MacBook not recognizing Slate7

Similar Questions

• MacBook not recognizing HP F2210 all-in-one printer

  I installed the drivers from the disc and online does not.  The computer says the driver is installed and the correct printer is selected.  When I plug the printer to the USB port on the MacBook I are not recognized.  When I hit the scan on the printer I get nothing.

  My pc works fine with the printer is not the cable, or the printer.

  The USB ports are taking readers flash without problem.

  What is OK, what version of Mac OS X?  In addition, do not connect the printer to a USB port, plug it directly into your Mac.

  We will restore the print system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• MacBook Pro not recognizing the Cougar USB install

  I have a Macbook Pro 5.2-17 "retina display. I replaced the hard drive and I am installing Mountain Lion. The hard drive is not an SSD. It's a 500 GiB Western Digital SATA, partitioned with TPG and JHFS +.

  I started by installing El Capitan, because that's all I had. The installer of El Capitan is on an external USB drive that is partitioned. When I boot using the down Option key, the C key or command-R, the installer of El Capitan is recognized. I installed El Capitan, created an installer of Mountain Lion on a different partition on the same external USB drive and erased El Capitan the internal hard drive. When I boot on the USB setup of Mountain Lion is not recognized. Setup of El Capitan is recognized correctly. Why not available in boot manager during startup? When I got El Capitan installed, the two partitions have been recognized very well when I plugged in the USB. Both were mounted and appears on the desktop. So I know that the problem is not the USB key, or 2.0 or 3.0, or the recovery partition because I erased the disc and the recovery partition is no longer exist. How can I get the installer of Mountain Lion to be recognized at startup?

  I did the command Option P R, NVRAM reset several times. No joy. The only partition recognized at boot time is the installer of El Capitan.

  I want to level back to Mountain Lion because it is less intrusive than El Capitan and will be more familiar to the person who will use this computer.

  Oh, and more than two elements. When I start the installer for OS X from the external USB drive, I gives me three options on where to install TO - install OS X El Capitan, install OS X Lion mountain and Macintosh HD. Therefore the partition setup of Mountain Lion is recognized, but not as an installer to start from. Although when I plugged in the USB port when El Capitan was installed he showed as an installer Mountain Lion.

  Also, there is NO option to choose where to install FROM. If I have two installation programs, I have two choices of installation?

• MacBook is not recognized by parachuting on iPad

  Well well, boring as usual, he does not work for some reason any.

  MacBook Pro 15 retina "(mid-2012)

  iPad Mini (2013)

  Try to send a few photos from my iPad to my MacBook, the MacBook is not recognized by the iPad. The other way around is not a problem, I can see my iPad stated on the record of AirDrop on the MacBook and the transfer also works well in this direction.

  I tried several solutions, obv. Turning the air drop / disable / Bluetooth / Wifi, reset the settings on the iPad, iPad and MacBook reboot of the network, and so on, nothing works.

  The point is, maybe a month ago, everything worked perfectly in both directions, MacBook release the iPad and iPad to MacBook, just as I didn't expect. What I suspect, that is, after updating both devices with the latest operating system software, it probably stopped working as well.

  I can do to fix that? I just want to send you some pictures of the iPad for the MacBook using airdrop.

  Study it: https://support.apple.com/en-us/HT203106

• My HARD drive is not recognized by my PC (it was previously connected to a MacBook)

  Hello

  I plugged my WD HDD (model WD2500ME-01) to a Black MacBook and it was recognized as a 'Time Machine' drive.
  Now I plug it to my PC (Windows XP Home Edition) and the drive is not recognized, no 'letter' is not assigned to the player. Drive HARD watch as "healthy (protection GPT Partition) under 'computer management' window and I can't assign a letter on the HARD disk."
  I don't want to format the drive, I just need to save some files to it (a few concerts info).
  I was told that the use of a "Data Disc Recovery Tool" that reads the GPT Partitions will help me.
  Is there a way to 'Windows' to save the files?
  Thank you
  Nahuel.

  Hi NahuelEscobar,

  ·         You have 32-bit or 64-bit of Windows XP is installed?

  The 32-bit version of Windows XP cannot read, write, and boot from GPT disks. See the following link for more information.

  Windows and GPT FAQ

  You can use a different drive (Flash drive) to transfer the data from this computer to the external hard drive.

• WD My Passport Ultra 2 TB not recognized

  My WD 2 TB external is not recognized he was working in the morning and now, less 12 later, is not working.

