014-11-25) [Support]

  [operation] com.hp.printerAgent.plist (2011-08-30) [Support]

  [loading] com.valvesoftware.steamclean.plist (2016-06-08) [Support]

  [loading] net.tunnelblick.tunnelblick.LaunchAtLogin.plist (2016-05-03) [Support]

  org.VirtualBox.vboxwebsrv.plist [no charge] (2015-09-10) [Support]

  User login items: ⓘ

  Workflow application (/ Applications/Flux.app)

  AppTrap application (/ Library/PreferencePanes/AppTrap.prefPane/Contents/Resources/AppTrap.app)

  Application of caffeine (/ Applications/Caffeine.app)

  BambooCore Application (/ Library/Application Support/Wacom/BambooCore.app)

  Other applications: ⓘ

  [ongoing] com.etresoft.EtreCheck.297312

  [ongoing] com.lightheadsw.caffeine.128992

  [ongoing] com.wacom.BambooCore.92192

  [ongoing] com.wacom.Consumer_TouchDriver.95392

  [ongoing] com.wacom.TabletDriver.95712

  [ongoing] org.herf.Flux.49312

  [ongoing] org.Mozilla.Firefox.67552

  [ongoing] se.konstochvanligasaker.AppTrap.94112

  [loading] 414 tasks Apple

  [operation] 185 tasks Apple

  Internet Plug-ins: ⓘ

  JavaAppletPlugin: Java 8 66 update build 17 version Check (2015-12-30)

  WacomNetscape: 2.1.0 - 1 - SDK 10.8 (2012-12-11) [Support]

  Default browser: 601 - SDK 10.11 (2016-06-01)

  WacomTabletPlugin: WacomTabletPlugin 2.1.0.2 (2012-12-11) [Support]

  AdobePDFViewerNPAPI: 11.0.09 - SDK 10.6 (2014-09-12) [Support]

  FlashPlayer - 10.6: 22.0.0.192 - SDK 10.9 (2016-06-19) [Support]

  Silverlight: 5.1.41212.0 - SDK 10.6 (2016-01-29) [Support]

  QuickTime Plugin: 7.7.3 (2016-06-01)

  Flash Player: 22.0.0.192 - SDK 10.9 (2016-06-19) [Support]

  Mathematica: 9.0.0.3824331 (2013-01-31) [Support]

  SharePointBrowserPlugin: 14.0.0 (2010-08-25) [Support]

  AdobePDFViewer: 11.0.09 - SDK 10.6 (2014-09-12) [Support]

  DirectorShockwave: 12.1.3r153 - SDK 10.6 (2014-06-24) [Support]

  The Safari Extensions: ⓘ

  Adblock more - Eyeo GmbH - https://adblockplus.org/ (2016-02-16)

  3rd party preference panes: ⓘ

  AppTrap (2012-08-24) [Support]

  Flash Player (2016-06-13) [Support]

  Java (2015-12-30) [Support]

  SmoothMouse (2014-11-25) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: WE

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 400,24 GB disc used: 219,76 GB

  Destinations:

  1 TB [Local]

  Total size: 999,83 GB

  Total number of backups: 5

  An older backup: 25/12/15, 14:11

  Last backup: 23/03/16, 03:23

  Size of backup drive: adequate

  Backup size 999,83 GB > (disc 219,76 GB X 3)

  Top of page process CPU: ⓘ

  Firefox 8%

  3% activity monitor

  3% WindowServer

  3% sysmond

  2% fontd

  Top of the process of memory: ⓘ

  Firefox 860 MB

  714 MB kernel_task

  Mdworker (4) 188 MB

  Mds_stores 156 MB

  UserEventAgent (2) 115 MB

  Information about virtual memory: ⓘ

  1.14 GB of free RAM

  6.85 GB RAM (1.69 GB being cached) used

  Used Swap 0 B

  Diagnostic information: ⓘ

  19 June 2016, 11:05:52 self-test - spent

  A few months ago, I tried to install Linux as a dual boot and had to wipe my drive but have not had any problems in the meantime. I currently have a Boot Camp Windows 10 partition, but it was installed some time ago. This could be my problem or is this something tied to the side Mac?

  Thanks for any help you have to offer!

  Remove the Wacom software, it is a known problem in 10.11.5

  Also check all Wacom is removed from Log-in Items(use the) Sys Preferences > users and groups > login items

  If Wacom tablet etc. is vital for your workflow — after remove you and test your machine - try to download the most updated the driver from Wacom.

• MacBook Air 5.2 not shut down or restart.

  Hello.

  My MacBook Air 13' with OS 10.11.5 won't close (or restart) - usually. I have had this problem since Yosemite, but don't remember exactly under what version it began.

  To be more precise: current stop, all icons disappear (as usual), but the image of the Office remains active. I can always start other programs is Finder that is affected. Trying to Force Quit Finder does not help. Repeatedly (say 99 / 100 to give a number) it closed normally, but nothing in fact different... Judge without plugging anything if there's a device problem. Saute all automatic connect points. Cleaned cache and preference files dead (using Cocktail).

  What is a way I can follow the Shut Down procedure to see where it falls? Activity monitor?

  Thanks for all advice :-)

  Found the solution in an another tread with (almost) the same Air. Uninstalling the Wacom driver (in my case using AppCleaner) solved the problem. I wasn't the way of editing, since the latest driver for my bamboo tablet was the same version I had installed... (5.3.6-6). maybe a new installation works, but for now, I'm better of without the tablet. Thanks to click!

• How to make the partition of Seagate backup so the Macbook Air?

  I just bought a Macbook Air 13' 2015, I have a seagate external hard drive backup 1 TB plus all my files in it, coming from windows PC and I switch to Mac, when I try to make a partition in disk utility, I can't select an option for partition, its greyed, but I can read/write because of the Paragon for Mac OS driver I want just a partition on my mac with Time Machine backup, but I can't use my external drive for Time Machine it will erase everything on my external hard drive. Thank you

  Unless you need to keep the Windows files you put on the disk and copied to the computer, then I suggest that you simply re - prepare the drive for use on Mac. Because the drive has been formatted on a Windows system you cannot partition via the Mac. But you can re-prep. disk using the partition scheme GUID for the two partitions and format of one of them for MS-DOS or ExFAT using Windows. But as I said earlier, if you do not need to use Windows and want to use for the backup on the Mac, then he prep exclusively for Mac. Use Time Machine backup requires a volume that is at least 2 or 3 times the capacity of the computer HARD drive.

  Drive partition and format

  1. Open utility disk from the Applications\utilitaires folder.
  2. After disk utility charges select the drive (entrance Out-bumpy with of the mfgr.) ID and size) in the list to one side.
  3. Click on the Partition or delete tab in the toolbar utility of disc that is activated. If both are enabled, then choose clear.
  4. Adjustable circular diagram to set the number of partitions if you want more than one. Otherwise leave the default of one.
  5. In the Group dropdown set the GUID partition scheme. Define the type of Format Mac OS extended (journaled).
  6. Click on the apply button and wait for the fact button to activate.
  7. Quit disk utility.

  [Permission to use any part of the foregoing has been granted by khati, exclusively, to theratter.]

• Why my MacBook Air is not restart?

  My MacBook Air is a little strange. When I click on the Safari icon, nothing happens. When I clicked through launching pad, it tells me "cannot open the application"Safari"because it is not responding."

  When I opened the window force quit, he says the only programs running are Finder and Safari. When I try to force quit Safari, nothing happens.

  When I try to reboot, I get the popup "Are you sure you want to restart your computer now?", but when I click on "restart" popup disappears and nothing happens. I wait when the countdown timer and restart on its own, nothing happens.

  Reboot does not work either.

  I tried to wait a while. Nothing.

  When I try to open Google Chrome, a pop up flashes for about one second, which says something about the interruption of a reboot, then breaks down to Chrome. (Even if I do twice on, in which case you would think restarting had already been interrupted, I still get the same error message and crash)

  The two other programs I've tried, Photoshop and Textwranger, opened and closed correctly.

  Yesterday and a few days before that, I was getting pop ups warning me that my startup disk was full. I went through and deleted most of My Documents, downloads, and the Desktop files and uninstalled all unnecessary programs.

  Yet, he always says I have only 12.58 GB free (120,11 GB). The vast majority of my files (87,73 GB), according to the about this Mac falls into the category of 'other '. So I don't really know which of my files that would be.

  I still have a good number of iPhone photos stored in iPhoto. Looks like those who would be present as 'photos' rather than 'other', but maybe not.

  I had planned to go to iPhoto external hard drive tomorrow night as soon as I'm on my home (where is my biggest external hard drive).

  And then to uninstall Photoshop, I guess the biggest program that I installed it, if I had still not enough available disk space.

  But now that same Safari does not work, I'm worried, that it could be more serious that comes to move some files from external hard drives. I use Photoshop a lot, so I prefer not to uninstall, if this is not what is causing the problem.

  Dumping iPhoto and Photoshop the best way to go? Or is there something else that would cause the large number of 'other' files and the problems I see.

  (It's a MacBook Air (11 inch, early 2014), running OS X Yosemite version 10.10.5, purchased by me summer 2014).

  Thanks in advance for any help!

  Try to download an Etrecheck report and if successful, please report it to:

  http://www.etresoft.com/etrecheck

  Ciao.

• MacBook Air 11 Facetime camera does not

  A friends MacBook Air 11, model A1370. After the installation of El Capitan the facetime camera has stopped working (No. Camera work icon is displayed in all applications). I tried all the solutions I could find:

  • Reset SMC
  • Reset the PRAM
  • sudo killall VDCAssistant & sudo killall AppleCameraAssistant

  Nothing seemed to fix it, so we left in East. And then surprise, after I installed a Digital Camera RAW compatibility update the camera started working. But our happiness was short-lived, after having put the mac to sleep it stoped working again. I have tried everything but no luck.

  I suspect that there is a process that runs after an update is installed, that somehow erased the bug in the operating system and that was why the camera started working.