  I have a light, but I just flashes

  I am running OS X Yosemite Version 10.10.5 on my MacBook Air.

  As I'm working away from the internet I have all my files pictures and life on this dam thing and now I can't make it work?

  I tried all the sons of other laptop but its still does not not can someone help please?

  Have you tried different cables and on the other Mac, Yes?

  Have you tried all ports?

  He reveals in disk utility?

  Finally, is to take the naked reader and install it in a known functional wardrobe and test.

  At the time, all of the hard drives fails, some more earlier and some later.

  Ciao.

• External hard drive not recognized

  It seems as if my Macbook Superdrive is not recognized by both my MacBook after upgrade to El Capitan.  I took my external drive to the Apple iStore, it has been tested and I've been told that it does not.  Then, I bought a new disc (R1999.30 - a lot of money!), and after connecting to my two computers today, I realized that this new album is also "does not work".  After each update, something that has worked well in the past, does not work. Has anyone found a solution yet?

  How you try to burn the disks?

  You get an error message? So then what?

• How can I get assistance when my serial number is not recognized? Please

  How can I get assistance with my serial number is not recognized? Please

  you have called apple and they do not have a record of the serial number of your Mac?

  Reach

   > about this Mac

  

  your serial number (themine is deliberately obscured in the screenshot) should appear here.

  Do not you post, but it should be 11 characters

  BTW, a MacBook Pro does not iOS 9.2.1 is for phones and stamps. you want OS X.

• My new Canon 70 d is not recognized by Windows 10 anniversary.

  Anniversary of 10 Windows running under Parallels 12 on a new MacBook Pro.

  Plug my 6 d and that it appears in the devices.

  Plug my 7 d and it does NOT appear in the devices.

  I have two other (not Canon) cameras that work with Windows.

  Using the same USB cable for two Canon cameras. Even tried another cable.

  I have two new cameras: 6 d and 70 d.

  The 6 d is modified and cooled by DS Central.

  The 70 d is original.

  MacBook Pro with 16 GB of memory running macOS Sierra.

  Using the same cable for two cameras, EOS Utility 3 that was installed for the 6 d running.

  The 6 d is recognized by the works and EOS Utility 3.

  The 70 d is not many EOS Utility 3 or EOS Utility 2.

  And curiously, the 70 d is also not recognized by Windows 10 (update birthday, running under Parallels on the MacBook Pro 12).

• Windows XP does not recognize the iPhone - device not recognized error

  I am running Windows XP (SP2 I believe) and whenever I plug in my iPhone I get the error not recognized USB device. If iTunes does not recognize it and I can't sync. My guess is that I'm missing or have an updated driver, but I don't know how to install. If it makes a difference, I am using a brand new MacBook Pro and Windows XP via Parallels Desktop. I don't think it's the question, though, as I used to be able to sync with my Manager (ACT!) contacts via Outlook. It seems to be simply a function of Windows is not able to identify the iPhone via USB. A simple solution would be appreciated, but I'll take complicated if that's all that's available.

  Hello abogadopeter,

  Thank you for visiting the Microsoft answers community.

  This question has been a known issue that seems by Parallels. I did some research and read through some of the threads for workarounds. He doesn't seem to be a conclusive solution, but works to some extent. You can take a look at http://forum.parallels.com/search.php and simply search for ipod and look through some of these institutions.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Not recognized, yet all the numbers!

  My printer HP Photosmart C4400 all-in-One Series, model HP Photosmart C4480 has a number more than talking about the page How To and the video.

  Yes, the printer is actually in production (2008?) but I've only used out-of-the-box for 4 months in 2012 and then he is back in stock.  I just he carried out of the box, about a year later and of course had to install new ink.

  I wanted to check the printer was recorded (it is) and see if there are new driver updates, etc..

  and try to find out if it is to be on the noisy side is correct.

  I also need to know why, when I choose 'Set up', I got a window saying my device is not recognized, even if it is here, in the computer.  I can see it in the dock (MacBook Pro).  I wanted to do once more the printer by default - I had been driving on a friends through his cannon.