  Does anyone have an idea why a camera raw compatibility update started the camera, or why it does not work? Thank you.

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• MacBook air suddenly slowed the navigation on all browsers

  Hello
  My macbook suddenly idle air navigation on all browsers over the last two days. I checked for viruses, malware and did a disk cleanup. But that did not help. It is not a DNS problem. I checked the internet speed, and it is optimal. I borrowed another macbook air and compared it simultaneously on the same wireless connection and my macbook air is on all fours. FileValut is not enabled. I'm on El captain. What else could be the problem? Any help, guidance would be much appreciated.

  Run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select 'open '.

  Select a problem from the menu popup box "Choose a problem", then "Start EtreCheck" in the dialog box.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• I lost some / most of my passwords in Safari on my Macbook Air, but Safari is always auto them on my iPhone, so they must always be stored somewhere, is possible to restore these passwords?

  In recent weeks, I noticed that my computer was storing the password and Safari auto-fill on a variety of Web sites seem to have disappeared from my computer. I never typed this passwords in my laptop (macbook air mid-2013), so for them to auto-fill on my phone, they must have been stored in the cloud, right? So is there a way to recover passwords on my laptop? I can't figure out a way to find a place to understand where these passwords are still stored so that I can get back them on my laptop that has no access to these passwords.

  Thanks for your help.

  Do you use iCloud keychain?

• Bug of the MacBook Air

  My Macbook Air just completely buggy. I was working on a project on Word and it kind just frozed. I can't get out of Word, I can't save my project. I can't close my laptop yet. There is nothing on the keyboard that works. What can I do?

  Can someone help me please?

  Press and hold the power button until the computer turns off. Restart the computer from the Recovery HD:

  Start at the HD Recovery:

  1. reboot the computer.

  2. immediately after the ring, press and hold the

  'COMMAND' and the 'R' keys together.

  3. release the keys when appears the utilities Menu.

  When the utility main menu appears, select disk utility and click on the continue button. In the left list, select your boot volume (entry indented). If you use El Capitan, then click the first aid tab in the toolbar. If you use Yosemite or above then click the repair disk button. If the disc is OK, then select Restart from the Apple menu.

• MacBook Air missing hard drive space

  I noticed that the free space on the hard drive on my Macbook Air has been quickly disappear even if I had not been adding lots of new files, certainly not enough to account for the 10s of gigabytes that disappeared last week. I cleaned it of useless media files, which gives him another 20 GB of space. The status bar it reflects accurately at first, but when I started the computer this morning, it had lost 30 GB of this adjustment.

  After you run WhatSize DaisyDisk, I see that they have both claim that my Air uses Go 296, which is in agreement with the about this Mac, but when you look at the size of the actual folders, there is no way that they measure is added to this amount.

  Using Get Info, I got the following:

  14.43 applications gb

  Users 42,45

  System of 7.77

  Library of 8.95

  That all adds up to about 74 GB of used space. WhatSize actually gives me different numbers. Where in the world are the other 220 or so lack of gbs? Any help would be greatly appreciated.

  (Note: although I typed this out, I noticed that about 8 GB of free space have disappeared in the status bar)

  Here are a few screenshots of WhatSize and disk utility. Of THE claims that 'other' includes 283 GB, but I can't understand what is included in whatever measure it as 'other '.

  

  

  

  If you want more accurate stats from the about this Mac, then to re-index your drive: Spotlight - how to re - index folders or volumes - Apple Support.

  Free space on hard drive

  1. see Lion-Lion/mountain/storage of the Mavericks display.

  2. you can remove the data from your file except for the folder/Home/Library /.

  3. visit The FAQ XLab and read the FAQ on the free space on your hard drive.

  4. also see release space on your Mac OS X startup disk.

  5 see where my disk space gone?.

  6 see the storage view.

  You must empty the trash in order to recover the space they occupied on the hard drive.

  You should consider to replace the drive with a larger. Check out OWC of readers, tutorials and boxes tools.

  Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are.

• Any battery MacBook Air saving tips and speed increases?

  Hello

  I have a Macbook Air 13 inch and I asked for some advice on how to extend the battery life and increase the speed of macbook air

  my mode is the macbook Air early 2014 256 GB SSD and 4 GB ram?

  Thank you

  Apps can affect the performance of Mac, battery, temperature and fan activity

  Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti...

  Do not leave the battery to fall below 10 percent, or you may not be able to recharge the battery once it falls to 0%. Never leave the computer on the charger. You need to use the battery from time to time in order to keep the electrons flowing and maintain a normal life.

  About the batteries in the modern Apple laptops

  Battery Universityy

  Apple laptops - batteries-

  Apple - Batteries

  Extending the life of your laptop battery

  MacBook and MacBook Pro-Mac reduced the speed of the processor when the battery is removed when using an adapter A - C

  Apple laptops-calibrate the battery in your computer for optimal performance

  County of Mac Laptops-determining battery cycle

  
  

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  How to fix the slow down time and start. | MacTip.net

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.