  Sticker on the bottom of the printer, left of the connecting cable has a number of "CN946M"... "more the barcode and the words"product of China ". On the right side of this vignette even longer numbers, which reads Q8383-6... [32].
  Then, on the bottom, to the front there is ANOTHER sticker that, aside from logos miners, gives the "regulatory model number", read "SNPRB-00"... ' and another number, the number of the product warranty, also begins with Q838, BUT this is different: "Q8388A.  NOTE: the other number (above) read 8383
  Above this vignette is a barcode with "Q8388 6"... "Still has another, different number and the words"Product of Singapore"
  On my 'Start Here' literature, there is a barcode at the bottom right that reads in part Q8383-9...

  then, friends of HP, which number is which?  And this a C-4400 or a C4480 printer?  And given that the warranty has expired for a long time even if its use is only 6 months old and the fact that I'm not "with it" with all the techno jargon (I had to seek that meant :-) OCR I would also like to know where to go (the lists are so long) for easy to request assistance.

  Thank you!!!

  Hi Cloudrowdy,

  I know by looking at the stickers on the printer can sometimes feel like watch the alphabet soup.

  Your product number is Q8388A, the printer is the all-in-one HP Photosmart C4480. The c4480 belongs to the serious c4400, I call the c4400 family and thinking about the c4480 as a cousin.

  The prescribed number is just a number of marketing necessary to make you worry about. The only other number may never need to is the serial number. Because the printer was made in China, the serial number will begin with CN and you should never the first 10 digits. I say this because it can be 14 digits in the serial number. Once again, alphabet soup! For security, I do not recommend that you never post your serial number on a public forum.

  Here is a link to HP Photosmart C4480 all-in-one printer support.

  This link will give you information for:

  • Drivers
  • Solve a problem
  • Getting started
  • How
  • Product information
  • User guides

  I hope it's useful. If there is nothing else or anything more specific, you want to help do not hesitate to inform MB.

• Nikon D5 and NAVE D500 files not "recognized by the raw format support in Lightroom"

  Hello

  I have a Nikon D5 and a D500 and I downloaded and update my Lightroom CC only 2 weeks ago on my MacBook Pro 2015. I just tried to update again, and he said his day. However, when you try to import NEF files in Lightroom the following message is displayed:

  "The files are not recognized by raw format support in Lightroom.

  

  Help, please!

  Kind regards

  Zhayynn James

  Two devices require at least 2015.5 CC in Lightroom.

  Devices supported by Camera Raw

  Please confirm which version of Lightroom you run

  Lightroom > on Lightroom

• "Lightroom_5_LS11_mac_5_7.dmg" for Mac update my Lightroom 5.6 (build 974614) but when I try to open it I get the error message "Lightroom_5_LS11_mac_5_7.dmg cannot open the disk image is not recognized. I am running OS 10 of Yosemite

  I downloaded "Lightroom_5_LS11_mac_5_7.dmg" for Mac that allows to update my Lightroom 5.6 (build 974614), but when I try to open it I get the error message "Lightroom_5_LS11_mac_5_7.dmg cannot open the disk image is not recognized. I am running Yosemite OS 10.10 on a Macbook Pro (retina, 13 inches, end 2012 with 2.9 GHz Intel Core i7 processor).

  Vk2mh looks that the download was not complete or corrupt.  When you download the update from?  Have you tried to download it again?

• CD/DVD drive not recognized inside the virtual machine

  No matter what I do, I can't get my VM (XP) to recognize the CD/DVD drive. I am running version 2.0.6 of merger and under Mac OS X (10.5.8) on a MacBook Pro. I did a right click on the CD icon in the lower right corner of the computer virtual window, then select 'connect' CD/DVD - I see while the disc turns black (which indicates it's supposed to be connected). I launch Windows Explorer in my virtual machine, but I do not see the CD/DVD drive listed anywhere! Help, please. I have the VM settings to connect to the physical CD/DVD (DVD-R MATSHITA UJ-875) drive. Thanks in advance.

  Take a look at: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs

• Webcam not recognized in Windows XP with VMware Fusion

  I use VMware Fusion 2.0 on a Macbook Pro with Windows XP.  I've been using Yahoo Messenger with the iSight webcam and I think I accidently deleted the icon at the bottom of the VMware window and now the web cam is not recognized in Windows at all.  The iSight camera works just fine under MacOS, but I can't find how to do Windows or VMware recognizes the camera.  I guess I could reinstall VMware and it might solve the problem but I'm looking for an easier route when it exists. Someone at - it a similar problem?

  Thank you

  Dennis

  Have you checked the settings of your virtual machine to see if the isight is activated must be forwarded to the VM?  You might consider checking or setting these options under usb.  Also if you have version 2.0 only then you can consider update 2.0.5 before reinstalling VMware.